Pavlo Samko 82f9486142 ramips: add support for TRENDnet TEW-638APB V2 ... This patch add support for the TRENDnet TEW-638APB V2. Specification: - SoC: Ralink SoC RT3052F - Flash: 4MB - RAM: 32MB - Ethernet: 1x LAN (100 Mbps) - Wireless: 2.4GHz b/g/n, 2x external antenna - Buttons: 1x Reset, 1x WPS - LEDs: Power (green), Ethernet (green), WPS (green and orange), Wireless (green) - UART: 1x UART on PCB (3.3V, GND, RX, TX) - 57600 8N1 Installation via vendor firmware: - upload sysupgrade.bin image via TFTP: - stop uboot into tftp-load into option "2" - upload sysupgrade.bin image Signed-off-by: Pavlo Samko <bulldozerbsg@gmail.com>		2017-06-17 15:38:19 +02:00
..
board.d	ramips: add support for TRENDnet TEW-638APB V2	2017-06-17 15:38:19 +02:00
hotplug.d	ramips: use the ralink,mtd-eeprom device tree property	2016-11-09 20:22:59 +01:00
init.d	Move enablemodem from ramips to new package adb-enablemodem and make it used also by TL-MR6400	2017-05-27 07:54:40 +02:00
uci-defaults	ramips: use rfkill for wps button on wlan only boards	2016-10-15 09:01:45 +02:00
diag.sh	ramips: add support for TRENDnet TEW-638APB V2	2017-06-17 15:38:19 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00