KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/lantiq/image/Makefile
Mathias Kresin 0b62fe5ed8 lantiq: complete AVM FRITZ!Box 3370 support 
Rename the image and use a compatible string which indicates that only
hardware revision 2 and higher is supported.

It allows to use the wireless LED, as HWRev 1 uses GPIO#39 for the
wireless LED and starting with HWRev 2 GPIO#35 is used for the wireless
LED and GPIO#39 for IFX_GPIO_MODULE_EXTPHY_MDIO.

The HWREV can be checked by connecting to the fritzbox right after power
on via ftp:

  ftp> quote GETENV HWSubRevision

Within the same HW revision 5 of the Fritz!Box 3370 different NAND flash
chips are used. Usually it isn't a big deal but depending on the used
NAND flash chip, the ECC calculation is done different (and incompatible
of course).

Boards with a Micron MT29F1G08ABADA NAND flash chip are using the NAND
chip to calculate the ECC (on-die). Boards with a Hynix HY27UF081G2M NAND
flash chip are doing the ECC calculation in software.

Supporting both with a single DTS isn't possible. It might be possible
to add a patch selecting the ECC mode dynamicaly based on the found NAND
flash chip. But such a patch has no chance to get accepted upstream and
most likely need to be touched with every kernel update.

Instead two images are created. One for Micron NAND flash chip and one
for Hynix NAND flash chip. So far no pattern is known to identify the
used flash chip without opening the box.

Add the power off GPIO. At least EVA version 2186 sets/keeps the GPIO as
input, which will cause a reboot 30sec after power on. For boards with
EVA version 2186 the installation is tricky as it has to be finished
within the 30sec time frame.

The EVA version can be checked by connecting to the fritzbox right after
power on via ftp:

  ftp> quote GETENV urlader-version

The ath9k eeprom/caldata is at a different and offset and stored in
reverse order (from the last byte to the beginning) on the flash.
Reverse the bits to bring the data into the format expected by the
ath9k driver.

Since the ath9k eeprom is stored in reverse order on flash, we can not
use the mac address from the on flash eeprom. Get the MAC address from
the tffs instead.

Within the same HW revision 5 of the Fritz!Box 3370 both version of the
vr9 SoC are used. During preparation of kernel 4.14 support, all
devicetree source files were changed to load the vr9 v1.1 and vr9 v1.2
gphy firmware, which fixed the embedded phys for boards using the
version 1.2 of the vr9 SoC.

While at it, add a trigger to make use of the LAN LED. Setup the
build-in switch and add a hint for LuCI two show the ports in order
matching the labels on the case

Add support for the second USB port and provide the volatage GPIOs. Use
GPIO#21 as PCIe reset pin. The lan led is connected to GPIO#38.

Name the rootfs partition ubi and remove the mtd/rootfs related kernel
bootargs to use the OpenWrt autoprobing based on the partition name.

Enable sysupgrade support to allow an upgrade from a running system.
Since sysupgrade wasn't supported till now, drop image build code which
was added to allow a sysupgrade from earlier OpenWrt versions.

Build images that allow an (initial) installation via EVA bootloader.

To install OpenWrt via Eva bootloader, within the first seconds after
power on a ftp connection need to be established to the FRITZ!Box at
192.168.178.1 and the the following ftp commands need to be run:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote SETENV linux_fs_start 0
  ftp> quote MEDIA FLSH
  ftp> put /path/to/openwrt-lantiq-xrx200-FRITZ3370-eva-kernel.bin mtd1
  ftp> put /path/to/openwrt-lantiq-xrx200-FRITZ3370-eva-filesystem.bin mtd0

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-05-17 07:40:19 +02:00

811 lines
24 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2010-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# boards missing since devicetree update
#EASY50712 ARV3527P
KERNEL_LOADADDR = 0x80002000
KERNEL_ENTRY = 0x80002000
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
ifeq ($(SUBTARGET),xway)
UBIFS_OPTS := -m 512 -e 15872 -c 1959
else
UBIFS_OPTS := -m 2048 -e 126KiB -c 4096
endif
define Build/append-avm-fakeroot
cat ./eva.dummy.squashfs >> $@
endef
define Build/dgn3500-sercom-footer
$(STAGING_DIR_HOST)/bin/dgn3500sum $@ $(1) $(2)
endef
define Build/mkbrncmdline
mkbrncmdline -i $@ -o $@.new BRN-BOOT
mv $@.new $@
endef
define Build/mkbrnimg
mkbrnimg -s $(SIGNATURE) -m $(MAGIC) -p $(CRC32_POLY) -o $@ $(IMAGE_KERNEL) $(IMAGE_ROOTFS)
endef
define Build/fullimage
mkimage -A mips -O linux -C lzma -T filesystem -a 0x00 \
-e 0x00 -n '$(VERSION_DIST) RootFS' \
-d $(IMAGE_ROOTFS) $(IMAGE_ROOTFS).new
cat $(IMAGE_KERNEL) $(IMAGE_ROOTFS).new > $@.tmp
mkimage -A mips -O linux -T multi -a 0x00 -C none \
-e 0x00 -n 'OpenWrt fullimage' \
-d $@.tmp $@
rm $(IMAGE_ROOTFS).new
rm $@.tmp
endef
# Shared device definition: applies to every defined device
define Device/Default
PROFILES = Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
FILESYSTEMS := squashfs
IMAGE_SIZE :=
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += IMAGE_SIZE
define Device/NAND/xway
BLOCKSIZE := 16k
PAGESIZE := 512
SUBPAGESIZE := 256
FILESYSTEMS += ubifs
endef
define Device/NAND/xrx200
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
FILESYSTEMS += ubifs
endef
define Device/NAND
$(Device/NAND/$(SUBTARGET))
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/lantiqBrnImage
KERNEL := kernel-bin | append-dtb | mkbrncmdline | lzma-no-dict
IMAGES := factory.bin
IMAGE/factory.bin := mkbrnimg | check-size $$$$(IMAGE_SIZE)
endef
DEVICE_VARS += SIGNATURE MAGIC CRC32_POLY
define Device/lantiqFullImage
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-offset 4 0
IMAGES := sysupgrade.bin fullimage.bin
IMAGE/fullimage.bin := fullimage | check-size $$$$(IMAGE_SIZE)
endef
define Device/AVM
KERNEL := kernel-bin | append-dtb | lzma | eva-image
KERNEL_INITRAMFS := $$(KERNEL)
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-avm-fakeroot | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
ifeq ($(SUBTARGET),ase)
define Device/allnet_all0333cj
IMAGE_SIZE := 3700k
DEVICE_DTS := ALL0333CJ
DEVICE_TITLE := Allnet ALL0333CJ
DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
ltq-adsl-app ppp-mod-pppoe
endef
TARGET_DEVICES += allnet_all0333cj
define Device/netgear_dgn1000b
IMAGE_SIZE := 6000k
DEVICE_DTS := DGN1000B
DEVICE_TITLE := Netgear DGN1000B
DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
ltq-adsl-app ppp-mod-pppoe
SUPPORTED_DEVICES += DGN1000B
endef
TARGET_DEVICES += netgear_dgn1000b
endif
ifeq ($(SUBTARGET),xway_legacy)
define Device/arcadyan_arv4520pw
IMAGE_SIZE := 3648k
DEVICE_DTS := ARV4520PW
DEVICE_TITLE := Easybox 800, WAV-281 - ARV4520PW
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-rt61-pci wpad-mini
SUPPORTED_DEVICES += ARV4520PW
endef
TARGET_DEVICES += arcadyan_arv4520pw
define Device/arcadyan_arv4525pw
IMAGE_SIZE := 3776k
DEVICE_DTS := ARV4525PW
DEVICE_TITLE := Speedport W502V Typ A - ARV4525PW
DEVICE_PACKAGES := kmod-ath5k wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa -swconfig
SUPPORTED_DEVICES += ARV4525PW
endef
TARGET_DEVICES += arcadyan_arv4525pw
define Device/arcadyan_arv452cqw
IMAGE_SIZE := 3776k
DEVICE_DTS := ARV452CQW
DEVICE_TITLE := Easybox 801 - ARV452CQW
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath5k wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa
SUPPORTED_DEVICES += ARV452CQW
endef
TARGET_DEVICES += arcadyan_arv452cqw
define Device/arcadyan_arv4518pwr01
IMAGE_SIZE := 3776k
DEVICE_DTS := ARV4518PWR01
DEVICE_TITLE := ARV4518PWR01
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath5k wpad-mini
SUPPORTED_DEVICES += ARV4518PWR01
endef
TARGET_DEVICES += arcadyan_arv4518pwr01
define Device/arcadyan_arv4518pwr01a
IMAGE_SIZE := 3776k
DEVICE_DTS := ARV4518PWR01A
DEVICE_TITLE := ARV4518PWR01A
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath5k wpad-mini
SUPPORTED_DEVICES += ARV4518PWR01A
endef
TARGET_DEVICES += arcadyan_arv4518pwr01a
endif
ifeq ($(SUBTARGET),xway)
# Danube
define Device/bt_homehub-v2b
$(Device/NAND)
BOARD_NAME := BTHOMEHUBV2B
DEVICE_DTS := BTHOMEHUBV2B
DEVICE_TITLE := BT Home Hub 2B
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
kmod-ltq-deu-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k kmod-owl-loader wpad-mini
SUPPORTED_DEVICES += BTHOMEHUBV2B
endef
TARGET_DEVICES += bt_homehub-v2b
define Device/lantiq_easy50712
DEVICE_DTS := EASY50712
IMAGE_SIZE := 3776k
DEVICE_TITLE := Lantiq Danube - EASY50712
endef
TARGET_DEVICES += lantiq_easy50712
define Device/audiocodes_mp-252
IMAGE_SIZE := 14848k
DEVICE_DTS := ACMP252
DEVICE_TITLE := AudioCodes MediaPack MP-252
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-usb-ledtrig-usbport kmod-usb-dwc2 \
kmod-rt2800-pci \
ltq-adsl-app ppp-mod-pppoa \
wpad-mini
SUPPORTED_DEVICES += ACMP252
endef
TARGET_DEVICES += audiocodes_mp-252
define Device/arcadyan_arv4510pw
IMAGE_SIZE := 15616k
DEVICE_DTS := ARV4510PW
DEVICE_TITLE := Wippies, Elisa - ARV4510PW
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport kmod-usb2-pci kmod-usb-uhci \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci kmod-ath5k wpad-mini
SUPPORTED_DEVICES += ARV4510PW
endef
TARGET_DEVICES += arcadyan_arv4510pw
define Device/arcadyan_arv7525pw
IMAGE_SIZE := 3776k
DEVICE_DTS := ARV4510PW
DEVICE_TITLE := Speedport W303V Typ A - ARV7525PW
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa -swconfig
SUPPORTED_DEVICES += ARV4510PW
endef
TARGET_DEVICES += arcadyan_arv7525pw
define Device/arcadyan_arv4519pw
IMAGE_SIZE := 3776k
DEVICE_DTS := ARV4519PW
DEVICE_TITLE := Vodafone, Pirelli - ARV4519PW
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa
SUPPORTED_DEVICES += ARV4519PW
endef
TARGET_DEVICES += arcadyan_arv4519pw
define Device/arcadyan_arv7506pw11
IMAGE_SIZE := 7808k
DEVICE_DTS := ARV7506PW11
DEVICE_TITLE := Alice/O2 IAD 4421 - ARV7506PW11
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-rt2800-pci wpad-mini
SUPPORTED_DEVICES += ARV7506PW11
endef
TARGET_DEVICES += arcadyan_arv7506pw11
define Device/arcadyan_arv7510pw22
IMAGE_SIZE := 31232k
DEVICE_DTS := ARV7510PW22
DEVICE_TITLE := Astoria - ARV7510PW22
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci wpad-mini \
kmod-usb-uhci kmod-usb2 kmod-usb2-pci
SUPPORTED_DEVICES += ARV7510PW22
endef
TARGET_DEVICES += arcadyan_arv7510pw22
define Device/arcadyan_arv7518pw
IMAGE_SIZE := 7872k
DEVICE_DTS := ARV7518PW
DEVICE_TITLE := Astoria - ARV7518PW
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k kmod-owl-loader wpad-mini
SUPPORTED_DEVICES += ARV7518PW
endef
TARGET_DEVICES += arcadyan_arv7518pw
define Device/arcadyan_arv7519pw
IMAGE_SIZE := 15488k
DEVICE_DTS := ARV7519PW
DEVICE_TITLE := Astoria - ARV7519PW
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-rt2800-pci wpad-mini
SUPPORTED_DEVICES += ARV7519PW
endef
TARGET_DEVICES += arcadyan_arv7519pw
define Device/arcadyan_arv752dpw
IMAGE_SIZE := 7872k
DEVICE_DTS := ARV752DPW
DEVICE_TITLE := Easybox 802 - ARV752DPW
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci wpad-mini
SUPPORTED_DEVICES += ARV752DPW
endef
TARGET_DEVICES += arcadyan_arv752dpw
define Device/arcadyan_arv752dpw22
IMAGE_SIZE := 7616k
DEVICE_DTS := ARV752DPW22
DEVICE_TITLE := Easybox 803 - ARV752DPW22
DEVICE_PACKAGES := kmod-usb2-pci kmod-usb-uhci kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-tapi kmod-ltq-vmmc \
kmod-rt2800-pci wpad-mini
SUPPORTED_DEVICES += ARV752DPW22
endef
TARGET_DEVICES += arcadyan_arv752dpw22
define Device/arcadyan_arv8539pw22
IMAGE_SIZE := 7616k
DEVICE_DTS := ARV8539PW22
DEVICE_TITLE := Speedport W504V Typ A - ARV8539PW22
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k kmod-owl-loader wpad-mini
SUPPORTED_DEVICES += ARV8539PW22
endef
TARGET_DEVICES += arcadyan_arv8539pw22
define Device/siemens_gigaset-sx76x
IMAGE_SIZE := 7680k
DEVICE_DTS := GIGASX76X
DEVICE_TITLE := Gigaset sx76x
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoe \
kmod-ath5k wpad-mini
SUPPORTED_DEVICES += GIGASX76X
endef
TARGET_DEVICES += siemens_gigaset-sx76x
# AR9
define Device/bt_homehub-v3a
$(Device/NAND)
BOARD_NAME := BTHOMEHUBV3A
DEVICE_DTS := BTHOMEHUBV3A
DEVICE_TITLE := BT Home Hub 3A
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
kmod-ltq-deu-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k kmod-owl-loader wpad-mini \
uboot-envtools
SUPPORTED_DEVICES += BTHOMEHUBV3A
endef
TARGET_DEVICES += bt_homehub-v3a
DGN3500_KERNEL_OFFSET_HEX=0x50000
DGN3500_KERNEL_OFFSET_DEC=327680
define Device/netgear_dgn3500
DEVICE_DTS := DGN3500
IMAGE_SIZE := 16000k
IMAGES := \
sysupgrade-na.bin sysupgrade.bin \
factory-na.img factory.img
IMAGE/sysupgrade-na.bin := \
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "NA" | \
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := \
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "WW" | \
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory-na.img := \
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "NA" | pad-rootfs | \
check-size 16320k | pad-to 16384k
IMAGE/factory.img := \
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "WW" | pad-rootfs | \
check-size 16320k | pad-to 16384k
DEVICE_TITLE := Netgear DGN3500
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath9k kmod-owl-loader wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9
SUPPORTED_DEVICES += DGN3500
endef
TARGET_DEVICES += netgear_dgn3500
define Device/netgear_dgn3500b
DEVICE_DTS := DGN3500B
IMAGE_SIZE := 16000k
IMAGES += factory.img
IMAGE/sysupgrade.bin := \
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "DE" | \
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := \
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "DE" | pad-rootfs | \
check-size 16320k | pad-to 16384k
DEVICE_TITLE := Netgear DGN3500B
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath9k kmod-owl-loader wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9
SUPPORTED_DEVICES += DGN3500B
endef
TARGET_DEVICES += netgear_dgn3500b
define Device/buffalo_wbmr-hp-g300h-a
IMAGE_SIZE := 31488k
DEVICE_DTS := WBMR
DEVICE_TITLE := Buffalo WBMR-HP-G300H (A) - WBMR
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k kmod-owl-loader wpad-mini
SUPPORTED_DEVICES := WBMR buffalo,wbmr-hp-g300h
endef
TARGET_DEVICES += buffalo_wbmr-hp-g300h-a
define Device/buffalo_wbmr-hp-g300h-b
IMAGE_SIZE := 31488k
DEVICE_DTS := WBMR
DEVICE_TITLE := Buffalo WBMR-HP-G300H (B) - WBMR
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ath9k kmod-owl-loader wpad-mini
SUPPORTED_DEVICES := WBMR buffalo,wbmr-hp-g300h
endef
TARGET_DEVICES += buffalo_wbmr-hp-g300h-b
define Device/avm_fritz7320
$(Device/AVM)
DEVICE_DTS := FRITZ7320
IMAGE_SIZE := 15744k
DEVICE_TITLE := 1&1 HomeServer - FRITZ7320
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoa \
kmod-ltq-deu-ar9 kmod-usb-dwc2 -swconfig
SUPPORTED_DEVICES += FRITZ7320
endef
TARGET_DEVICES += avm_fritz7320
define Device/zte_h201l
IMAGE_SIZE := 7808k
DEVICE_DTS := H201L
DEVICE_TITLE := ZTE H201L - H201L
DEVICE_PACKAGES := kmod-ath9k-htc wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoe \
kmod-ltq-deu-ar9 kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += H201L
endef
TARGET_DEVICES += zte_h201l
define Device/zyxel_p-2601hn
IMAGE_SIZE := 15616k
DEVICE_DTS := P2601HNFX
DEVICE_TITLE := ZyXEL P-2601HN-Fx
DEVICE_PACKAGES := kmod-rt2800-usb wpad-mini \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
ltq-adsl-app ppp-mod-pppoe \
kmod-ltq-deu-ar9 kmod-usb-dwc2
SUPPORTED_DEVICES += P2601HNFX
endef
TARGET_DEVICES += zyxel_p-2601hn
endif
ifeq ($(SUBTARGET),xrx200)
# VR9
define Device/zyxel_p-2812hnu-f1
$(Device/NAND)
BOARD_NAME := P2812HNUF1
DEVICE_DTS := P2812HNUF1
DEVICE_TITLE := ZyXEL P-2812HNU-F1
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += P2812HNUF1
endef
TARGET_DEVICES += zyxel_p-2812hnu-f1
define Device/zyxel_p-2812hnu-f3
$(Device/NAND)
BOARD_NAME := P2812HNUF3
DEVICE_DTS := P2812HNUF3
DEVICE_TITLE := ZyXEL P-2812HNU-F3
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
SUPPORTED_DEVICES += P2812HNUF3
endef
TARGET_DEVICES += zyxel_p-2812hnu-f3
define Device/arcadyan_arv7519rw22
IMAGE_SIZE := 31232k
DEVICE_DTS := ARV7519RW22
DEVICE_TITLE := Livebox Astoria ARV7519RW22
DEVICE_PACKAGES := kmod-usb-dwc2
SUPPORTED_DEVICES += ARV7519RW22
endef
TARGET_DEVICES += arcadyan_arv7519rw22
define Device/alphanetworks_asl56026
DEVICE_DTS := ASL56026
IMAGE_SIZE := 7488k
DEVICE_TITLE := BT OpenReach - ECI VDSL Modem V-2FUb/I
endef
TARGET_DEVICES += alphanetworks_asl56026
define Device/bt_homehub-v5a
$(Device/NAND)
BOARD_NAME := BTHOMEHUBV5A
DEVICE_DTS := BTHOMEHUBV5A
DEVICE_TITLE := BT Home Hub 5A
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \
kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
SUPPORTED_DEVICES += BTHOMEHUBV5A
endef
TARGET_DEVICES += bt_homehub-v5a
define Device/netgear_dm200
DEVICE_DTS := DM200
IMAGES := sysupgrade.bin factory.img
IMAGE/sysupgrade.bin := append-kernel | \
pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
IMAGE_SIZE := 7872k
DEVICE_TITLE := Netgear DM200
NETGEAR_BOARD_ID := DM200
NETGEAR_HW_ID := 29765233+8+0+64+0+0
endef
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
TARGET_DEVICES += netgear_dm200
define Device/lantiq_easy80920-nand
$(Device/lantiqFullImage)
DEVICE_DTS := EASY80920NAND
IMAGE_SIZE := 64512k
DEVICE_TITLE := Lantiq VR9 - EASY80920NAND
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += lantiq_easy80920-nand
define Device/lantiq_easy80920-nor
DEVICE_DTS := EASY80920NOR
IMAGE_SIZE := 7936k
DEVICE_TITLE := Lantiq VR9 - EASY80920NOR
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += lantiq_easy80920-nor
define Device/avm_fritz3370
$(Device/AVM)
$(Device/NAND)
DEVICE_DTS := FRITZ3370
DEVICE_TITLE := AVM Fritz!Box WLan 3370 Rev. 2
KERNEL_SIZE := 4096k
UBINIZE_OPTS := -E 5
IMAGES += eva-kernel.bin eva-filesystem.bin
IMAGE/eva-kernel.bin := append-kernel
IMAGE/eva-filesystem.bin := append-ubi
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 fritz-tffs
endef
define Device/avm_fritz3370-rev2-hynix
$(Device/avm_fritz3370)
DEVICE_DTS := FRITZ3370-REV2-HYNIX
DEVICE_TITLE := AVM Fritz!Box WLan 3370 Rev. 2 (Hynix NAND)
endef
TARGET_DEVICES += avm_fritz3370-rev2-hynix
define Device/avm_fritz3370-rev2-micron
$(Device/avm_fritz3370)
DEVICE_DTS := FRITZ3370-REV2-MICRON
DEVICE_TITLE := AVM Fritz!Box WLan 3370 Rev. 2 (Micron NAND)
endef
TARGET_DEVICES += avm_fritz3370-rev2-micron
define Device/avm_fritz7360sl
$(Device/AVM)
IMAGE_SIZE := 15744k
DEVICE_DTS := FRITZ7360SL
DEVICE_TITLE := 1&1 HomeServer - FRITZ7360SL
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2
SUPPORTED_DEVICES += FRITZ7360SL
endef
TARGET_DEVICES += avm_fritz7360sl
define Device/arcadyan_vg3503j
IMAGE_SIZE := 8000k
DEVICE_DTS := VG3503J
DEVICE_TITLE := BT OpenReach - ECI VDSL Modem V-2FUb/R
SUPPORTED_DEVICES += VG3503J
endef
TARGET_DEVICES += arcadyan_vg3503j
include tp-link.mk
define Device/buffalo_wbmr-300hpd
IMAGE_SIZE := 15616k
DEVICE_DTS := WBMR300
DEVICE_TITLE := Buffalo WBMR-300HPD
DEVICE_PACKAGES := kmod-mt7603 wpad-mini kmod-usb-dwc2
SUPPORTED_DEVICES += WBMR300
endef
TARGET_DEVICES += buffalo_wbmr-300hpd
define Device/arcadyan_vgv7510kw22-nor
IMAGE_SIZE := 15232k
DEVICE_DTS := VGV7510KW22NOR
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (NOR)
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += VGV7510KW22NOR
endef
TARGET_DEVICES += arcadyan_vgv7510kw22-nor
define Device/arcadyan_vgv7510kw22-brn
$(Device/lantiqBrnImage)
IMAGE_SIZE := 7168k
DEVICE_DTS := VGV7510KW22BRN
SIGNATURE := BRNDA6431
MAGIC := 0x12345678
CRC32_POLY := 0x04c11db7
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (BRN)
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += VGV7510KW22BRN
endef
TARGET_DEVICES += arcadyan_vgv7510kw22-brn
define Device/arcadyan_vgv7519-nor
IMAGE_SIZE := 15360k
DEVICE_DTS := VGV7519NOR
DEVICE_TITLE := Experiabox 8 VGV7519
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += VGV7519NOR
endef
TARGET_DEVICES += arcadyan_vgv7519-nor
define Device/arcadyan_vgv7519-brn
$(Device/lantiqBrnImage)
IMAGE_SIZE := 7168k
DEVICE_DTS := VGV7519BRN
SIGNATURE := 5D00008000
MAGIC := 0x12345678
CRC32_POLY := 0x2083b8ed
DEVICE_TITLE := Experiabox 8 VGV7519 (BRN)
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += VGV7519BRN
endef
TARGET_DEVICES += arcadyan_vgv7519-brn
endif
ifeq ($(SUBTARGET),falcon)
define Device/lantiq_easy98000-nor
IMAGE_SIZE := 3904k
DEVICE_DTS := EASY98000NOR
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NOR
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
endef
TARGET_DEVICES += lantiq_easy98000-nor
define Device/lantiq_easy98000-nand
IMAGE_SIZE := 3904k
DEVICE_DTS := EASY98000NAND
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NAND
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
endef
TARGET_DEVICES += lantiq_easy98000-nand
define Device/lantiq_easy98000-sflash
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY98000SFLASH
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board SFLASH
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
endef
TARGET_DEVICES += lantiq_easy98000-sflash
define Device/lantiq_falcon-mdu
IMAGE_SIZE := 7424k
DEVICE_DTS := FALCON-MDU
DEVICE_TITLE := MDU - Lantiq Falcon / VINAXdp MDU Board
endef
TARGET_DEVICES += lantiq_falcon-mdu
define Device/lantiq_easy88388
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY88388
DEVICE_TITLE := EASY88388 - Lantiq Falcon FTTDP8 Reference Board
endef
TARGET_DEVICES += lantiq_easy88388
define Device/lantiq_easy88444
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY88444
DEVICE_TITLE := EASY88444 - Lantiq Falcon FTTdp G.FAST Reference Board
endef
TARGET_DEVICES += lantiq_easy88444
define Device/lantiq_falcon-sfp
IMAGE_SIZE := 7424k
DEVICE_DTS := FALCON-SFP
DEVICE_TITLE := SFP - Lantiq Falcon SFP Stick
endef
TARGET_DEVICES += lantiq_falcon-sfp
define Device/lantiq_easy98035synce
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY98035SYNCE
DEVICE_TITLE := EASY98035SYNCE - Lantiq Falcon SFP Stick with Synchronous Ethernet
endef
TARGET_DEVICES += lantiq_easy98035synce
define Device/lantiq_easy98035synce1588
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY98035SYNCE1588
DEVICE_TITLE := EASY98035SYNCE1588 - Lantiq Falcon SFP Stick with SyncE and IEEE1588
endef
TARGET_DEVICES += lantiq_easy98035synce1588
define Device/lantiq_easy98020
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY98020
DEVICE_TITLE := EASY98020 - Lantiq Falcon SFU Reference Board
endef
TARGET_DEVICES += lantiq_easy98020
define Device/lantiq_easy98020-v18
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY98020V18
DEVICE_TITLE := EASY98020V18 - Lantiq Falcon SFU Reference Board V1.8
endef
TARGET_DEVICES += lantiq_easy98020-v18
define Device/lantiq_easy98021
IMAGE_SIZE := 7424k
DEVICE_DTS := EASY98021
DEVICE_TITLE := EASY98021 - Lantiq Falcon HGU Reference Board
endef
TARGET_DEVICES += lantiq_easy98021
endif
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink