openwrtv3/target/linux/lantiq/dts/FRITZ3370.dts
blogic b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00

275 lines
5.1 KiB
Text

/dts-v1/;
/include/ "vr9.dtsi"
/ {
model = "FRITZ3370 - Fritz!Box WLAN 3370";
chosen {
bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
leds {
boot = &power_green;
failsafe = &power_red;
running = &power_green;
dsl = &dsl;
internet = &info_green;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "gen_nand", "lantiq,nand-xway";
bank-width = <2>;
reg = <1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "rootfs_ubi";
reg = <0x400000 0x3000000>;
};
partition@3400000 {
label = "vr9_firmware";
reg = <0x3400000 0x400000>;
};
partition@3800000 {
label = "reserved";
reg = <0x3800000 0x3000000>;
};
partition@6800000 {
label = "config";
reg = <0x6800000 0x200000>;
};
partition@6a00000 {
label = "nand-filesystem";
reg = <0x6a00000 0x1600000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
nand {
lantiq,groups = "nand cle", "nand ale",
"nand rd", "nand cs1", "nand rdy";
lantiq,function = "ebu";
lantiq,pull = <1>;
};
phy-rst {
lantiq,pins = "io37", "io44";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 5 0
&gpio 14 0>;
lantiq,portmask = <0x3>;
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x985>;
ath,eep-endian;
ath,eep-swap;
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/vr9_phy11g_a1x.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
power {
label = "power";
gpios = <&gpio 1 0>;
linux,code = <0x100>;
};
/* wifi {
label = "wifi";
gpios = <&gpio 29 0>;
linux,code = <0x101>;
};*/
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "fritz3370:green:power";
gpios = <&gpio 32 1>;
default-state = "keep";
};
power_red: power2 {
label = "fritz3370:red:power";
gpios = <&gpio 33 1>;
};
info_red {
label = "fritz3370:red:info";
gpios = <&gpio 34 1>;
};
wifi: wifi {
label = "fritz3370:green:wlan";
gpios = <&gpio 35 1>;
};
dsl: dsl {
label = "fritz3370:green:dsl";
gpios = <&gpio 36 1>;
};
lan {
label = "fritz3370:green:lan";
gpios = <&gpio 38 1>;
};
info_green: info_green {
label = "fritz3370:green:info";
gpios = <&gpio 47 1>;
};
};
};
&spi {
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
status = "ok";
m25p80@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <1000000>;
ath9k_cal: partition@0 {
reg = <0x0 0x20000>;
label = "urlader";
read-only;
};
partition@20000 {
reg = <0x20000 0x10000>;
label = "tffs (1)";
read-only;
};
partition@30000 {
reg = <0x30000 0x10000>;
label = "tffs (2)";
read-only;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gpios = <&gpio 37 0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
gpios = <&gpio 44 0>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@3 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};