openwrtv3/target/linux/lantiq/dts/ARV7519PW.dts
blogic b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00

229 lines
3.7 KiB
Text

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV7519PW - Astoria Networks";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power;
failsafe = &power2;
running = &power;
dsl = &dsl;
internet = &online;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xf80000>;
};
partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0xfe0016 0x6>;
mac-increment = <2>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
switch_rst {
lantiq,pins = "io19";
lantiq,pull = <2>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
};
/* warning: passive port
only works with active devices */
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 0>;
req-mask = <0xf>;
};
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 1>;
linux,code = <0xf7>;
};
reset {
label = "reset";
gpios = <&gpio 28 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpio 2 1>;
default-state = "keep";
};
power2: power2 {
label = "power2";
gpios = <&gpio 14 1>;
};
online: online {
label = "online";
gpios = <&gpio 3 1>;
};
online2 {
label = "online2";
gpios = <&gpio 30 1>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpio 12 1>;
};
wifi2 {
label = "wifi2";
gpios = <&gpio 10 1>;
};
wifi3 {
label = "wifi3";
gpios = <&gpio 6 1>;
};
voice {
label = "voice";
gpios = <&gpio 31 1>;
};
wps {
label = "wps";
gpios = <&gpio 15 1>;
};
wps2 {
label = "wps2";
gpios = <&gpio 7 1>;
};
wps3 {
label = "wps3";
gpios = <&gpio 23 1>;
};
dsl: dsl {
label = "dsl";
gpios = <&gpio 4 1>;
};
lan {
label = "lan";
gpios = <&gpio 1 1>;
};
tv {
label = "tv";
gpios = <&gpio 20 1>;
};
upgrade {
label = "upgrade";
gpios = <&gpio 29 1>;
};
};
/* is there another way to "reserve" the GPIO? */
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
gpios = <&gpio 19 0>;
};
};
};