openwrtv3/target/linux/ramips/dts/RT-N15.dts
John Crispin 553fea9f19 ramips: fix indentation and other mistakes in .dts{, i} files
The following patch fixes:
 * wrong indentations
 * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
 * duplicate spacings
 * empty lines at end of files and after last child nodes
 * trailing and leading whitespace
 * unnecessary and commented-out code
 * missing empty lines between nodes and between properties and nodes
 * unnecessary empty lines between nodes properties [1]

in .dts{,i} files, for ramips target.

[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46613
2015-08-17 05:57:18 +00:00

113 lines
1.7 KiB
Text

/dts-v1/;
/include/ "rt2880.dtsi"
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "RT-N15", "ralink,rt2880-soc";
model = "Asus RT-N15";
palmbus@300000 {
gpio0: gpio@600 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartlite", "mdio";
ralink,function = "gpio";
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
ethernet@400000 {
status = "okay";
mtd-mac-address = <&factory 0x4>;
port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
};
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
};
wmac@480000 {
ralink,mtd-eeprom = <&factory 0>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio0 0 0>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio0 12 0>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "rt-n15:blue:power";
gpios = <&gpio0 11 1>;
};
};
};