Mathias Kresin 7dd42d610d lantiq: add FRITZ7360SL phy reset gpios ... Due to a hardware bug of Atheros 8030 phys, the driver need to reset the phys on link state change. Use the correct compatible string for the at903x phys connected to switch port 0 and 1. Fix the pinmux of the gpio lines connected to the reset pin of the phys and define the reset-pins to let the driver do the fixups. Fixes FS#343 Signed-off-by: Mathias Kresin <dev@kresin.me>		2016-12-24 10:03:38 +01:00
..
base-files	lantiq: simplify ath9k eeprom extraction script	2016-12-08 19:36:53 +01:00
dts	lantiq: add FRITZ7360SL phy reset gpios	2016-12-24 10:03:38 +01:00
falcon	lantiq: add Falcon support	2016-11-27 17:40:20 +01:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: use ath9k device tree bindings binding/owl-loader	2016-11-29 21:40:16 +01:00
patches-4.4	kernel: bump to 4.4.36	2016-12-04 12:31:30 +01:00
xrx200	lantiq: add vpe/watchdog modules to kernel	2016-10-31 16:51:33 +01:00
xway	lantiq: add swconfig to the default packages	2016-11-27 15:34:23 +01:00
xway_legacy	lantiq: add swconfig to the default packages	2016-11-27 15:34:23 +01:00
config-4.4	lantiq: add cpu temperatur sensor driver for xrx200	2016-08-03 15:30:13 +02:00
Makefile	lantiq: add Falcon support	2016-11-27 17:40:20 +01:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00