openwrtv3/target/linux/brcm2708/patches-4.9/950-0023-watchdog-bcm2835-Support-setting-reboot-partition.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

124 lines
4.3 KiB
Diff

From 0e690096e05c3b4e806381ff38124dbdae3ba877 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
Date: Fri, 7 Oct 2016 16:50:59 +0200
Subject: [PATCH] watchdog: bcm2835: Support setting reboot partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The Raspberry Pi firmware looks at the RSTS register to know which
partition to boot from. The reboot syscall command
LINUX_REBOOT_CMD_RESTART2 supports passing in a string argument.
Add support for passing in a partition number 0..63 to boot from.
Partition 63 is a special partiton indicating halt.
If the partition doesn't exist, the firmware falls back to partition 0.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/watchdog/bcm2835_wdt.c | 61 +++++++++++++++++++++++++-----------------
1 file changed, 36 insertions(+), 25 deletions(-)
--- a/drivers/watchdog/bcm2835_wdt.c
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -35,13 +35,7 @@
#define PM_RSTC_WRCFG_SET 0x00000030
#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
#define PM_RSTC_RESET 0x00000102
-
-/*
- * The Raspberry Pi firmware uses the RSTS register to know which partiton
- * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10.
- * Partiton 63 is a special partition used by the firmware to indicate halt.
- */
-#define PM_RSTS_RASPBERRYPI_HALT 0x555
+#define PM_RSTS_PARTITION_CLR 0xfffffaaa
#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
@@ -111,15 +105,28 @@ static struct watchdog_device bcm2835_wd
.timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
};
-static int
-bcm2835_restart(struct notifier_block *this, unsigned long mode, void *cmd)
+/*
+ * The Raspberry Pi firmware uses the RSTS register to know which partiton
+ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10.
+ * Partiton 63 is a special partition used by the firmware to indicate halt.
+ */
+
+static void bcm2835_restart(struct bcm2835_wdt *wdt, u8 partition)
{
- struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt,
- restart_handler);
- u32 val;
+ u32 val, rsts;
+
+ rsts = (partition & BIT(0)) | ((partition & BIT(1)) << 1) |
+ ((partition & BIT(2)) << 2) | ((partition & BIT(3)) << 3) |
+ ((partition & BIT(4)) << 4) | ((partition & BIT(5)) << 5);
+
+ val = readl_relaxed(wdt->base + PM_RSTS);
+ val &= PM_RSTS_PARTITION_CLR;
+ val |= PM_PASSWORD | rsts;
+ writel_relaxed(val, wdt->base + PM_RSTS);
/* use a timeout of 10 ticks (~150us) */
writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG);
+
val = readl_relaxed(wdt->base + PM_RSTC);
val &= PM_RSTC_WRCFG_CLR;
val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
@@ -127,6 +134,20 @@ bcm2835_restart(struct notifier_block *t
/* No sleeping, possibly atomic. */
mdelay(1);
+}
+
+static int bcm2835_restart_notifier_call(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt,
+ restart_handler);
+ unsigned long long val;
+ u8 partition = 0;
+
+ if (cmd && !kstrtoull(cmd, 0, &val) && val <= 63)
+ partition = val;
+
+ bcm2835_restart(wdt, partition);
return 0;
}
@@ -142,19 +163,9 @@ static void bcm2835_power_off(void)
of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt");
struct platform_device *pdev = of_find_device_by_node(np);
struct bcm2835_wdt *wdt = platform_get_drvdata(pdev);
- u32 val;
-
- /*
- * We set the watchdog hard reset bit here to distinguish this reset
- * from the normal (full) reset. bootcode.bin will not reboot after a
- * hard reset.
- */
- val = readl_relaxed(wdt->base + PM_RSTS);
- val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
- writel_relaxed(val, wdt->base + PM_RSTS);
- /* Continue with normal reset mechanism */
- bcm2835_restart(&wdt->restart_handler, REBOOT_HARD, NULL);
+ /* Partition 63 tells the firmware that this is a halt */
+ bcm2835_restart(wdt, 63);
}
static int bcm2835_wdt_probe(struct platform_device *pdev)
@@ -188,7 +199,7 @@ static int bcm2835_wdt_probe(struct plat
return err;
}
- wdt->restart_handler.notifier_call = bcm2835_restart;
+ wdt->restart_handler.notifier_call = bcm2835_restart_notifier_call;
wdt->restart_handler.priority = 128;
register_restart_handler(&wdt->restart_handler);
if (pm_power_off == NULL)