openwrtv3/package/network/config/ltq-vdsl-app/files/dsl_control
John Crispin 26e308019d ltq-vdsl-app: use VDSL tone-setup if annex is unset
I had to use a VDSL-only tone-setup to get show-time.
Handle this in uci by checking if annex is unset.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43114
2014-10-30 08:08:01 +00:00

197 lines
3.8 KiB
Bash

#!/bin/sh /etc/rc.common
# Copyright (C) 2012 OpenWrt.org
# needs to start before the atm layer which starts at 50
START=48
EXTRA_COMMANDS="status lucistat"
EXTRA_HELP=" status Get DSL status information
lucistat Get status information if lua friendly format"
SERVICE_DAEMONIZE=1
SERVICE_WRITE_PID=1
[ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
XDSL_CTRL=vdsl_cpe_control
# G.992.1 Annex A
# G.992.2 Annex A
# G.992.3 Annex A
# G.992.4 Annex A
# G.992.5 Annex A
# G.993.2 Annex A/B/C
xtse_adsl_a="04 01 04 01 00 01 00 00"
# G.992.1 Annex B
# G.992.3 Annex B
# G.992.5 Annex B
# G.993.2 Annex A/B/C
xtse_adsl_b="10 00 10 00 00 04 00 00"
# G.992.1 Annex B
# G.992.3 Annex B
# G.992.3 Annex J
# G.992.5 Annex B
# G.992.5 Annex J
# G.993.2 Annex A/B/C
xtse_adsl_j="10 00 10 40 00 04 01 00"
xtse_vdsl="00 00 00 00 00 00 00 07"
xdsl_scr() {
val=`echo $2 | sed "s/ / 0x/g"`
echo "[WaitForConfiguration]={
#G997XTUSEC_g997xtusecs 0x$val
}
[WaitForLinkActivate]={
}
[WaitForRestart]={
}
[Common]={
}" > /tmp/$1.scr
}
# A43
tone_adsl_a="0x142"
tone_vdsl_a="0x142"
# A43 + V43
tone_adsl_av="0x142"
tone_vdsl_av="0x146"
# B43
tone_adsl_b="0x1"
tone_vdsl_b="0x1"
# B43 + V43
tone_adsl_bv="0x1"
tone_vdsl_bv="0x5"
lowlevel_cfg() {
echo "# VRX Low Level Configuration File
#
# Parameters must be separated by tabs or spaces.
# Empty lines and comments will be ignored.
#
# nFilter
#
# NA = -1
# OFF = 0
# ISDN = 1
# POTS = 2
# POTS_2 = 3
# POTS_3 = 4
#
# (dec)
-1
# nHsToneGroupMode nHsToneGroup_A nHsToneGroup_V nHsToneGroup_AV
#
# NA = -1 NA = -1 see see
# AUTO = 0 VDSL2_B43 = 0x0001 nHsToneGroup_A nHsToneGroup_A
# MANUAL = 1 VDSL2_A43 = 0x0002
# VDSL2_V43 = 0x0004
# VDSL1_V43P = 0x0008
# VDSL1_V43I = 0x0010
# ADSL1_C43 = 0x0020
# ADSL2_J43 = 0x0040
# ADSL2_B43C = 0x0080
# ADSL2_A43C = 0x0100
#
# (dec) (hex) (hex) (hex)
1 $1 $2 0x0
# nBaseAddr nIrqNum
#
# (hex) (dec)
0x1e116000 63
# nUtopiaPhyAdr nUtopiaBusWidth nPosPhyParity
# default(16b) = 0 NA = -1
# 8-bit = 1 ODD = 0
# 16-bit = 2
#
#
# (hex) (dec) (dec)
0xFF 0 0
# bNtrEnable
#
# (dec)
0" > /tmp/lowlevel.cfg
}
start() {
local annex
local firmware
local tone
local tone_adsl
local tone_vdsl
local xtse
local xtse_adsl
local mode
config_load network
config_get tone dsl tone
config_get annex dsl annex
config_get firmware dsl firmware
config_get xfer_mode dsl xfer_mode
[ -z "${xfer_mode}" ] && xfer_mode=ptm
case "${xfer_mode}" in
atm)
insmod ltq_atm_vr9
mode=1
;;
*)
insmod ltq_ptm_vr9
mode=2
;;
esac
eval "xtse_adsl=\"\${xtse_adsl_$annex}\""
if [ "${xtse_adsl}" ]; then
xtse=$xtse_adsl
else
xtse_adsl=$xtse_adsl_a
xtse=$xtse_vdsl
fi
eval "tone_adsl=\"\${tone_adsl_$tone}\""
[ -z "${tone_adsl}" ] && tone_adsl=$tone_adsl_av
eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
[ -z "${tone_vdsl}" ] && tone_vdsl=$tone_vdsl_av
[ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
[ -f "${firmware}" ] || {
echo failed to find $firmware
return 1
}
xdsl_scr adsl "${xtse_adsl}"
xdsl_scr vdsl "${xtse_vdsl}"
lowlevel_cfg "${tone_adsl}" "${tone_vdsl}"
service_start /sbin/vdsl_cpe_control \
-i `echo $xtse | sed "s/ /_/g"` \
-n /sbin/dsl_notify.sh \
-f ${firmware} \
-a /tmp/adsl.scr \
-A /tmp/vdsl.scr \
-l /tmp/lowlevel.cfg \
-M ${mode}
}
stop() {
DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
DSL_INTERFACE_STATUS="DOWN" \
/sbin/dsl_notify.sh
service_stop /sbin/vdsl_cpe_control
}