openwrtv3/target/linux/ath79
Russell Senior 73127a878d ath79: add support for Ubiquiti AirRouter
Indoor low-power router with 2.4 GHz radio

CPU:    Atheros AR7241 rev 1
RAM:    32 MB
Flash:  8 MB NOR SPI
Switch: Atheros AR7240
Ports:  1x WAN, 4x LAN 10/100 Ethernet
WLAN:   Atheros AR9285 (2.4 GHz)
USB:    1x USB2 host port

Note: Ethernet WAN/LAN port naming is reversed from ar71xx.
WAN is eth0; LAN is eth1.1.

UART settings: 115200, 8N1

                LEDs
        +--------------------------
        |
        |
        |
        |
        |
        |
        |
        |
    VCC | x x
     RX | * x
        | x x
        | x x
     TX | * x
    GND | * x
        |
        |
        |
        |
        +--------------------------
                ETHERNET PORTS

Installation from Ubiquiti firmware, is as for other ubnt-xm AirOs devices.

Signed-off-by: Russell Senior <russell@personaltelco.net>
2018-12-03 07:58:56 +01:00
..
base-files ath79: add support for Ubiquiti AirRouter 2018-12-03 07:58:56 +01:00
dts ath79: add support for Ubiquiti AirRouter 2018-12-03 07:58:56 +01:00
files ath79: port cybertan_part from ar71xx 2018-09-10 09:07:11 +02:00
generic treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
image ath79: add support for Ubiquiti AirRouter 2018-12-03 07:58:56 +01:00
nand treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.79 2018-11-05 16:00:00 +01:00
tiny treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
config-4.14 ath79: add support for Buffalo WZR-HP-AG300H 2018-09-10 09:35:07 +02:00
Makefile ath79: Remove source-only flag 2018-11-26 12:24:54 +01:00
modules.mk