openwrtv3/target/linux/ramips/dts/F5D8235_V2.dts
Chuanhong Guo c9c4b2116c ramips: Use dts alias based status led
Also fix several typos in led node name.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-07-16 15:12:18 +02:00

125 lines
2.1 KiB
Text

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
model = "Belkin F5D8235 v2";
aliases {
led-status = &led_router;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "uboot";
reg = <0x0 0x50000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "nvram";
reg = <0x7e0000 0x10000>;
};
factory: partition@7f0000 {
label = "factory";
reg = <0x7f0000 0x10000>;
};
};
rtl8366rb {
compatible = "realtek,rtl8366rb";
gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};
gpio-leds {
compatible = "gpio-leds";
internet {
label = "f5d8235-v2:blue:internet";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "f5d8235-v2:amber:internet";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
modem {
label = "f5d8235-v2:blue:modem";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
modem2 {
label = "f5d8235-v2:amber:modem";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
led_router: router {
label = "f5d8235-v2:blue:router";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
storage {
label = "f5d8235-v2:blue:storage";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
storage2 {
label = "f5d8235-v2:amber:storage";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
security {
label = "f5d8235-v2:blue:security";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
security2 {
label = "f5d8235-v2:amber:security";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&uboot 0x40004>;
};
&esw {
mediatek,portmap = <0x3f>;
};
&wmac {
ralink,mtd-eeprom = <&uboot 0x40000>;
};
&otg {
status = "okay";
};