openwrtv3/target/linux/ramips/dts/MZK-EX750NP.dts
Mathias Kresin bcfbeae79f ramips: use rfkill for wps button on wlan only boards
All of the touched boards don't have an ethernet port. Allow to use the
wps button on these boards to enable the wireless radio after boot.

The force enabled wireless for the DCH-M225 is removed. It is reckless
to bring up an unencrypted wireless network by default these days.

Using the wps button to bring up the radio seam to me the better
approach.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-15 09:01:45 +02:00

148 lines
2.2 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-soc";
model = "Planex MZK-EX750NP";
gpio-leds {
compatible = "gpio-leds";
power {
label = "mzk-ex750np:red:power";
gpios = <&gpio0 14 1>;
};
wifi {
label = "mzk-ex750np:red:wifi";
gpios = <&gpio3 0 1>;
};
wps {
label = "mzk-ex750np:green:wps";
gpios = <&gpio0 10 1>;
};
rep {
label = "mzk-ex750np:blue:rep";
gpios = <&gpio2 16 1>;
};
wifi1 {
label = "mzk-ex750np:blue:wifi1";
gpios = <&gpio2 19 1>;
};
wifi2 {
label = "mzk-ex750np:blue:wifi2";
gpios = <&gpio2 18 1>;
};
wifi3 {
label = "mzk-ex750np:blue:wifi3";
gpios = <&gpio2 17 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 9 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 13 0>;
linux,code = <0xf7>;
};
};
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x730000>;
};
partition@780000 {
label = "Udata";
reg = <0x780000 0x80000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
ralink,function = "gpio";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};