openwrtv3/target/linux/ramips/dts/ZTE-Q7.dts
John Crispin 449c5f7b30 ramips: Add support for ZTE Q7
ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC.
I can,t find any information about this router on ZTE's website.
But I found this : http://en.cctairmobi.com/plus/list.php?tid=40
This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D

This patch adds support for it.
Because there is only one port,I disabled VLAN and use eth0 as lan port.
I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-(

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 45208
2015-04-01 08:31:46 +00:00

111 lines
1.7 KiB
Text

/dts-v1/;
/include/ "mt7620a.dtsi"
/ {
compatible = "ZTE-Q7", "ralink,mt7620a-soc";
model = "ZTE Q7";
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25q64";
reg = <0 0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
ralink,port-map = "wllll";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
sdhci@10130000 {
status = "okay";
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
statred {
label = "zte:red:status";
gpios = <&gpio0 13 1>;
};
statblue {
label = "zte:blue:status";
gpios = <&gpio0 9 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 2 1>;
linux,code = <0x198>;
};
};
};