openwrtv3/scripts
Sven Eckelmann 0b20490207 ipq40xx: add support for OpenMesh A62
* QCA IPQ4019
* 256 MB of RAM
* 32 MB of SPI NOR flash (s25fl256s1)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
* 2T2R 5 GHz (channel 36-64)
  - QCA9888 hw2.0 (PCI)
  - requires special BDF in QCA9888/hw2.0/board-2.bin
    bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
* 2T2R 5 GHz (channel 100-165)
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x button (reset; kmod-input-gpio-keys compatible)
* external watchdog
  - triggered GPIO
* 1x USB (xHCI)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio3:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + 802.3at POE+
  - phy@mdio4:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 18-24V passive POE (mode B)
* powered only via POE

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

The initramfs image can be started using

  setenv bootargs 'loglevel=8 earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(0:custom),64k(0:KEYS),15552k(inactive),15552k(inactive2)'
  tftpboot 0x84000000 openwrt-ipq40xx-openmesh_a62-initramfs-fit-uImage.itb
  set fdt_high 0x85000000
  bootm 0x84000000

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-04-23 22:07:22 +02:00
..
config build: cleanup leftover qconf files 2018-02-13 11:35:35 +01:00
flashing scripts: add EVA ramboot script 2018-03-18 22:22:38 +01:00
arm-magic.sh scripts/arm-magic.sh: make the generated kernels also include $IMG_PREFIX 2015-05-28 10:48:23 +00:00
brcmImage.pl merge: targets: update image generation and targets 2017-12-08 19:41:18 +01:00
bundle-libraries.sh build: bundle-libraries.sh: patch bundled ld.so 2018-02-02 13:59:34 +01:00
checkpatch.pl merge: base: update base-files and basic config 2017-12-08 19:41:18 +01:00
clang-gcc-wrapper build: fix build on Mac OS X 10.9 2013-10-28 15:15:09 +00:00
clean-package.sh build: clean up stale files from a previous build when installing a package build to the staging dir 2013-05-29 10:31:45 +00:00
cleanfile build: remove absolute path to perl and replace with /usr/bin/env perl 2017-05-02 14:33:58 +02:00
cleanpatch build: remove absolute path to perl and replace with /usr/bin/env perl 2017-05-02 14:33:58 +02:00
combined-ext-image.sh combined-ext-image.sh: generate image in temp dir 2018-01-13 07:58:46 +01:00
combined-image.sh scripts: make all scripts executable 2017-07-14 04:09:16 +02:00
config.guess update config.guess & config.sub 2015-11-02 18:12:45 +00:00
config.rpath add config.rpath and link it in autotools.mk if missing, some packages might need it, especially users of lib-link.m4 or iconv.m4 2011-02-27 15:39:27 +00:00
config.sub update config.guess & config.sub 2015-11-02 18:12:45 +00:00
deptest.sh scripts: avoid hard-coded paths in scripts 2016-04-28 16:43:28 +02:00
diffconfig.sh scripts/diffconfig.sh: fix output if TARGET_PER_DEVICE_ROOTFS is set 2016-10-06 22:00:10 +02:00
dl_cleanup.py dl_cleanup: Fix linux blacklist 2015-10-07 10:51:18 +00:00
download.pl base-files: allow skipping of hash verification 2017-12-14 09:29:31 +01:00
env env: allow passing a commit message on save 2015-05-01 17:23:15 +00:00
ext-toolchain.sh scripts: Probe external toolchains for libthread-db 2017-05-11 13:43:01 -07:00
feeds scripts/feeds: fix install of packages with different source/binary names 2018-01-14 17:07:58 +01:00
fixup-makefile.pl build: add FIXUP option for make check 2016-12-17 10:36:45 +01:00
gen-dependencies.sh gen-dependencies.sh: fix handling variations in "file" output 2017-02-19 16:56:18 +01:00
gen_image_generic.sh scripts/gen_image_generic.sh: drop NOGRUB variable 2017-07-14 04:09:16 +02:00
get_source_date_epoch.sh scripts: get_source_date_epoch.sh: fix mercurial support, add mtime fallback 2017-02-02 00:13:50 +01:00
getver.sh scripts/getver.sh: append short git hash based on upstream commit 2017-02-01 17:48:45 +01:00
ipkg-build scripts: ipkg-build: do not require git or svn 2016-08-15 13:33:32 +02:00
ipkg-make-index.sh build: use mkhash to replace various quirky md5sum/openssl calls 2017-01-05 11:09:12 +01:00
kconfig.pl treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07 08:58:42 +02:00
make-ipkg-dir.sh branding: add LEDE branding 2016-03-24 22:40:13 +01:00
md5sum improve support for building on mac os x by improving detection of missing components 2009-01-25 19:00:43 +00:00
metadata.pm scripts/metadata.pm: allow group-only Require-User specs 2018-02-26 07:19:46 +01:00
mkhash.c build: add a small standalone utility for calculating md5/sha256 hash 2017-01-05 11:09:12 +01:00
mkits.sh build: Allow to change the FIT config section name 2018-03-17 08:09:04 +01:00
om-fwupgradecfg-gen.sh ipq40xx: add support for OpenMesh A62 2018-04-23 22:07:22 +02:00
package-metadata.pl metadata: do not emit broken kconfig dependency statements 2018-01-14 19:00:06 +01:00
pad_image scripts: avoid hard-coded paths in scripts 2016-04-28 16:43:28 +02:00
patch-kernel.sh scripts/patch-kernel.sh: remove -E flag to preserve empty files touched by patches 2015-08-25 07:46:32 +00:00
patch-specs.sh patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that 2012-01-29 20:19:06 +00:00
portable_date.sh scripts: fix GNU data invocation 2016-02-01 10:43:27 +00:00
qemustart scripts/qemustart: more portable array operation 2018-01-31 16:54:57 +08:00
redboot-script.pl scripts: avoid hard-coded paths in scripts 2016-04-28 16:43:28 +02:00
relink-lib.sh base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs 2011-03-01 05:40:38 +00:00
remote-gdb build: remove libc version suffix from build/staging directories 2017-02-07 17:18:15 +01:00
rstrip.sh rstrip.sh: fix handling variations in "file" output 2017-02-19 16:56:17 +01:00
slugimage.pl use #!/usr/bin/env perl instead of #!/usr/bin/perl in openwrt scripts (fixes #2998) 2008-09-23 18:29:44 +00:00
srecimage.pl treewide: replace jow@openwrt.org with jo@mein.io 2016-06-07 11:42:52 +02:00
strip-kmod.sh scripts/strip-kmod.sh: remove a few extra sections to slightly reduce kernel module size 2016-02-01 13:33:33 +00:00
symlink-tree.sh docs: remove all refrences in Makefiles/scripts 2016-11-30 10:13:14 +01:00
sysupgrade-tar.sh build: rename sysupgrade-nand to sysupgrade-tar 2016-07-29 16:53:03 +02:00
target-metadata.pl scripts: only generate config from feature flag if fully match 2017-03-20 22:04:41 +01:00
timestamp.pl fix timestamp checks for build system paths which have '.svn' in their directory name 2010-04-14 22:21:15 +00:00
ubinize-image.sh scripts/ubinize-image.sh: add support for adding custom partitions 2016-08-31 13:05:19 +02:00