openwrtv3/package/kernel/mac80211/patches/330-v4.18-0005-brcmfmac-add-hostready-indication.patch
Rafał Miłecki c446e38c86 mac80211: backport brcmfmac changes from kernel 4.18
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-18 07:41:40 +02:00

74 lines
2.7 KiB
Diff

From 84ad327d18debe19b8d509059b61db445d048b02 Mon Sep 17 00:00:00 2001
From: Franky Lin <franky.lin@broadcom.com>
Date: Thu, 26 Apr 2018 12:16:50 +0200
Subject: [PATCH] brcmfmac: add hostready indication
A hostready signal is introduced to inform firmware through mailbox
doorbell1 when common ring initialized or D3 exited.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -105,7 +105,8 @@ static const struct brcmf_firmware_mappi
#define BRCMF_PCIE_PCIE2REG_MAILBOXMASK 0x4C
#define BRCMF_PCIE_PCIE2REG_CONFIGADDR 0x120
#define BRCMF_PCIE_PCIE2REG_CONFIGDATA 0x124
-#define BRCMF_PCIE_PCIE2REG_H2D_MAILBOX 0x140
+#define BRCMF_PCIE_PCIE2REG_H2D_MAILBOX_0 0x140
+#define BRCMF_PCIE_PCIE2REG_H2D_MAILBOX_1 0x144
#define BRCMF_PCIE2_INTA 0x01
#define BRCMF_PCIE2_INTB 0x02
@@ -140,6 +141,7 @@ static const struct brcmf_firmware_mappi
#define BRCMF_PCIE_SHARED_VERSION_MASK 0x00FF
#define BRCMF_PCIE_SHARED_DMA_INDEX 0x10000
#define BRCMF_PCIE_SHARED_DMA_2B_IDX 0x100000
+#define BRCMF_PCIE_SHARED_HOSTRDY_DB1 0x10000000
#define BRCMF_PCIE_FLAGS_HTOD_SPLIT 0x4000
#define BRCMF_PCIE_FLAGS_DTOH_SPLIT 0x8000
@@ -782,6 +784,12 @@ static void brcmf_pcie_intr_enable(struc
BRCMF_PCIE_MB_INT_FN0_1);
}
+static void brcmf_pcie_hostready(struct brcmf_pciedev_info *devinfo)
+{
+ if (devinfo->shared.flags & BRCMF_PCIE_SHARED_HOSTRDY_DB1)
+ brcmf_pcie_write_reg32(devinfo,
+ BRCMF_PCIE_PCIE2REG_H2D_MAILBOX_1, 1);
+}
static irqreturn_t brcmf_pcie_quick_check_isr(int irq, void *arg)
{
@@ -924,7 +932,7 @@ static int brcmf_pcie_ring_mb_ring_bell(
brcmf_dbg(PCIE, "RING !\n");
/* Any arbitrary value will do, lets use 1 */
- brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX, 1);
+ brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_H2D_MAILBOX_0, 1);
return 0;
}
@@ -1728,6 +1736,7 @@ static void brcmf_pcie_setup(struct devi
init_waitqueue_head(&devinfo->mbdata_resp_wait);
brcmf_pcie_intr_enable(devinfo);
+ brcmf_pcie_hostready(devinfo);
if (brcmf_attach(&devinfo->pdev->dev, devinfo->settings) == 0)
return;
@@ -1950,6 +1959,7 @@ static int brcmf_pcie_pm_leave_D3(struct
brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
brcmf_bus_change_state(bus, BRCMF_BUS_UP);
brcmf_pcie_intr_enable(devinfo);
+ brcmf_pcie_hostready(devinfo);
return 0;
}