openwrtv3/target/linux/ipq806x/patches-3.18/102-soc-qcom-gsbi-Add-support-for-ADM-CRCI-muxing.patch
John Crispin 21802f22f0 ipq806x: fix 3.18 support
accidentially removed the files in the v4.4 commit

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-27 22:28:15 +02:00

249 lines
6.8 KiB
Diff

--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -6,7 +6,8 @@ configuration settings. The mode settin
the 4 GSBI IOs.
Required properties:
-- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
+- compatible: Should contain "qcom,gsbi-v1.0.0"
+- cell-index: Should contain the GSBI index
- reg: Address range for GSBI registers
- clocks: required clock
- clock-names: must contain "iface" entry
@@ -16,6 +17,8 @@ Required properties:
Optional properties:
- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference
dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses
+ dma.
Required properties if child node exists:
- #address-cells: Must be 1
@@ -39,6 +42,7 @@ Example for APQ8064:
gsbi4@16300000 {
compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <4>;
reg = <0x16300000 0x100>;
clocks = <&gcc GSBI4_H_CLK>;
clock-names = "iface";
@@ -48,6 +52,8 @@ Example for APQ8064:
qcom,mode = <GSBI_PROT_I2C_UART>;
qcom,crci = <GSBI_CRCI_QUP>;
+ syscon-tcsr = <&tcsr>;
+
/* child nodes go under here */
i2c_qup4: i2c@16380000 {
@@ -76,3 +82,9 @@ Example for APQ8064:
};
};
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,apq8064-tcsr", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
+
+
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -4,6 +4,7 @@
config QCOM_GSBI
tristate "QCOM General Serial Bus Interface"
depends on ARCH_QCOM
+ select MFD_SYSCON
help
Say y here to enable GSBI support. The GSBI provides control
functions for connecting the underlying serial UART, SPI, and I2C
--- a/drivers/soc/qcom/qcom_gsbi.c
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -18,22 +18,129 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
#define GSBI_CTRL_REG 0x0000
#define GSBI_PROTOCOL_SHIFT 4
+#define MAX_GSBI 12
+
+#define TCSR_ADM_CRCI_BASE 0x70
+
+struct crci_config {
+ u32 num_rows;
+ const u32 (*array)[MAX_GSBI];
+};
+
+static const u32 crci_ipq8064[][MAX_GSBI] = {
+ {
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ {
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+};
+
+static const struct crci_config config_ipq8064 = {
+ .num_rows = ARRAY_SIZE(crci_ipq8064),
+ .array = crci_ipq8064,
+};
+
+static const unsigned int crci_apq8064[][MAX_GSBI] = {
+ {
+ 0x001800, 0x006000, 0x000030, 0x0000c0,
+ 0x000300, 0x000400, 0x000000, 0x000000,
+ 0x000000, 0x000000, 0x000000, 0x000000
+ },
+ {
+ 0x000000, 0x000000, 0x000000, 0x000000,
+ 0x000000, 0x000020, 0x0000c0, 0x000000,
+ 0x000000, 0x000000, 0x000000, 0x000000
+ },
+};
+
+static const struct crci_config config_apq8064 = {
+ .num_rows = ARRAY_SIZE(crci_apq8064),
+ .array = crci_apq8064,
+};
+
+static const unsigned int crci_msm8960[][MAX_GSBI] = {
+ {
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000400, 0x000000, 0x000000,
+ 0x000000, 0x000000, 0x000000, 0x000000
+ },
+ {
+ 0x000000, 0x000000, 0x000000, 0x000000,
+ 0x000000, 0x000020, 0x0000c0, 0x000300,
+ 0x001800, 0x006000, 0x000000, 0x000000
+ },
+};
+
+static const struct crci_config config_msm8960 = {
+ .num_rows = ARRAY_SIZE(crci_msm8960),
+ .array = crci_msm8960,
+};
+
+static const unsigned int crci_msm8660[][MAX_GSBI] = {
+ { /* ADM 0 - B */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ { /* ADM 0 - B */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ { /* ADM 1 - A */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+ { /* ADM 1 - B */
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
+ },
+};
+
+static const struct crci_config config_msm8660 = {
+ .num_rows = ARRAY_SIZE(crci_msm8660),
+ .array = crci_msm8660,
+};
struct gsbi_info {
struct clk *hclk;
u32 mode;
u32 crci;
+ struct regmap *tcsr;
+};
+
+static const struct of_device_id tcsr_dt_match[] = {
+ { .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064},
+ { .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064},
+ { .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960},
+ { .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660},
+ { },
};
static int gsbi_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
+ struct device_node *tcsr_node;
+ const struct of_device_id *match;
struct resource *res;
void __iomem *base;
struct gsbi_info *gsbi;
+ int i;
+ u32 mask, gsbi_num;
+ const struct crci_config *config = NULL;
gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL);
@@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_de
if (IS_ERR(base))
return PTR_ERR(base);
+ /* get the tcsr node and setup the config and regmap */
+ gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
+
+ if (!IS_ERR(gsbi->tcsr)) {
+ tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0);
+ if (tcsr_node) {
+ match = of_match_node(tcsr_dt_match, tcsr_node);
+ if (match)
+ config = match->data;
+ else
+ dev_warn(&pdev->dev, "no matching TCSR\n");
+
+ of_node_put(tcsr_node);
+ }
+ }
+
+ if (of_property_read_u32(node, "cell-index", &gsbi_num)) {
+ dev_err(&pdev->dev, "missing cell-index\n");
+ return -EINVAL;
+ }
+
+ if (gsbi_num < 1 || gsbi_num > MAX_GSBI) {
+ dev_err(&pdev->dev, "invalid cell-index\n");
+ return -EINVAL;
+ }
+
if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) {
dev_err(&pdev->dev, "missing mode configuration\n");
return -EINVAL;
@@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_de
writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci,
base + GSBI_CTRL_REG);
+ /*
+ * modify tcsr to reflect mode and ADM CRCI mux
+ * Each gsbi contains a pair of bits, one for RX and one for TX
+ * SPI mode requires both bits cleared, otherwise they are set
+ */
+ if (config) {
+ for (i = 0; i < config->num_rows; i++) {
+ mask = config->array[i][gsbi_num - 1];
+
+ if (gsbi->mode == GSBI_PROT_SPI)
+ regmap_update_bits(gsbi->tcsr,
+ TCSR_ADM_CRCI_BASE + 4 * i, mask, 0);
+ else
+ regmap_update_bits(gsbi->tcsr,
+ TCSR_ADM_CRCI_BASE + 4 * i, mask, mask);
+
+ }
+ }
+
/* make sure the gsbi control write is not reordered */
wmb();