openwrtv3/target/linux/brcm63xx/patches-3.3/527-board_dva-g3810bn-tl-1.patch
Jonas Gorski 746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup.
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
2012-11-24 14:19:16 +00:00

82 lines
1.4 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2513,6 +2513,71 @@ static struct board_info __initdata boar
},
}
};
+
+/* D-Link DVA-G3810BN/TL */
+static struct board_info __initdata board_DVAG3810BN = {
+ .name = "DVAG3810BN",
+ .expected_cpu_id = 0x6358,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 0,
+ .use_internal_phy = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_ehci0 = 1,
+
+ .leds = {
+ {
+ .name = "DVAG3810BN::voip",
+ .gpio = 1,
+ },
+ {
+ .name = "DVAG3810BN::dsl",
+ .gpio = 22,
+ .active_low = 1,
+ },
+ {
+ .name = "DVAG3810BN::internet",
+ .gpio = 23,
+ .active_low = 1,
+ },
+ {
+ .name = "DVAG3810BN::power",
+ .gpio = 4,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "DVAG3810BN::stop",
+ .gpio = 5,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 34,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -2708,6 +2773,7 @@ static const struct board_info __initdat
&board_ct6373_1,
&board_HW553,
&board_spw303v,
+ &board_DVAG3810BN,
#endif
#ifdef CONFIG_BCM63XX_CPU_6368