openwrtv3/target/linux/brcm63xx/patches-3.3/525-board_96348w3.patch
Jonas Gorski 746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup.
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
2012-11-24 14:19:16 +00:00

68 lines
1.2 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1335,6 +1335,57 @@ static struct board_info __initdata boar
},
};
+/* NetGear DG834G v4 */
+static struct board_info __initdata board_96348W3 = {
+ .name = "96348W3",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+
+ .leds = {
+ {
+ .name = "96348W3:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "96348W3:red:power",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "96348W3::adsl",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "96348W3::internet",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ },
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 6,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
#endif
/*
@@ -2527,6 +2578,7 @@ static const struct board_info __initdat
&board_ct536_ct5621,
&board_96348A_122,
&board_CPVA502plus,
+ &board_96348W3,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358