openwrtv3/target/linux/brcm2708/patches-4.4/0267-clk-bcm2835-Fix-PLL-poweron.patch
Álvaro Fernández Rojas 525b311bf8 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-24 13:03:39 +02:00

32 lines
1.3 KiB
Diff

From 66350cdbb13029d143f99c97b0953805afe2f175 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Wed, 13 Apr 2016 13:05:03 -0700
Subject: [PATCH 267/304] clk: bcm2835: Fix PLL poweron
In poweroff, we set the reset bit and the power down bit, but only
managed to unset the reset bit for poweron. This meant that if HDMI
did -EPROBE_DEFER after it had grabbed its clocks, we'd power down the
PLLH (that had been on at boot time) and never recover.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
(cherry picked from commit d794a7b18350b7538e64248adf639f2cb8da5fb7)
---
drivers/clk/bcm/clk-bcm2835.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -557,6 +557,10 @@ static int bcm2835_pll_on(struct clk_hw
const struct bcm2835_pll_data *data = pll->data;
ktime_t timeout;
+ cprman_write(cprman, data->a2w_ctrl_reg,
+ cprman_read(cprman, data->a2w_ctrl_reg) &
+ ~A2W_PLL_CTRL_PWRDN);
+
/* Take the PLL out of reset. */
cprman_write(cprman, data->cm_ctrl_reg,
cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);