openwrtv3/target/linux/brcm2708/patches-4.4/0123-BCM270X_DT-Add-the-sdtweak-overlay-for-tuning-sdhost.patch
Álvaro Fernández Rojas 3fc661a98c brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Also alphabetically order sound-soc kernel packages.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 21:23:21 +02:00

74 lines
2.5 KiB
Diff

From e1d87aa570e5a036160f35d7b95f6a2c10f96bed Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 4 Jan 2016 14:42:17 +0000
Subject: [PATCH 123/381] BCM270X_DT: Add the sdtweak overlay, for tuning
sdhost
The sdhost overlay declares the sdhost interface and allows parameters
to be set. This is overkill for situations where the user just wants to
tweak the parameters of a pre-declared sdhost interface, so create an
sdtweak overlay that does just that.
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 14 ++++++++++++++
arch/arm/boot/dts/overlays/sdtweak-overlay.dts | 21 +++++++++++++++++++++
3 files changed, 36 insertions(+)
create mode 100644 arch/arm/boot/dts/overlays/sdtweak-overlay.dts
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -53,6 +53,7 @@ dtb-$(RPI_DT_OVERLAYS) += rpi-proto-over
dtb-$(RPI_DT_OVERLAYS) += rpi-sense-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += sdhost-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += sdio-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += sdtweak-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-dev-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-nand-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += smi-overlay.dtb
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -635,6 +635,20 @@ Params: overclock_50 Clock (
(default on: polling once at boot-time)
+Name: sdtweak
+Info: Tunes the bcm2835-sdhost SD/MMC driver
+Load: dtoverlay=sdtweak,<param>=<val>
+Params: overclock_50 Clock (in MHz) to use when the MMC framework
+ requests 50MHz
+
+ force_pio Disable DMA support (default off)
+
+ pio_limit Number of blocks above which to use DMA
+ (default 1)
+
+ debug Enable debug output (default off)
+
+
Name: smi
Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25!
Load: dtoverlay=smi
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts
@@ -0,0 +1,21 @@
+/dts-v1/;
+/plugin/;
+
+/{
+ compatible = "brcm,bcm2708";
+
+ fragment@0 {
+ target = <&sdhost>;
+ frag1: __overlay__ {
+ brcm,overclock-50 = <0>;
+ brcm,pio-limit = <1>;
+ };
+ };
+
+ __overrides__ {
+ overclock_50 = <&frag1>,"brcm,overclock-50:0";
+ force_pio = <&frag1>,"brcm,force-pio?";
+ pio_limit = <&frag1>,"brcm,pio-limit:0";
+ debug = <&frag1>,"brcm,debug?";
+ };
+};