KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/lantiq/patches-4.9/0065-MIPS-lantiq-improve-USB-initialization.patch
Hauke Mehrtens 863e79f8d5 lantiq: add support for kernel 4.9 
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:44:13 +01:00

202 lines
7.1 KiB
Diff
Raw Blame History

From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 6 Jan 2017 17:40:12 +0100
Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
This adds code to initialize the USB controller and PHY also on Danube,
Amazon SE and AR10. This code is based on the Vendor driver from
different UGW versions and compared to the hardware documentation.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++----------
arch/mips/lantiq/xway/sysctrl.c | 20 +++++++
2 files changed, 110 insertions(+), 30 deletions(-)
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -72,6 +72,8 @@
#define RCU_USBCFG_HDSEL_BIT BIT(11)
#define RCU_USBCFG_HOST_END_BIT BIT(10)
#define RCU_USBCFG_SLV_END_BIT BIT(9)
+#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17)
+
/* USB reset bits */
#define RCU_USBRESET 0x0010
@@ -85,6 +87,8 @@
#define RCU_CFG1A 0x0038
#define RCU_CFG1B 0x003C
+#define RCU_CFG1_TX_PEE BIT(0)
+#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */
/* USB PMU devices */
#define PMU_AHBM BIT(15)
@@ -306,38 +310,91 @@ static void ltq_usb_init(void)
/* Power for USB cores 1 & 2 */
ltq_pmu_enable(PMU_AHBM);
ltq_pmu_enable(PMU_USB0);
- ltq_pmu_enable(PMU_USB1);
- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
+ if (of_machine_is_compatible("lantiq,ar10") ||
+ of_machine_is_compatible("lantiq,grx390") ||
+ of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9"))
+ ltq_pmu_enable(PMU_USB1);
+
+ if (of_machine_is_compatible("lantiq,vr9") ||
+ of_machine_is_compatible("lantiq,ar10")) {
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE |
+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE |
+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B);
+ }
/* Enable USB PHY power for cores 1 & 2 */
ltq_pmu_enable(PMU_USB0_P);
- ltq_pmu_enable(PMU_USB1_P);
+ if (of_machine_is_compatible("lantiq,ar10") ||
+ of_machine_is_compatible("lantiq,grx390") ||
+ of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9"))
+ ltq_pmu_enable(PMU_USB1_P);
+
+ if (of_machine_is_compatible("lantiq,ase") ||
+ of_machine_is_compatible("lantiq,danube")) {
+ /* Configure cores to host mode */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB1CFG);
+
+ /* Select DMA endianness (Host-endian: big-endian) */
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+ }
+
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ /* Configure cores to host mode */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB2CFG);
+
+ /* Select DMA endianness (Host-endian: big-endian) */
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
+ }
+
+ if (of_machine_is_compatible("lantiq,vr9") ||
+ of_machine_is_compatible("lantiq,ar10")) {
+ /* Configure cores to host mode */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
+ RCU_USB2CFG);
+
+ /* Select DMA endianness (Host-endian: big-endian) */
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
+ }
+
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ /* Hard reset USB state machines */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
+ | USBRESET_BIT | BIT(28), RCU_USBRESET);
+ udelay(50 * 1000);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
+ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET);
+ } else {
+ /* Hard reset USB state machines */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
+ udelay(50 * 1000);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
+ }
- /* Configure cores to host mode */
- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
- RCU_USB1CFG);
- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
- RCU_USB2CFG);
-
- /* Select DMA endianness (Host-endian: big-endian) */
- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
-
- /* Hard reset USB state machines */
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
- udelay(50 * 1000);
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
-
- /* Soft reset USB state machines */
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
- udelay(50 * 1000);
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
+ if (of_machine_is_compatible("lantiq,vr9")) {
+ /* Soft reset USB state machines */
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
+ udelay(50 * 1000);
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
+ }
}
static int __init mips_reboot_setup(void)
@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void
if (!ltq_rcu_membase)
panic("Failed to remap core memory");
- if (of_machine_is_compatible("lantiq,ar9") ||
- of_machine_is_compatible("lantiq,vr9"))
+ if (of_machine_is_compatible("lantiq,danube") ||
+ of_machine_is_compatible("lantiq,ase") ||
+ of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9") ||
+ of_machine_is_compatible("lantiq,ar10"))
ltq_usb_init();
if (of_machine_is_compatible("lantiq,vr9"))
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk)
pr_warn("deactivating PMU module failed!");
}
+static void usb_set_clock(void)
+{
+ unsigned int val = ltq_cgu_r32(ifccr);
+
+ if (of_machine_is_compatible("lantiq,ar10") ||
+ of_machine_is_compatible("lantiq,grx390")) {
+ val &= ~0x03; /* XTAL divided by 3 */
+ } else if (of_machine_is_compatible("lantiq,ar9") ||
+ of_machine_is_compatible("lantiq,vr9")) {
+ /* TODO: this depends on the XTAL frequency */
+ val |= 0x03; /* XTAL divided by 3 */
+ } else if (of_machine_is_compatible("lantiq,ase")) {
+ val |= 0x20; /* from XTAL */
+ } else if (of_machine_is_compatible("lantiq,danube")) {
+ val |= 0x30; /* 12 MHz, generated from 36 MHz */
+ }
+ ltq_cgu_w32(val, ifccr);
+}
+
/* the pci enable helper */
static int pci_enable(struct clk *clk)
{
@@ -608,4 +627,5 @@ void __init ltq_soc_init(void)
if (of_machine_is_compatible("lantiq,vr9"))
xbar_fpi_burst_disable();
+ usb_set_clock();
}
Reference in a new issue View git blame Copy permalink