openwrtv3/target/linux/lantiq/dts/vr9.dtsi
Hauke Mehrtens 863e79f8d5 lantiq: add support for kernel 4.9
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:44:13 +01:00

260 lines
5.3 KiB
Text

#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,vr9";
aliases {
serial0 = &asc1;
};
chosen {
stdout-path = "serial0:115200n8";
};
cpus {
cpu@0 {
compatible = "mips,mips34Kc";
};
};
memory@0 {
device_type = "memory";
};
cputemp@0 {
compatible = "lantiq,cputemp";
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x28
0x80228 0x28
0x80250 0x28
0x80278 0x28
0x802a0 0x28>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram", "simple-bus";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
interrupt-parent = <&icu0>;
lantiq,eiu-irqs = <166 135 66 40 41 42>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
};
dcdc@106a00 {
compatible = "lantiq,dcdc-xrx200";
reg = <0x106a00 0x200>;
};
vmmc@107000 {
status = "disabled";
compatible = "lantiq,vmmc-xway";
reg = <0x103000 0x400>;
interrupt-parent = <&icu0>;
interrupts = <150 151 152 153 154 155>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xrx200";
reg = <0x203000 0x1000>;
/* irq for thermal sensor */
interrupt-parent = <&icu0>;
interrupts = <115>;
};
xbar0: xbar@400000 {
compatible = "lantiq,xbar-xway";
reg = <0x400000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
};
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
interrupt-parent = <&icu0>;
interrupts = <126 127 128 129 130 131>;
};
asc0: serial@E100400 {
compatible = "lantiq,asc";
reg = <0xE100400 0x400>;
interrupt-parent = <&icu0>;
interrupts = <104 105 106>;
status = "disabled";
};
spi: spi@E100800 {
compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
reg = <0xE100800 0x100>;
interrupt-parent = <&icu0>;
interrupts = <22 23 24>;
interrupt-names = "spi_rx", "spi_tx", "spi_err",
"spi_frm";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
gpio: pinmux@E100B10 {
compatible = "lantiq,xrx200-pinctrl";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
};
asc1: serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
deu@E103100 {
compatible = "lantiq,deu-xrx200";
reg = <0xE103100 0xf00>;
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
ifxhcd@E101000 {
status = "disabled";
compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
reg = <0xE101000 0x1000
0xE120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
dr_mode = "host";
};
ifxhcd@E106000 {
status = "disabled";
compatible = "lantiq,xrx200-usb";
reg = <0xE106000 0x1000>;
interrupt-parent = <&icu0>;
interrupts = <91>;
dr_mode = "host";
};
eth0: eth@E108000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-net";
reg = < 0xE108000 0x3000 /* switch */
0xE10B100 0x70 /* mdio */
0xE10B1D8 0x30 /* mii */
0xE10B308 0x30 /* pmac */
>;
interrupt-parent = <&icu0>;
interrupts = <75 73 72>;
};
mei@E116000 {
compatible = "lantiq,mei-xrx200";
reg = <0xE116000 0x9c>;
interrupt-parent = <&icu0>;
interrupts = <63>;
};
ppe@E234000 {
compatible = "lantiq,ppe-xrx200";
interrupt-parent = <&icu0>;
interrupts = <96>;
};
pcie0: pcie@d900000 {
compatible = "lantiq,pcie-xrx200";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
interrupt-parent = <&icu0>;
interrupts = <161 144>;
device_type = "pci";
gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
};
pci0: pci@E105400 {
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xE105400 0x400>; /* pci bridge */
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
req-mask = <0x1>; /* GNT1 */
};
};
vdsl {
compatible = "lantiq,vdsl-vrx200";
};
};