openwrtv3/target/linux/lantiq/dts/EASY98021.dts
Mathias Kresin 26dc65b126 lantiq: remove the former board name from device tree model
Remove the former used board name from the device model property and
use the model name as it is.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:33:56 +01:00

81 lines
1.6 KiB
Text

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "falcon.dtsi"
#include "falcon-sflash-16M.dtsi"
/ {
model = "Lantiq Falcon HGU Reference Board";
compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
aliases {
spi0 = &ebu_cs0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>; // 64M at 0x0
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <0x198>;
};
};
gpio-mmc {
/* Place-holder for SIM-Card connector,
to list the used GPIOs, no official binding */
compatible = "gpio-mmc";
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 3 GPIO_ACTIVE_HIGH>,
<&gpio0 2 GPIO_ACTIVE_HIGH>,
<0>; /* no CS */
gpio-names = "di", "do", "clk", "cs";
reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
};
pinctrl {
led_pins: led-pins {
lantiq,pins = "io11", "io14", "io36", "io37", "io38";
lantiq,function = "gpio";
};
};
easy98021-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins &bootled_pins>;
GPON {
label = "easy98021:green:gpon";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
TEST {
label = "easy98021:red:test";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
ETH {
label = "easy98021:green:status";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
VOICE {
label = "easy98021:green:voice";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
SIMCARD {
label = "easy98021:green:simcard";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
};