openwrtv3/target/linux/ramips/dts/X5.dts
L. D. Pinney 70b192f573 ramips: update device tree source files
Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-08-03 19:37:40 +02:00

138 lines
2.1 KiB
Text

/dts-v1/;
#include "rt5350.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "poray,x5", "ralink,rt5350-soc";
model = "Poray X5";
gpio-leds {
compatible = "gpio-leds";
power {
label = "x5:green:power";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
20 {
label = "x5:green:20";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
50 {
label = "x5:green:50";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
80 {
label = "x5:green:80";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
bat {
label = "bat";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
mode {
label = "mode";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb-mode {
gpio-export,name = "usb-mode";
gpio-export,output = <0>;
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&esw {
mediatek,portmap = <0x2f>;
mediatek,led_polarity = <1>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};