openwrtv3/target/linux/lantiq/files-4.9/arch/mips/boot/dts/ACMP252.dts
Mathias Kresin f8a6987cd1 lantiq: make dts files and kernel config kernel version specific
Move the devicetree source files to a kernel specific directory in
preparation of adding kernel 4.14 support.

Rename the subtarget kernel config files to match a specific kernel
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-20 19:25:17 +01:00

102 lines
1.7 KiB
Text

/dts-v1/;
#include "danube.dtsi"
/ {
compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
model = "AudioCodes MediaPack MP-252";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x20000>;
};
partition@40000 {
label = "boardconfig";
reg = <0x40000 0x60000>;
read-only;
};
partition@a0000 {
label = "firmware";
reg = <0xa0000 0xf20000>;
};
partition@fc0000 {
label = "sysconfig";
reg = <0xfc0000 0x40000>;
};
partition@0x1000000 {
label = "rootfs_data";
reg = <0x1000000 0x1000000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "rmii";
};
pci@E105400 {
status = "okay";
};
};
};