openwrtv3/target/linux/lantiq/patches-4.9/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
Hauke Mehrtens 863e79f8d5 lantiq: add support for kernel 4.9
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:44:13 +01:00

219 lines
6.4 KiB
Diff

From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 10 Sep 2014 22:42:14 +0200
Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
arch/mips/lantiq/xway/Makefile | 3 +
arch/mips/lantiq/xway/ath5k_eep.c | 136 +++++++++++++++++++++
arch/mips/lantiq/xway/eth_mac.c | 25 ++++
drivers/net/ethernet/lantiq_etop.c | 6 +-
5 files changed, 172 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/lantiq/xway/ath5k_eep.c
create mode 100644 arch/mips/lantiq/xway/eth_mac.c
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev,
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
+/* allow the ethernet driver to load a flash mapped mac addr */
+const u8* ltq_get_eth_mac(void);
+
#endif /* CONFIG_SOC_TYPE_XWAY */
#endif /* _LTQ_XWAY_H__ */
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
obj-y += vmmc.o tffs.o
+obj-y += eth_mac.o
+obj-$(CONFIG_PCI) += ath5k_eep.o
+
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/ath5k_eep.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
+ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
+ * Copyright (C) 2015 Vittorio Gambaletta <openwrt@vittgam.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/etherdevice.h>
+#include <linux/ath5k_platform.h>
+#include <linux/pci.h>
+#include <linux/err.h>
+#include <linux/mtd/mtd.h>
+#include <lantiq_soc.h>
+
+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
+struct ath5k_platform_data ath5k_pdata;
+static u8 athxk_eeprom_mac[6];
+
+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
+{
+ dev->dev.platform_data = &ath5k_pdata;
+ return 0;
+}
+
+static int ath5k_eep_load;
+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node, *mtd_np = NULL;
+ int mac_offset;
+ u32 mac_inc = 0;
+ int i;
+ struct mtd_info *the_mtd;
+ size_t flash_readlen;
+ const __be32 *list;
+ const char *part;
+ phandle phandle;
+
+ list = of_get_property(np, "ath,eep-flash", &i);
+ if (!list || (i != (2 * sizeof(*list))))
+ return -ENODEV;
+
+ phandle = be32_to_cpup(list++);
+ if (phandle)
+ mtd_np = of_find_node_by_phandle(phandle);
+
+ if (!mtd_np)
+ return -ENODEV;
+
+ part = of_get_property(mtd_np, "label", NULL);
+ if (!part)
+ part = mtd_np->name;
+
+ the_mtd = get_mtd_device_nm(part);
+ if (IS_ERR(the_mtd))
+ return -ENODEV;
+
+ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1, GFP_KERNEL);
+
+ i = mtd_read(the_mtd, be32_to_cpup(list), ATH5K_PLAT_EEP_MAX_WORDS << 1,
+ &flash_readlen, (void *) ath5k_pdata.eeprom_data);
+
+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
+ size_t mac_readlen;
+ mtd_read(the_mtd, mac_offset, 6, &mac_readlen,
+ (void *) athxk_eeprom_mac);
+ }
+ put_mtd_device(the_mtd);
+
+ if (((ATH5K_PLAT_EEP_MAX_WORDS<<1) != flash_readlen) || i) {
+ dev_err(&pdev->dev, "failed to load eeprom from mtd\n");
+ return -ENODEV;
+ }
+
+ if (of_find_property(np, "ath,eep-swap", NULL))
+ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++)
+ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]);
+
+ if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac())
+ ether_addr_copy(athxk_eeprom_mac, ltq_get_eth_mac());
+
+ if (!is_valid_ether_addr(athxk_eeprom_mac)) {
+ dev_warn(&pdev->dev, "using random mac\n");
+ random_ether_addr(athxk_eeprom_mac);
+ }
+
+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
+ athxk_eeprom_mac[5] += mac_inc;
+
+ ath5k_pdata.macaddr = athxk_eeprom_mac;
+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
+
+ dev_info(&pdev->dev, "loaded ath5k eeprom\n");
+
+ return 0;
+}
+
+static struct of_device_id ath5k_eeprom_ids[] = {
+ { .compatible = "ath5k,eeprom" },
+ { }
+};
+
+static struct platform_driver ath5k_eeprom_driver = {
+ .driver = {
+ .name = "ath5k,eeprom",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ath5k_eeprom_ids),
+ },
+};
+
+static int __init of_ath5k_eeprom_init(void)
+{
+ int ret = platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
+
+ if (ret)
+ ath5k_eep_load = 1;
+
+ return ret;
+}
+
+static int __init of_ath5k_eeprom_init_late(void)
+{
+ if (!ath5k_eep_load)
+ return 0;
+
+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
+}
+late_initcall(of_ath5k_eeprom_init_late);
+subsys_initcall(of_ath5k_eeprom_init);
--- /dev/null
+++ b/arch/mips/lantiq/xway/eth_mac.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/if_ether.h>
+
+static u8 eth_mac[6];
+static int eth_mac_set;
+
+const u8* ltq_get_eth_mac(void)
+{
+ return eth_mac;
+}
+
+static int __init setup_ethaddr(char *str)
+{
+ eth_mac_set = mac_pton(str, eth_mac);
+ return !eth_mac_set;
+}
+early_param("ethaddr", setup_ethaddr);
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -797,7 +797,11 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+ memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN);
+
+ if (priv->mac && !is_valid_ether_addr(mac.sa_data))
+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+
if (!is_valid_ether_addr(mac.sa_data)) {
pr_warn("etop: invalid MAC, using random\n");
eth_random_addr(mac.sa_data);