KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/brcm47xx/image/Makefile
Rafał Miłecki 6c1852cb26 brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings 
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'

Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45178
2015-03-31 08:56:08 +00:00

330 lines
13 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
define Image/Prepare
# Optimized LZMA compression (with dictionary), handled by lzma-loader.
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
# Less optimal LZMA compression (no dictionary), handled by CFE.
$(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux > $(KDIR)/vmlinux-nodictionary.lzma
gzip -nc9 $(KDIR)/vmlinux > $(KDIR)/vmlinux.gz
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
cat $(KDIR)/vmlinux-initramfs | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux-initramfs.lzma
$(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs-nodictionary.lzma
endif
rm -f $(KDIR)/loader.gz
$(MAKE) -C lzma-loader \
BUILD_DIR="$(KDIR)" \
TARGET="$(KDIR)" \
clean install
echo -ne "\\x00" >> $(KDIR)/loader.gz
rm -f $(KDIR)/fs_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
endef
define Image/Build/wgt634u
dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(2).bin bs=131072 conv=sync
cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(2).bin
endef
define Image/Build/dwl3150
cp $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-dwl3150-$(2).bin
echo "BCM-5352-2050-0000000-01" >> $(BIN_DIR)/openwrt-dwl3150-$(2).bin
endef
# $(1): filesystem type.
# $(2): device model (used for output file).
# $(3): pattern (device specific magic).
# $(4): version.
# $(5): simplified filesystem type (without block size).
define Image/Build/CyberTAN
$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
endef
define Image/Build/CyberTAN2
$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5).noheader.bin -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
endef
define Image/Build/CyberTANHead
$(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6))
endef
define Image/Build/Motorola
$(STAGING_DIR_HOST)/bin/motorola-bin -$(3) $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin
endef
define Image/Build/USR
$(STAGING_DIR_HOST)/bin/trx2usr $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
endef
define Image/Build/Edi
$(STAGING_DIR_HOST)/bin/trx2edips $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
endef
define Image/Build/Huawei
dd if=/dev/zero of=$(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin bs=92 count=1
echo -ne 'HDR0\x08\x00\x00\x00' >> $(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin
cat $(BIN_DIR)/$(IMG_PREFIX)-$(1)-gz.trx >> $(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin
endef
# $(1): filesystem type.
# $(2): device model (used for output file).
# $(3): board_id (device specific magic).
# $(4): region.
# $(5): simplified filesystem type (without block size).
define Image/Build/Chk
$(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(2)-$(5).chk -k $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -b $(3) -r $(4)
endef
define trxalign/jffs2-128k
-a 0x20000 -f $(KDIR)/root.$(1)
endef
define trxalign/jffs2-64k
-a 0x10000 -f $(KDIR)/root.$(1)
endef
define trxalign/squashfs
-a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
endef
define Image/Build/trxV2
$(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
$(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5).noheader.bin \
-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
$(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin)
$(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
endef
#################################################
# Images
#################################################
define Build/trx-with-loader
$(STAGING_DIR_HOST)/bin/trx \
-o $@ \
-f $(KDIR)/loader.gz \
-f $(word 1,$^) \
$(call trxalign/$(lastword $(subst ., ,$(word 2,$^))),$(lastword $(subst ., ,$(word 2,$^))))
endef
define Build/linksys-bin
$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(DEVICE_ID) -v v$(VERSION) -i $@ -o $@.new
mv $@.new $@
endef
define Build/netgear-chk
$(STAGING_DIR_HOST)/bin/mkchkimg \
-o $@.new \
-k $@ \
-b $(BOARD_ID) \
-r $(REGION)
mv $@.new $@
endef
#################################################
# Devices
#################################################
DEVICE_VARS += DEVICE_ID VERSION
DEVICE_VARS += BOARD_ID REGION
define Device/Default
KERNEL := kernel-bin
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
KERNEL_NAME = vmlinux.lzma
FILESYSTEMS := $(FS_64K)
IMAGES := trx
IMAGE/trx := trx-with-loader
endef
define Device/linksys
IMAGES := bin
IMAGE/bin := trx-with-loader | linksys-bin
endef
define Device/netgear
IMAGES := chk
IMAGE/chk := trx-with-loader | netgear-chk
endef
#################################################
# Subtarget generic
#################################################
# $(1): filesystem type.
define Image/Build/generic/jffs2-64k
# BCM4705 with tg3
$(call Image/Build/CyberTAN,$(1),wrt300n_v11,EWC2,1.51.2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt310n_v1,310N,1.0.10,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt350n_v1,EWCG,1.04.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt610n_v1,610N,1.0.1,$(patsubst jffs2-%,jffs2,$(1)))
# BCMA SoC with SSB WiFi
$(call Image/Build/CyberTAN,$(1),wrt610n_v2,610N,2.0.0,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e3000_v1,61XN,1.0.3,$(patsubst jffs2-%,jffs2,$(1)))
endef
# $(1): filesystem type.
define Image/Build/generic/squashfs
$(call Image/Build/generic/jffs2-64k,$(1))
$(call Image/Build/generic/jffs2-128k,$(1))
endef
#################################################
# Subtarget legacy
#################################################
# $(1): filesystem type.
define Image/Build/legacy/devices-with-128k-blocks
$(call Image/Build/CyberTAN,$(1),wrt54gs,W54S,4.80.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrtsl54gs,W54U,2.08.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/trxV2,$(1),wrt54g3gv2-vf,3G2V,3.00.24,$(patsubst jffs2-%,jffs2,$(1)),6)
$(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1)))
endef
# $(1): filesystem type.
define Image/Build/legacy/devices-with-64k-blocks
$(call Image/Build/Chk,$(1),wgr614_v8,U12H072T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wndr3300_v1,U12H093T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr834b_v2,U12H081T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt54g3g,W54F,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt54g3g-em,W3GN,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.71.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt150n,N150,1.51.3,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt160n_v1,N150,1.50.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.03.6,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/dwl3150,$(1),$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Edi,$(1),ps1208mfg,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Huawei,$(1),e970,$(1))
$(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Motorola,$(1),wr850g,1,$(1))
$(call Image/Build/USR,$(1),usr5461,$(1))
endef
# $(1): filesystem type.
define Image/Build/legacy/jffs2-64k
$(call Image/Build/legacy/devices-with-64k-blocks,$(1))
endef
# $(1): filesystem type.
define Image/Build/legacy/jffs2-128k
$(call Image/Build/legacy/devices-with-128k-blocks,$(1))
endef
# $(1): filesystem type.
define Image/Build/legacy/squashfs
$(call Image/Build/legacy/devices-with-64k-blocks,$(1))
$(call Image/Build/legacy/devices-with-128k-blocks,$(1))
endef
#################################################
# Subtarget mips74k
#################################################
define Image/Build/mips74k/devices-with-64k-blocks
$(call Image/Build/Chk,$(1),wgr614_v10_north_america,U12H139T01_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wgr614_v10_other_regions,U12H139T01_NETGEAR,1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wndr3400_v1,U12H155T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wndr3400_v2,U12H187T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wndr3400_v3,U12H208T00_NETGEAR,1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wndr4000,U12H181T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr1000_v3,U12H139T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr2000v2,U12H114T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr3000rp,U12H163T01_NETGEAR,1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr3500l_v1_north_america,U12H136T99_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr3500l_v1_other_regions,U12H136T99_NETGEAR,1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr3500l_v2,U12H172T00_NETGEAR,1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr3500_v2,U12H127T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt160n_v3,N150,3.0.3,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt310n_v2,310N,2.0.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt320n_v1,320N,1.0.5,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e900_v1,E900,1.0.4,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e1000_v1_v2_v2.1,E100,1.1.3,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e1200_v1,E120,1.0.3,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e1500_v1,E150,1.0.5,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e1550_v1,1550,1.0.3,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e2000_v1,32XN,1.0.4,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e2500_v1,E25X,1.0.7,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e2500_v2,E25X,2.0.0,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e2500_v2.1,25RU,2.1.0,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e2500_v3,25V3,3.0.0,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e3200_v1,3200,1.0.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),e4200_v1,4200,1.0.5,$(patsubst jffs2-%,jffs2,$(1)))
endef
# $(1): filesystem type.
define Image/Build/mips74k/jffs2-64k
$(call Image/Build/mips74k/devices-with-64k-blocks,$(1))
endef
# $(1): filesystem type.
define Image/Build/mips74k/jffs2-128k
$(call Image/Build/mips74k/devices-with-128k-blocks,$(1))
endef
# $(1): filesystem type.
define Image/Build/mips74k/squashfs
$(call Image/Build/mips74k/devices-with-64k-blocks,$(1))
$(call Image/Build/mips74k/devices-with-128k-blocks,$(1))
endef
define Device/linksys-e1200-v2
$(Device/linksys)
DEVICE_ID := E122
VERSION := 1.0.4
endef
define Device/netgear-wndr3700-v3
$(Device/netgear)
BOARD_ID := U12H194T00_NETGEAR
REGION := 2
endef
ifeq ($(SUBTARGET),mips74k)
TARGET_DEVICES += \
linksys-e1200-v2 \
netgear-wndr3700-v3
endif
#################################################
# Shared BuildImage defines
#################################################
define Image/Build/Initramfs
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux-initramfs.lzma
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs-noloader-nodictionary.trx -f $(KDIR)/vmlinux-initramfs-nodictionary.lzma
endef
# $(1): filesystem type.
define Image/Build
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \
-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
$(call trxalign/$(1),$(1))
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1)-noloader-nodictionary.trx \
-f $(KDIR)/vmlinux-nodictionary.lzma \
$(call trxalign/$(1),$(1))
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1)-gz.trx \
-f $(KDIR)/vmlinux.gz \
$(call trxalign/$(1),$(1))
$(call Image/Build/$(SUBTARGET)/$(1),$(1))
# $(call Image/Build/Chk,$(1),wgr614_v9,U12H094T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wndr3400_vcna,U12H155T01_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wnr3500U,U12H136T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wnr3500v2_VC,U12H127T70_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
$(call Image/Build/Initramfs)
endif
endef
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink