openwrtv3/target/linux/brcm-2.4/patches/014-bcm5354.patch
Florian Fainelli dc36fccfdc Add bcm5354 patch from #2754
SVN-Revision: 9684
2007-12-09 15:51:45 +00:00

155 lines
5.1 KiB
Diff

--- a/arch/mips/bcm947xx/include/sbchipc.h 2007-11-23 12:12:01.000000000 -0500
+++ b/arch/mips/bcm947xx/include/sbchipc.h 2007-11-25 06:16:42.000000000 -0500
@@ -188,6 +188,7 @@
#define CAP_JTAGP 0x00400000 /* JTAG Master Present */
#define CAP_ROM 0x00800000 /* Internal boot rom active */
#define CAP_BKPLN64 0x08000000 /* 64-bit backplane */
+#define CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
/* PLL type */
#define PLL_NONE 0x00000000
@@ -199,6 +200,9 @@
#define PLL_TYPE6 0x00028000 /* 100/200 or 120/240 only */
#define PLL_TYPE7 0x00038000 /* 25Mhz, 4 dividers */
+/* watchdog clock */
+#define WATCHDOG_CLOCK_5354 32000 /* Hz */
+
/* corecontrol */
#define CC_UARTCLKO 0x00000001 /* Drive UART with internal clock */
#define CC_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
--- a/arch/mips/bcm947xx/include/bcmdevs.h 2007-11-23 12:12:01.000000000 -0500
+++ b/arch/mips/bcm947xx/include/bcmdevs.h 2007-11-25 05:58:20.000000000 -0500
@@ -121,6 +121,7 @@
#define BCM5365_CHIP_ID 0x5365 /* 5365 chipcommon chipid */
#define BCM5350_CHIP_ID 0x5350 /* bcm5350 chipcommon chipid */
#define BCM5352_CHIP_ID 0x5352 /* bcm5352 chipcommon chipid */
+#define BCM5354_CHIP_ID 0x5354 /* bcm5354 chipcommon chipid */
#define BCM4320_CHIP_ID 0x4320 /* bcm4320 chipcommon chipid */
--- a/arch/mips/bcm947xx/sbmips.c 2007-11-23 12:12:02.000000000 -0500
+++ b/arch/mips/bcm947xx/sbmips.c 2007-11-25 05:40:40.000000000 -0500
@@ -290,6 +290,12 @@
n = R_REG(osh, &eir->clockcontrol_n);
m = R_REG(osh, &eir->clockcontrol_sb);
} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ if (sb_chip(sbh) == BCM5354_CHIP_ID) {
+ rate = 240000000;
+ goto out;
+ }
+
pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
n = R_REG(osh, &cc->clockcontrol_n);
if ((pll_type == PLL_TYPE2) ||
@@ -612,6 +618,15 @@
clockcontrol_pci = &eir->clockcontrol_pci;
clockcontrol_m2 = &cc->clockcontrol_m2;
} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
+
+ /* 5354 chipcommon pll setting can't be changed.
+ * The PMU on power up comes up with the default clk frequency
+ * of 240MHz
+ */
+ if (sb_chip(sbh) == BCM5354_CHIP_ID) {
+ ret = TRUE;
+ goto done;
+ }
pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
if (pll_type == PLL_TYPE6) {
clockcontrol_n = NULL;
--- a/arch/mips/bcm947xx/sbutils.c 2007-11-23 12:12:02.000000000 -0500
+++ b/arch/mips/bcm947xx/sbutils.c 2007-11-25 06:22:43.000000000 -0500
@@ -791,8 +791,14 @@
/* readback */
if (regoff >= SBCONFIGOFF)
w = R_SBREG(si, r);
- else
+ else {
+ if ((si->sb.chip == BCM5354_CHIP_ID) &&
+ (coreidx == SB_CC_IDX) &&
+ (regoff == OFFSETOF(chipcregs_t, watchdog))) {
+ w = val;
+ } else
w = R_REG(si->osh, r);
+ }
if (!fast) {
/* restore core index */
@@ -1902,6 +1908,15 @@
n = R_REG(si->osh, &eir->clockcontrol_n);
m = R_REG(si->osh, &eir->clockcontrol_sb);
} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
+
+ if (R_REG(si->osh, &cc->capabilities) & CAP_PMU) {
+ if (sb_chip(sbh) == BCM5354_CHIP_ID) {
+ /* 5354 has a constant sb clock of 120MHz */
+ rate = 120000000;
+ goto end;
+ } else
+ ASSERT(0);
+ }
pll_type = R_REG(si->osh, &cc->capabilities) & CAP_PLL_MASK;
if (pll_type == PLL_NONE) {
INTR_RESTORE(si, intr_val);
@@ -1929,6 +1944,7 @@
rate = rate / 2;
}
+end:
/* switch back to previous core */
sb_setcoreidx(sbh, idx);
--- a/arch/mips/bcm947xx/hndchipc.c 2007-11-23 12:12:02.000000000 -0500
+++ b/arch/mips/bcm947xx/hndchipc.c 2007-11-25 06:31:15.000000000 -0500
@@ -93,6 +93,9 @@
chipcregs_t *cc = (chipcregs_t *) regs;
uint32 rev, cap, pll, baud_base, div;
+ /* Default value */
+ div = 48;
+
/* Determine core revision and capabilities */
rev = sb_corerev(sbh);
cap = R_REG(osh, &cc->capabilities);
@@ -108,22 +111,29 @@
R_REG(osh, &cc->clockcontrol_m2));
div = 1;
} else {
- /* Fixed ALP clock */
- if (rev >= 11 && rev != 15) {
- baud_base = 20000000;
+/* 5354 chip common uart uses a constant clock
+ * frequency of 25MHz */
+ if (sb_corerev(sbh) == 20) {
+ /* Set the override bit so we don't divide it */
+ W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
+ baud_base = 25000000;
+ } else if (rev >= 11 && rev != 15) {
+ /* Fixed ALP clock */
+// baud_base = sb_alp_clock(sbh);
+ baud_base = 20000000;
div = 1;
/* Set the override bit so we don't divide it */
W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
- }
+
/* Internal backplane clock */
- else if (rev >= 3) {
- baud_base = sb_clock(sbh);
- div = 2; /* Minimum divisor */
- W_REG(osh, &cc->clkdiv,
+ } else if (rev >= 3) {
+ baud_base = sb_clock(sbh);
+ div = 2; /* Minimum divisor */
+ W_REG(osh, &cc->clkdiv,
((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div));
- }
+
/* Fixed internal backplane clock */
- else {
+ } else {
baud_base = 88000000;
div = 48;
}