6ae5ec16e0
This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 33344
97 lines
2.4 KiB
C
97 lines
2.4 KiB
C
/*
|
|
* MikroTik RouterBOARD 2011 support
|
|
*
|
|
* Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
|
|
static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
};
|
|
|
|
static struct ar8327_platform_data rb2011_ar8327_data = {
|
|
.pad0_cfg = &rb2011_ar8327_pad0_cfg,
|
|
.cpuport_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
}
|
|
};
|
|
|
|
static struct mdio_board_info rb2011_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &rb2011_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init rb2011_gmac_setup(void)
|
|
{
|
|
void __iomem *base;
|
|
u32 t;
|
|
|
|
base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
|
|
|
|
t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
|
|
t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
|
|
AR934X_ETH_CFG_GMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
t |= AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE;
|
|
|
|
__raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
|
|
|
|
iounmap(base);
|
|
}
|
|
|
|
static void __init rb2011_setup(void)
|
|
{
|
|
ath79_register_m25p80(NULL);
|
|
|
|
rb2011_gmac_setup();
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
mdiobus_register_board_info(rb2011_mdio0_info,
|
|
ARRAY_SIZE(rb2011_mdio0_info));
|
|
|
|
/* GMAC0 is connected to an ar8327 switch */
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the internal switch */
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5);
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
|
|
ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_RB_2011L, "2011L", "MikroTik RouterBOARD 2011L",
|
|
rb2011_setup);
|