abbfcc8525
This patch adds supports for the GL-inet GL-MT300N-V2. Specification: - SoC: MediaTek MT7628AN - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR - Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps) - USB: 1 x USB 2.0 port - Button: 1 x switch button, 1 x reset button - LED: 3 x LEDS (system power led is not GPIO controller) - UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND) Installation through Luci: - The original firmware is LEDE, so both LuCI or sysupgrade can be used. - Do not keep settings, for sysupgrade please use the -n option. Installation through bootloader webserver: - Plug power and hold reset button until red LED blink to bright. - Install sysupgrade image using web interface on 192.168.1.1. Signed-off-by: Kyson Lok <kysonlok@gmail.com> [match maximum image size with firmware partition] Signed-off-by: Mathias Kresin <dev@kresin.me>
88 lines
2.2 KiB
Makefile
88 lines
2.2 KiB
Makefile
#
|
|
# MT7628 Profiles
|
|
#
|
|
|
|
define Device/mt7628
|
|
DTS := MT7628
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := $(ralink_default_fw_size_4M)
|
|
DEVICE_TITLE := MediaTek MT7628 EVB
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += mt7628
|
|
|
|
define Device/hc5661a
|
|
DTS := HC5661A
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := HiWiFi HC5661A
|
|
endef
|
|
TARGET_DEVICES += hc5661a
|
|
|
|
define Device/miwifi-nano
|
|
DTS := MIWIFI-NANO
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := Xiaomi MiWiFi Nano
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += miwifi-nano
|
|
|
|
define Device/gl-mt300n-v2
|
|
DTS := GL-MT300N-V2
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_TITLE := GL-iNet GL-MT300N-V2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += gl-mt300n-v2
|
|
|
|
define Device/vocore2
|
|
DTS := VOCORE2
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := VoCore VoCore2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
|
|
kmod-sdhci-mt7620
|
|
endef
|
|
TARGET_DEVICES += vocore2
|
|
|
|
define Device/wl-wn575a3
|
|
DTS := WL-WN575A3
|
|
IMAGE_SIZE := $(ralink_default_fw_size_8M)
|
|
DEVICE_TITLE := Wavlink WL-WN575A3
|
|
endef
|
|
TARGET_DEVICES += wl-wn575a3
|
|
|
|
define Device/wrtnode2p
|
|
DTS := WRTNODE2P
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := WRTnode 2P
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += wrtnode2p
|
|
|
|
define Device/duzun-dm06
|
|
DTS := DUZUN-DM06
|
|
DEVICE_TITLE := DuZun DM06
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += duzun-dm06
|
|
|
|
define Device/mac1200r-v2
|
|
DTS := MAC1200RV2
|
|
DEVICE_TITLE := Mercury MAC1200R v2.0
|
|
endef
|
|
TARGET_DEVICES += mac1200r-v2
|
|
|
|
define Device/wcr-1166ds
|
|
DTS := WCR-1166DS
|
|
BUFFALO_TAG_PLATFORM := MTK
|
|
BUFFALO_TAG_VERSION := 9.99
|
|
BUFFALO_TAG_MINOR := 9.99
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
|
IMAGE/factory.bin := \
|
|
trx -M 0x746f435c | pad-rootfs | append-metadata | \
|
|
buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
|
|
buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | \
|
|
buffalo-dhp-image
|
|
DEVICE_TITLE := Buffalo WCR-1166DS
|
|
endef
|
|
TARGET_DEVICES += wcr-1166ds
|