Mathias Kresin 23e3314cad lantiq: fix thermal sensors driver ... Read the temperature including the decimale place from the CGU_GPHY1_CR register. Decrement the temperature read from the register by 38.0 degree celsius. The temperature range of the sensor is -38.0 to +154 °C and the register value 0 is equal to -38.0 °C. This fixes the report of unrealistic temperatures as seen on all tested boards. Give the SoC a few milliseconds to get the first temperature value. On some rare occasions there is no temperature value in the register when read the first time after activation. This leads to a reported temperature of -38.0 °C on boot. Only version 1.2 of the vr9 SoC has a temperature sensor. Add a check to make sure the driver doesn't load on v1.1 vr9 SoCs. Signed-off-by: Mathias Kresin <dev@kresin.me>		2016-10-19 19:55:06 +02:00
..
0001-MIPS-lantiq-add-pcie-driver.patch	kernel: update kernel 4.4 to version 4.4.8	2016-04-24 11:32:17 +02:00
0004-MIPS-lantiq-add-atm-hack.patch	kernel: remove full cache flush in fuse_copy_do() for MIPS	2016-06-26 18:22:23 +02:00
0007-MIPS-lantiq-add-basic-tffs-driver.patch
0008-MIPS-lantiq-backport-old-timer-code.patch
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0018-MTD-nand-lots-of-xrx200-fixes.patch	lantiq: fix wrong parameter order in xway_nand driver	2016-02-08 08:25:15 +00:00
0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch	kernel: update kernel 4.4 to version 4.4.9	2016-05-10 10:43:17 +02:00
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch	lantiq: disable phy led complex (test) functions by default	2016-05-23 11:03:23 +02:00
0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch
0025-NET-MIPS-lantiq-adds-xrx200-net.patch	lantiq/xrx200-net: Add support for eth0 as WAN interface	2016-08-15 21:52:04 +02:00
0026-NET-multi-phy-support.patch	kernel: update to v4.4.23	2016-09-30 20:08:21 +02:00
0028-NET-lantiq-various-etop-fixes.patch	kernel: update to version 4.4.14	2016-06-26 18:20:37 +02:00
0030-GPIO-add-named-gpio-exports.patch	lantiq: refresh patches	2016-06-15 14:36:47 +02:00
0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch	ntiq: make i2c-lantiqi driver compile again	2016-10-03 00:13:11 +02:00
0032-USB-fix-roothub-for-IFXHCD.patch	kernel: update kernel 4.4 to version 4.4.20	2016-09-15 08:10:55 +02:00
0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch	lantiq: fix ath5k EEPROM loading	2016-08-24 19:30:52 +02:00
0040-USB-DWC2-enable-usb-power-gpio.patch
0041-USB-DWC2-add-ltq-params.patch
0042-arch-mips-increase-io_space_limit.patch	lantiq: refresh patches	2016-06-15 14:36:47 +02:00
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch	kernel: update kernel 4.4 to version 4.4.3	2016-02-25 21:54:39 +00:00
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch	lantiq: refresh patches	2016-06-15 14:36:47 +02:00
0047-poweroff.patch	lantiq: remove dummy ltq_machine_power_off to fix gpio-poweroff drivers	2016-06-11 09:49:13 +02:00
0100-spi-add-support-for-Lantiq-SPI-controller.patch	Revert "kernel: remove long obsolete gpio spi controller driver patch"	2016-08-04 23:10:15 +02:00
0101-find_active_root.patch	lantiq: handle the dual-firmware layout of brnboot	2016-05-10 10:43:12 +02:00
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch	lantiq: use upstream mechanism to append device tree file	2016-03-20 14:41:54 +00:00
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch	lantiq: use upstream mechanism to append device tree file	2016-03-20 14:41:54 +00:00
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch	kernel: Backport pending appended DTB handling patches	2016-09-12 22:36:55 +02:00
0151-lantiq-ifxmips_pcie-use-of.patch
0160-owrt-lantiq-multiple-flash.patch	kernel: update to version 4.4.14	2016-06-26 18:20:37 +02:00
0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch
0301-xrx200-add-gphy-clk-src-device-tree-binding.patch	lantiq: add device tree binding for the phy clock source	2016-05-10 10:43:12 +02:00
0302-xrx200-add-sensors-driver.patch	lantiq: fix thermal sensors driver	2016-10-19 19:55:06 +02:00