openwrtv3/target/linux/brcm63xx/patches-3.3/531-board_96328A-1441N1.patch
Jonas Gorski 60e0e0d6e6 bcm63xx: Add a fixup for rt2x00 devices.
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34322
2012-11-24 14:19:22 +00:00

89 lines
1.7 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -137,6 +137,78 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_96328A_1441N1 = {
+ .name = "96328A-1441N1",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "96328A-1441N1:green:power",
+ .gpio = 8,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "96328A-1441N1:red:power",
+ .gpio = 4,
+ },
+ {
+ .name = "96328A-1441N1:green:inet",
+ .gpio = 7,
+ },
+ {
+ .name = "96328A-1441N1:red:inet",
+ .gpio = 1,
+ },
+ {
+ .name = "96328A-1441N1:green:dsl",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 23,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
static struct board_info __initdata board_963281TAN = {
.name = "963281TAN",
.expected_cpu_id = 0x6328,
@@ -2994,6 +3066,7 @@ static struct board_info __initdata boar
static const struct board_info __initdata *bcm963xx_boards[] = {
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
+ &board_96328A_1441N1,
&board_963281TAN,
&board_963281T_TEF,
&board_dsl_274xb_f1,