18839 lines
490 KiB
Diff
18839 lines
490 KiB
Diff
Documentation/kernel-parameters.txt | 5 +
|
|
MAINTAINERS | 6 +
|
|
Makefile | 2 +-
|
|
arch/arm/mach-at91/at91sam9261_devices.c | 14 +
|
|
arch/arm/mach-at91/at91sam9rl_devices.c | 14 +
|
|
arch/arm/mach-at91/board-sam9261ek.c | 1 +
|
|
arch/arm/mach-at91/board-sam9263ek.c | 1 +
|
|
arch/avr32/Kconfig | 54 +-
|
|
arch/avr32/Kconfig.debug | 10 -
|
|
arch/avr32/Makefile | 4 +-
|
|
arch/avr32/boards/atngw100/Kconfig | 12 +
|
|
arch/avr32/boards/atngw100/setup.c | 14 +-
|
|
arch/avr32/boards/atstk1000/Kconfig | 101 ++-
|
|
arch/avr32/boards/atstk1000/Makefile | 2 +
|
|
arch/avr32/boards/atstk1000/atstk1000.h | 2 +
|
|
arch/avr32/boards/atstk1000/atstk1002.c | 129 +--
|
|
arch/avr32/boards/atstk1000/atstk1003.c | 181 +++
|
|
arch/avr32/boards/atstk1000/atstk1004.c | 152 +++
|
|
arch/avr32/boards/atstk1000/setup.c | 64 +
|
|
arch/avr32/configs/atngw100_defconfig | 423 +++++---
|
|
arch/avr32/configs/atstk1002_defconfig | 661 ++++++++---
|
|
arch/avr32/configs/atstk1003_defconfig | 1032 ++++++++++++++++
|
|
arch/avr32/configs/atstk1004_defconfig | 627 ++++++++++
|
|
arch/avr32/drivers/Makefile | 1 +
|
|
arch/avr32/drivers/dw-dmac.c | 761 ++++++++++++
|
|
arch/avr32/drivers/dw-dmac.h | 42 +
|
|
arch/avr32/kernel/Makefile | 4 +-
|
|
arch/avr32/kernel/cpu.c | 96 ++-
|
|
arch/avr32/kernel/dma-controller.c | 34 +
|
|
arch/avr32/kernel/irq.c | 11 +
|
|
arch/avr32/kernel/kprobes.c | 5 +-
|
|
arch/avr32/kernel/nmi_debug.c | 82 ++
|
|
arch/avr32/kernel/ocd.c | 163 +++
|
|
arch/avr32/kernel/process.c | 5 +-
|
|
arch/avr32/kernel/ptrace.c | 5 +-
|
|
arch/avr32/kernel/setup.c | 2 +
|
|
arch/avr32/kernel/signal.c | 7 -
|
|
arch/avr32/kernel/traps.c | 21 +-
|
|
arch/avr32/mach-at32ap/Kconfig | 19 +-
|
|
arch/avr32/mach-at32ap/Makefile | 5 +-
|
|
arch/avr32/mach-at32ap/at32ap7000.c | 1730 --------------------------
|
|
arch/avr32/mach-at32ap/at32ap700x.c | 1809 ++++++++++++++++++++++++++++
|
|
arch/avr32/mach-at32ap/extint.c | 59 +-
|
|
arch/avr32/mach-at32ap/gpio-dev.c | 573 +++++++++
|
|
arch/avr32/mach-at32ap/pio.c | 76 ++
|
|
arch/avr32/mm/dma-coherent.c | 7 +
|
|
arch/avr32/mm/tlb.c | 2 +-
|
|
arch/avr32/oprofile/Makefile | 8 +
|
|
arch/avr32/oprofile/op_model_avr32.c | 235 ++++
|
|
drivers/i2c/busses/Kconfig | 8 +
|
|
drivers/i2c/busses/Makefile | 1 +
|
|
drivers/i2c/busses/i2c-atmeltwi.c | 436 +++++++
|
|
drivers/i2c/busses/i2c-atmeltwi.h | 117 ++
|
|
drivers/leds/Kconfig | 7 +
|
|
drivers/leds/Makefile | 1 +
|
|
drivers/leds/leds-atmel-pwm.c | 155 +++
|
|
drivers/misc/Kconfig | 9 +
|
|
drivers/misc/Makefile | 1 +
|
|
drivers/misc/atmel_pwm.c | 409 +++++++
|
|
drivers/mmc/host/Kconfig | 10 +
|
|
drivers/mmc/host/Makefile | 1 +
|
|
drivers/mmc/host/atmel-mci.c | 1176 ++++++++++++++++++
|
|
drivers/mmc/host/atmel-mci.h | 192 +++
|
|
drivers/mtd/chips/cfi_cmdset_0001.c | 43 +
|
|
drivers/mtd/chips/cfi_cmdset_0002.c | 6 +-
|
|
drivers/pcmcia/Kconfig | 7 +
|
|
drivers/pcmcia/Makefile | 1 +
|
|
drivers/pcmcia/at32_cf.c | 533 ++++++++
|
|
drivers/serial/Kconfig | 15 +
|
|
drivers/serial/atmel_serial.c | 884 +++++++++++---
|
|
drivers/spi/atmel_spi.c | 173 ++-
|
|
drivers/video/atmel_lcdfb.c | 149 +++-
|
|
drivers/video/backlight/Kconfig | 13 +
|
|
drivers/video/console/Kconfig | 2 +-
|
|
drivers/watchdog/Kconfig | 2 +-
|
|
include/asm-avr32/arch-at32ap/at32ap7000.h | 35 -
|
|
include/asm-avr32/arch-at32ap/at32ap700x.h | 35 +
|
|
include/asm-avr32/arch-at32ap/board.h | 11 +-
|
|
include/asm-avr32/arch-at32ap/cpu.h | 2 +-
|
|
include/asm-avr32/arch-at32ap/io.h | 4 +-
|
|
include/asm-avr32/arch-at32ap/portmux.h | 12 +
|
|
include/asm-avr32/dma-controller.h | 166 +++
|
|
include/asm-avr32/irq.h | 5 +
|
|
include/asm-avr32/kdebug.h | 1 +
|
|
include/asm-avr32/ocd.h | 5 +
|
|
include/asm-avr32/processor.h | 14 +
|
|
include/asm-avr32/ptrace.h | 13 +-
|
|
include/asm-avr32/thread_info.h | 1 +
|
|
include/linux/atmel_pwm.h | 70 ++
|
|
include/video/atmel_lcdc.h | 25 +-
|
|
kernel/ptrace.c | 2 +
|
|
sound/Kconfig | 2 +
|
|
sound/Makefile | 2 +-
|
|
sound/avr32/Kconfig | 11 +
|
|
sound/avr32/Makefile | 3 +
|
|
sound/avr32/ac97c.c | 914 ++++++++++++++
|
|
sound/avr32/ac97c.h | 71 ++
|
|
sound/oss/Kconfig | 4 +
|
|
sound/oss/Makefile | 1 +
|
|
sound/oss/at32_abdac.c | 722 +++++++++++
|
|
sound/oss/at32_abdac.h | 59 +
|
|
101 files changed, 13294 insertions(+), 2520 deletions(-)
|
|
create mode 100644 arch/avr32/boards/atngw100/Kconfig
|
|
create mode 100644 arch/avr32/boards/atstk1000/atstk1003.c
|
|
create mode 100644 arch/avr32/boards/atstk1000/atstk1004.c
|
|
create mode 100644 arch/avr32/configs/atstk1003_defconfig
|
|
create mode 100644 arch/avr32/configs/atstk1004_defconfig
|
|
create mode 100644 arch/avr32/drivers/Makefile
|
|
create mode 100644 arch/avr32/drivers/dw-dmac.c
|
|
create mode 100644 arch/avr32/drivers/dw-dmac.h
|
|
create mode 100644 arch/avr32/kernel/dma-controller.c
|
|
create mode 100644 arch/avr32/kernel/nmi_debug.c
|
|
create mode 100644 arch/avr32/kernel/ocd.c
|
|
delete mode 100644 arch/avr32/mach-at32ap/at32ap7000.c
|
|
create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c
|
|
create mode 100644 arch/avr32/mach-at32ap/gpio-dev.c
|
|
create mode 100644 arch/avr32/oprofile/Makefile
|
|
create mode 100644 arch/avr32/oprofile/op_model_avr32.c
|
|
create mode 100644 drivers/i2c/busses/i2c-atmeltwi.c
|
|
create mode 100644 drivers/i2c/busses/i2c-atmeltwi.h
|
|
create mode 100644 drivers/leds/leds-atmel-pwm.c
|
|
create mode 100644 drivers/misc/atmel_pwm.c
|
|
create mode 100644 drivers/mmc/host/atmel-mci.c
|
|
create mode 100644 drivers/mmc/host/atmel-mci.h
|
|
create mode 100644 drivers/pcmcia/at32_cf.c
|
|
delete mode 100644 include/asm-avr32/arch-at32ap/at32ap7000.h
|
|
create mode 100644 include/asm-avr32/arch-at32ap/at32ap700x.h
|
|
create mode 100644 include/asm-avr32/dma-controller.h
|
|
create mode 100644 include/linux/atmel_pwm.h
|
|
create mode 100644 sound/avr32/Kconfig
|
|
create mode 100644 sound/avr32/Makefile
|
|
create mode 100644 sound/avr32/ac97c.c
|
|
create mode 100644 sound/avr32/ac97c.h
|
|
create mode 100644 sound/oss/at32_abdac.c
|
|
create mode 100644 sound/oss/at32_abdac.h
|
|
|
|
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
|
|
index c417877..17fc60e 100644
|
|
--- a/Documentation/kernel-parameters.txt
|
|
+++ b/Documentation/kernel-parameters.txt
|
|
@@ -34,6 +34,7 @@ parameter is applicable:
|
|
ALSA ALSA sound support is enabled.
|
|
APIC APIC support is enabled.
|
|
APM Advanced Power Management support is enabled.
|
|
+ AVR32 AVR32 architecture is enabled.
|
|
AX25 Appropriate AX.25 support is enabled.
|
|
BLACKFIN Blackfin architecture is enabled.
|
|
DRM Direct Rendering Management support is enabled.
|
|
@@ -1123,6 +1124,10 @@ and is between 256 and 4096 characters. It is defined in the file
|
|
of returning the full 64-bit number.
|
|
The default is to return 64-bit inode numbers.
|
|
|
|
+ nmi_debug= [KNL,AVR32] Specify one or more actions to take
|
|
+ when a NMI is triggered.
|
|
+ Format: [state][,regs][,debounce][,die]
|
|
+
|
|
nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels
|
|
|
|
no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
|
|
diff --git a/MAINTAINERS b/MAINTAINERS
|
|
index 2340cfb..e349a9e 100644
|
|
--- a/MAINTAINERS
|
|
+++ b/MAINTAINERS
|
|
@@ -671,6 +671,12 @@ W: http://www.atmel.com/products/AT91/
|
|
W: http://www.at91.com/
|
|
S: Maintained
|
|
|
|
+ATMEL AT91 / AT32 SERIAL DRIVER
|
|
+P: Haavard Skinnemoen
|
|
+M: hskinnemoen@atmel.com
|
|
+L: linux-kernel@vger.kernel.org
|
|
+S: Supported
|
|
+
|
|
ATMEL LCDFB DRIVER
|
|
P: Nicolas Ferre
|
|
M: nicolas.ferre@atmel.com
|
|
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
|
|
index 64979a9..bfa3d18 100644
|
|
--- a/arch/arm/mach-at91/at91sam9261_devices.c
|
|
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
|
|
@@ -530,6 +530,20 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
|
|
at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
|
|
at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
|
|
|
|
+#ifdef CONFIG_FB_INTSRAM
|
|
+ {
|
|
+ void __iomem *fb;
|
|
+ struct resource *fb_res = &lcdc_resources[2];
|
|
+ size_t fb_len = fb_res->end - fb_res->start + 1;
|
|
+
|
|
+ fb = ioremap_writecombine(fb_res->start, fb_len);
|
|
+ if (fb) {
|
|
+ memset(fb, 0, fb_len);
|
|
+ iounmap(fb, fb_len);
|
|
+ }
|
|
+ }
|
|
+#endif
|
|
+
|
|
lcdc_data = *data;
|
|
platform_device_register(&at91_lcdc_device);
|
|
}
|
|
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
|
|
index 2bd60a3..84ee029 100644
|
|
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
|
|
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
|
|
@@ -375,6 +375,20 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
|
|
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
|
|
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
|
|
|
|
+#ifdef CONFIG_FB_INTSRAM
|
|
+ {
|
|
+ void __iomem *fb;
|
|
+ struct resource *fb_res = &lcdc_resources[2];
|
|
+ size_t fb_len = fb_res->end - fb_res->start + 1;
|
|
+
|
|
+ fb = ioremap_writecombine(fb_res->start, fb_len);
|
|
+ if (fb) {
|
|
+ memset(fb, 0, fb_len);
|
|
+ iounmap(fb, fb_len);
|
|
+ }
|
|
+ }
|
|
+#endif
|
|
+
|
|
lcdc_data = *data;
|
|
platform_device_register(&at91_lcdc_device);
|
|
}
|
|
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
|
|
index 550ae59..0d275bb 100644
|
|
--- a/arch/arm/mach-at91/board-sam9261ek.c
|
|
+++ b/arch/arm/mach-at91/board-sam9261ek.c
|
|
@@ -322,6 +322,7 @@ static void at91_lcdc_power_control(int on)
|
|
|
|
/* Driver datas */
|
|
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
|
|
+ .lcdcon_is_backlight = true,
|
|
.default_bpp = 16,
|
|
.default_dmacon = ATMEL_LCDC_DMAEN,
|
|
.default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
|
|
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
|
|
index ab9dcc0..39bded2 100644
|
|
--- a/arch/arm/mach-at91/board-sam9263ek.c
|
|
+++ b/arch/arm/mach-at91/board-sam9263ek.c
|
|
@@ -250,6 +250,7 @@ static void at91_lcdc_power_control(int on)
|
|
|
|
/* Driver datas */
|
|
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
|
|
+ .lcdcon_is_backlight = true,
|
|
.default_bpp = 16,
|
|
.default_dmacon = ATMEL_LCDC_DMAEN,
|
|
.default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
|
|
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
|
|
index b77abce..3f09270 100644
|
|
--- a/arch/avr32/Kconfig
|
|
+++ b/arch/avr32/Kconfig
|
|
@@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32
|
|
config ARCH_HAS_ILOG2_U64
|
|
def_bool n
|
|
|
|
+config ARCH_SUPPORTS_OPROFILE
|
|
+ def_bool y
|
|
+
|
|
config GENERIC_HWEIGHT
|
|
def_bool y
|
|
|
|
@@ -81,19 +84,23 @@ config PLATFORM_AT32AP
|
|
select MMU
|
|
select PERFORMANCE_COUNTERS
|
|
|
|
-choice
|
|
- prompt "AVR32 CPU type"
|
|
- default CPU_AT32AP7000
|
|
+#
|
|
+# CPU types
|
|
+#
|
|
|
|
-config CPU_AT32AP7000
|
|
- bool "AT32AP7000"
|
|
+# AP7000 derivatives
|
|
+config CPU_AT32AP700X
|
|
+ bool
|
|
select PLATFORM_AT32AP
|
|
-endchoice
|
|
-
|
|
-#
|
|
-# CPU Daughterboards for ATSTK1000
|
|
-config BOARD_ATSTK1002
|
|
+config CPU_AT32AP7000
|
|
+ bool
|
|
+ select CPU_AT32AP700X
|
|
+config CPU_AT32AP7001
|
|
+ bool
|
|
+ select CPU_AT32AP700X
|
|
+config CPU_AT32AP7002
|
|
bool
|
|
+ select CPU_AT32AP700X
|
|
|
|
choice
|
|
prompt "AVR32 board type"
|
|
@@ -101,15 +108,18 @@ choice
|
|
|
|
config BOARD_ATSTK1000
|
|
bool "ATSTK1000 evaluation board"
|
|
- select BOARD_ATSTK1002 if CPU_AT32AP7000
|
|
|
|
config BOARD_ATNGW100
|
|
bool "ATNGW100 Network Gateway"
|
|
+ select CPU_AT32AP7000
|
|
endchoice
|
|
|
|
if BOARD_ATSTK1000
|
|
source "arch/avr32/boards/atstk1000/Kconfig"
|
|
endif
|
|
+if BOARD_ATNGW100
|
|
+source "arch/avr32/boards/atngw100/Kconfig"
|
|
+endif
|
|
|
|
choice
|
|
prompt "Boot loader type"
|
|
@@ -123,15 +133,15 @@ source "arch/avr32/mach-at32ap/Kconfig"
|
|
|
|
config LOAD_ADDRESS
|
|
hex
|
|
- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
|
|
+ default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
|
|
|
|
config ENTRY_ADDRESS
|
|
hex
|
|
- default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
|
|
+ default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
|
|
|
|
config PHYS_OFFSET
|
|
hex
|
|
- default 0x10000000 if CPU_AT32AP7000=y
|
|
+ default 0x10000000 if CPU_AT32AP700X=y
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
@@ -163,6 +173,20 @@ config OWNERSHIP_TRACE
|
|
enabling Nexus-compliant debuggers to keep track of the PID of the
|
|
currently executing task.
|
|
|
|
+config NMI_DEBUGGING
|
|
+ bool "NMI Debugging"
|
|
+ default n
|
|
+ help
|
|
+ Say Y here and pass the nmi_debug command-line parameter to
|
|
+ the kernel to turn on NMI debugging. Depending on the value
|
|
+ of the nmi_debug option, various pieces of information will
|
|
+ be dumped to the console when a Non-Maskable Interrupt
|
|
+ happens.
|
|
+
|
|
+config DW_DMAC
|
|
+ tristate "Synopsys DesignWare DMA Controller support"
|
|
+ default y if CPU_AT32AP7000
|
|
+
|
|
# FPU emulation goes here
|
|
|
|
source "kernel/Kconfig.hz"
|
|
@@ -219,6 +243,8 @@ source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
+source "kernel/Kconfig.instrumentation"
|
|
+
|
|
source "arch/avr32/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
diff --git a/arch/avr32/Kconfig.debug b/arch/avr32/Kconfig.debug
|
|
index 64ace00..2283933 100644
|
|
--- a/arch/avr32/Kconfig.debug
|
|
+++ b/arch/avr32/Kconfig.debug
|
|
@@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT
|
|
|
|
source "lib/Kconfig.debug"
|
|
|
|
-config KPROBES
|
|
- bool "Kprobes"
|
|
- depends on DEBUG_KERNEL
|
|
- help
|
|
- Kprobes allows you to trap at almost any kernel address and
|
|
- execute a callback function. register_kprobe() establishes
|
|
- a probepoint and specifies the callback. Kprobes is useful
|
|
- for kernel debugging, non-intrusive instrumentation and testing.
|
|
- If in doubt, say "N".
|
|
-
|
|
endmenu
|
|
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
|
|
index 8791864..2d7bacd 100644
|
|
--- a/arch/avr32/Makefile
|
|
+++ b/arch/avr32/Makefile
|
|
@@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic
|
|
CFLAGS_MODULE += -mno-relax
|
|
LDFLAGS_vmlinux += --relax
|
|
|
|
-cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
|
|
+cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap
|
|
|
|
KBUILD_CFLAGS += $(cpuflags-y)
|
|
KBUILD_AFLAGS += $(cpuflags-y)
|
|
@@ -31,6 +31,8 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
|
|
core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
|
|
core-y += arch/avr32/kernel/
|
|
core-y += arch/avr32/mm/
|
|
+drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
|
|
+drivers-y += arch/avr32/drivers/
|
|
libs-y += arch/avr32/lib/
|
|
|
|
archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
|
|
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
|
|
new file mode 100644
|
|
index 0000000..5d922df
|
|
--- /dev/null
|
|
+++ b/arch/avr32/boards/atngw100/Kconfig
|
|
@@ -0,0 +1,12 @@
|
|
+# NGW100 customization
|
|
+
|
|
+config BOARD_ATNGW100_I2C_GPIO
|
|
+ bool "Use GPIO for i2c instead of built-in TWI module"
|
|
+ help
|
|
+ The driver for the built-in TWI module has been plagued by
|
|
+ various problems, while the i2c-gpio driver is based on the
|
|
+ trusty old i2c-algo-bit bitbanging engine, making it work
|
|
+ on pretty much any setup.
|
|
+
|
|
+ Choose 'Y' here if you're having i2c-related problems and
|
|
+ want to rule out the i2c bus driver.
|
|
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
|
|
index 52987c8..383b825 100644
|
|
--- a/arch/avr32/boards/atngw100/setup.c
|
|
+++ b/arch/avr32/boards/atngw100/setup.c
|
|
@@ -20,7 +20,7 @@
|
|
#include <asm/io.h>
|
|
#include <asm/setup.h>
|
|
|
|
-#include <asm/arch/at32ap7000.h>
|
|
+#include <asm/arch/at32ap700x.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/init.h>
|
|
#include <asm/arch/portmux.h>
|
|
@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
|
|
},
|
|
};
|
|
|
|
+static struct mci_platform_data __initdata mci0_data = {
|
|
+ .detect_pin = GPIO_PIN_PC(25),
|
|
+ .wp_pin = GPIO_PIN_PE(0),
|
|
+};
|
|
+
|
|
/*
|
|
* The next two functions should go away as the boot loader is
|
|
* supposed to initialize the macb address registers with a valid
|
|
@@ -124,6 +129,7 @@ static struct platform_device ngw_gpio_leds = {
|
|
}
|
|
};
|
|
|
|
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
|
|
static struct i2c_gpio_platform_data i2c_gpio_data = {
|
|
.sda_pin = GPIO_PIN_PA(6),
|
|
.scl_pin = GPIO_PIN_PA(7),
|
|
@@ -139,6 +145,7 @@ static struct platform_device i2c_gpio_device = {
|
|
.platform_data = &i2c_gpio_data,
|
|
},
|
|
};
|
|
+#endif
|
|
|
|
static int __init atngw100_init(void)
|
|
{
|
|
@@ -157,6 +164,7 @@ static int __init atngw100_init(void)
|
|
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
|
|
|
|
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
|
|
+ at32_add_device_mci(0, &mci0_data);
|
|
at32_add_device_usba(0, NULL);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
|
|
@@ -165,11 +173,15 @@ static int __init atngw100_init(void)
|
|
}
|
|
platform_device_register(&ngw_gpio_leds);
|
|
|
|
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
|
|
at32_select_gpio(i2c_gpio_data.sda_pin,
|
|
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
|
|
at32_select_gpio(i2c_gpio_data.scl_pin,
|
|
AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
|
|
platform_device_register(&i2c_gpio_device);
|
|
+#else
|
|
+ at32_add_device_twi(0);
|
|
+#endif
|
|
|
|
return 0;
|
|
}
|
|
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
|
|
index 718578f..56a8d8e 100644
|
|
--- a/arch/avr32/boards/atstk1000/Kconfig
|
|
+++ b/arch/avr32/boards/atstk1000/Kconfig
|
|
@@ -1,34 +1,53 @@
|
|
# STK1000 customization
|
|
|
|
-if BOARD_ATSTK1002
|
|
+if BOARD_ATSTK1000
|
|
|
|
-config BOARD_ATSTK1002_CUSTOM
|
|
- bool "Non-default STK-1002 jumper settings"
|
|
+choice
|
|
+ prompt "ATSTK1000 CPU daughterboard type"
|
|
+ default BOARD_ATSTK1002
|
|
+
|
|
+config BOARD_ATSTK1002
|
|
+ bool "ATSTK1002"
|
|
+ select CPU_AT32AP7000
|
|
+
|
|
+config BOARD_ATSTK1003
|
|
+ bool "ATSTK1003"
|
|
+ select CPU_AT32AP7001
|
|
+
|
|
+config BOARD_ATSTK1004
|
|
+ bool "ATSTK1004"
|
|
+ select CPU_AT32AP7002
|
|
+
|
|
+endchoice
|
|
+
|
|
+
|
|
+config BOARD_ATSTK100X_CUSTOM
|
|
+ bool "Non-default STK1002/STK1003/STK1004 jumper settings"
|
|
help
|
|
You will normally leave the jumpers on the CPU card at their
|
|
default settings. If you need to use certain peripherals,
|
|
you will need to change some of those jumpers.
|
|
|
|
-if BOARD_ATSTK1002_CUSTOM
|
|
+if BOARD_ATSTK100X_CUSTOM
|
|
|
|
-config BOARD_ATSTK1002_SW1_CUSTOM
|
|
+config BOARD_ATSTK100X_SW1_CUSTOM
|
|
bool "SW1: use SSC1 (not SPI0)"
|
|
help
|
|
This also prevents using the external DAC as an audio interface,
|
|
and means you can't initialize the on-board QVGA display.
|
|
|
|
-config BOARD_ATSTK1002_SW2_CUSTOM
|
|
+config BOARD_ATSTK100X_SW2_CUSTOM
|
|
bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
|
|
help
|
|
If you change this you'll want an updated boot loader putting
|
|
the console on UART-C not UART-A.
|
|
|
|
-config BOARD_ATSTK1002_SW3_CUSTOM
|
|
+config BOARD_ATSTK100X_SW3_CUSTOM
|
|
bool "SW3: use TIMER1 (not SSC0 and GCLK)"
|
|
help
|
|
This also prevents using the external DAC as an audio interface.
|
|
|
|
-config BOARD_ATSTK1002_SW4_CUSTOM
|
|
+config BOARD_ATSTK100X_SW4_CUSTOM
|
|
bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
|
|
help
|
|
To use the camera interface you'll need a custom card (on the
|
|
@@ -36,27 +55,29 @@ config BOARD_ATSTK1002_SW4_CUSTOM
|
|
|
|
config BOARD_ATSTK1002_SW5_CUSTOM
|
|
bool "SW5: use MACB1 (not LCDC)"
|
|
+ depends on BOARD_ATSTK1002
|
|
|
|
config BOARD_ATSTK1002_SW6_CUSTOM
|
|
bool "SW6: more GPIOs (not MACB0)"
|
|
+ depends on BOARD_ATSTK1002
|
|
|
|
endif # custom
|
|
|
|
-config BOARD_ATSTK1002_SPI1
|
|
+config BOARD_ATSTK100X_SPI1
|
|
bool "Configure SPI1 controller"
|
|
- depends on !BOARD_ATSTK1002_SW4_CUSTOM
|
|
+ depends on !BOARD_ATSTK100X_SW4_CUSTOM
|
|
help
|
|
All the signals for the second SPI controller are available on
|
|
GPIO lines and accessed through the J1 jumper block. Say "y"
|
|
here to configure that SPI controller.
|
|
|
|
-config BOARD_ATSTK1002_J2_LED
|
|
+config BOARD_ATSTK1000_J2_LED
|
|
bool
|
|
- default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
|
|
+ default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
|
|
|
|
choice
|
|
prompt "LEDs connected to J2:"
|
|
- depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
|
|
+ depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
|
|
optional
|
|
help
|
|
Select this if you have jumpered the J2 jumper block to the
|
|
@@ -64,16 +85,64 @@ choice
|
|
IDC cable. A default "heartbeat" trigger is provided, but
|
|
you can of course override this.
|
|
|
|
-config BOARD_ATSTK1002_J2_LED8
|
|
+config BOARD_ATSTK1000_J2_LED8
|
|
bool "LED0..LED7"
|
|
help
|
|
Select this if J2 is jumpered to LED0..LED7 amber leds.
|
|
|
|
-config BOARD_ATSTK1002_J2_RGB
|
|
+config BOARD_ATSTK1000_J2_RGB
|
|
bool "RGB leds"
|
|
help
|
|
Select this if J2 is jumpered to the RGB leds.
|
|
|
|
endchoice
|
|
|
|
-endif # stk 1002
|
|
+config BOARD_ATSTK1000_EXTDAC
|
|
+ bool
|
|
+ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
|
|
+ default y
|
|
+
|
|
+config BOARD_ATSTK100X_ENABLE_AC97
|
|
+ bool "Use AC97C instead of ABDAC"
|
|
+ help
|
|
+ Select this if you want to use the built-in AC97 controller
|
|
+ instead of the built-in Audio Bitstream DAC. These share
|
|
+ the same I/O pins on the AP7000, so both can't be enabled
|
|
+ at the same time.
|
|
+
|
|
+ Note that the STK1000 kit doesn't ship with an AC97 codec on
|
|
+ board, so say N unless you've got an expansion board with an
|
|
+ AC97 codec on it that you want to use.
|
|
+
|
|
+config BOARD_ATSTK1000_CF_HACKS
|
|
+ bool "ATSTK1000 CompactFlash hacks"
|
|
+ depends on !BOARD_ATSTK100X_SW4_CUSTOM
|
|
+ help
|
|
+ Select this if you have re-routed the CompactFlash RESET and
|
|
+ CD signals to GPIOs on your STK1000. This is necessary for
|
|
+ reset and card detection to work properly, although some CF
|
|
+ cards may be able to cope without reset.
|
|
+
|
|
+config BOARD_ATSTK1000_CF_RESET_PIN
|
|
+ hex "CompactFlash RESET pin"
|
|
+ default 0x30
|
|
+ depends on BOARD_ATSTK1000_CF_HACKS
|
|
+ help
|
|
+ Select which GPIO pin to use for the CompactFlash RESET
|
|
+ signal. This is specified as a hexadecimal number and should
|
|
+ be defined as 0x20 * gpio_port + pin.
|
|
+
|
|
+ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
|
|
+
|
|
+config BOARD_ATSTK1000_CF_DETECT_PIN
|
|
+ hex "CompactFlash DETECT pin"
|
|
+ default 0x3e
|
|
+ depends on BOARD_ATSTK1000_CF_HACKS
|
|
+ help
|
|
+ Select which GPIO pin to use for the CompactFlash CD
|
|
+ signal. This is specified as a hexadecimal number and should
|
|
+ be defined as 0x20 * gpio_port + pin.
|
|
+
|
|
+ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
|
|
+
|
|
+endif # stk 1000
|
|
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
|
|
index 8e09922..beead86 100644
|
|
--- a/arch/avr32/boards/atstk1000/Makefile
|
|
+++ b/arch/avr32/boards/atstk1000/Makefile
|
|
@@ -1,2 +1,4 @@
|
|
obj-y += setup.o flash.o
|
|
obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
|
|
+obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
|
|
+obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
|
|
diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
|
|
index 9a49ed0..9392d32 100644
|
|
--- a/arch/avr32/boards/atstk1000/atstk1000.h
|
|
+++ b/arch/avr32/boards/atstk1000/atstk1000.h
|
|
@@ -12,4 +12,6 @@
|
|
|
|
extern struct atmel_lcdfb_info atstk1000_lcdc_data;
|
|
|
|
+void atstk1000_setup_j2_leds(void);
|
|
+
|
|
#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
|
|
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
|
|
index 5be0d13..90436fa 100644
|
|
--- a/arch/avr32/boards/atstk1000/atstk1002.c
|
|
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
|
|
@@ -11,7 +11,6 @@
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
-#include <linux/leds.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
@@ -22,7 +21,7 @@
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/setup.h>
|
|
-#include <asm/arch/at32ap7000.h>
|
|
+#include <asm/arch/at32ap700x.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/init.h>
|
|
#include <asm/arch/portmux.h>
|
|
@@ -49,18 +48,16 @@ static struct eth_platform_data __initdata eth_data[2] = {
|
|
},
|
|
};
|
|
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
static struct at73c213_board_info at73c213_data = {
|
|
.ssc_id = 0,
|
|
.shortname = "AVR32 STK1000 external DAC",
|
|
};
|
|
#endif
|
|
-#endif
|
|
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
|
|
static struct spi_board_info spi0_board_info[] __initdata = {
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
{
|
|
/* AT73C213 */
|
|
.modalias = "at73c213",
|
|
@@ -80,12 +77,25 @@ static struct spi_board_info spi0_board_info[] __initdata = {
|
|
};
|
|
#endif
|
|
|
|
-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
|
|
static struct spi_board_info spi1_board_info[] __initdata = { {
|
|
/* patch in custom entries here */
|
|
} };
|
|
#endif
|
|
|
|
+static struct cf_platform_data __initdata cf0_data = {
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
|
|
+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
|
|
+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
|
|
+#else
|
|
+ .detect_pin = GPIO_PIN_NONE,
|
|
+ .reset_pin = GPIO_PIN_NONE,
|
|
+#endif
|
|
+ .vcc_pin = GPIO_PIN_NONE,
|
|
+ .ready_pin = GPIO_PIN_PB(27),
|
|
+ .cs = 4,
|
|
+};
|
|
+
|
|
/*
|
|
* The next two functions should go away as the boot loader is
|
|
* supposed to initialize the macb address registers with a valid
|
|
@@ -141,68 +151,8 @@ static void __init set_hw_addr(struct platform_device *pdev)
|
|
clk_put(pclk);
|
|
}
|
|
|
|
-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
|
|
-
|
|
-static struct gpio_led stk_j2_led[] = {
|
|
-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
|
|
-#define LEDSTRING "J2 jumpered to LED8"
|
|
- { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
|
|
- { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
|
|
- { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
|
|
- { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
|
|
- { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
|
|
- { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
|
|
- { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
|
|
- { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
|
|
- .default_trigger = "heartbeat", },
|
|
-#else /* RGB */
|
|
-#define LEDSTRING "J2 jumpered to RGB LEDs"
|
|
- { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
|
|
- { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
|
|
- { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
|
|
-
|
|
- { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
|
|
- .default_trigger = "heartbeat", },
|
|
- { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
|
|
- { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
|
|
- .default_trigger = "heartbeat", },
|
|
- /* PB16, PB30 unused */
|
|
-#endif
|
|
-};
|
|
-
|
|
-static struct gpio_led_platform_data stk_j2_led_data = {
|
|
- .num_leds = ARRAY_SIZE(stk_j2_led),
|
|
- .leds = stk_j2_led,
|
|
-};
|
|
-
|
|
-static struct platform_device stk_j2_led_dev = {
|
|
- .name = "leds-gpio",
|
|
- .id = 2, /* gpio block J2 */
|
|
- .dev = {
|
|
- .platform_data = &stk_j2_led_data,
|
|
- },
|
|
-};
|
|
-
|
|
-static void setup_j2_leds(void)
|
|
-{
|
|
- unsigned i;
|
|
-
|
|
- for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
|
|
- at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
|
|
-
|
|
- printk("STK1002: " LEDSTRING "\n");
|
|
- platform_device_register(&stk_j2_led_dev);
|
|
-}
|
|
-
|
|
-#else
|
|
-static void setup_j2_leds(void)
|
|
-{
|
|
-}
|
|
-#endif
|
|
-
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
|
|
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
+static void __init atstk1002_setup_extdac(void)
|
|
{
|
|
struct clk *gclk;
|
|
struct clk *pll;
|
|
@@ -220,7 +170,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info)
|
|
}
|
|
|
|
at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
|
|
- info->dac_clk = gclk;
|
|
+ at73c213_data.dac_clk = gclk;
|
|
|
|
err_set_clk:
|
|
clk_put(pll);
|
|
@@ -229,12 +179,16 @@ err_pll:
|
|
err_gclk:
|
|
return;
|
|
}
|
|
-#endif
|
|
-#endif
|
|
+#else
|
|
+static void __init atstk1002_setup_extdac(void)
|
|
+{
|
|
+
|
|
+}
|
|
+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
|
|
|
|
void __init setup_board(void)
|
|
{
|
|
-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
|
|
#else
|
|
at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
|
|
@@ -271,7 +225,7 @@ static int __init atstk1002_init(void)
|
|
|
|
at32_add_system_devices();
|
|
|
|
-#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
at32_add_device_usart(1);
|
|
#else
|
|
at32_add_device_usart(0);
|
|
@@ -281,12 +235,16 @@ static int __init atstk1002_init(void)
|
|
#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
|
|
set_hw_addr(at32_add_device_eth(0, ð_data[0]));
|
|
#endif
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
|
|
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
|
|
#endif
|
|
-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
|
|
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
|
|
#endif
|
|
+ at32_add_device_twi(0);
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
+ at32_add_device_mci(0, NULL);
|
|
+#endif
|
|
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
|
|
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
|
|
#else
|
|
@@ -294,17 +252,18 @@ static int __init atstk1002_init(void)
|
|
fbmem_start, fbmem_size);
|
|
#endif
|
|
at32_add_device_usba(0, NULL);
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
|
+ at32_add_device_ac97c(0);
|
|
+#else
|
|
+ at32_add_device_abdac(0);
|
|
+#endif
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
|
|
at32_add_device_ssc(0, ATMEL_SSC_TX);
|
|
#endif
|
|
+ at32_add_device_cf(0, 2, &cf0_data);
|
|
|
|
- setup_j2_leds();
|
|
-
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
|
|
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
|
|
- at73c213_set_clk(&at73c213_data);
|
|
-#endif
|
|
-#endif
|
|
+ atstk1000_setup_j2_leds();
|
|
+ atstk1002_setup_extdac();
|
|
|
|
return 0;
|
|
}
|
|
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
|
|
new file mode 100644
|
|
index 0000000..768d204
|
|
--- /dev/null
|
|
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
|
|
@@ -0,0 +1,181 @@
|
|
+/*
|
|
+ * ATSTK1003 daughterboard-specific init code
|
|
+ *
|
|
+ * Copyright (C) 2007 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/types.h>
|
|
+
|
|
+#include <linux/spi/at73c213.h>
|
|
+#include <linux/spi/spi.h>
|
|
+
|
|
+#include <asm/setup.h>
|
|
+
|
|
+#include <asm/arch/at32ap700x.h>
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/init.h>
|
|
+#include <asm/arch/portmux.h>
|
|
+
|
|
+#include "atstk1000.h"
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
+static struct at73c213_board_info at73c213_data = {
|
|
+ .ssc_id = 0,
|
|
+ .shortname = "AVR32 STK1000 external DAC",
|
|
+};
|
|
+#endif
|
|
+
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
|
|
+static struct spi_board_info spi0_board_info[] __initdata = {
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
+ {
|
|
+ /* AT73C213 */
|
|
+ .modalias = "at73c213",
|
|
+ .max_speed_hz = 200000,
|
|
+ .chip_select = 0,
|
|
+ .mode = SPI_MODE_1,
|
|
+ .platform_data = &at73c213_data,
|
|
+ },
|
|
+#endif
|
|
+ /*
|
|
+ * We can control the LTV350QV LCD panel, but it isn't much
|
|
+ * point since we don't have an LCD controller...
|
|
+ */
|
|
+};
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
|
|
+static struct spi_board_info spi1_board_info[] __initdata = { {
|
|
+ /* patch in custom entries here */
|
|
+} };
|
|
+#endif
|
|
+
|
|
+static struct cf_platform_data __initdata cf0_data = {
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
|
|
+ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
|
|
+ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
|
|
+#else
|
|
+ .detect_pin = GPIO_PIN_NONE,
|
|
+ .reset_pin = GPIO_PIN_NONE,
|
|
+#endif
|
|
+ .vcc_pin = GPIO_PIN_NONE,
|
|
+ .ready_pin = GPIO_PIN_PB(27),
|
|
+ .cs = 4,
|
|
+};
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
+static void __init atstk1003_setup_extdac(void)
|
|
+{
|
|
+ struct clk *gclk;
|
|
+ struct clk *pll;
|
|
+
|
|
+ gclk = clk_get(NULL, "gclk0");
|
|
+ if (IS_ERR(gclk))
|
|
+ goto err_gclk;
|
|
+ pll = clk_get(NULL, "pll0");
|
|
+ if (IS_ERR(pll))
|
|
+ goto err_pll;
|
|
+
|
|
+ if (clk_set_parent(gclk, pll)) {
|
|
+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
|
|
+ goto err_set_clk;
|
|
+ }
|
|
+
|
|
+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
|
|
+ at73c213_data.dac_clk = gclk;
|
|
+
|
|
+err_set_clk:
|
|
+ clk_put(pll);
|
|
+err_pll:
|
|
+ clk_put(gclk);
|
|
+err_gclk:
|
|
+ return;
|
|
+}
|
|
+#else
|
|
+static void __init atstk1003_setup_extdac(void)
|
|
+{
|
|
+
|
|
+}
|
|
+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
|
|
+
|
|
+void __init setup_board(void)
|
|
+{
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
|
|
+#else
|
|
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
|
|
+#endif
|
|
+ /* USART 2/unused: expansion connector */
|
|
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
|
|
+
|
|
+ at32_setup_serial_console(0);
|
|
+}
|
|
+
|
|
+static int __init atstk1003_init(void)
|
|
+{
|
|
+ /*
|
|
+ * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
|
|
+ * SDRAM-specific pins so that nobody messes with them.
|
|
+ */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */
|
|
+ at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */
|
|
+
|
|
+ at32_add_system_devices();
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
+ at32_add_device_usart(1);
|
|
+#else
|
|
+ at32_add_device_usart(0);
|
|
+#endif
|
|
+ at32_add_device_usart(2);
|
|
+
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
|
|
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
|
|
+#endif
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
|
|
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
|
|
+#endif
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
+ at32_add_device_mci(0, NULL);
|
|
+#endif
|
|
+ at32_add_device_usba(0, NULL);
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
|
+ at32_add_device_ac97c(0);
|
|
+#else
|
|
+ at32_add_device_abdac(0);
|
|
+#endif
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
|
|
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
|
|
+#endif
|
|
+ at32_add_device_cf(0, 2, &cf0_data);
|
|
+
|
|
+ atstk1000_setup_j2_leds();
|
|
+ atstk1003_setup_extdac();
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+postcore_initcall(atstk1003_init);
|
|
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
|
|
new file mode 100644
|
|
index 0000000..96015dd
|
|
--- /dev/null
|
|
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
|
|
@@ -0,0 +1,152 @@
|
|
+/*
|
|
+ * ATSTK1003 daughterboard-specific init code
|
|
+ *
|
|
+ * Copyright (C) 2007 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/types.h>
|
|
+
|
|
+#include <linux/spi/at73c213.h>
|
|
+#include <linux/spi/spi.h>
|
|
+
|
|
+#include <video/atmel_lcdc.h>
|
|
+
|
|
+#include <asm/setup.h>
|
|
+
|
|
+#include <asm/arch/at32ap700x.h>
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/init.h>
|
|
+#include <asm/arch/portmux.h>
|
|
+
|
|
+#include "atstk1000.h"
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
+static struct at73c213_board_info at73c213_data = {
|
|
+ .ssc_id = 0,
|
|
+ .shortname = "AVR32 STK1000 external DAC",
|
|
+};
|
|
+#endif
|
|
+
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
|
|
+static struct spi_board_info spi0_board_info[] __initdata = {
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
+ {
|
|
+ /* AT73C213 */
|
|
+ .modalias = "at73c213",
|
|
+ .max_speed_hz = 200000,
|
|
+ .chip_select = 0,
|
|
+ .mode = SPI_MODE_1,
|
|
+ .platform_data = &at73c213_data,
|
|
+ },
|
|
+#endif
|
|
+ {
|
|
+ /* QVGA display */
|
|
+ .modalias = "ltv350qv",
|
|
+ .max_speed_hz = 16000000,
|
|
+ .chip_select = 1,
|
|
+ .mode = SPI_MODE_3,
|
|
+ },
|
|
+};
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
|
|
+static struct spi_board_info spi1_board_info[] __initdata = { {
|
|
+ /* patch in custom entries here */
|
|
+} };
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
|
|
+static void __init atstk1004_setup_extdac(void)
|
|
+{
|
|
+ struct clk *gclk;
|
|
+ struct clk *pll;
|
|
+
|
|
+ gclk = clk_get(NULL, "gclk0");
|
|
+ if (IS_ERR(gclk))
|
|
+ goto err_gclk;
|
|
+ pll = clk_get(NULL, "pll0");
|
|
+ if (IS_ERR(pll))
|
|
+ goto err_pll;
|
|
+
|
|
+ if (clk_set_parent(gclk, pll)) {
|
|
+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
|
|
+ goto err_set_clk;
|
|
+ }
|
|
+
|
|
+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
|
|
+ at73c213_data.dac_clk = gclk;
|
|
+
|
|
+err_set_clk:
|
|
+ clk_put(pll);
|
|
+err_pll:
|
|
+ clk_put(gclk);
|
|
+err_gclk:
|
|
+ return;
|
|
+}
|
|
+#else
|
|
+static void __init atstk1004_setup_extdac(void)
|
|
+{
|
|
+
|
|
+}
|
|
+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
|
|
+
|
|
+void __init setup_board(void)
|
|
+{
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
|
|
+#else
|
|
+ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
|
|
+#endif
|
|
+ /* USART 2/unused: expansion connector */
|
|
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
|
|
+
|
|
+ at32_setup_serial_console(0);
|
|
+}
|
|
+
|
|
+static int __init atstk1004_init(void)
|
|
+{
|
|
+ at32_add_system_devices();
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
+ at32_add_device_usart(1);
|
|
+#else
|
|
+ at32_add_device_usart(0);
|
|
+#endif
|
|
+ at32_add_device_usart(2);
|
|
+
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
|
|
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
|
|
+#endif
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
|
|
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
|
|
+#endif
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
|
|
+ at32_add_device_mci(0, NULL);
|
|
+#endif
|
|
+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
|
|
+ fbmem_start, fbmem_size);
|
|
+ at32_add_device_usba(0, NULL);
|
|
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
|
|
+ at32_add_device_ac97c(0);
|
|
+#else
|
|
+ at32_add_device_abdac(0);
|
|
+#endif
|
|
+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
|
|
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
|
|
+#endif
|
|
+
|
|
+ atstk1000_setup_j2_leds();
|
|
+ atstk1004_setup_extdac();
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+postcore_initcall(atstk1004_init);
|
|
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
|
|
index c9af409..8bedf93 100644
|
|
--- a/arch/avr32/boards/atstk1000/setup.c
|
|
+++ b/arch/avr32/boards/atstk1000/setup.c
|
|
@@ -10,13 +10,17 @@
|
|
#include <linux/bootmem.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
#include <linux/linkage.h>
|
|
|
|
#include <video/atmel_lcdc.h>
|
|
|
|
#include <asm/setup.h>
|
|
+
|
|
+#include <asm/arch/at32ap700x.h>
|
|
#include <asm/arch/board.h>
|
|
+#include <asm/arch/portmux.h>
|
|
|
|
#include "atstk1000.h"
|
|
|
|
@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
|
|
.default_monspecs = &atstk1000_default_monspecs,
|
|
.guard_time = 2,
|
|
};
|
|
+
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
|
|
+#include <linux/leds.h>
|
|
+
|
|
+static struct gpio_led stk1000_j2_led[] = {
|
|
+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
|
|
+#define LEDSTRING "J2 jumpered to LED8"
|
|
+ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
|
|
+ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
|
|
+ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
|
|
+ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
|
|
+ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
|
|
+ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
|
|
+ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
|
|
+ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
|
|
+ .default_trigger = "heartbeat", },
|
|
+#else /* RGB */
|
|
+#define LEDSTRING "J2 jumpered to RGB LEDs"
|
|
+ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
|
|
+ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
|
|
+ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
|
|
+
|
|
+ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
|
|
+ .default_trigger = "heartbeat", },
|
|
+ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
|
|
+ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
|
|
+ .default_trigger = "heartbeat", },
|
|
+ /* PB16, PB30 unused */
|
|
+#endif
|
|
+};
|
|
+
|
|
+static struct gpio_led_platform_data stk1000_j2_led_data = {
|
|
+ .num_leds = ARRAY_SIZE(stk1000_j2_led),
|
|
+ .leds = stk1000_j2_led,
|
|
+};
|
|
+
|
|
+static struct platform_device stk1000_j2_led_dev = {
|
|
+ .name = "leds-gpio",
|
|
+ .id = 2, /* gpio block J2 */
|
|
+ .dev = {
|
|
+ .platform_data = &stk1000_j2_led_data,
|
|
+ },
|
|
+};
|
|
+
|
|
+void __init atstk1000_setup_j2_leds(void)
|
|
+{
|
|
+ unsigned i;
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
|
|
+ at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
|
|
+
|
|
+ printk("STK1000: " LEDSTRING "\n");
|
|
+ platform_device_register(&stk1000_j2_led_dev);
|
|
+}
|
|
+#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
|
|
+void __init atstk1000_setup_j2_leds(void)
|
|
+{
|
|
+
|
|
+}
|
|
+#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
|
|
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
|
|
index b799a68..2ddc6f5 100644
|
|
--- a/arch/avr32/configs/atngw100_defconfig
|
|
+++ b/arch/avr32/configs/atngw100_defconfig
|
|
@@ -1,46 +1,51 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.22-rc5
|
|
-# Sat Jun 23 15:40:05 2007
|
|
+# Linux kernel version: 2.6.24
|
|
+# Tue Feb 5 16:37:27 2008
|
|
#
|
|
CONFIG_AVR32=y
|
|
CONFIG_GENERIC_GPIO=y
|
|
CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
CONFIG_HARDIRQS_SW_RESEND=y
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
CONFIG_GENERIC_TIME=y
|
|
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
|
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
CONFIG_GENERIC_BUG=y
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
-# Code maturity level options
|
|
+# General setup
|
|
#
|
|
CONFIG_EXPERIMENTAL=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
-
|
|
-#
|
|
-# General setup
|
|
-#
|
|
CONFIG_LOCALVERSION=""
|
|
# CONFIG_LOCALVERSION_AUTO is not set
|
|
CONFIG_SWAP=y
|
|
CONFIG_SYSVIPC=y
|
|
-# CONFIG_IPC_NS is not set
|
|
CONFIG_SYSVIPC_SYSCTL=y
|
|
CONFIG_POSIX_MQUEUE=y
|
|
CONFIG_BSD_PROCESS_ACCT=y
|
|
CONFIG_BSD_PROCESS_ACCT_V3=y
|
|
# CONFIG_TASKSTATS is not set
|
|
-# CONFIG_UTS_NS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
# CONFIG_AUDIT is not set
|
|
# CONFIG_IKCONFIG is not set
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
# CONFIG_RELAY is not set
|
|
CONFIG_BLK_DEV_INITRD=y
|
|
@@ -61,35 +66,28 @@ CONFIG_FUTEX=y
|
|
CONFIG_ANON_INODES=y
|
|
CONFIG_EPOLL=y
|
|
CONFIG_SIGNALFD=y
|
|
-CONFIG_TIMERFD=y
|
|
CONFIG_EVENTFD=y
|
|
CONFIG_SHMEM=y
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
-# CONFIG_SLUB_DEBUG is not set
|
|
+CONFIG_SLUB_DEBUG=y
|
|
# CONFIG_SLAB is not set
|
|
CONFIG_SLUB=y
|
|
# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=1
|
|
-
|
|
-#
|
|
-# Loadable module support
|
|
-#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
CONFIG_MODULE_FORCE_UNLOAD=y
|
|
# CONFIG_MODVERSIONS is not set
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
CONFIG_KMOD=y
|
|
-
|
|
-#
|
|
-# Block layer
|
|
-#
|
|
CONFIG_BLOCK=y
|
|
# CONFIG_LBD is not set
|
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
#
|
|
# IO Schedulers
|
|
@@ -111,17 +109,20 @@ CONFIG_SUBARCH_AVR32B=y
|
|
CONFIG_MMU=y
|
|
CONFIG_PERFORMANCE_COUNTERS=y
|
|
CONFIG_PLATFORM_AT32AP=y
|
|
+CONFIG_CPU_AT32AP700X=y
|
|
CONFIG_CPU_AT32AP7000=y
|
|
# CONFIG_BOARD_ATSTK1000 is not set
|
|
CONFIG_BOARD_ATNGW100=y
|
|
+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
|
|
CONFIG_LOADER_U_BOOT=y
|
|
|
|
#
|
|
# Atmel AVR32 AP options
|
|
#
|
|
-# CONFIG_AP7000_32_BIT_SMC is not set
|
|
-CONFIG_AP7000_16_BIT_SMC=y
|
|
-# CONFIG_AP7000_8_BIT_SMC is not set
|
|
+# CONFIG_AP700X_32_BIT_SMC is not set
|
|
+CONFIG_AP700X_16_BIT_SMC=y
|
|
+# CONFIG_AP700X_8_BIT_SMC is not set
|
|
+CONFIG_GPIO_DEV=y
|
|
CONFIG_LOAD_ADDRESS=0x10000000
|
|
CONFIG_ENTRY_ADDRESS=0x90000000
|
|
CONFIG_PHYS_OFFSET=0x10000000
|
|
@@ -141,10 +142,14 @@ CONFIG_FLATMEM_MANUAL=y
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
# CONFIG_RESOURCES_64BIT is not set
|
|
CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
# CONFIG_OWNERSHIP_TRACE is not set
|
|
+# CONFIG_NMI_DEBUGGING is not set
|
|
+CONFIG_DW_DMAC=y
|
|
# CONFIG_HZ_100 is not set
|
|
CONFIG_HZ_250=y
|
|
# CONFIG_HZ_300 is not set
|
|
@@ -153,13 +158,31 @@ CONFIG_HZ=250
|
|
CONFIG_CMDLINE=""
|
|
|
|
#
|
|
-# Bus options
|
|
+# Power management options
|
|
#
|
|
-# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
|
|
#
|
|
-# PCCARD (PCMCIA/CardBus) support
|
|
+# CPU Frequency scaling
|
|
#
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+# CONFIG_CPU_FREQ_STAT is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_AT32AP=y
|
|
+
|
|
+#
|
|
+# Bus options
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
# CONFIG_PCCARD is not set
|
|
|
|
#
|
|
@@ -213,6 +236,7 @@ CONFIG_INET_TUNNEL=y
|
|
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
|
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
|
CONFIG_INET_XFRM_MODE_BEET=y
|
|
+# CONFIG_INET_LRO is not set
|
|
CONFIG_INET_DIAG=y
|
|
CONFIG_INET_TCP_DIAG=y
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
@@ -240,6 +264,7 @@ CONFIG_IPV6_SIT=y
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
CONFIG_NETFILTER=y
|
|
# CONFIG_NETFILTER_DEBUG is not set
|
|
+CONFIG_BRIDGE_NETFILTER=y
|
|
|
|
#
|
|
# Core Netfilter Configuration
|
|
@@ -252,6 +277,7 @@ CONFIG_NF_CONNTRACK_MARK=y
|
|
# CONFIG_NF_CONNTRACK_EVENTS is not set
|
|
CONFIG_NF_CT_PROTO_GRE=m
|
|
# CONFIG_NF_CT_PROTO_SCTP is not set
|
|
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
|
|
CONFIG_NF_CONNTRACK_AMANDA=m
|
|
CONFIG_NF_CONNTRACK_FTP=m
|
|
CONFIG_NF_CONNTRACK_H323=m
|
|
@@ -269,9 +295,11 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
|
|
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
|
|
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
|
|
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
|
|
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
|
|
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
|
|
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
|
|
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
|
|
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
|
|
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
|
|
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
|
|
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
|
|
@@ -284,6 +312,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
|
|
CONFIG_NETFILTER_XT_MATCH_MARK=m
|
|
CONFIG_NETFILTER_XT_MATCH_POLICY=m
|
|
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
|
|
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
|
|
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
|
|
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
|
|
CONFIG_NETFILTER_XT_MATCH_REALM=m
|
|
@@ -292,6 +321,8 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
|
|
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
|
|
CONFIG_NETFILTER_XT_MATCH_STRING=m
|
|
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
|
|
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
|
|
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
|
|
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
|
|
|
|
#
|
|
@@ -359,13 +390,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
|
|
CONFIG_IP6_NF_MANGLE=m
|
|
CONFIG_IP6_NF_TARGET_HL=m
|
|
CONFIG_IP6_NF_RAW=m
|
|
+
|
|
+#
|
|
+# Bridge: Netfilter Configuration
|
|
+#
|
|
+# CONFIG_BRIDGE_NF_EBTABLES is not set
|
|
# CONFIG_IP_DCCP is not set
|
|
# CONFIG_IP_SCTP is not set
|
|
# CONFIG_TIPC is not set
|
|
# CONFIG_ATM is not set
|
|
-# CONFIG_BRIDGE is not set
|
|
+CONFIG_BRIDGE=m
|
|
CONFIG_VLAN_8021Q=m
|
|
# CONFIG_DECNET is not set
|
|
+CONFIG_LLC=m
|
|
# CONFIG_LLC2 is not set
|
|
# CONFIG_IPX is not set
|
|
# CONFIG_ATALK is not set
|
|
@@ -373,10 +410,6 @@ CONFIG_VLAN_8021Q=m
|
|
# CONFIG_LAPB is not set
|
|
# CONFIG_ECONET is not set
|
|
# CONFIG_WAN_ROUTER is not set
|
|
-
|
|
-#
|
|
-# QoS and/or fair queueing
|
|
-#
|
|
# CONFIG_NET_SCHED is not set
|
|
CONFIG_NET_CLS_ROUTE=y
|
|
|
|
@@ -384,6 +417,7 @@ CONFIG_NET_CLS_ROUTE=y
|
|
# Network testing
|
|
#
|
|
# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_NET_TCPPROBE is not set
|
|
# CONFIG_HAMRADIO is not set
|
|
# CONFIG_IRDA is not set
|
|
# CONFIG_BT is not set
|
|
@@ -397,6 +431,7 @@ CONFIG_NET_CLS_ROUTE=y
|
|
# CONFIG_MAC80211 is not set
|
|
# CONFIG_IEEE80211 is not set
|
|
# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
|
|
#
|
|
# Device Drivers
|
|
@@ -405,16 +440,13 @@ CONFIG_NET_CLS_ROUTE=y
|
|
#
|
|
# Generic Driver Options
|
|
#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_STANDALONE=y
|
|
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
|
# CONFIG_FW_LOADER is not set
|
|
# CONFIG_DEBUG_DRIVER is not set
|
|
# CONFIG_DEBUG_DEVRES is not set
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
-
|
|
-#
|
|
-# Connector - unified userspace <-> kernelspace linker
|
|
-#
|
|
# CONFIG_CONNECTOR is not set
|
|
CONFIG_MTD=y
|
|
# CONFIG_MTD_DEBUG is not set
|
|
@@ -434,6 +466,7 @@ CONFIG_MTD_BLOCK=y
|
|
# CONFIG_INFTL is not set
|
|
# CONFIG_RFD_FTL is not set
|
|
# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
|
|
#
|
|
# RAM/ROM/Flash chip drivers
|
|
@@ -493,20 +526,8 @@ CONFIG_MTD_DATAFLASH=y
|
|
# UBI - Unsorted block images
|
|
#
|
|
# CONFIG_MTD_UBI is not set
|
|
-
|
|
-#
|
|
-# Parallel port support
|
|
-#
|
|
# CONFIG_PARPORT is not set
|
|
-
|
|
-#
|
|
-# Plug and Play support
|
|
-#
|
|
-# CONFIG_PNPACPI is not set
|
|
-
|
|
-#
|
|
-# Block devices
|
|
-#
|
|
+CONFIG_BLK_DEV=y
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
CONFIG_BLK_DEV_LOOP=m
|
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
@@ -517,11 +538,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
-
|
|
-#
|
|
-# Misc devices
|
|
-#
|
|
-# CONFIG_BLINK is not set
|
|
+# CONFIG_MISC_DEVICES is not set
|
|
# CONFIG_IDE is not set
|
|
|
|
#
|
|
@@ -529,30 +546,42 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
#
|
|
# CONFIG_RAID_ATTRS is not set
|
|
# CONFIG_SCSI is not set
|
|
+# CONFIG_SCSI_DMA is not set
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
# CONFIG_ATA is not set
|
|
-
|
|
-#
|
|
-# Multi-device support (RAID and LVM)
|
|
-#
|
|
# CONFIG_MD is not set
|
|
-
|
|
-#
|
|
-# Network device support
|
|
-#
|
|
CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
# CONFIG_DUMMY is not set
|
|
# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
# CONFIG_EQUALIZER is not set
|
|
CONFIG_TUN=m
|
|
-# CONFIG_PHYLIB is not set
|
|
-
|
|
-#
|
|
-# Ethernet (10 or 100Mbit)
|
|
-#
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
CONFIG_NET_ETHERNET=y
|
|
-CONFIG_MII=y
|
|
+# CONFIG_MII is not set
|
|
CONFIG_MACB=y
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
# CONFIG_NETDEV_1000 is not set
|
|
# CONFIG_NETDEV_10000 is not set
|
|
|
|
@@ -571,21 +600,14 @@ CONFIG_PPP_DEFLATE=m
|
|
CONFIG_PPP_BSDCOMP=m
|
|
CONFIG_PPP_MPPE=m
|
|
CONFIG_PPPOE=m
|
|
+# CONFIG_PPPOL2TP is not set
|
|
# CONFIG_SLIP is not set
|
|
CONFIG_SLHC=m
|
|
# CONFIG_SHAPER is not set
|
|
# CONFIG_NETCONSOLE is not set
|
|
# CONFIG_NETPOLL is not set
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
-
|
|
-#
|
|
-# ISDN subsystem
|
|
-#
|
|
# CONFIG_ISDN is not set
|
|
-
|
|
-#
|
|
-# Telephony Support
|
|
-#
|
|
# CONFIG_PHONE is not set
|
|
|
|
#
|
|
@@ -615,28 +637,57 @@ CONFIG_SLHC=m
|
|
#
|
|
CONFIG_SERIAL_ATMEL=y
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+CONFIG_SERIAL_ATMEL_PDC=y
|
|
# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
CONFIG_SERIAL_CORE=y
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
CONFIG_UNIX98_PTYS=y
|
|
# CONFIG_LEGACY_PTYS is not set
|
|
-
|
|
-#
|
|
-# IPMI
|
|
-#
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
-# CONFIG_WATCHDOG is not set
|
|
# CONFIG_HW_RANDOM is not set
|
|
# CONFIG_RTC is not set
|
|
# CONFIG_GEN_RTC is not set
|
|
# CONFIG_R3964 is not set
|
|
# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+CONFIG_I2C=m
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=m
|
|
|
|
#
|
|
-# TPM devices
|
|
+# I2C Algorithms
|
|
#
|
|
-# CONFIG_TCG_TPM is not set
|
|
-# CONFIG_I2C is not set
|
|
+CONFIG_I2C_ALGOBIT=m
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+CONFIG_I2C_ATMELTWI=m
|
|
+CONFIG_I2C_GPIO=m
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
|
|
#
|
|
# SPI support
|
|
@@ -655,13 +706,25 @@ CONFIG_SPI_ATMEL=y
|
|
# SPI Protocol Masters
|
|
#
|
|
# CONFIG_SPI_AT25 is not set
|
|
-# CONFIG_SPI_SPIDEV is not set
|
|
+CONFIG_SPI_SPIDEV=m
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
|
|
#
|
|
-# Dallas's 1-wire bus
|
|
+# Watchdog Device Drivers
|
|
#
|
|
-# CONFIG_W1 is not set
|
|
-# CONFIG_HWMON is not set
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT32AP700X_WDT=y
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
|
|
#
|
|
# Multifunction device drivers
|
|
@@ -678,23 +741,21 @@ CONFIG_SPI_ATMEL=y
|
|
#
|
|
# Graphics support
|
|
#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+# CONFIG_FB is not set
|
|
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
|
|
#
|
|
# Display device support
|
|
#
|
|
# CONFIG_DISPLAY_SUPPORT is not set
|
|
-# CONFIG_VGASTATE is not set
|
|
-# CONFIG_FB is not set
|
|
|
|
#
|
|
# Sound
|
|
#
|
|
# CONFIG_SOUND is not set
|
|
-
|
|
-#
|
|
-# USB support
|
|
-#
|
|
+CONFIG_USB_SUPPORT=y
|
|
# CONFIG_USB_ARCH_HAS_HCD is not set
|
|
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
@@ -706,12 +767,48 @@ CONFIG_SPI_ATMEL=y
|
|
#
|
|
# USB Gadget Support
|
|
#
|
|
-# CONFIG_USB_GADGET is not set
|
|
-# CONFIG_MMC is not set
|
|
-
|
|
-#
|
|
-# LED devices
|
|
-#
|
|
+CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+CONFIG_USB_GADGET_ATMEL_USBA=y
|
|
+CONFIG_USB_ATMEL_USBA=y
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+CONFIG_USB_ZERO=m
|
|
+CONFIG_USB_ETH=m
|
|
+CONFIG_USB_ETH_RNDIS=y
|
|
+CONFIG_USB_GADGETFS=m
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+CONFIG_USB_G_SERIAL=m
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+# CONFIG_MMC_BLOCK_BOUNCE is not set
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_ATMELMCI=y
|
|
+CONFIG_MMC_SPI=m
|
|
CONFIG_NEW_LEDS=y
|
|
CONFIG_LEDS_CLASS=y
|
|
|
|
@@ -726,53 +823,71 @@ CONFIG_LEDS_GPIO=y
|
|
CONFIG_LEDS_TRIGGERS=y
|
|
CONFIG_LEDS_TRIGGER_TIMER=y
|
|
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
|
-
|
|
-
|
|
-#
|
|
-# LED drivers
|
|
-#
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
|
|
#
|
|
-# LED Triggers
|
|
-#
|
|
-
|
|
-#
|
|
-# InfiniBand support
|
|
+# RTC interfaces
|
|
#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
|
|
#
|
|
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
|
+# I2C RTC drivers
|
|
#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
|
|
#
|
|
-# Real Time Clock
|
|
+# SPI RTC drivers
|
|
#
|
|
-# CONFIG_RTC_CLASS is not set
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
#
|
|
-# DMA Engine support
|
|
+# Platform RTC drivers
|
|
#
|
|
-# CONFIG_DMA_ENGINE is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
#
|
|
-# DMA Clients
|
|
+# on-CPU RTC drivers
|
|
#
|
|
+CONFIG_RTC_DRV_AT32AP700X=y
|
|
|
|
#
|
|
-# DMA Devices
|
|
+# Userspace I/O
|
|
#
|
|
+# CONFIG_UIO is not set
|
|
|
|
#
|
|
# File systems
|
|
#
|
|
-CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS=m
|
|
# CONFIG_EXT2_FS_XATTR is not set
|
|
# CONFIG_EXT2_FS_XIP is not set
|
|
-CONFIG_EXT3_FS=y
|
|
+CONFIG_EXT3_FS=m
|
|
# CONFIG_EXT3_FS_XATTR is not set
|
|
# CONFIG_EXT4DEV_FS is not set
|
|
-CONFIG_JBD=y
|
|
-# CONFIG_JBD_DEBUG is not set
|
|
+CONFIG_JBD=m
|
|
# CONFIG_REISERFS_FS is not set
|
|
# CONFIG_JFS_FS is not set
|
|
# CONFIG_FS_POSIX_ACL is not set
|
|
@@ -781,7 +896,8 @@ CONFIG_JBD=y
|
|
# CONFIG_OCFS2_FS is not set
|
|
# CONFIG_MINIX_FS is not set
|
|
# CONFIG_ROMFS_FS is not set
|
|
-# CONFIG_INOTIFY is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
# CONFIG_QUOTA is not set
|
|
# CONFIG_DNOTIFY is not set
|
|
# CONFIG_AUTOFS_FS is not set
|
|
@@ -814,7 +930,6 @@ CONFIG_SYSFS=y
|
|
CONFIG_TMPFS=y
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
-CONFIG_RAMFS=y
|
|
CONFIG_CONFIGFS_FS=y
|
|
|
|
#
|
|
@@ -830,10 +945,12 @@ CONFIG_CONFIGFS_FS=y
|
|
CONFIG_JFFS2_FS=y
|
|
CONFIG_JFFS2_FS_DEBUG=0
|
|
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
|
# CONFIG_JFFS2_SUMMARY is not set
|
|
# CONFIG_JFFS2_FS_XATTR is not set
|
|
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
CONFIG_JFFS2_ZLIB=y
|
|
+# CONFIG_JFFS2_LZO is not set
|
|
CONFIG_JFFS2_RTIME=y
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
# CONFIG_CRAMFS is not set
|
|
@@ -842,19 +959,21 @@ CONFIG_JFFS2_RTIME=y
|
|
# CONFIG_QNX4FS_FS is not set
|
|
# CONFIG_SYSV_FS is not set
|
|
# CONFIG_UFS_FS is not set
|
|
-
|
|
-#
|
|
-# Network File Systems
|
|
-#
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
CONFIG_NFS_FS=y
|
|
CONFIG_NFS_V3=y
|
|
# CONFIG_NFS_V3_ACL is not set
|
|
# CONFIG_NFS_V4 is not set
|
|
# CONFIG_NFS_DIRECTIO is not set
|
|
-# CONFIG_NFSD is not set
|
|
+CONFIG_NFSD=m
|
|
+CONFIG_NFSD_V3=y
|
|
+# CONFIG_NFSD_V3_ACL is not set
|
|
+# CONFIG_NFSD_V4 is not set
|
|
+CONFIG_NFSD_TCP=y
|
|
CONFIG_ROOT_NFS=y
|
|
CONFIG_LOCKD=y
|
|
CONFIG_LOCKD_V4=y
|
|
+CONFIG_EXPORTFS=m
|
|
CONFIG_NFS_COMMON=y
|
|
CONFIG_SUNRPC=y
|
|
# CONFIG_SUNRPC_BIND34 is not set
|
|
@@ -871,23 +990,18 @@ CONFIG_CIFS=m
|
|
# CONFIG_NCP_FS is not set
|
|
# CONFIG_CODA_FS is not set
|
|
# CONFIG_AFS_FS is not set
|
|
-# CONFIG_9P_FS is not set
|
|
|
|
#
|
|
# Partition Types
|
|
#
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
CONFIG_MSDOS_PARTITION=y
|
|
-
|
|
-#
|
|
-# Native Language Support
|
|
-#
|
|
-CONFIG_NLS=y
|
|
+CONFIG_NLS=m
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
-# CONFIG_NLS_CODEPAGE_437 is not set
|
|
+CONFIG_NLS_CODEPAGE_437=m
|
|
# CONFIG_NLS_CODEPAGE_737 is not set
|
|
# CONFIG_NLS_CODEPAGE_775 is not set
|
|
-CONFIG_NLS_CODEPAGE_850=y
|
|
+CONFIG_NLS_CODEPAGE_850=m
|
|
# CONFIG_NLS_CODEPAGE_852 is not set
|
|
# CONFIG_NLS_CODEPAGE_855 is not set
|
|
# CONFIG_NLS_CODEPAGE_857 is not set
|
|
@@ -908,7 +1022,7 @@ CONFIG_NLS_CODEPAGE_850=y
|
|
# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
# CONFIG_NLS_ASCII is not set
|
|
-CONFIG_NLS_ISO8859_1=y
|
|
+CONFIG_NLS_ISO8859_1=m
|
|
# CONFIG_NLS_ISO8859_2 is not set
|
|
# CONFIG_NLS_ISO8859_3 is not set
|
|
# CONFIG_NLS_ISO8859_4 is not set
|
|
@@ -921,18 +1035,19 @@ CONFIG_NLS_ISO8859_1=y
|
|
# CONFIG_NLS_ISO8859_15 is not set
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
-CONFIG_NLS_UTF8=y
|
|
-
|
|
-#
|
|
-# Distributed Lock Manager
|
|
-#
|
|
+CONFIG_NLS_UTF8=m
|
|
# CONFIG_DLM is not set
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+CONFIG_PROFILING=y
|
|
+CONFIG_OPROFILE=m
|
|
+CONFIG_KPROBES=y
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
CONFIG_MAGIC_SYSRQ=y
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
@@ -941,12 +1056,17 @@ CONFIG_MAGIC_SYSRQ=y
|
|
CONFIG_DEBUG_KERNEL=y
|
|
# CONFIG_DEBUG_SHIRQ is not set
|
|
CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
# CONFIG_TIMER_STATS is not set
|
|
+# CONFIG_SLUB_DEBUG_ON is not set
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
@@ -954,21 +1074,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
|
|
# CONFIG_DEBUG_INFO is not set
|
|
# CONFIG_DEBUG_VM is not set
|
|
# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
# CONFIG_FORCED_INLINING is not set
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_LKDTM is not set
|
|
# CONFIG_FAULT_INJECTION is not set
|
|
-# CONFIG_KPROBES is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
|
|
#
|
|
# Security options
|
|
#
|
|
# CONFIG_KEYS is not set
|
|
# CONFIG_SECURITY is not set
|
|
-
|
|
-#
|
|
-# Cryptographic options
|
|
-#
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
CONFIG_CRYPTO=y
|
|
CONFIG_CRYPTO_ALGAPI=y
|
|
CONFIG_CRYPTO_BLKCIPHER=y
|
|
@@ -989,6 +1109,7 @@ CONFIG_CRYPTO_ECB=m
|
|
CONFIG_CRYPTO_CBC=y
|
|
CONFIG_CRYPTO_PCBC=m
|
|
# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
# CONFIG_CRYPTO_CRYPTD is not set
|
|
CONFIG_CRYPTO_DES=y
|
|
# CONFIG_CRYPTO_FCRYPT is not set
|
|
@@ -1002,15 +1123,14 @@ CONFIG_CRYPTO_DES=y
|
|
CONFIG_CRYPTO_ARC4=m
|
|
# CONFIG_CRYPTO_KHAZAD is not set
|
|
# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
CONFIG_CRYPTO_DEFLATE=y
|
|
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
# CONFIG_CRYPTO_CRC32C is not set
|
|
# CONFIG_CRYPTO_CAMELLIA is not set
|
|
# CONFIG_CRYPTO_TEST is not set
|
|
-
|
|
-#
|
|
-# Hardware crypto devices
|
|
-#
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+CONFIG_CRYPTO_HW=y
|
|
|
|
#
|
|
# Library routines
|
|
@@ -1018,8 +1138,9 @@ CONFIG_CRYPTO_DEFLATE=y
|
|
CONFIG_BITREVERSE=y
|
|
CONFIG_CRC_CCITT=m
|
|
# CONFIG_CRC16 is not set
|
|
-# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC_ITU_T=m
|
|
CONFIG_CRC32=y
|
|
+CONFIG_CRC7=m
|
|
# CONFIG_LIBCRC32C is not set
|
|
CONFIG_ZLIB_INFLATE=y
|
|
CONFIG_ZLIB_DEFLATE=y
|
|
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
|
|
index 3b977fd..46e1c78 100644
|
|
--- a/arch/avr32/configs/atstk1002_defconfig
|
|
+++ b/arch/avr32/configs/atstk1002_defconfig
|
|
@@ -1,48 +1,48 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.22-rc5
|
|
-# Sat Jun 23 15:32:08 2007
|
|
+# Linux kernel version: 2.6.24
|
|
+# Tue Feb 5 18:00:06 2008
|
|
#
|
|
CONFIG_AVR32=y
|
|
CONFIG_GENERIC_GPIO=y
|
|
CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
CONFIG_HARDIRQS_SW_RESEND=y
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
CONFIG_GENERIC_TIME=y
|
|
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
|
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
CONFIG_GENERIC_BUG=y
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
-# Code maturity level options
|
|
+# General setup
|
|
#
|
|
CONFIG_EXPERIMENTAL=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
-
|
|
-#
|
|
-# General setup
|
|
-#
|
|
CONFIG_LOCALVERSION=""
|
|
# CONFIG_LOCALVERSION_AUTO is not set
|
|
CONFIG_SWAP=y
|
|
CONFIG_SYSVIPC=y
|
|
-# CONFIG_IPC_NS is not set
|
|
CONFIG_SYSVIPC_SYSCTL=y
|
|
CONFIG_POSIX_MQUEUE=y
|
|
-CONFIG_BSD_PROCESS_ACCT=y
|
|
-CONFIG_BSD_PROCESS_ACCT_V3=y
|
|
-CONFIG_TASKSTATS=y
|
|
-CONFIG_TASK_DELAY_ACCT=y
|
|
-# CONFIG_TASK_XACCT is not set
|
|
-# CONFIG_UTS_NS is not set
|
|
-CONFIG_AUDIT=y
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
# CONFIG_IKCONFIG is not set
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+# CONFIG_FAIR_GROUP_SCHED is not set
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
CONFIG_RELAY=y
|
|
CONFIG_BLK_DEV_INITRD=y
|
|
@@ -63,35 +63,28 @@ CONFIG_FUTEX=y
|
|
CONFIG_ANON_INODES=y
|
|
CONFIG_EPOLL=y
|
|
CONFIG_SIGNALFD=y
|
|
-CONFIG_TIMERFD=y
|
|
CONFIG_EVENTFD=y
|
|
CONFIG_SHMEM=y
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
-# CONFIG_SLUB_DEBUG is not set
|
|
+CONFIG_SLUB_DEBUG=y
|
|
# CONFIG_SLAB is not set
|
|
CONFIG_SLUB=y
|
|
# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=1
|
|
-
|
|
-#
|
|
-# Loadable module support
|
|
-#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
# CONFIG_MODVERSIONS is not set
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
# CONFIG_KMOD is not set
|
|
-
|
|
-#
|
|
-# Block layer
|
|
-#
|
|
CONFIG_BLOCK=y
|
|
# CONFIG_LBD is not set
|
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
#
|
|
# IO Schedulers
|
|
@@ -99,12 +92,12 @@ CONFIG_BLOCK=y
|
|
CONFIG_IOSCHED_NOOP=y
|
|
# CONFIG_IOSCHED_AS is not set
|
|
# CONFIG_IOSCHED_DEADLINE is not set
|
|
-# CONFIG_IOSCHED_CFQ is not set
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
# CONFIG_DEFAULT_AS is not set
|
|
# CONFIG_DEFAULT_DEADLINE is not set
|
|
-# CONFIG_DEFAULT_CFQ is not set
|
|
-CONFIG_DEFAULT_NOOP=y
|
|
-CONFIG_DEFAULT_IOSCHED="noop"
|
|
+CONFIG_DEFAULT_CFQ=y
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="cfq"
|
|
|
|
#
|
|
# System Type and features
|
|
@@ -113,18 +106,30 @@ CONFIG_SUBARCH_AVR32B=y
|
|
CONFIG_MMU=y
|
|
CONFIG_PERFORMANCE_COUNTERS=y
|
|
CONFIG_PLATFORM_AT32AP=y
|
|
+CONFIG_CPU_AT32AP700X=y
|
|
CONFIG_CPU_AT32AP7000=y
|
|
-CONFIG_BOARD_ATSTK1002=y
|
|
CONFIG_BOARD_ATSTK1000=y
|
|
# CONFIG_BOARD_ATNGW100 is not set
|
|
+CONFIG_BOARD_ATSTK1002=y
|
|
+# CONFIG_BOARD_ATSTK1003 is not set
|
|
+# CONFIG_BOARD_ATSTK1004 is not set
|
|
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
|
|
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
|
|
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
|
|
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
|
|
CONFIG_LOADER_U_BOOT=y
|
|
|
|
#
|
|
# Atmel AVR32 AP options
|
|
#
|
|
-# CONFIG_AP7000_32_BIT_SMC is not set
|
|
-CONFIG_AP7000_16_BIT_SMC=y
|
|
-# CONFIG_AP7000_8_BIT_SMC is not set
|
|
+# CONFIG_AP700X_32_BIT_SMC is not set
|
|
+CONFIG_AP700X_16_BIT_SMC=y
|
|
+# CONFIG_AP700X_8_BIT_SMC is not set
|
|
+CONFIG_GPIO_DEV=y
|
|
CONFIG_LOAD_ADDRESS=0x10000000
|
|
CONFIG_ENTRY_ADDRESS=0x90000000
|
|
CONFIG_PHYS_OFFSET=0x10000000
|
|
@@ -144,10 +149,14 @@ CONFIG_FLATMEM_MANUAL=y
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
# CONFIG_RESOURCES_64BIT is not set
|
|
CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
# CONFIG_OWNERSHIP_TRACE is not set
|
|
+CONFIG_NMI_DEBUGGING=y
|
|
+CONFIG_DW_DMAC=y
|
|
# CONFIG_HZ_100 is not set
|
|
CONFIG_HZ_250=y
|
|
# CONFIG_HZ_300 is not set
|
|
@@ -156,13 +165,31 @@ CONFIG_HZ=250
|
|
CONFIG_CMDLINE=""
|
|
|
|
#
|
|
-# Bus options
|
|
+# Power management options
|
|
#
|
|
-# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
|
|
#
|
|
-# PCCARD (PCMCIA/CardBus) support
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+# CONFIG_CPU_FREQ_STAT is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_AT32AP=y
|
|
+
|
|
#
|
|
+# Bus options
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
# CONFIG_PCCARD is not set
|
|
|
|
#
|
|
@@ -182,7 +209,12 @@ CONFIG_NET=y
|
|
CONFIG_PACKET=y
|
|
CONFIG_PACKET_MMAP=y
|
|
CONFIG_UNIX=y
|
|
-# CONFIG_NET_KEY is not set
|
|
+CONFIG_XFRM=y
|
|
+CONFIG_XFRM_USER=m
|
|
+# CONFIG_XFRM_SUB_POLICY is not set
|
|
+# CONFIG_XFRM_MIGRATE is not set
|
|
+CONFIG_NET_KEY=m
|
|
+# CONFIG_NET_KEY_MIGRATE is not set
|
|
CONFIG_INET=y
|
|
# CONFIG_IP_MULTICAST is not set
|
|
# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
@@ -191,36 +223,52 @@ CONFIG_IP_PNP=y
|
|
CONFIG_IP_PNP_DHCP=y
|
|
# CONFIG_IP_PNP_BOOTP is not set
|
|
# CONFIG_IP_PNP_RARP is not set
|
|
-# CONFIG_NET_IPIP is not set
|
|
-# CONFIG_NET_IPGRE is not set
|
|
+CONFIG_NET_IPIP=m
|
|
+CONFIG_NET_IPGRE=m
|
|
# CONFIG_ARPD is not set
|
|
# CONFIG_SYN_COOKIES is not set
|
|
-# CONFIG_INET_AH is not set
|
|
-# CONFIG_INET_ESP is not set
|
|
+CONFIG_INET_AH=m
|
|
+CONFIG_INET_ESP=m
|
|
# CONFIG_INET_IPCOMP is not set
|
|
# CONFIG_INET_XFRM_TUNNEL is not set
|
|
-# CONFIG_INET_TUNNEL is not set
|
|
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
-# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+CONFIG_INET_TUNNEL=m
|
|
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
|
|
+CONFIG_INET_XFRM_MODE_TUNNEL=m
|
|
+CONFIG_INET_XFRM_MODE_BEET=m
|
|
+# CONFIG_INET_LRO is not set
|
|
CONFIG_INET_DIAG=y
|
|
CONFIG_INET_TCP_DIAG=y
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
CONFIG_TCP_CONG_CUBIC=y
|
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
# CONFIG_TCP_MD5SIG is not set
|
|
-# CONFIG_IPV6 is not set
|
|
-# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
-# CONFIG_INET6_TUNNEL is not set
|
|
+CONFIG_IPV6=m
|
|
+# CONFIG_IPV6_PRIVACY is not set
|
|
+# CONFIG_IPV6_ROUTER_PREF is not set
|
|
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
|
|
+CONFIG_INET6_AH=m
|
|
+CONFIG_INET6_ESP=m
|
|
+CONFIG_INET6_IPCOMP=m
|
|
+# CONFIG_IPV6_MIP6 is not set
|
|
+CONFIG_INET6_XFRM_TUNNEL=m
|
|
+CONFIG_INET6_TUNNEL=m
|
|
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
|
|
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
|
|
+CONFIG_INET6_XFRM_MODE_BEET=m
|
|
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
|
|
+CONFIG_IPV6_SIT=m
|
|
+CONFIG_IPV6_TUNNEL=m
|
|
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
# CONFIG_NETFILTER is not set
|
|
# CONFIG_IP_DCCP is not set
|
|
# CONFIG_IP_SCTP is not set
|
|
# CONFIG_TIPC is not set
|
|
# CONFIG_ATM is not set
|
|
-# CONFIG_BRIDGE is not set
|
|
+CONFIG_BRIDGE=m
|
|
# CONFIG_VLAN_8021Q is not set
|
|
# CONFIG_DECNET is not set
|
|
+CONFIG_LLC=m
|
|
# CONFIG_LLC2 is not set
|
|
# CONFIG_IPX is not set
|
|
# CONFIG_ATALK is not set
|
|
@@ -228,16 +276,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
# CONFIG_LAPB is not set
|
|
# CONFIG_ECONET is not set
|
|
# CONFIG_WAN_ROUTER is not set
|
|
-
|
|
-#
|
|
-# QoS and/or fair queueing
|
|
-#
|
|
# CONFIG_NET_SCHED is not set
|
|
|
|
#
|
|
# Network testing
|
|
#
|
|
# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_NET_TCPPROBE is not set
|
|
# CONFIG_HAMRADIO is not set
|
|
# CONFIG_IRDA is not set
|
|
# CONFIG_BT is not set
|
|
@@ -251,6 +296,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
# CONFIG_MAC80211 is not set
|
|
# CONFIG_IEEE80211 is not set
|
|
# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
|
|
#
|
|
# Device Drivers
|
|
@@ -259,16 +305,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
#
|
|
# Generic Driver Options
|
|
#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_STANDALONE=y
|
|
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
|
# CONFIG_FW_LOADER is not set
|
|
# CONFIG_DEBUG_DRIVER is not set
|
|
# CONFIG_DEBUG_DEVRES is not set
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
-
|
|
-#
|
|
-# Connector - unified userspace <-> kernelspace linker
|
|
-#
|
|
# CONFIG_CONNECTOR is not set
|
|
CONFIG_MTD=y
|
|
# CONFIG_MTD_DEBUG is not set
|
|
@@ -288,6 +331,7 @@ CONFIG_MTD_BLOCK=y
|
|
# CONFIG_INFTL is not set
|
|
# CONFIG_RFD_FTL is not set
|
|
# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
|
|
#
|
|
# RAM/ROM/Flash chip drivers
|
|
@@ -327,6 +371,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
|
#
|
|
# Self-contained MTD device drivers
|
|
#
|
|
+CONFIG_MTD_DATAFLASH=m
|
|
+CONFIG_MTD_M25P80=m
|
|
# CONFIG_MTD_SLRAM is not set
|
|
# CONFIG_MTD_PHRAM is not set
|
|
# CONFIG_MTD_MTDRAM is not set
|
|
@@ -345,20 +391,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
|
# UBI - Unsorted block images
|
|
#
|
|
# CONFIG_MTD_UBI is not set
|
|
-
|
|
-#
|
|
-# Parallel port support
|
|
-#
|
|
# CONFIG_PARPORT is not set
|
|
-
|
|
-#
|
|
-# Plug and Play support
|
|
-#
|
|
-# CONFIG_PNPACPI is not set
|
|
-
|
|
-#
|
|
-# Block devices
|
|
-#
|
|
+CONFIG_BLK_DEV=y
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
CONFIG_BLK_DEV_LOOP=m
|
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
@@ -369,42 +403,88 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
-
|
|
-#
|
|
-# Misc devices
|
|
-#
|
|
-# CONFIG_BLINK is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+CONFIG_ATMEL_PWM=m
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=m
|
|
# CONFIG_IDE is not set
|
|
|
|
#
|
|
# SCSI device support
|
|
#
|
|
# CONFIG_RAID_ATTRS is not set
|
|
-# CONFIG_SCSI is not set
|
|
+CONFIG_SCSI=m
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
-# CONFIG_ATA is not set
|
|
+# CONFIG_SCSI_PROC_FS is not set
|
|
|
|
#
|
|
-# Multi-device support (RAID and LVM)
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
#
|
|
-# CONFIG_MD is not set
|
|
+CONFIG_BLK_DEV_SD=m
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+CONFIG_BLK_DEV_SR=m
|
|
+# CONFIG_BLK_DEV_SR_VENDOR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
|
|
#
|
|
-# Network device support
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+# CONFIG_SCSI_LOWLEVEL is not set
|
|
+CONFIG_ATA=m
|
|
+# CONFIG_ATA_NONSTANDARD is not set
|
|
+CONFIG_PATA_AT32=m
|
|
+# CONFIG_PATA_PLATFORM is not set
|
|
+# CONFIG_MD is not set
|
|
CONFIG_NETDEVICES=y
|
|
-CONFIG_DUMMY=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
# CONFIG_EQUALIZER is not set
|
|
CONFIG_TUN=m
|
|
-# CONFIG_PHYLIB is not set
|
|
-
|
|
-#
|
|
-# Ethernet (10 or 100Mbit)
|
|
-#
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
CONFIG_NET_ETHERNET=y
|
|
-CONFIG_MII=y
|
|
+# CONFIG_MII is not set
|
|
CONFIG_MACB=y
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
# CONFIG_NETDEV_1000 is not set
|
|
# CONFIG_NETDEV_10000 is not set
|
|
|
|
@@ -423,27 +503,54 @@ CONFIG_PPP_DEFLATE=m
|
|
CONFIG_PPP_BSDCOMP=m
|
|
# CONFIG_PPP_MPPE is not set
|
|
# CONFIG_PPPOE is not set
|
|
+# CONFIG_PPPOL2TP is not set
|
|
# CONFIG_SLIP is not set
|
|
CONFIG_SLHC=m
|
|
# CONFIG_SHAPER is not set
|
|
# CONFIG_NETCONSOLE is not set
|
|
# CONFIG_NETPOLL is not set
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
|
|
#
|
|
-# ISDN subsystem
|
|
+# Input device support
|
|
#
|
|
-# CONFIG_ISDN is not set
|
|
+CONFIG_INPUT=m
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+CONFIG_INPUT_POLLDEV=m
|
|
|
|
#
|
|
-# Telephony Support
|
|
+# Userland interfaces
|
|
#
|
|
-# CONFIG_PHONE is not set
|
|
+CONFIG_INPUT_MOUSEDEV=m
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=m
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
|
|
#
|
|
-# Input device support
|
|
+# Input Device Drivers
|
|
#
|
|
-# CONFIG_INPUT is not set
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+# CONFIG_KEYBOARD_ATKBD is not set
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
+CONFIG_KEYBOARD_GPIO=m
|
|
+CONFIG_INPUT_MOUSE=y
|
|
+# CONFIG_MOUSE_PS2 is not set
|
|
+# CONFIG_MOUSE_SERIAL is not set
|
|
+# CONFIG_MOUSE_VSXXXAA is not set
|
|
+CONFIG_MOUSE_GPIO=m
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
|
|
#
|
|
# Hardware I/O ports
|
|
@@ -467,40 +574,94 @@ CONFIG_SLHC=m
|
|
#
|
|
CONFIG_SERIAL_ATMEL=y
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+CONFIG_SERIAL_ATMEL_PDC=y
|
|
# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
CONFIG_SERIAL_CORE=y
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
CONFIG_UNIX98_PTYS=y
|
|
# CONFIG_LEGACY_PTYS is not set
|
|
-
|
|
-#
|
|
-# IPMI
|
|
-#
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
-# CONFIG_WATCHDOG is not set
|
|
# CONFIG_HW_RANDOM is not set
|
|
# CONFIG_RTC is not set
|
|
# CONFIG_GEN_RTC is not set
|
|
# CONFIG_R3964 is not set
|
|
# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+CONFIG_I2C=m
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=m
|
|
|
|
#
|
|
-# TPM devices
|
|
+# I2C Algorithms
|
|
#
|
|
-# CONFIG_TCG_TPM is not set
|
|
-# CONFIG_I2C is not set
|
|
+CONFIG_I2C_ALGOBIT=m
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+CONFIG_I2C_ATMELTWI=m
|
|
+CONFIG_I2C_GPIO=m
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
|
|
#
|
|
# SPI support
|
|
#
|
|
-# CONFIG_SPI is not set
|
|
-# CONFIG_SPI_MASTER is not set
|
|
+CONFIG_SPI=y
|
|
+# CONFIG_SPI_DEBUG is not set
|
|
+CONFIG_SPI_MASTER=y
|
|
|
|
#
|
|
-# Dallas's 1-wire bus
|
|
+# SPI Master Controller Drivers
|
|
+#
|
|
+CONFIG_SPI_ATMEL=y
|
|
+# CONFIG_SPI_BITBANG is not set
|
|
+
|
|
#
|
|
+# SPI Protocol Masters
|
|
+#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+CONFIG_SPI_SPIDEV=m
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT32AP700X_WDT=y
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
|
|
#
|
|
# Multifunction device drivers
|
|
@@ -517,23 +678,104 @@ CONFIG_UNIX98_PTYS=y
|
|
#
|
|
# Graphics support
|
|
#
|
|
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+CONFIG_FB_ATMEL=y
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
|
+CONFIG_LCD_CLASS_DEVICE=y
|
|
+CONFIG_LCD_LTV350QV=y
|
|
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
|
|
|
|
#
|
|
# Display device support
|
|
#
|
|
# CONFIG_DISPLAY_SUPPORT is not set
|
|
-# CONFIG_VGASTATE is not set
|
|
-# CONFIG_FB is not set
|
|
+# CONFIG_LOGO is not set
|
|
|
|
#
|
|
# Sound
|
|
#
|
|
-# CONFIG_SOUND is not set
|
|
+CONFIG_SOUND=m
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+CONFIG_SND=m
|
|
+CONFIG_SND_TIMER=m
|
|
+CONFIG_SND_PCM=m
|
|
+# CONFIG_SND_SEQUENCER is not set
|
|
+CONFIG_SND_OSSEMUL=y
|
|
+CONFIG_SND_MIXER_OSS=m
|
|
+CONFIG_SND_PCM_OSS=m
|
|
+CONFIG_SND_PCM_OSS_PLUGINS=y
|
|
+# CONFIG_SND_DYNAMIC_MINORS is not set
|
|
+# CONFIG_SND_SUPPORT_OLD_API is not set
|
|
+# CONFIG_SND_VERBOSE_PROCFS is not set
|
|
+# CONFIG_SND_VERBOSE_PRINTK is not set
|
|
+# CONFIG_SND_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Generic devices
|
|
+#
|
|
+CONFIG_SND_AC97_CODEC=m
|
|
+# CONFIG_SND_DUMMY is not set
|
|
+# CONFIG_SND_MTPAV is not set
|
|
+# CONFIG_SND_SERIAL_U16550 is not set
|
|
+# CONFIG_SND_MPU401 is not set
|
|
+
|
|
+#
|
|
+# AVR32 devices
|
|
+#
|
|
+CONFIG_SND_ATMEL_AC97=m
|
|
+
|
|
+#
|
|
+# SPI devices
|
|
+#
|
|
+CONFIG_SND_AT73C213=m
|
|
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
|
|
+
|
|
+#
|
|
+# System on Chip audio support
|
|
+#
|
|
+# CONFIG_SND_SOC is not set
|
|
+
|
|
+#
|
|
+# SoC Audio support for SuperH
|
|
+#
|
|
|
|
#
|
|
-# USB support
|
|
+# Open Sound System
|
|
#
|
|
+CONFIG_SOUND_PRIME=m
|
|
+# CONFIG_SOUND_MSNDCLAS is not set
|
|
+# CONFIG_SOUND_MSNDPIN is not set
|
|
+CONFIG_SOUND_AT32_ABDAC=m
|
|
+CONFIG_AC97_BUS=m
|
|
+# CONFIG_HID_SUPPORT is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
# CONFIG_USB_ARCH_HAS_HCD is not set
|
|
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
@@ -545,63 +787,137 @@ CONFIG_UNIX98_PTYS=y
|
|
#
|
|
# USB Gadget Support
|
|
#
|
|
-# CONFIG_USB_GADGET is not set
|
|
-# CONFIG_MMC is not set
|
|
-
|
|
-#
|
|
-# LED devices
|
|
-#
|
|
-# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FS is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+CONFIG_USB_GADGET_ATMEL_USBA=y
|
|
+CONFIG_USB_ATMEL_USBA=y
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+CONFIG_USB_ZERO=m
|
|
+CONFIG_USB_ETH=m
|
|
+CONFIG_USB_ETH_RNDIS=y
|
|
+CONFIG_USB_GADGETFS=m
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+CONFIG_USB_G_SERIAL=m
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+# CONFIG_MMC_BLOCK_BOUNCE is not set
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_ATMELMCI=y
|
|
+CONFIG_MMC_SPI=m
|
|
+CONFIG_NEW_LEDS=y
|
|
+CONFIG_LEDS_CLASS=m
|
|
|
|
#
|
|
# LED drivers
|
|
#
|
|
+CONFIG_LEDS_ATMEL_PWM=m
|
|
+CONFIG_LEDS_GPIO=m
|
|
|
|
#
|
|
# LED Triggers
|
|
#
|
|
+CONFIG_LEDS_TRIGGERS=y
|
|
+CONFIG_LEDS_TRIGGER_TIMER=m
|
|
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
|
|
#
|
|
-# InfiniBand support
|
|
+# RTC interfaces
|
|
#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
|
|
#
|
|
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
|
+# I2C RTC drivers
|
|
#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
|
|
#
|
|
-# Real Time Clock
|
|
+# SPI RTC drivers
|
|
#
|
|
-# CONFIG_RTC_CLASS is not set
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
#
|
|
-# DMA Engine support
|
|
+# Platform RTC drivers
|
|
#
|
|
-# CONFIG_DMA_ENGINE is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
#
|
|
-# DMA Clients
|
|
+# on-CPU RTC drivers
|
|
#
|
|
+CONFIG_RTC_DRV_AT32AP700X=y
|
|
|
|
#
|
|
-# DMA Devices
|
|
+# Userspace I/O
|
|
#
|
|
+# CONFIG_UIO is not set
|
|
|
|
#
|
|
# File systems
|
|
#
|
|
-CONFIG_EXT2_FS=m
|
|
+CONFIG_EXT2_FS=y
|
|
# CONFIG_EXT2_FS_XATTR is not set
|
|
# CONFIG_EXT2_FS_XIP is not set
|
|
-# CONFIG_EXT3_FS is not set
|
|
+CONFIG_EXT3_FS=y
|
|
+# CONFIG_EXT3_FS_XATTR is not set
|
|
# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_JBD=y
|
|
+# CONFIG_JBD_DEBUG is not set
|
|
# CONFIG_REISERFS_FS is not set
|
|
# CONFIG_JFS_FS is not set
|
|
# CONFIG_FS_POSIX_ACL is not set
|
|
# CONFIG_XFS_FS is not set
|
|
# CONFIG_GFS2_FS is not set
|
|
# CONFIG_OCFS2_FS is not set
|
|
-CONFIG_MINIX_FS=m
|
|
+# CONFIG_MINIX_FS is not set
|
|
# CONFIG_ROMFS_FS is not set
|
|
CONFIG_INOTIFY=y
|
|
CONFIG_INOTIFY_USER=y
|
|
@@ -609,7 +925,7 @@ CONFIG_INOTIFY_USER=y
|
|
# CONFIG_DNOTIFY is not set
|
|
# CONFIG_AUTOFS_FS is not set
|
|
# CONFIG_AUTOFS4_FS is not set
|
|
-# CONFIG_FUSE_FS is not set
|
|
+CONFIG_FUSE_FS=m
|
|
|
|
#
|
|
# CD-ROM/DVD Filesystems
|
|
@@ -637,8 +953,7 @@ CONFIG_SYSFS=y
|
|
CONFIG_TMPFS=y
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
-CONFIG_RAMFS=y
|
|
-CONFIG_CONFIGFS_FS=m
|
|
+CONFIG_CONFIGFS_FS=y
|
|
|
|
#
|
|
# Miscellaneous filesystems
|
|
@@ -652,11 +967,12 @@ CONFIG_CONFIGFS_FS=m
|
|
# CONFIG_EFS_FS is not set
|
|
CONFIG_JFFS2_FS=y
|
|
CONFIG_JFFS2_FS_DEBUG=0
|
|
-CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
|
|
# CONFIG_JFFS2_SUMMARY is not set
|
|
# CONFIG_JFFS2_FS_XATTR is not set
|
|
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
CONFIG_JFFS2_ZLIB=y
|
|
+# CONFIG_JFFS2_LZO is not set
|
|
CONFIG_JFFS2_RTIME=y
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
# CONFIG_CRAMFS is not set
|
|
@@ -665,10 +981,7 @@ CONFIG_JFFS2_RTIME=y
|
|
# CONFIG_QNX4FS_FS is not set
|
|
# CONFIG_SYSV_FS is not set
|
|
# CONFIG_UFS_FS is not set
|
|
-
|
|
-#
|
|
-# Network File Systems
|
|
-#
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
CONFIG_NFS_FS=y
|
|
CONFIG_NFS_V3=y
|
|
# CONFIG_NFS_V3_ACL is not set
|
|
@@ -688,17 +1001,12 @@ CONFIG_SUNRPC=y
|
|
# CONFIG_NCP_FS is not set
|
|
# CONFIG_CODA_FS is not set
|
|
# CONFIG_AFS_FS is not set
|
|
-# CONFIG_9P_FS is not set
|
|
|
|
#
|
|
# Partition Types
|
|
#
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
CONFIG_MSDOS_PARTITION=y
|
|
-
|
|
-#
|
|
-# Native Language Support
|
|
-#
|
|
CONFIG_NLS=m
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
CONFIG_NLS_CODEPAGE_437=m
|
|
@@ -739,17 +1047,18 @@ CONFIG_NLS_ISO8859_1=m
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
CONFIG_NLS_UTF8=m
|
|
-
|
|
-#
|
|
-# Distributed Lock Manager
|
|
-#
|
|
# CONFIG_DLM is not set
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+CONFIG_PROFILING=y
|
|
+CONFIG_OPROFILE=m
|
|
+CONFIG_KPROBES=y
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
CONFIG_MAGIC_SYSRQ=y
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
@@ -758,12 +1067,17 @@ CONFIG_DEBUG_FS=y
|
|
CONFIG_DEBUG_KERNEL=y
|
|
# CONFIG_DEBUG_SHIRQ is not set
|
|
CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
# CONFIG_TIMER_STATS is not set
|
|
+# CONFIG_SLUB_DEBUG_ON is not set
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
@@ -771,22 +1085,63 @@ CONFIG_DEBUG_BUGVERBOSE=y
|
|
# CONFIG_DEBUG_INFO is not set
|
|
# CONFIG_DEBUG_VM is not set
|
|
# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_LKDTM is not set
|
|
# CONFIG_FAULT_INJECTION is not set
|
|
-# CONFIG_KPROBES is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
|
|
#
|
|
# Security options
|
|
#
|
|
# CONFIG_KEYS is not set
|
|
# CONFIG_SECURITY is not set
|
|
-
|
|
-#
|
|
-# Cryptographic options
|
|
-#
|
|
-# CONFIG_CRYPTO is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=m
|
|
+CONFIG_CRYPTO_BLKCIPHER=m
|
|
+CONFIG_CRYPTO_HASH=m
|
|
+CONFIG_CRYPTO_MANAGER=m
|
|
+CONFIG_CRYPTO_HMAC=m
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=m
|
|
+CONFIG_CRYPTO_SHA1=m
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=m
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=m
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+# CONFIG_CRYPTO_HW is not set
|
|
|
|
#
|
|
# Library routines
|
|
@@ -794,10 +1149,10 @@ CONFIG_FORCED_INLINING=y
|
|
CONFIG_BITREVERSE=y
|
|
CONFIG_CRC_CCITT=m
|
|
# CONFIG_CRC16 is not set
|
|
-# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC_ITU_T=m
|
|
CONFIG_CRC32=y
|
|
+CONFIG_CRC7=m
|
|
# CONFIG_LIBCRC32C is not set
|
|
-CONFIG_AUDIT_GENERIC=y
|
|
CONFIG_ZLIB_INFLATE=y
|
|
CONFIG_ZLIB_DEFLATE=y
|
|
CONFIG_PLIST=y
|
|
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
|
|
new file mode 100644
|
|
index 0000000..d8a6595
|
|
--- /dev/null
|
|
+++ b/arch/avr32/configs/atstk1003_defconfig
|
|
@@ -0,0 +1,1032 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24
|
|
+# Tue Feb 5 18:08:36 2008
|
|
+#
|
|
+CONFIG_AVR32=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_BUG=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+# CONFIG_LOCALVERSION_AUTO is not set
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+CONFIG_POSIX_MQUEUE=y
|
|
+CONFIG_BSD_PROCESS_ACCT=y
|
|
+CONFIG_BSD_PROCESS_ACCT_V3=y
|
|
+CONFIG_TASKSTATS=y
|
|
+CONFIG_TASK_DELAY_ACCT=y
|
|
+# CONFIG_TASK_XACCT is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+CONFIG_AUDIT=y
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
+CONFIG_INITRAMFS_SOURCE=""
|
|
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+# CONFIG_SYSCTL_SYSCALL is not set
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_ALL is not set
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+# CONFIG_BASE_FULL is not set
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+# CONFIG_SLUB_DEBUG is not set
|
|
+# CONFIG_SLAB is not set
|
|
+CONFIG_SLUB=y
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=1
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+# CONFIG_MODVERSIONS is not set
|
|
+# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
+# CONFIG_KMOD is not set
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+# CONFIG_IOSCHED_AS is not set
|
|
+# CONFIG_IOSCHED_DEADLINE is not set
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+# CONFIG_DEFAULT_AS is not set
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+CONFIG_DEFAULT_CFQ=y
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="cfq"
|
|
+
|
|
+#
|
|
+# System Type and features
|
|
+#
|
|
+CONFIG_SUBARCH_AVR32B=y
|
|
+CONFIG_MMU=y
|
|
+CONFIG_PERFORMANCE_COUNTERS=y
|
|
+CONFIG_PLATFORM_AT32AP=y
|
|
+CONFIG_CPU_AT32AP700X=y
|
|
+CONFIG_CPU_AT32AP7001=y
|
|
+CONFIG_BOARD_ATSTK1000=y
|
|
+# CONFIG_BOARD_ATNGW100 is not set
|
|
+# CONFIG_BOARD_ATSTK1002 is not set
|
|
+CONFIG_BOARD_ATSTK1003=y
|
|
+# CONFIG_BOARD_ATSTK1004 is not set
|
|
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
|
|
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
|
|
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
|
|
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
|
|
+CONFIG_LOADER_U_BOOT=y
|
|
+
|
|
+#
|
|
+# Atmel AVR32 AP options
|
|
+#
|
|
+# CONFIG_AP700X_32_BIT_SMC is not set
|
|
+CONFIG_AP700X_16_BIT_SMC=y
|
|
+# CONFIG_AP700X_8_BIT_SMC is not set
|
|
+CONFIG_GPIO_DEV=y
|
|
+CONFIG_LOAD_ADDRESS=0x10000000
|
|
+CONFIG_ENTRY_ADDRESS=0x90000000
|
|
+CONFIG_PHYS_OFFSET=0x10000000
|
|
+CONFIG_PREEMPT_NONE=y
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+# CONFIG_PREEMPT is not set
|
|
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
|
|
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
|
|
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_OWNERSHIP_TRACE is not set
|
|
+CONFIG_NMI_DEBUGGING=y
|
|
+CONFIG_DW_DMAC=y
|
|
+# CONFIG_HZ_100 is not set
|
|
+CONFIG_HZ_250=y
|
|
+# CONFIG_HZ_300 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+CONFIG_HZ=250
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+# CONFIG_CPU_FREQ_STAT is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_AT32AP=y
|
|
+
|
|
+#
|
|
+# Bus options
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+CONFIG_PACKET_MMAP=y
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+# CONFIG_IP_PNP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_NET_TCPPROBE is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+CONFIG_MTD_CFI=y
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_GEN_PROBE=y
|
|
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_CFI_INTELEXT is not set
|
|
+CONFIG_MTD_CFI_AMDSTD=y
|
|
+# CONFIG_MTD_CFI_STAA is not set
|
|
+CONFIG_MTD_CFI_UTIL=y
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+CONFIG_MTD_PHYSMAP=y
|
|
+CONFIG_MTD_PHYSMAP_START=0x8000000
|
|
+CONFIG_MTD_PHYSMAP_LEN=0x0
|
|
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+CONFIG_MTD_DATAFLASH=m
|
|
+CONFIG_MTD_M25P80=m
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+# CONFIG_MTD_NAND is not set
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=m
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+CONFIG_BLK_DEV_NBD=m
|
|
+CONFIG_BLK_DEV_RAM=m
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+CONFIG_ATMEL_PWM=m
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=m
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=m
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+# CONFIG_SCSI_PROC_FS is not set
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=m
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+CONFIG_BLK_DEV_SR=m
|
|
+# CONFIG_BLK_DEV_SR_VENDOR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+CONFIG_ATA=m
|
|
+# CONFIG_ATA_NONSTANDARD is not set
|
|
+CONFIG_PATA_AT32=m
|
|
+# CONFIG_PATA_PLATFORM is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+# CONFIG_NET_ETHERNET is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+# CONFIG_WAN is not set
|
|
+CONFIG_PPP=m
|
|
+# CONFIG_PPP_MULTILINK is not set
|
|
+# CONFIG_PPP_FILTER is not set
|
|
+CONFIG_PPP_ASYNC=m
|
|
+# CONFIG_PPP_SYNC_TTY is not set
|
|
+CONFIG_PPP_DEFLATE=m
|
|
+CONFIG_PPP_BSDCOMP=m
|
|
+# CONFIG_PPP_MPPE is not set
|
|
+# CONFIG_PPPOE is not set
|
|
+# CONFIG_PPPOL2TP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+CONFIG_SLHC=m
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=m
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+CONFIG_INPUT_POLLDEV=m
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=m
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_EVDEV is not set
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+# CONFIG_KEYBOARD_ATKBD is not set
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
+CONFIG_KEYBOARD_GPIO=m
|
|
+CONFIG_INPUT_MOUSE=y
|
|
+# CONFIG_MOUSE_PS2 is not set
|
|
+# CONFIG_MOUSE_SERIAL is not set
|
|
+# CONFIG_MOUSE_VSXXXAA is not set
|
|
+CONFIG_MOUSE_GPIO=m
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+# CONFIG_SERIO is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+# CONFIG_VT is not set
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+# CONFIG_SERIAL_8250 is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+CONFIG_SERIAL_ATMEL_PDC=y
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+# CONFIG_LEGACY_PTYS is not set
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_GEN_RTC is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+CONFIG_I2C=m
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=m
|
|
+
|
|
+#
|
|
+# I2C Algorithms
|
|
+#
|
|
+CONFIG_I2C_ALGOBIT=m
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+CONFIG_I2C_ATMELTWI=m
|
|
+CONFIG_I2C_GPIO=m
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+CONFIG_SPI=y
|
|
+# CONFIG_SPI_DEBUG is not set
|
|
+CONFIG_SPI_MASTER=y
|
|
+
|
|
+#
|
|
+# SPI Master Controller Drivers
|
|
+#
|
|
+CONFIG_SPI_ATMEL=y
|
|
+# CONFIG_SPI_BITBANG is not set
|
|
+
|
|
+#
|
|
+# SPI Protocol Masters
|
|
+#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+CONFIG_SPI_SPIDEV=m
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT32AP700X_WDT=y
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+# CONFIG_FB is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+CONFIG_SOUND=m
|
|
+
|
|
+#
|
|
+# Advanced Linux Sound Architecture
|
|
+#
|
|
+CONFIG_SND=m
|
|
+CONFIG_SND_TIMER=m
|
|
+CONFIG_SND_PCM=m
|
|
+# CONFIG_SND_SEQUENCER is not set
|
|
+CONFIG_SND_OSSEMUL=y
|
|
+CONFIG_SND_MIXER_OSS=m
|
|
+CONFIG_SND_PCM_OSS=m
|
|
+CONFIG_SND_PCM_OSS_PLUGINS=y
|
|
+# CONFIG_SND_DYNAMIC_MINORS is not set
|
|
+CONFIG_SND_SUPPORT_OLD_API=y
|
|
+CONFIG_SND_VERBOSE_PROCFS=y
|
|
+# CONFIG_SND_VERBOSE_PRINTK is not set
|
|
+# CONFIG_SND_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Generic devices
|
|
+#
|
|
+CONFIG_SND_AC97_CODEC=m
|
|
+# CONFIG_SND_DUMMY is not set
|
|
+# CONFIG_SND_MTPAV is not set
|
|
+# CONFIG_SND_SERIAL_U16550 is not set
|
|
+# CONFIG_SND_MPU401 is not set
|
|
+
|
|
+#
|
|
+# AVR32 devices
|
|
+#
|
|
+CONFIG_SND_ATMEL_AC97=m
|
|
+
|
|
+#
|
|
+# SPI devices
|
|
+#
|
|
+CONFIG_SND_AT73C213=m
|
|
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
|
|
+
|
|
+#
|
|
+# System on Chip audio support
|
|
+#
|
|
+# CONFIG_SND_SOC is not set
|
|
+
|
|
+#
|
|
+# SoC Audio support for SuperH
|
|
+#
|
|
+
|
|
+#
|
|
+# Open Sound System
|
|
+#
|
|
+# CONFIG_SOUND_PRIME is not set
|
|
+CONFIG_AC97_BUS=m
|
|
+# CONFIG_HID_SUPPORT is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+# CONFIG_USB_ARCH_HAS_HCD is not set
|
|
+# CONFIG_USB_ARCH_HAS_OHCI is not set
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+CONFIG_USB_GADGET_DEBUG_FS=y
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+CONFIG_USB_GADGET_ATMEL_USBA=y
|
|
+CONFIG_USB_ATMEL_USBA=y
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+CONFIG_USB_ZERO=m
|
|
+CONFIG_USB_ETH=m
|
|
+CONFIG_USB_ETH_RNDIS=y
|
|
+CONFIG_USB_GADGETFS=m
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
+CONFIG_USB_G_SERIAL=m
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+# CONFIG_MMC_BLOCK_BOUNCE is not set
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_ATMELMCI=y
|
|
+CONFIG_MMC_SPI=m
|
|
+CONFIG_NEW_LEDS=y
|
|
+CONFIG_LEDS_CLASS=y
|
|
+
|
|
+#
|
|
+# LED drivers
|
|
+#
|
|
+CONFIG_LEDS_ATMEL_PWM=m
|
|
+CONFIG_LEDS_GPIO=y
|
|
+
|
|
+#
|
|
+# LED Triggers
|
|
+#
|
|
+CONFIG_LEDS_TRIGGERS=y
|
|
+CONFIG_LEDS_TRIGGER_TIMER=y
|
|
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
+
|
|
+#
|
|
+# RTC interfaces
|
|
+#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
+
|
|
+#
|
|
+# I2C RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT32AP700X=y
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+CONFIG_UIO=m
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=m
|
|
+# CONFIG_EXT2_FS_XATTR is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+CONFIG_EXT3_FS=m
|
|
+# CONFIG_EXT3_FS_XATTR is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_JBD=m
|
|
+# CONFIG_JBD_DEBUG is not set
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+# CONFIG_FS_POSIX_ACL is not set
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+# CONFIG_MINIX_FS is not set
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+# CONFIG_DNOTIFY is not set
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+CONFIG_FUSE_FS=m
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=m
|
|
+CONFIG_MSDOS_FS=m
|
|
+CONFIG_VFAT_FS=m
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+CONFIG_CONFIGFS_FS=y
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+CONFIG_JFFS2_FS=y
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
|
+CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
+# CONFIG_JFFS2_LZO is not set
|
|
+CONFIG_JFFS2_RTIME=y
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+# CONFIG_NETWORK_FILESYSTEMS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+# CONFIG_PARTITION_ADVANCED is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+CONFIG_NLS=m
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=m
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+# CONFIG_NLS_CODEPAGE_936 is not set
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+# CONFIG_NLS_ASCII is not set
|
|
+CONFIG_NLS_ISO8859_1=m
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+CONFIG_NLS_UTF8=m
|
|
+# CONFIG_DLM is not set
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+CONFIG_PROFILING=y
|
|
+CONFIG_OPROFILE=m
|
|
+CONFIG_KPROBES=y
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+CONFIG_DEBUG_KERNEL=y
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
+CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
+# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
+# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
+# CONFIG_RT_MUTEX_TESTER is not set
|
|
+# CONFIG_DEBUG_SPINLOCK is not set
|
|
+# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
+# CONFIG_DEBUG_KOBJECT is not set
|
|
+CONFIG_DEBUG_BUGVERBOSE=y
|
|
+# CONFIG_DEBUG_INFO is not set
|
|
+# CONFIG_DEBUG_VM is not set
|
|
+# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
+CONFIG_FRAME_POINTER=y
|
|
+CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
+# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_LKDTM is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+# CONFIG_CRYPTO is not set
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+CONFIG_CRC_CCITT=m
|
|
+# CONFIG_CRC16 is not set
|
|
+CONFIG_CRC_ITU_T=m
|
|
+CONFIG_CRC32=y
|
|
+CONFIG_CRC7=m
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_AUDIT_GENERIC=y
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
|
|
new file mode 100644
|
|
index 0000000..559b065
|
|
--- /dev/null
|
|
+++ b/arch/avr32/configs/atstk1004_defconfig
|
|
@@ -0,0 +1,627 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24
|
|
+# Tue Feb 5 18:13:33 2008
|
|
+#
|
|
+CONFIG_AVR32=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_GENERIC_BUG=y
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+# CONFIG_LOCALVERSION_AUTO is not set
|
|
+# CONFIG_SYSVIPC is not set
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+# CONFIG_FAIR_GROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+# CONFIG_RELAY is not set
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+# CONFIG_SYSCTL_SYSCALL is not set
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+# CONFIG_BASE_FULL is not set
|
|
+# CONFIG_FUTEX is not set
|
|
+# CONFIG_EPOLL is not set
|
|
+# CONFIG_SIGNALFD is not set
|
|
+# CONFIG_EVENTFD is not set
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+# CONFIG_SLAB is not set
|
|
+# CONFIG_SLUB is not set
|
|
+CONFIG_SLOB=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=1
|
|
+# CONFIG_MODULES is not set
|
|
+# CONFIG_BLOCK is not set
|
|
+
|
|
+#
|
|
+# System Type and features
|
|
+#
|
|
+CONFIG_SUBARCH_AVR32B=y
|
|
+CONFIG_MMU=y
|
|
+CONFIG_PERFORMANCE_COUNTERS=y
|
|
+CONFIG_PLATFORM_AT32AP=y
|
|
+CONFIG_CPU_AT32AP700X=y
|
|
+CONFIG_CPU_AT32AP7002=y
|
|
+CONFIG_BOARD_ATSTK1000=y
|
|
+# CONFIG_BOARD_ATNGW100 is not set
|
|
+# CONFIG_BOARD_ATSTK1002 is not set
|
|
+# CONFIG_BOARD_ATSTK1003 is not set
|
|
+CONFIG_BOARD_ATSTK1004=y
|
|
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
|
|
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
|
|
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
|
|
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
|
|
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
|
|
+CONFIG_LOADER_U_BOOT=y
|
|
+
|
|
+#
|
|
+# Atmel AVR32 AP options
|
|
+#
|
|
+# CONFIG_AP700X_32_BIT_SMC is not set
|
|
+CONFIG_AP700X_16_BIT_SMC=y
|
|
+# CONFIG_AP700X_8_BIT_SMC is not set
|
|
+# CONFIG_GPIO_DEV is not set
|
|
+CONFIG_LOAD_ADDRESS=0x10000000
|
|
+CONFIG_ENTRY_ADDRESS=0x90000000
|
|
+CONFIG_PHYS_OFFSET=0x10000000
|
|
+CONFIG_PREEMPT_NONE=y
|
|
+# CONFIG_PREEMPT_VOLUNTARY is not set
|
|
+# CONFIG_PREEMPT is not set
|
|
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
|
|
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
|
|
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
|
|
+CONFIG_ARCH_FLATMEM_ENABLE=y
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=0
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_OWNERSHIP_TRACE is not set
|
|
+# CONFIG_NMI_DEBUGGING is not set
|
|
+# CONFIG_DW_DMAC is not set
|
|
+# CONFIG_HZ_100 is not set
|
|
+CONFIG_HZ_250=y
|
|
+# CONFIG_HZ_300 is not set
|
|
+# CONFIG_HZ_1000 is not set
|
|
+CONFIG_HZ=250
|
|
+CONFIG_CMDLINE=""
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+
|
|
+#
|
|
+# CPU Frequency scaling
|
|
+#
|
|
+CONFIG_CPU_FREQ=y
|
|
+CONFIG_CPU_FREQ_TABLE=y
|
|
+# CONFIG_CPU_FREQ_DEBUG is not set
|
|
+# CONFIG_CPU_FREQ_STAT is not set
|
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
|
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
|
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
|
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
|
+CONFIG_CPU_FREQ_AT32AP=y
|
|
+
|
|
+#
|
|
+# Bus options
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Executable file formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+CONFIG_PACKET_MMAP=y
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+# CONFIG_IP_PNP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+CONFIG_MTD_CFI=y
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_GEN_PROBE=y
|
|
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_CFI_INTELEXT is not set
|
|
+CONFIG_MTD_CFI_AMDSTD=y
|
|
+# CONFIG_MTD_CFI_STAA is not set
|
|
+CONFIG_MTD_CFI_UTIL=y
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+CONFIG_MTD_PHYSMAP=y
|
|
+CONFIG_MTD_PHYSMAP_START=0x8000000
|
|
+CONFIG_MTD_PHYSMAP_LEN=0x0
|
|
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_DATAFLASH is not set
|
|
+# CONFIG_MTD_M25P80 is not set
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+# CONFIG_MTD_NAND is not set
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+# CONFIG_MISC_DEVICES is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_SCSI_DMA is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+# CONFIG_NETDEVICES is not set
|
|
+# CONFIG_ISDN is not set
|
|
+# CONFIG_PHONE is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+# CONFIG_INPUT is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+# CONFIG_SERIO is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+# CONFIG_VT is not set
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+# CONFIG_SERIAL_8250 is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+# CONFIG_SERIAL_ATMEL_PDC is not set
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+# CONFIG_LEGACY_PTYS is not set
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_RTC is not set
|
|
+# CONFIG_GEN_RTC is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+CONFIG_SPI=y
|
|
+CONFIG_SPI_MASTER=y
|
|
+
|
|
+#
|
|
+# SPI Master Controller Drivers
|
|
+#
|
|
+CONFIG_SPI_ATMEL=y
|
|
+# CONFIG_SPI_BITBANG is not set
|
|
+
|
|
+#
|
|
+# SPI Protocol Masters
|
|
+#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+# CONFIG_SPI_SPIDEV is not set
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+# CONFIG_WATCHDOG_NOWAYOUT is not set
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT32AP700X_WDT=y
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+CONFIG_FB_ATMEL=y
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
|
+CONFIG_LCD_CLASS_DEVICE=y
|
|
+CONFIG_LCD_LTV350QV=y
|
|
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+# CONFIG_LOGO is not set
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+# CONFIG_USB_ARCH_HAS_HCD is not set
|
|
+# CONFIG_USB_ARCH_HAS_OHCI is not set
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+CONFIG_USB_GADGET_ATMEL_USBA=y
|
|
+CONFIG_USB_ATMEL_USBA=y
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+# CONFIG_USB_GADGET_AT91 is not set
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+CONFIG_USB_GADGET_DUALSPEED=y
|
|
+# CONFIG_USB_ZERO is not set
|
|
+CONFIG_USB_ETH=y
|
|
+# CONFIG_USB_ETH_RNDIS is not set
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+# CONFIG_USB_FILE_STORAGE is not set
|
|
+# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+# CONFIG_MMC is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
+
|
|
+#
|
|
+# RTC interfaces
|
|
+#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+# CONFIG_RTC_INTF_PROC is not set
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT32AP700X=y
|
|
+
|
|
+#
|
|
+# Userspace I/O
|
|
+#
|
|
+# CONFIG_UIO is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+# CONFIG_INOTIFY is not set
|
|
+# CONFIG_QUOTA is not set
|
|
+# CONFIG_DNOTIFY is not set
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_KCORE=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+CONFIG_JFFS2_FS=y
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
|
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
+# CONFIG_JFFS2_LZO is not set
|
|
+CONFIG_JFFS2_RTIME=y
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
+# CONFIG_NETWORK_FILESYSTEMS is not set
|
|
+# CONFIG_NLS is not set
|
|
+# CONFIG_DLM is not set
|
|
+# CONFIG_INSTRUMENTATION is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+# CONFIG_DEBUG_BUGVERBOSE is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+# CONFIG_CRYPTO is not set
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
|
|
new file mode 100644
|
|
index 0000000..b429b75
|
|
--- /dev/null
|
|
+++ b/arch/avr32/drivers/Makefile
|
|
@@ -0,0 +1 @@
|
|
+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
|
|
diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
|
|
new file mode 100644
|
|
index 0000000..224eb30
|
|
--- /dev/null
|
|
+++ b/arch/avr32/drivers/dw-dmac.c
|
|
@@ -0,0 +1,761 @@
|
|
+/*
|
|
+ * Driver for the Synopsys DesignWare DMA Controller
|
|
+ *
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/clk.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/dmapool.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <asm/dma-controller.h>
|
|
+#include <asm/io.h>
|
|
+
|
|
+#include "dw-dmac.h"
|
|
+
|
|
+#define DMAC_NR_CHANNELS 3
|
|
+#define DMAC_MAX_BLOCKSIZE 4095
|
|
+
|
|
+enum {
|
|
+ CH_STATE_FREE = 0,
|
|
+ CH_STATE_ALLOCATED,
|
|
+ CH_STATE_BUSY,
|
|
+};
|
|
+
|
|
+struct dw_dma_lli {
|
|
+ dma_addr_t sar;
|
|
+ dma_addr_t dar;
|
|
+ dma_addr_t llp;
|
|
+ u32 ctllo;
|
|
+ u32 ctlhi;
|
|
+ u32 sstat;
|
|
+ u32 dstat;
|
|
+};
|
|
+
|
|
+struct dw_dma_block {
|
|
+ struct dw_dma_lli *lli_vaddr;
|
|
+ dma_addr_t lli_dma_addr;
|
|
+};
|
|
+
|
|
+struct dw_dma_channel {
|
|
+ unsigned int state;
|
|
+ int is_cyclic;
|
|
+ struct dma_request_sg *req_sg;
|
|
+ struct dma_request_cyclic *req_cyclic;
|
|
+ unsigned int nr_blocks;
|
|
+ int direction;
|
|
+ struct dw_dma_block *block;
|
|
+};
|
|
+
|
|
+struct dw_dma_controller {
|
|
+ spinlock_t lock;
|
|
+ void * __iomem regs;
|
|
+ struct dma_pool *lli_pool;
|
|
+ struct clk *hclk;
|
|
+ struct dma_controller dma;
|
|
+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
|
|
+};
|
|
+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
|
|
+
|
|
+#define dmac_writel_hi(dmac, reg, value) \
|
|
+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
|
|
+#define dmac_readl_hi(dmac, reg) \
|
|
+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
|
|
+#define dmac_writel_lo(dmac, reg, value) \
|
|
+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
|
|
+#define dmac_readl_lo(dmac, reg) \
|
|
+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
|
|
+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
|
|
+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
|
|
+ + DW_DMAC_CHAN_##reg + 4))
|
|
+#define dmac_chan_readl_hi(dmac, chan, reg) \
|
|
+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
|
|
+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
|
|
+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
|
|
+#define dmac_chan_readl_lo(dmac, chan, reg) \
|
|
+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
|
|
+#define set_channel_bit(dmac, reg, chan) \
|
|
+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
|
|
+#define clear_channel_bit(dmac, reg, chan) \
|
|
+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
|
|
+
|
|
+static int dmac_alloc_channel(struct dma_controller *_dmac)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
+ struct dw_dma_channel *chan;
|
|
+ unsigned long flags;
|
|
+ int i;
|
|
+
|
|
+ spin_lock_irqsave(&dmac->lock, flags);
|
|
+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
|
|
+ if (dmac->channel[i].state == CH_STATE_FREE)
|
|
+ break;
|
|
+
|
|
+ if (i < DMAC_NR_CHANNELS) {
|
|
+ chan = &dmac->channel[i];
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
|
+ } else {
|
|
+ i = -EBUSY;
|
|
+ }
|
|
+
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
|
+
|
|
+ return i;
|
|
+}
|
|
+
|
|
+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
+
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS
|
|
+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
|
|
+
|
|
+ dmac->channel[channel].state = CH_STATE_FREE;
|
|
+}
|
|
+
|
|
+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
|
|
+ unsigned int nr_blocks)
|
|
+{
|
|
+ struct dw_dma_block *block;
|
|
+ void *p;
|
|
+ unsigned int i;
|
|
+
|
|
+ block = kmalloc(nr_blocks * sizeof(*block),
|
|
+ GFP_KERNEL);
|
|
+ if (unlikely(!block))
|
|
+ return NULL;
|
|
+
|
|
+ for (i = 0; i < nr_blocks; i++) {
|
|
+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
|
|
+ &block[i].lli_dma_addr);
|
|
+ block[i].lli_vaddr = p;
|
|
+ if (unlikely(!p))
|
|
+ goto fail;
|
|
+ }
|
|
+
|
|
+ return block;
|
|
+
|
|
+fail:
|
|
+ for (i = 0; i < nr_blocks; i++) {
|
|
+ if (!block[i].lli_vaddr)
|
|
+ break;
|
|
+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
|
|
+ block[i].lli_dma_addr);
|
|
+ }
|
|
+ kfree(block);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+static void cleanup_channel(struct dw_dma_controller *dmac,
|
|
+ struct dw_dma_channel *chan)
|
|
+{
|
|
+ unsigned int i;
|
|
+
|
|
+ if (chan->nr_blocks > 1) {
|
|
+ for (i = 0; i < chan->nr_blocks; i++)
|
|
+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
|
|
+ chan->block[i].lli_dma_addr);
|
|
+ kfree(chan->block);
|
|
+ }
|
|
+
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
|
+}
|
|
+
|
|
+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
|
|
+ struct dma_request_sg *req)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
+ struct dw_dma_channel *chan;
|
|
+ unsigned long ctlhi, ctllo, cfghi, cfglo;
|
|
+ unsigned long block_size;
|
|
+ unsigned int nr_blocks;
|
|
+ int ret, i, direction;
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&dmac->lock, flags);
|
|
+
|
|
+ ret = -EINVAL;
|
|
+ if (req->req.channel >= DMAC_NR_CHANNELS
|
|
+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
|
|
+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ chan = &dmac->channel[req->req.channel];
|
|
+ chan->state = CH_STATE_BUSY;
|
|
+ chan->req_sg = req;
|
|
+ chan->is_cyclic = 0;
|
|
+
|
|
+ /*
|
|
+ * We have marked the channel as busy, so no need to keep the
|
|
+ * lock as long as we only touch the channel-specific
|
|
+ * registers
|
|
+ */
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
|
+
|
|
+ /*
|
|
+ * There may be limitations in the driver and/or the DMA
|
|
+ * controller that prevents us from sending a whole
|
|
+ * scatterlist item in one go. Taking this into account,
|
|
+ * calculate the number of block transfers we need to set up.
|
|
+ *
|
|
+ * FIXME: Let the peripheral driver know about the maximum
|
|
+ * block size we support. We really don't want to use a
|
|
+ * different block size than what was suggested by the
|
|
+ * peripheral.
|
|
+ *
|
|
+ * Each block will get its own Linked List Item (LLI) below.
|
|
+ */
|
|
+ block_size = req->block_size;
|
|
+ nr_blocks = req->nr_blocks;
|
|
+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
|
|
+ block_size, nr_blocks, req->nr_sg);
|
|
+
|
|
+ BUG_ON(nr_blocks == 0);
|
|
+ chan->nr_blocks = nr_blocks;
|
|
+
|
|
+ ret = -EINVAL;
|
|
+ cfglo = cfghi = 0;
|
|
+ switch (req->direction) {
|
|
+ case DMA_DIR_MEM_TO_PERIPH:
|
|
+ direction = DMA_TO_DEVICE;
|
|
+ cfghi = req->periph_id << (43 - 32);
|
|
+ break;
|
|
+
|
|
+ case DMA_DIR_PERIPH_TO_MEM:
|
|
+ direction = DMA_FROM_DEVICE;
|
|
+ cfghi = req->periph_id << (39 - 32);
|
|
+ break;
|
|
+ default:
|
|
+ goto out_unclaim_channel;
|
|
+ }
|
|
+
|
|
+ chan->direction = direction;
|
|
+
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
|
|
+
|
|
+ ctlhi = block_size >> req->width;
|
|
+ ctllo = ((req->direction << 20)
|
|
+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
|
|
+ | (req->width << 4) | (req->width << 1)
|
|
+ | (1 << 0)); // interrupt enable
|
|
+
|
|
+ if (nr_blocks == 1) {
|
|
+ /* Only one block: No need to use block chaining */
|
|
+ if (direction == DMA_TO_DEVICE) {
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
|
|
+ req->sg->dma_address);
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
|
|
+ req->data_reg);
|
|
+ ctllo |= 2 << 7; // no dst increment
|
|
+ } else {
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
|
|
+ req->data_reg);
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
|
|
+ req->sg->dma_address);
|
|
+ ctllo |= 2 << 9; // no src increment
|
|
+ }
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
|
|
+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
|
|
+ } else {
|
|
+ struct dw_dma_lli *lli, *lli_prev = NULL;
|
|
+ int j = 0, offset = 0;
|
|
+
|
|
+ ret = -ENOMEM;
|
|
+ chan->block = allocate_blocks(dmac, nr_blocks);
|
|
+ if (!chan->block)
|
|
+ goto out_unclaim_channel;
|
|
+
|
|
+ if (direction == DMA_TO_DEVICE)
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
|
|
+ else
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
|
|
+
|
|
+ /*
|
|
+ * Map scatterlist items to blocks. One scatterlist
|
|
+ * item may need more than one block for the reasons
|
|
+ * mentioned above.
|
|
+ */
|
|
+ for (i = 0; i < nr_blocks; i++) {
|
|
+ lli = chan->block[i].lli_vaddr;
|
|
+ if (lli_prev) {
|
|
+ lli_prev->llp = chan->block[i].lli_dma_addr;
|
|
+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
+ chan->block[i - 1].lli_dma_addr,
|
|
+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
|
|
+ lli_prev->ctllo, lli_prev->ctlhi);
|
|
+ }
|
|
+ lli->llp = 0;
|
|
+ lli->ctllo = ctllo;
|
|
+ lli->ctlhi = ctlhi;
|
|
+ if (direction == DMA_TO_DEVICE) {
|
|
+ lli->sar = req->sg[j].dma_address + offset;
|
|
+ lli->dar = req->data_reg;
|
|
+ } else {
|
|
+ lli->sar = req->data_reg;
|
|
+ lli->dar = req->sg[j].dma_address + offset;
|
|
+ }
|
|
+ lli_prev = lli;
|
|
+
|
|
+ offset += block_size;
|
|
+ if (offset > req->sg[j].length) {
|
|
+ j++;
|
|
+ offset = 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
|
|
+ lli_prev->dar, lli_prev->llp,
|
|
+ lli_prev->ctllo, lli_prev->ctlhi);
|
|
+
|
|
+ /*
|
|
+ * SAR, DAR and CTL are initialized from the LLI. We
|
|
+ * only have to enable the LLI bits in CTL.
|
|
+ */
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
|
|
+ chan->block[0].lli_dma_addr);
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
|
|
+ }
|
|
+
|
|
+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
|
|
+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
|
|
+ if (req->req.block_complete)
|
|
+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
|
+ else
|
|
+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_unclaim_channel:
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
|
|
+ struct dma_request_cyclic *req)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
+ struct dw_dma_channel *chan;
|
|
+ unsigned long ctlhi, ctllo, cfghi, cfglo;
|
|
+ unsigned long block_size;
|
|
+ int ret, i, direction;
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&dmac->lock, flags);
|
|
+
|
|
+ block_size = (req->buffer_size/req->periods) >> req->width;
|
|
+
|
|
+ ret = -EINVAL;
|
|
+ if (req->req.channel >= DMAC_NR_CHANNELS
|
|
+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
|
|
+ || (req->periods == 0)
|
|
+ || block_size > DMAC_MAX_BLOCKSIZE) {
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ chan = &dmac->channel[req->req.channel];
|
|
+ chan->state = CH_STATE_BUSY;
|
|
+ chan->is_cyclic = 1;
|
|
+ chan->req_cyclic = req;
|
|
+
|
|
+ /*
|
|
+ * We have marked the channel as busy, so no need to keep the
|
|
+ * lock as long as we only touch the channel-specific
|
|
+ * registers
|
|
+ */
|
|
+ spin_unlock_irqrestore(&dmac->lock, flags);
|
|
+
|
|
+ /*
|
|
+ Setup
|
|
+ */
|
|
+ BUG_ON(req->buffer_size % req->periods);
|
|
+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
|
|
+
|
|
+ chan->nr_blocks = req->periods;
|
|
+
|
|
+ ret = -EINVAL;
|
|
+ cfglo = cfghi = 0;
|
|
+ switch (req->direction) {
|
|
+ case DMA_DIR_MEM_TO_PERIPH:
|
|
+ direction = DMA_TO_DEVICE;
|
|
+ cfghi = req->periph_id << (43 - 32);
|
|
+ break;
|
|
+
|
|
+ case DMA_DIR_PERIPH_TO_MEM:
|
|
+ direction = DMA_FROM_DEVICE;
|
|
+ cfghi = req->periph_id << (39 - 32);
|
|
+ break;
|
|
+ default:
|
|
+ goto out_unclaim_channel;
|
|
+ }
|
|
+
|
|
+ chan->direction = direction;
|
|
+
|
|
+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
|
|
+
|
|
+ ctlhi = block_size;
|
|
+ ctllo = ((req->direction << 20)
|
|
+ | (req->width << 4) | (req->width << 1)
|
|
+ | (1 << 0)); // interrupt enable
|
|
+
|
|
+ {
|
|
+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
|
|
+
|
|
+ ret = -ENOMEM;
|
|
+ chan->block = allocate_blocks(dmac, req->periods);
|
|
+ if (!chan->block)
|
|
+ goto out_unclaim_channel;
|
|
+
|
|
+ if (direction == DMA_TO_DEVICE)
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
|
|
+ else
|
|
+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
|
|
+
|
|
+ /*
|
|
+ * Set up a linked list items where each period gets
|
|
+ * an item. The linked list item for the last period
|
|
+ * points back to the star of the buffer making a
|
|
+ * cyclic buffer.
|
|
+ */
|
|
+ for (i = 0; i < req->periods; i++) {
|
|
+ lli = chan->block[i].lli_vaddr;
|
|
+ if (lli_prev) {
|
|
+ lli_prev->llp = chan->block[i].lli_dma_addr;
|
|
+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
+ chan->block[i - 1].lli_dma_addr,
|
|
+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
|
|
+ lli_prev->ctllo, lli_prev->ctlhi);*/
|
|
+ }
|
|
+ lli->llp = 0;
|
|
+ lli->ctllo = ctllo;
|
|
+ lli->ctlhi = ctlhi;
|
|
+ if (direction == DMA_TO_DEVICE) {
|
|
+ lli->sar = req->buffer_start + i*(block_size << req->width);
|
|
+ lli->dar = req->data_reg;
|
|
+ } else {
|
|
+ lli->sar = req->data_reg;
|
|
+ lli->dar = req->buffer_start + i*(block_size << req->width);
|
|
+ }
|
|
+ lli_prev = lli;
|
|
+ }
|
|
+ lli->llp = chan->block[0].lli_dma_addr;
|
|
+
|
|
+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
|
|
+ i - 1, chan->block[i - 1].lli_vaddr,
|
|
+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
|
|
+ lli_prev->dar, lli_prev->llp,
|
|
+ lli_prev->ctllo, lli_prev->ctlhi); */
|
|
+
|
|
+ /*
|
|
+ * SAR, DAR and CTL are initialized from the LLI. We
|
|
+ * only have to enable the LLI bits in CTL.
|
|
+ */
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
|
|
+ chan->block[0].lli_dma_addr);
|
|
+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
|
|
+ }
|
|
+
|
|
+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
|
|
+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
|
|
+ if (req->req.block_complete)
|
|
+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
|
+ else
|
|
+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_unclaim_channel:
|
|
+ chan->state = CH_STATE_ALLOCATED;
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int dmac_start_request(struct dma_controller *_dmac,
|
|
+ unsigned int channel)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
+
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS);
|
|
+
|
|
+ set_channel_bit(dmac, CH_EN, channel);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
|
|
+ unsigned int channel)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
+ struct dw_dma_channel *chan;
|
|
+ dma_addr_t current_pos;
|
|
+
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS);
|
|
+
|
|
+ chan = &dmac->channel[channel];
|
|
+
|
|
+ switch (chan->direction) {
|
|
+ case DMA_TO_DEVICE:
|
|
+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
|
|
+ break;
|
|
+ case DMA_FROM_DEVICE:
|
|
+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
|
|
+ break;
|
|
+ default:
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+
|
|
+ if (!current_pos) {
|
|
+ if (chan->is_cyclic) {
|
|
+ current_pos = chan->req_cyclic->buffer_start;
|
|
+ } else {
|
|
+ current_pos = chan->req_sg->sg->dma_address;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return current_pos;
|
|
+}
|
|
+
|
|
+
|
|
+static int dmac_stop_request(struct dma_controller *_dmac,
|
|
+ unsigned int channel)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
|
|
+ struct dw_dma_channel *chan;
|
|
+
|
|
+ BUG_ON(channel >= DMAC_NR_CHANNELS);
|
|
+
|
|
+ chan = &dmac->channel[channel];
|
|
+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
|
|
+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
|
|
+ dmac_chan_readl_lo(dmac, channel, DAR),
|
|
+ dmac_chan_readl_lo(dmac, channel, LLP),
|
|
+ dmac_chan_readl_hi(dmac, channel, CTL),
|
|
+ dmac_chan_readl_lo(dmac, channel, CTL));
|
|
+
|
|
+ if (chan->state == CH_STATE_BUSY) {
|
|
+ clear_channel_bit(dmac, CH_EN, channel);
|
|
+ cleanup_channel(dmac, &dmac->channel[channel]);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+static void dmac_block_complete(struct dw_dma_controller *dmac)
|
|
+{
|
|
+ struct dw_dma_channel *chan;
|
|
+ unsigned long status, chanid;
|
|
+
|
|
+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
|
|
+
|
|
+ while (status) {
|
|
+ struct dma_request *req;
|
|
+ chanid = __ffs(status);
|
|
+ chan = &dmac->channel[chanid];
|
|
+
|
|
+ if (chan->is_cyclic) {
|
|
+ BUG_ON(!chan->req_cyclic
|
|
+ || !chan->req_cyclic->req.block_complete);
|
|
+ req = &chan->req_cyclic->req;
|
|
+ } else {
|
|
+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
|
|
+ req = &chan->req_sg->req;
|
|
+ }
|
|
+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
|
|
+ req->block_complete(req);
|
|
+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
|
|
+{
|
|
+ struct dw_dma_channel *chan;
|
|
+ struct dma_request *req;
|
|
+ unsigned long status, chanid;
|
|
+
|
|
+ status = dmac_readl_lo(dmac, STATUS_XFER);
|
|
+
|
|
+ while (status) {
|
|
+ chanid = __ffs(status);
|
|
+ chan = &dmac->channel[chanid];
|
|
+
|
|
+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
|
|
+
|
|
+ req = &chan->req_sg->req;
|
|
+ BUG_ON(!req);
|
|
+ cleanup_channel(dmac, chan);
|
|
+ if (req->xfer_complete)
|
|
+ req->xfer_complete(req);
|
|
+
|
|
+ status = dmac_readl_lo(dmac, STATUS_XFER);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void dmac_error(struct dw_dma_controller *dmac)
|
|
+{
|
|
+ struct dw_dma_channel *chan;
|
|
+ unsigned long status, chanid;
|
|
+
|
|
+ status = dmac_readl_lo(dmac, STATUS_ERROR);
|
|
+
|
|
+ while (status) {
|
|
+ struct dma_request *req;
|
|
+
|
|
+ chanid = __ffs(status);
|
|
+ chan = &dmac->channel[chanid];
|
|
+
|
|
+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
|
|
+ clear_channel_bit(dmac, CH_EN, chanid);
|
|
+
|
|
+ if (chan->is_cyclic) {
|
|
+ BUG_ON(!chan->req_cyclic);
|
|
+ req = &chan->req_cyclic->req;
|
|
+ } else {
|
|
+ BUG_ON(!chan->req_sg);
|
|
+ req = &chan->req_sg->req;
|
|
+ }
|
|
+
|
|
+ cleanup_channel(dmac, chan);
|
|
+ if (req->error)
|
|
+ req->error(req);
|
|
+
|
|
+ status = dmac_readl_lo(dmac, STATUS_XFER);
|
|
+ }
|
|
+}
|
|
+
|
|
+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct dw_dma_controller *dmac = dev_id;
|
|
+ unsigned long status;
|
|
+ int ret = IRQ_NONE;
|
|
+
|
|
+ spin_lock(&dmac->lock);
|
|
+
|
|
+ status = dmac_readl_lo(dmac, STATUS_INT);
|
|
+
|
|
+ while (status) {
|
|
+ ret = IRQ_HANDLED;
|
|
+ if (status & 0x10)
|
|
+ dmac_error(dmac);
|
|
+ if (status & 0x02)
|
|
+ dmac_block_complete(dmac);
|
|
+ if (status & 0x01)
|
|
+ dmac_xfer_complete(dmac);
|
|
+
|
|
+ status = dmac_readl_lo(dmac, STATUS_INT);
|
|
+ }
|
|
+
|
|
+ spin_unlock(&dmac->lock);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __devinit dmac_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct dw_dma_controller *dmac;
|
|
+ struct resource *regs;
|
|
+ int ret;
|
|
+
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!regs)
|
|
+ return -ENXIO;
|
|
+
|
|
+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
|
|
+ if (!dmac)
|
|
+ return -ENOMEM;
|
|
+ memset(dmac, 0, sizeof(*dmac));
|
|
+
|
|
+ dmac->hclk = clk_get(&pdev->dev, "hclk");
|
|
+ if (IS_ERR(dmac->hclk)) {
|
|
+ ret = PTR_ERR(dmac->hclk);
|
|
+ goto out_free_dmac;
|
|
+ }
|
|
+ clk_enable(dmac->hclk);
|
|
+
|
|
+ ret = -ENOMEM;
|
|
+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
|
|
+ sizeof(struct dw_dma_lli), 4, 0);
|
|
+ if (!dmac->lli_pool)
|
|
+ goto out_disable_clk;
|
|
+
|
|
+ spin_lock_init(&dmac->lock);
|
|
+ dmac->dma.dev = &pdev->dev;
|
|
+ dmac->dma.alloc_channel = dmac_alloc_channel;
|
|
+ dmac->dma.release_channel = dmac_release_channel;
|
|
+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
|
|
+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
|
|
+ dmac->dma.start_request = dmac_start_request;
|
|
+ dmac->dma.stop_request = dmac_stop_request;
|
|
+ dmac->dma.get_current_pos = dmac_get_current_pos;
|
|
+
|
|
+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
+ if (!dmac->regs)
|
|
+ goto out_free_pool;
|
|
+
|
|
+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
|
|
+ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
|
|
+ if (ret)
|
|
+ goto out_unmap_regs;
|
|
+
|
|
+ /* Enable the DMA controller */
|
|
+ dmac_writel_lo(dmac, CFG, 1);
|
|
+
|
|
+ register_dma_controller(&dmac->dma);
|
|
+
|
|
+ printk(KERN_INFO
|
|
+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
|
|
+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_unmap_regs:
|
|
+ iounmap(dmac->regs);
|
|
+out_free_pool:
|
|
+ dma_pool_destroy(dmac->lli_pool);
|
|
+out_disable_clk:
|
|
+ clk_disable(dmac->hclk);
|
|
+ clk_put(dmac->hclk);
|
|
+out_free_dmac:
|
|
+ kfree(dmac);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static struct platform_driver dmac_driver = {
|
|
+ .probe = dmac_probe,
|
|
+ .driver = {
|
|
+ .name = "dmaca",
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init dmac_init(void)
|
|
+{
|
|
+ return platform_driver_register(&dmac_driver);
|
|
+}
|
|
+subsys_initcall(dmac_init);
|
|
+
|
|
+static void __exit dmac_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&dmac_driver);
|
|
+}
|
|
+module_exit(dmac_exit);
|
|
+
|
|
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
|
|
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
|
|
+MODULE_LICENSE("GPL");
|
|
diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
|
|
new file mode 100644
|
|
index 0000000..1f67921
|
|
--- /dev/null
|
|
+++ b/arch/avr32/drivers/dw-dmac.h
|
|
@@ -0,0 +1,42 @@
|
|
+/*
|
|
+ * Driver for the Synopsys DesignWare DMA Controller
|
|
+ *
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#ifndef __AVR32_DW_DMAC_H__
|
|
+#define __AVR32_DW_DMAC_H__
|
|
+
|
|
+#define DW_DMAC_CFG 0x398
|
|
+#define DW_DMAC_CH_EN 0x3a0
|
|
+
|
|
+#define DW_DMAC_STATUS_XFER 0x2e8
|
|
+#define DW_DMAC_STATUS_BLOCK 0x2f0
|
|
+#define DW_DMAC_STATUS_ERROR 0x308
|
|
+
|
|
+#define DW_DMAC_MASK_XFER 0x310
|
|
+#define DW_DMAC_MASK_BLOCK 0x318
|
|
+#define DW_DMAC_MASK_ERROR 0x330
|
|
+
|
|
+#define DW_DMAC_CLEAR_XFER 0x338
|
|
+#define DW_DMAC_CLEAR_BLOCK 0x340
|
|
+#define DW_DMAC_CLEAR_ERROR 0x358
|
|
+
|
|
+#define DW_DMAC_STATUS_INT 0x360
|
|
+
|
|
+#define DW_DMAC_CHAN_SAR 0x000
|
|
+#define DW_DMAC_CHAN_DAR 0x008
|
|
+#define DW_DMAC_CHAN_LLP 0x010
|
|
+#define DW_DMAC_CHAN_CTL 0x018
|
|
+#define DW_DMAC_CHAN_SSTAT 0x020
|
|
+#define DW_DMAC_CHAN_DSTAT 0x028
|
|
+#define DW_DMAC_CHAN_SSTATAR 0x030
|
|
+#define DW_DMAC_CHAN_DSTATAR 0x038
|
|
+#define DW_DMAC_CHAN_CFG 0x040
|
|
+#define DW_DMAC_CHAN_SGR 0x048
|
|
+#define DW_DMAC_CHAN_DSR 0x050
|
|
+
|
|
+#endif /* __AVR32_DW_DMAC_H__ */
|
|
diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
|
|
index 2d6d48f..88226b6 100644
|
|
--- a/arch/avr32/kernel/Makefile
|
|
+++ b/arch/avr32/kernel/Makefile
|
|
@@ -6,9 +6,11 @@ extra-y := head.o vmlinux.lds
|
|
|
|
obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o
|
|
obj-y += syscall_table.o syscall-stubs.o irq.o
|
|
-obj-y += setup.o traps.o semaphore.o ptrace.o
|
|
+obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
|
|
obj-y += signal.o sys_avr32.o process.o time.o
|
|
obj-y += init_task.o switch_to.o cpu.o
|
|
+obj-y += dma-controller.o
|
|
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
|
+obj-$(CONFIG_NMI_DEBUGGING) += nmi_debug.o
|
|
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
|
|
index 2714cf6..b8409ca 100644
|
|
--- a/arch/avr32/kernel/cpu.c
|
|
+++ b/arch/avr32/kernel/cpu.c
|
|
@@ -13,6 +13,7 @@
|
|
#include <linux/percpu.h>
|
|
#include <linux/param.h>
|
|
#include <linux/errno.h>
|
|
+#include <linux/clk.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/sysreg.h>
|
|
@@ -187,9 +188,20 @@ static int __init topology_init(void)
|
|
|
|
subsys_initcall(topology_init);
|
|
|
|
+struct chip_id_map {
|
|
+ u16 mid;
|
|
+ u16 pn;
|
|
+ const char *name;
|
|
+};
|
|
+
|
|
+static const struct chip_id_map chip_names[] = {
|
|
+ { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
|
|
+};
|
|
+#define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
|
|
+
|
|
static const char *cpu_names[] = {
|
|
"Morgan",
|
|
- "AP7000",
|
|
+ "AP7",
|
|
};
|
|
#define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
|
|
|
|
@@ -206,12 +218,32 @@ static const char *mmu_types[] = {
|
|
"MPU"
|
|
};
|
|
|
|
+static const char *cpu_feature_flags[] = {
|
|
+ "rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu",
|
|
+};
|
|
+
|
|
+static const char *get_chip_name(struct avr32_cpuinfo *cpu)
|
|
+{
|
|
+ unsigned int i;
|
|
+ unsigned int mid = avr32_get_manufacturer_id(cpu);
|
|
+ unsigned int pn = avr32_get_product_number(cpu);
|
|
+
|
|
+ for (i = 0; i < NR_CHIP_NAMES; i++) {
|
|
+ if (chip_names[i].mid == mid && chip_names[i].pn == pn)
|
|
+ return chip_names[i].name;
|
|
+ }
|
|
+
|
|
+ return "(unknown)";
|
|
+}
|
|
+
|
|
void __init setup_processor(void)
|
|
{
|
|
unsigned long config0, config1;
|
|
unsigned long features;
|
|
unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
|
|
+ unsigned device_id;
|
|
unsigned tmp;
|
|
+ unsigned i;
|
|
|
|
config0 = sysreg_read(CONFIG0);
|
|
config1 = sysreg_read(CONFIG1);
|
|
@@ -221,11 +253,14 @@ void __init setup_processor(void)
|
|
arch_rev = SYSREG_BFEXT(AR, config0);
|
|
mmu_type = SYSREG_BFEXT(MMUT, config0);
|
|
|
|
+ device_id = ocd_read(DID);
|
|
+
|
|
boot_cpu_data.arch_type = arch_id;
|
|
boot_cpu_data.cpu_type = cpu_id;
|
|
boot_cpu_data.arch_revision = arch_rev;
|
|
boot_cpu_data.cpu_revision = cpu_rev;
|
|
boot_cpu_data.tlb_config = mmu_type;
|
|
+ boot_cpu_data.device_id = device_id;
|
|
|
|
tmp = SYSREG_BFEXT(ILSZ, config1);
|
|
if (tmp) {
|
|
@@ -247,41 +282,34 @@ void __init setup_processor(void)
|
|
return;
|
|
}
|
|
|
|
- printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
|
|
+ printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data),
|
|
+ avr32_get_chip_revision(&boot_cpu_data) + 'A');
|
|
+ printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n",
|
|
cpu_names[cpu_id], cpu_id, cpu_rev,
|
|
arch_names[arch_id], arch_rev);
|
|
printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
|
|
|
|
printk ("CPU: features:");
|
|
features = 0;
|
|
- if (config0 & SYSREG_BIT(CONFIG0_R)) {
|
|
+ if (config0 & SYSREG_BIT(CONFIG0_R))
|
|
features |= AVR32_FEATURE_RMW;
|
|
- printk(" rmw");
|
|
- }
|
|
- if (config0 & SYSREG_BIT(CONFIG0_D)) {
|
|
+ if (config0 & SYSREG_BIT(CONFIG0_D))
|
|
features |= AVR32_FEATURE_DSP;
|
|
- printk(" dsp");
|
|
- }
|
|
- if (config0 & SYSREG_BIT(CONFIG0_S)) {
|
|
+ if (config0 & SYSREG_BIT(CONFIG0_S))
|
|
features |= AVR32_FEATURE_SIMD;
|
|
- printk(" simd");
|
|
- }
|
|
- if (config0 & SYSREG_BIT(CONFIG0_O)) {
|
|
+ if (config0 & SYSREG_BIT(CONFIG0_O))
|
|
features |= AVR32_FEATURE_OCD;
|
|
- printk(" ocd");
|
|
- }
|
|
- if (config0 & SYSREG_BIT(CONFIG0_P)) {
|
|
+ if (config0 & SYSREG_BIT(CONFIG0_P))
|
|
features |= AVR32_FEATURE_PCTR;
|
|
- printk(" perfctr");
|
|
- }
|
|
- if (config0 & SYSREG_BIT(CONFIG0_J)) {
|
|
+ if (config0 & SYSREG_BIT(CONFIG0_J))
|
|
features |= AVR32_FEATURE_JAVA;
|
|
- printk(" java");
|
|
- }
|
|
- if (config0 & SYSREG_BIT(CONFIG0_F)) {
|
|
+ if (config0 & SYSREG_BIT(CONFIG0_F))
|
|
features |= AVR32_FEATURE_FPU;
|
|
- printk(" fpu");
|
|
- }
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
|
|
+ if (features & (1 << i))
|
|
+ printk(" %s", cpu_feature_flags[i]);
|
|
+
|
|
printk("\n");
|
|
boot_cpu_data.features = features;
|
|
}
|
|
@@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, void *v)
|
|
{
|
|
unsigned int icache_size, dcache_size;
|
|
unsigned int cpu = smp_processor_id();
|
|
+ unsigned int freq;
|
|
+ unsigned int i;
|
|
|
|
icache_size = boot_cpu_data.icache.ways *
|
|
boot_cpu_data.icache.sets *
|
|
@@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, void *v)
|
|
|
|
seq_printf(m, "processor\t: %d\n", cpu);
|
|
|
|
+ seq_printf(m, "chip type\t: %s revision %c\n",
|
|
+ get_chip_name(&boot_cpu_data),
|
|
+ avr32_get_chip_revision(&boot_cpu_data) + 'A');
|
|
if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
|
|
- seq_printf(m, "cpu family\t: %s revision %d\n",
|
|
+ seq_printf(m, "cpu arch\t: %s revision %d\n",
|
|
arch_names[boot_cpu_data.arch_type],
|
|
boot_cpu_data.arch_revision);
|
|
if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
|
|
- seq_printf(m, "cpu type\t: %s revision %d\n",
|
|
+ seq_printf(m, "cpu core\t: %s revision %d\n",
|
|
cpu_names[boot_cpu_data.cpu_type],
|
|
boot_cpu_data.cpu_revision);
|
|
|
|
+ freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000;
|
|
+ seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000);
|
|
+
|
|
seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
|
|
icache_size >> 10,
|
|
boot_cpu_data.icache.ways,
|
|
@@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, void *v)
|
|
boot_cpu_data.dcache.ways,
|
|
boot_cpu_data.dcache.sets,
|
|
boot_cpu_data.dcache.linesz);
|
|
- seq_printf(m, "bogomips\t: %lu.%02lu\n",
|
|
+
|
|
+ seq_printf(m, "features\t:");
|
|
+ for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
|
|
+ if (boot_cpu_data.features & (1 << i))
|
|
+ seq_printf(m, " %s", cpu_feature_flags[i]);
|
|
+
|
|
+ seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
|
|
boot_cpu_data.loops_per_jiffy / (500000/HZ),
|
|
(boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
|
|
|
|
@@ -343,7 +385,7 @@ static void c_stop(struct seq_file *m, void *v)
|
|
|
|
}
|
|
|
|
-struct seq_operations cpuinfo_op = {
|
|
+const struct seq_operations cpuinfo_op = {
|
|
.start = c_start,
|
|
.next = c_next,
|
|
.stop = c_stop,
|
|
diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
|
|
new file mode 100644
|
|
index 0000000..fb654b3
|
|
--- /dev/null
|
|
+++ b/arch/avr32/kernel/dma-controller.c
|
|
@@ -0,0 +1,34 @@
|
|
+/*
|
|
+ * Preliminary DMA controller framework for AVR32
|
|
+ *
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <asm/dma-controller.h>
|
|
+
|
|
+static LIST_HEAD(controllers);
|
|
+
|
|
+int register_dma_controller(struct dma_controller *dmac)
|
|
+{
|
|
+ static int next_id;
|
|
+
|
|
+ dmac->id = next_id++;
|
|
+ list_add_tail(&dmac->list, &controllers);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+EXPORT_SYMBOL(register_dma_controller);
|
|
+
|
|
+struct dma_controller *find_dma_controller(int id)
|
|
+{
|
|
+ struct dma_controller *dmac;
|
|
+
|
|
+ list_for_each_entry(dmac, &controllers, list)
|
|
+ if (dmac->id == id)
|
|
+ return dmac;
|
|
+ return NULL;
|
|
+}
|
|
+EXPORT_SYMBOL(find_dma_controller);
|
|
diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c
|
|
index 61f2de2..a8e767d 100644
|
|
--- a/arch/avr32/kernel/irq.c
|
|
+++ b/arch/avr32/kernel/irq.c
|
|
@@ -25,6 +25,17 @@ void ack_bad_irq(unsigned int irq)
|
|
printk("unexpected IRQ %u\n", irq);
|
|
}
|
|
|
|
+/* May be overridden by platform code */
|
|
+int __weak nmi_enable(void)
|
|
+{
|
|
+ return -ENOSYS;
|
|
+}
|
|
+
|
|
+void __weak nmi_disable(void)
|
|
+{
|
|
+
|
|
+}
|
|
+
|
|
#ifdef CONFIG_PROC_FS
|
|
int show_interrupts(struct seq_file *p, void *v)
|
|
{
|
|
diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c
|
|
index 799ba89..f820e9f 100644
|
|
--- a/arch/avr32/kernel/kprobes.c
|
|
+++ b/arch/avr32/kernel/kprobes.c
|
|
@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
|
|
void __kprobes arch_arm_kprobe(struct kprobe *p)
|
|
{
|
|
pr_debug("arming kprobe at %p\n", p->addr);
|
|
+ ocd_enable(NULL);
|
|
*p->addr = BREAKPOINT_INSTRUCTION;
|
|
flush_icache_range((unsigned long)p->addr,
|
|
(unsigned long)p->addr + sizeof(kprobe_opcode_t));
|
|
@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
|
|
void __kprobes arch_disarm_kprobe(struct kprobe *p)
|
|
{
|
|
pr_debug("disarming kprobe at %p\n", p->addr);
|
|
+ ocd_disable(NULL);
|
|
*p->addr = p->opcode;
|
|
flush_icache_range((unsigned long)p->addr,
|
|
(unsigned long)p->addr + sizeof(kprobe_opcode_t));
|
|
@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
|
|
|
|
int __init arch_init_kprobes(void)
|
|
{
|
|
- printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
|
|
- ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
|
|
-
|
|
/* TODO: Register kretprobe trampoline */
|
|
return 0;
|
|
}
|
|
diff --git a/arch/avr32/kernel/nmi_debug.c b/arch/avr32/kernel/nmi_debug.c
|
|
new file mode 100644
|
|
index 0000000..3414b85
|
|
--- /dev/null
|
|
+++ b/arch/avr32/kernel/nmi_debug.c
|
|
@@ -0,0 +1,82 @@
|
|
+/*
|
|
+ * Copyright (C) 2007 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/delay.h>
|
|
+#include <linux/kdebug.h>
|
|
+#include <linux/notifier.h>
|
|
+#include <linux/sched.h>
|
|
+
|
|
+#include <asm/irq.h>
|
|
+
|
|
+enum nmi_action {
|
|
+ NMI_SHOW_STATE = 1 << 0,
|
|
+ NMI_SHOW_REGS = 1 << 1,
|
|
+ NMI_DIE = 1 << 2,
|
|
+ NMI_DEBOUNCE = 1 << 3,
|
|
+};
|
|
+
|
|
+static unsigned long nmi_actions;
|
|
+
|
|
+static int nmi_debug_notify(struct notifier_block *self,
|
|
+ unsigned long val, void *data)
|
|
+{
|
|
+ struct die_args *args = data;
|
|
+
|
|
+ if (likely(val != DIE_NMI))
|
|
+ return NOTIFY_DONE;
|
|
+
|
|
+ if (nmi_actions & NMI_SHOW_STATE)
|
|
+ show_state();
|
|
+ if (nmi_actions & NMI_SHOW_REGS)
|
|
+ show_regs(args->regs);
|
|
+ if (nmi_actions & NMI_DEBOUNCE)
|
|
+ mdelay(10);
|
|
+ if (nmi_actions & NMI_DIE)
|
|
+ return NOTIFY_BAD;
|
|
+
|
|
+ return NOTIFY_OK;
|
|
+}
|
|
+
|
|
+static struct notifier_block nmi_debug_nb = {
|
|
+ .notifier_call = nmi_debug_notify,
|
|
+};
|
|
+
|
|
+static int __init nmi_debug_setup(char *str)
|
|
+{
|
|
+ char *p, *sep;
|
|
+
|
|
+ register_die_notifier(&nmi_debug_nb);
|
|
+ if (nmi_enable()) {
|
|
+ printk(KERN_WARNING "Unable to enable NMI.\n");
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ if (*str != '=')
|
|
+ return 0;
|
|
+
|
|
+ for (p = str + 1; *p; p = sep + 1) {
|
|
+ sep = strchr(p, ',');
|
|
+ if (sep)
|
|
+ *sep = 0;
|
|
+ if (strcmp(p, "state") == 0)
|
|
+ nmi_actions |= NMI_SHOW_STATE;
|
|
+ else if (strcmp(p, "regs") == 0)
|
|
+ nmi_actions |= NMI_SHOW_REGS;
|
|
+ else if (strcmp(p, "debounce") == 0)
|
|
+ nmi_actions |= NMI_DEBOUNCE;
|
|
+ else if (strcmp(p, "die") == 0)
|
|
+ nmi_actions |= NMI_DIE;
|
|
+ else
|
|
+ printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
|
|
+ p);
|
|
+ if (!sep)
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+__setup("nmi_debug", nmi_debug_setup);
|
|
diff --git a/arch/avr32/kernel/ocd.c b/arch/avr32/kernel/ocd.c
|
|
new file mode 100644
|
|
index 0000000..c4f0232
|
|
--- /dev/null
|
|
+++ b/arch/avr32/kernel/ocd.c
|
|
@@ -0,0 +1,163 @@
|
|
+/*
|
|
+ * Copyright (C) 2007 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/init.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/spinlock.h>
|
|
+
|
|
+#include <asm/ocd.h>
|
|
+
|
|
+static long ocd_count;
|
|
+static spinlock_t ocd_lock;
|
|
+
|
|
+/**
|
|
+ * ocd_enable - enable on-chip debugging
|
|
+ * @child: task to be debugged
|
|
+ *
|
|
+ * If @child is non-NULL, ocd_enable() first checks if debugging has
|
|
+ * already been enabled for @child, and if it has, does nothing.
|
|
+ *
|
|
+ * If @child is NULL (e.g. when debugging the kernel), or debugging
|
|
+ * has not already been enabled for it, ocd_enable() increments the
|
|
+ * reference count and enables the debugging hardware.
|
|
+ */
|
|
+void ocd_enable(struct task_struct *child)
|
|
+{
|
|
+ u32 dc;
|
|
+
|
|
+ if (child)
|
|
+ pr_debug("ocd_enable: child=%s [%u]\n",
|
|
+ child->comm, child->pid);
|
|
+ else
|
|
+ pr_debug("ocd_enable (no child)\n");
|
|
+
|
|
+ if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
|
|
+ spin_lock(&ocd_lock);
|
|
+ ocd_count++;
|
|
+ dc = ocd_read(DC);
|
|
+ dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
|
|
+ ocd_write(DC, dc);
|
|
+ spin_unlock(&ocd_lock);
|
|
+ }
|
|
+}
|
|
+
|
|
+/**
|
|
+ * ocd_disable - disable on-chip debugging
|
|
+ * @child: task that was being debugged, but isn't anymore
|
|
+ *
|
|
+ * If @child is non-NULL, ocd_disable() checks if debugging is enabled
|
|
+ * for @child, and if it isn't, does nothing.
|
|
+ *
|
|
+ * If @child is NULL (e.g. when debugging the kernel), or debugging is
|
|
+ * enabled, ocd_disable() decrements the reference count, and if it
|
|
+ * reaches zero, disables the debugging hardware.
|
|
+ */
|
|
+void ocd_disable(struct task_struct *child)
|
|
+{
|
|
+ u32 dc;
|
|
+
|
|
+ if (!child)
|
|
+ pr_debug("ocd_disable (no child)\n");
|
|
+ else if (test_tsk_thread_flag(child, TIF_DEBUG))
|
|
+ pr_debug("ocd_disable: child=%s [%u]\n",
|
|
+ child->comm, child->pid);
|
|
+
|
|
+ if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
|
|
+ spin_lock(&ocd_lock);
|
|
+ ocd_count--;
|
|
+
|
|
+ WARN_ON(ocd_count < 0);
|
|
+
|
|
+ if (ocd_count <= 0) {
|
|
+ dc = ocd_read(DC);
|
|
+ dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
|
|
+ ocd_write(DC, dc);
|
|
+ }
|
|
+ spin_unlock(&ocd_lock);
|
|
+ }
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_DEBUG_FS
|
|
+#include <linux/debugfs.h>
|
|
+#include <linux/module.h>
|
|
+
|
|
+static struct dentry *ocd_debugfs_root;
|
|
+static struct dentry *ocd_debugfs_DC;
|
|
+static struct dentry *ocd_debugfs_DS;
|
|
+static struct dentry *ocd_debugfs_count;
|
|
+
|
|
+static u64 ocd_DC_get(void *data)
|
|
+{
|
|
+ return ocd_read(DC);
|
|
+}
|
|
+static void ocd_DC_set(void *data, u64 val)
|
|
+{
|
|
+ ocd_write(DC, val);
|
|
+}
|
|
+DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
|
|
+
|
|
+static u64 ocd_DS_get(void *data)
|
|
+{
|
|
+ return ocd_read(DS);
|
|
+}
|
|
+DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
|
|
+
|
|
+static u64 ocd_count_get(void *data)
|
|
+{
|
|
+ return ocd_count;
|
|
+}
|
|
+DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
|
|
+
|
|
+static void ocd_debugfs_init(void)
|
|
+{
|
|
+ struct dentry *root;
|
|
+
|
|
+ root = debugfs_create_dir("ocd", NULL);
|
|
+ if (IS_ERR(root) || !root)
|
|
+ goto err_root;
|
|
+ ocd_debugfs_root = root;
|
|
+
|
|
+ ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
|
|
+ root, NULL, &fops_DC);
|
|
+ if (!ocd_debugfs_DC)
|
|
+ goto err_DC;
|
|
+
|
|
+ ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
|
|
+ NULL, &fops_DS);
|
|
+ if (!ocd_debugfs_DS)
|
|
+ goto err_DS;
|
|
+
|
|
+ ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
|
|
+ NULL, &fops_count);
|
|
+ if (!ocd_debugfs_count)
|
|
+ goto err_count;
|
|
+
|
|
+ return;
|
|
+
|
|
+err_count:
|
|
+ debugfs_remove(ocd_debugfs_DS);
|
|
+err_DS:
|
|
+ debugfs_remove(ocd_debugfs_DC);
|
|
+err_DC:
|
|
+ debugfs_remove(ocd_debugfs_root);
|
|
+err_root:
|
|
+ printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
|
|
+}
|
|
+#else
|
|
+static inline void ocd_debugfs_init(void)
|
|
+{
|
|
+
|
|
+}
|
|
+#endif
|
|
+
|
|
+static int __init ocd_init(void)
|
|
+{
|
|
+ spin_lock_init(&ocd_lock);
|
|
+ ocd_debugfs_init();
|
|
+ return 0;
|
|
+}
|
|
+arch_initcall(ocd_init);
|
|
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
|
|
index 9d6dac8..eaaa69b 100644
|
|
--- a/arch/avr32/kernel/process.c
|
|
+++ b/arch/avr32/kernel/process.c
|
|
@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread);
|
|
*/
|
|
void exit_thread(void)
|
|
{
|
|
- /* nothing to do */
|
|
+ ocd_disable(current);
|
|
}
|
|
|
|
void flush_thread(void)
|
|
@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
|
|
p->thread.cpu_context.ksp = (unsigned long)childregs;
|
|
p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
|
|
|
|
+ if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
|
|
+ ocd_enable(p);
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
|
|
index 002369e..1fed38f 100644
|
|
--- a/arch/avr32/kernel/ptrace.c
|
|
+++ b/arch/avr32/kernel/ptrace.c
|
|
@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *child)
|
|
{
|
|
clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
|
|
clear_tsk_thread_flag(child, TIF_BREAKPOINT);
|
|
+ ocd_disable(child);
|
|
}
|
|
|
|
/*
|
|
@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
|
|
{
|
|
int ret;
|
|
|
|
- pr_debug("ptrace: Enabling monitor mode...\n");
|
|
- ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
|
|
- | (1 << OCD_DC_DBE_BIT));
|
|
-
|
|
switch (request) {
|
|
/* Read the word at location addr in the child process */
|
|
case PTRACE_PEEKTEXT:
|
|
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
|
|
index 4b4c188..488078d 100644
|
|
--- a/arch/avr32/kernel/setup.c
|
|
+++ b/arch/avr32/kernel/setup.c
|
|
@@ -273,6 +273,8 @@ static int __init early_parse_fbmem(char *p)
|
|
printk(KERN_WARNING
|
|
"Failed to allocate framebuffer memory\n");
|
|
fbmem_size = 0;
|
|
+ } else {
|
|
+ memset(__va(fbmem_start), 0, fbmem_size);
|
|
}
|
|
}
|
|
|
|
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
|
|
index 0ec1485..5616a00 100644
|
|
--- a/arch/avr32/kernel/signal.c
|
|
+++ b/arch/avr32/kernel/signal.c
|
|
@@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall)
|
|
if (!user_mode(regs))
|
|
return 0;
|
|
|
|
- if (try_to_freeze()) {
|
|
- signr = 0;
|
|
- if (!signal_pending(current))
|
|
- goto no_signal;
|
|
- }
|
|
-
|
|
if (test_thread_flag(TIF_RESTORE_SIGMASK))
|
|
oldset = ¤t->saved_sigmask;
|
|
else if (!oldset)
|
|
oldset = ¤t->blocked;
|
|
|
|
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
|
|
-no_signal:
|
|
if (syscall) {
|
|
switch (regs->r12) {
|
|
case -ERESTART_RESTARTBLOCK:
|
|
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
|
|
index 870c075..cf6f686 100644
|
|
--- a/arch/avr32/kernel/traps.c
|
|
+++ b/arch/avr32/kernel/traps.c
|
|
@@ -9,6 +9,7 @@
|
|
#include <linux/bug.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kallsyms.h>
|
|
+#include <linux/kdebug.h>
|
|
#include <linux/module.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/sched.h>
|
|
@@ -107,9 +108,23 @@ void _exception(long signr, struct pt_regs *regs, int code,
|
|
|
|
asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
|
|
{
|
|
- printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
|
|
- show_regs_log_lvl(regs, KERN_ALERT);
|
|
- show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
|
|
+ int ret;
|
|
+
|
|
+ nmi_enter();
|
|
+
|
|
+ ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT);
|
|
+ switch (ret) {
|
|
+ case NOTIFY_OK:
|
|
+ case NOTIFY_STOP:
|
|
+ return;
|
|
+ case NOTIFY_BAD:
|
|
+ die("Fatal Non-Maskable Interrupt", regs, SIGINT);
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
|
|
+ nmi_disable();
|
|
}
|
|
|
|
asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
|
|
diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
|
|
index eb30783..0eb590a 100644
|
|
--- a/arch/avr32/mach-at32ap/Kconfig
|
|
+++ b/arch/avr32/mach-at32ap/Kconfig
|
|
@@ -3,9 +3,9 @@ if PLATFORM_AT32AP
|
|
menu "Atmel AVR32 AP options"
|
|
|
|
choice
|
|
- prompt "AT32AP7000 static memory bus width"
|
|
- depends on CPU_AT32AP7000
|
|
- default AP7000_16_BIT_SMC
|
|
+ prompt "AT32AP700x static memory bus width"
|
|
+ depends on CPU_AT32AP700X
|
|
+ default AP700X_16_BIT_SMC
|
|
help
|
|
Define the width of the AP7000 external static memory interface.
|
|
This is used to determine how to mangle the address and/or data
|
|
@@ -15,17 +15,24 @@ choice
|
|
width for all chip selects, excluding the flash (which is using
|
|
raw access and is thus not affected by any of this.)
|
|
|
|
-config AP7000_32_BIT_SMC
|
|
+config AP700X_32_BIT_SMC
|
|
bool "32 bit"
|
|
|
|
-config AP7000_16_BIT_SMC
|
|
+config AP700X_16_BIT_SMC
|
|
bool "16 bit"
|
|
|
|
-config AP7000_8_BIT_SMC
|
|
+config AP700X_8_BIT_SMC
|
|
bool "8 bit"
|
|
|
|
endchoice
|
|
|
|
+config GPIO_DEV
|
|
+ bool "GPIO /dev interface"
|
|
+ select CONFIGFS_FS
|
|
+ default n
|
|
+ help
|
|
+ Say `Y' to enable a /dev interface to the GPIO pins.
|
|
+
|
|
endmenu
|
|
|
|
endif # PLATFORM_AT32AP
|
|
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
|
|
index a8b4450..0f6162e 100644
|
|
--- a/arch/avr32/mach-at32ap/Makefile
|
|
+++ b/arch/avr32/mach-at32ap/Makefile
|
|
@@ -1,4 +1,5 @@
|
|
obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
|
|
-obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
|
|
-obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
|
|
+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
|
|
+obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
|
|
obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
|
|
+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
|
|
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
|
|
deleted file mode 100644
|
|
index 7c4388f..0000000
|
|
--- a/arch/avr32/mach-at32ap/at32ap7000.c
|
|
+++ /dev/null
|
|
@@ -1,1730 +0,0 @@
|
|
-/*
|
|
- * Copyright (C) 2005-2006 Atmel Corporation
|
|
- *
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
- * it under the terms of the GNU General Public License version 2 as
|
|
- * published by the Free Software Foundation.
|
|
- */
|
|
-#include <linux/clk.h>
|
|
-#include <linux/fb.h>
|
|
-#include <linux/init.h>
|
|
-#include <linux/platform_device.h>
|
|
-#include <linux/dma-mapping.h>
|
|
-#include <linux/spi/spi.h>
|
|
-
|
|
-#include <asm/io.h>
|
|
-
|
|
-#include <asm/arch/at32ap7000.h>
|
|
-#include <asm/arch/board.h>
|
|
-#include <asm/arch/portmux.h>
|
|
-
|
|
-#include <video/atmel_lcdc.h>
|
|
-
|
|
-#include "clock.h"
|
|
-#include "hmatrix.h"
|
|
-#include "pio.h"
|
|
-#include "pm.h"
|
|
-
|
|
-
|
|
-#define PBMEM(base) \
|
|
- { \
|
|
- .start = base, \
|
|
- .end = base + 0x3ff, \
|
|
- .flags = IORESOURCE_MEM, \
|
|
- }
|
|
-#define IRQ(num) \
|
|
- { \
|
|
- .start = num, \
|
|
- .end = num, \
|
|
- .flags = IORESOURCE_IRQ, \
|
|
- }
|
|
-#define NAMED_IRQ(num, _name) \
|
|
- { \
|
|
- .start = num, \
|
|
- .end = num, \
|
|
- .name = _name, \
|
|
- .flags = IORESOURCE_IRQ, \
|
|
- }
|
|
-
|
|
-/* REVISIT these assume *every* device supports DMA, but several
|
|
- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
|
|
- */
|
|
-#define DEFINE_DEV(_name, _id) \
|
|
-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
|
|
-static struct platform_device _name##_id##_device = { \
|
|
- .name = #_name, \
|
|
- .id = _id, \
|
|
- .dev = { \
|
|
- .dma_mask = &_name##_id##_dma_mask, \
|
|
- .coherent_dma_mask = DMA_32BIT_MASK, \
|
|
- }, \
|
|
- .resource = _name##_id##_resource, \
|
|
- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
|
|
-}
|
|
-#define DEFINE_DEV_DATA(_name, _id) \
|
|
-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
|
|
-static struct platform_device _name##_id##_device = { \
|
|
- .name = #_name, \
|
|
- .id = _id, \
|
|
- .dev = { \
|
|
- .dma_mask = &_name##_id##_dma_mask, \
|
|
- .platform_data = &_name##_id##_data, \
|
|
- .coherent_dma_mask = DMA_32BIT_MASK, \
|
|
- }, \
|
|
- .resource = _name##_id##_resource, \
|
|
- .num_resources = ARRAY_SIZE(_name##_id##_resource), \
|
|
-}
|
|
-
|
|
-#define select_peripheral(pin, periph, flags) \
|
|
- at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
|
|
-
|
|
-#define DEV_CLK(_name, devname, bus, _index) \
|
|
-static struct clk devname##_##_name = { \
|
|
- .name = #_name, \
|
|
- .dev = &devname##_device.dev, \
|
|
- .parent = &bus##_clk, \
|
|
- .mode = bus##_clk_mode, \
|
|
- .get_rate = bus##_clk_get_rate, \
|
|
- .index = _index, \
|
|
-}
|
|
-
|
|
-static DEFINE_SPINLOCK(pm_lock);
|
|
-
|
|
-unsigned long at32ap7000_osc_rates[3] = {
|
|
- [0] = 32768,
|
|
- /* FIXME: these are ATSTK1002-specific */
|
|
- [1] = 20000000,
|
|
- [2] = 12000000,
|
|
-};
|
|
-
|
|
-static unsigned long osc_get_rate(struct clk *clk)
|
|
-{
|
|
- return at32ap7000_osc_rates[clk->index];
|
|
-}
|
|
-
|
|
-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
|
|
-{
|
|
- unsigned long div, mul, rate;
|
|
-
|
|
- if (!(control & PM_BIT(PLLEN)))
|
|
- return 0;
|
|
-
|
|
- div = PM_BFEXT(PLLDIV, control) + 1;
|
|
- mul = PM_BFEXT(PLLMUL, control) + 1;
|
|
-
|
|
- rate = clk->parent->get_rate(clk->parent);
|
|
- rate = (rate + div / 2) / div;
|
|
- rate *= mul;
|
|
-
|
|
- return rate;
|
|
-}
|
|
-
|
|
-static unsigned long pll0_get_rate(struct clk *clk)
|
|
-{
|
|
- u32 control;
|
|
-
|
|
- control = pm_readl(PLL0);
|
|
-
|
|
- return pll_get_rate(clk, control);
|
|
-}
|
|
-
|
|
-static unsigned long pll1_get_rate(struct clk *clk)
|
|
-{
|
|
- u32 control;
|
|
-
|
|
- control = pm_readl(PLL1);
|
|
-
|
|
- return pll_get_rate(clk, control);
|
|
-}
|
|
-
|
|
-/*
|
|
- * The AT32AP7000 has five primary clock sources: One 32kHz
|
|
- * oscillator, two crystal oscillators and two PLLs.
|
|
- */
|
|
-static struct clk osc32k = {
|
|
- .name = "osc32k",
|
|
- .get_rate = osc_get_rate,
|
|
- .users = 1,
|
|
- .index = 0,
|
|
-};
|
|
-static struct clk osc0 = {
|
|
- .name = "osc0",
|
|
- .get_rate = osc_get_rate,
|
|
- .users = 1,
|
|
- .index = 1,
|
|
-};
|
|
-static struct clk osc1 = {
|
|
- .name = "osc1",
|
|
- .get_rate = osc_get_rate,
|
|
- .index = 2,
|
|
-};
|
|
-static struct clk pll0 = {
|
|
- .name = "pll0",
|
|
- .get_rate = pll0_get_rate,
|
|
- .parent = &osc0,
|
|
-};
|
|
-static struct clk pll1 = {
|
|
- .name = "pll1",
|
|
- .get_rate = pll1_get_rate,
|
|
- .parent = &osc0,
|
|
-};
|
|
-
|
|
-/*
|
|
- * The main clock can be either osc0 or pll0. The boot loader may
|
|
- * have chosen one for us, so we don't really know which one until we
|
|
- * have a look at the SM.
|
|
- */
|
|
-static struct clk *main_clock;
|
|
-
|
|
-/*
|
|
- * Synchronous clocks are generated from the main clock. The clocks
|
|
- * must satisfy the constraint
|
|
- * fCPU >= fHSB >= fPB
|
|
- * i.e. each clock must not be faster than its parent.
|
|
- */
|
|
-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
|
|
-{
|
|
- return main_clock->get_rate(main_clock) >> shift;
|
|
-};
|
|
-
|
|
-static void cpu_clk_mode(struct clk *clk, int enabled)
|
|
-{
|
|
- unsigned long flags;
|
|
- u32 mask;
|
|
-
|
|
- spin_lock_irqsave(&pm_lock, flags);
|
|
- mask = pm_readl(CPU_MASK);
|
|
- if (enabled)
|
|
- mask |= 1 << clk->index;
|
|
- else
|
|
- mask &= ~(1 << clk->index);
|
|
- pm_writel(CPU_MASK, mask);
|
|
- spin_unlock_irqrestore(&pm_lock, flags);
|
|
-}
|
|
-
|
|
-static unsigned long cpu_clk_get_rate(struct clk *clk)
|
|
-{
|
|
- unsigned long cksel, shift = 0;
|
|
-
|
|
- cksel = pm_readl(CKSEL);
|
|
- if (cksel & PM_BIT(CPUDIV))
|
|
- shift = PM_BFEXT(CPUSEL, cksel) + 1;
|
|
-
|
|
- return bus_clk_get_rate(clk, shift);
|
|
-}
|
|
-
|
|
-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
|
|
-{
|
|
- u32 control;
|
|
- unsigned long parent_rate, child_div, actual_rate, div;
|
|
-
|
|
- parent_rate = clk->parent->get_rate(clk->parent);
|
|
- control = pm_readl(CKSEL);
|
|
-
|
|
- if (control & PM_BIT(HSBDIV))
|
|
- child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
|
|
- else
|
|
- child_div = 1;
|
|
-
|
|
- if (rate > 3 * (parent_rate / 4) || child_div == 1) {
|
|
- actual_rate = parent_rate;
|
|
- control &= ~PM_BIT(CPUDIV);
|
|
- } else {
|
|
- unsigned int cpusel;
|
|
- div = (parent_rate + rate / 2) / rate;
|
|
- if (div > child_div)
|
|
- div = child_div;
|
|
- cpusel = (div > 1) ? (fls(div) - 2) : 0;
|
|
- control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
|
|
- actual_rate = parent_rate / (1 << (cpusel + 1));
|
|
- }
|
|
-
|
|
- pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
|
|
- clk->name, rate, actual_rate);
|
|
-
|
|
- if (apply)
|
|
- pm_writel(CKSEL, control);
|
|
-
|
|
- return actual_rate;
|
|
-}
|
|
-
|
|
-static void hsb_clk_mode(struct clk *clk, int enabled)
|
|
-{
|
|
- unsigned long flags;
|
|
- u32 mask;
|
|
-
|
|
- spin_lock_irqsave(&pm_lock, flags);
|
|
- mask = pm_readl(HSB_MASK);
|
|
- if (enabled)
|
|
- mask |= 1 << clk->index;
|
|
- else
|
|
- mask &= ~(1 << clk->index);
|
|
- pm_writel(HSB_MASK, mask);
|
|
- spin_unlock_irqrestore(&pm_lock, flags);
|
|
-}
|
|
-
|
|
-static unsigned long hsb_clk_get_rate(struct clk *clk)
|
|
-{
|
|
- unsigned long cksel, shift = 0;
|
|
-
|
|
- cksel = pm_readl(CKSEL);
|
|
- if (cksel & PM_BIT(HSBDIV))
|
|
- shift = PM_BFEXT(HSBSEL, cksel) + 1;
|
|
-
|
|
- return bus_clk_get_rate(clk, shift);
|
|
-}
|
|
-
|
|
-static void pba_clk_mode(struct clk *clk, int enabled)
|
|
-{
|
|
- unsigned long flags;
|
|
- u32 mask;
|
|
-
|
|
- spin_lock_irqsave(&pm_lock, flags);
|
|
- mask = pm_readl(PBA_MASK);
|
|
- if (enabled)
|
|
- mask |= 1 << clk->index;
|
|
- else
|
|
- mask &= ~(1 << clk->index);
|
|
- pm_writel(PBA_MASK, mask);
|
|
- spin_unlock_irqrestore(&pm_lock, flags);
|
|
-}
|
|
-
|
|
-static unsigned long pba_clk_get_rate(struct clk *clk)
|
|
-{
|
|
- unsigned long cksel, shift = 0;
|
|
-
|
|
- cksel = pm_readl(CKSEL);
|
|
- if (cksel & PM_BIT(PBADIV))
|
|
- shift = PM_BFEXT(PBASEL, cksel) + 1;
|
|
-
|
|
- return bus_clk_get_rate(clk, shift);
|
|
-}
|
|
-
|
|
-static void pbb_clk_mode(struct clk *clk, int enabled)
|
|
-{
|
|
- unsigned long flags;
|
|
- u32 mask;
|
|
-
|
|
- spin_lock_irqsave(&pm_lock, flags);
|
|
- mask = pm_readl(PBB_MASK);
|
|
- if (enabled)
|
|
- mask |= 1 << clk->index;
|
|
- else
|
|
- mask &= ~(1 << clk->index);
|
|
- pm_writel(PBB_MASK, mask);
|
|
- spin_unlock_irqrestore(&pm_lock, flags);
|
|
-}
|
|
-
|
|
-static unsigned long pbb_clk_get_rate(struct clk *clk)
|
|
-{
|
|
- unsigned long cksel, shift = 0;
|
|
-
|
|
- cksel = pm_readl(CKSEL);
|
|
- if (cksel & PM_BIT(PBBDIV))
|
|
- shift = PM_BFEXT(PBBSEL, cksel) + 1;
|
|
-
|
|
- return bus_clk_get_rate(clk, shift);
|
|
-}
|
|
-
|
|
-static struct clk cpu_clk = {
|
|
- .name = "cpu",
|
|
- .get_rate = cpu_clk_get_rate,
|
|
- .set_rate = cpu_clk_set_rate,
|
|
- .users = 1,
|
|
-};
|
|
-static struct clk hsb_clk = {
|
|
- .name = "hsb",
|
|
- .parent = &cpu_clk,
|
|
- .get_rate = hsb_clk_get_rate,
|
|
-};
|
|
-static struct clk pba_clk = {
|
|
- .name = "pba",
|
|
- .parent = &hsb_clk,
|
|
- .mode = hsb_clk_mode,
|
|
- .get_rate = pba_clk_get_rate,
|
|
- .index = 1,
|
|
-};
|
|
-static struct clk pbb_clk = {
|
|
- .name = "pbb",
|
|
- .parent = &hsb_clk,
|
|
- .mode = hsb_clk_mode,
|
|
- .get_rate = pbb_clk_get_rate,
|
|
- .users = 1,
|
|
- .index = 2,
|
|
-};
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * Generic Clock operations
|
|
- * -------------------------------------------------------------------- */
|
|
-
|
|
-static void genclk_mode(struct clk *clk, int enabled)
|
|
-{
|
|
- u32 control;
|
|
-
|
|
- control = pm_readl(GCCTRL(clk->index));
|
|
- if (enabled)
|
|
- control |= PM_BIT(CEN);
|
|
- else
|
|
- control &= ~PM_BIT(CEN);
|
|
- pm_writel(GCCTRL(clk->index), control);
|
|
-}
|
|
-
|
|
-static unsigned long genclk_get_rate(struct clk *clk)
|
|
-{
|
|
- u32 control;
|
|
- unsigned long div = 1;
|
|
-
|
|
- control = pm_readl(GCCTRL(clk->index));
|
|
- if (control & PM_BIT(DIVEN))
|
|
- div = 2 * (PM_BFEXT(DIV, control) + 1);
|
|
-
|
|
- return clk->parent->get_rate(clk->parent) / div;
|
|
-}
|
|
-
|
|
-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
|
|
-{
|
|
- u32 control;
|
|
- unsigned long parent_rate, actual_rate, div;
|
|
-
|
|
- parent_rate = clk->parent->get_rate(clk->parent);
|
|
- control = pm_readl(GCCTRL(clk->index));
|
|
-
|
|
- if (rate > 3 * parent_rate / 4) {
|
|
- actual_rate = parent_rate;
|
|
- control &= ~PM_BIT(DIVEN);
|
|
- } else {
|
|
- div = (parent_rate + rate) / (2 * rate) - 1;
|
|
- control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
|
|
- actual_rate = parent_rate / (2 * (div + 1));
|
|
- }
|
|
-
|
|
- dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
|
|
- clk->name, rate, actual_rate);
|
|
-
|
|
- if (apply)
|
|
- pm_writel(GCCTRL(clk->index), control);
|
|
-
|
|
- return actual_rate;
|
|
-}
|
|
-
|
|
-int genclk_set_parent(struct clk *clk, struct clk *parent)
|
|
-{
|
|
- u32 control;
|
|
-
|
|
- dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
|
|
- clk->name, parent->name, clk->parent->name);
|
|
-
|
|
- control = pm_readl(GCCTRL(clk->index));
|
|
-
|
|
- if (parent == &osc1 || parent == &pll1)
|
|
- control |= PM_BIT(OSCSEL);
|
|
- else if (parent == &osc0 || parent == &pll0)
|
|
- control &= ~PM_BIT(OSCSEL);
|
|
- else
|
|
- return -EINVAL;
|
|
-
|
|
- if (parent == &pll0 || parent == &pll1)
|
|
- control |= PM_BIT(PLLSEL);
|
|
- else
|
|
- control &= ~PM_BIT(PLLSEL);
|
|
-
|
|
- pm_writel(GCCTRL(clk->index), control);
|
|
- clk->parent = parent;
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static void __init genclk_init_parent(struct clk *clk)
|
|
-{
|
|
- u32 control;
|
|
- struct clk *parent;
|
|
-
|
|
- BUG_ON(clk->index > 7);
|
|
-
|
|
- control = pm_readl(GCCTRL(clk->index));
|
|
- if (control & PM_BIT(OSCSEL))
|
|
- parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
|
|
- else
|
|
- parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
|
|
-
|
|
- clk->parent = parent;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * System peripherals
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource at32_pm0_resource[] = {
|
|
- {
|
|
- .start = 0xfff00000,
|
|
- .end = 0xfff0007f,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(20),
|
|
-};
|
|
-
|
|
-static struct resource at32ap700x_rtc0_resource[] = {
|
|
- {
|
|
- .start = 0xfff00080,
|
|
- .end = 0xfff000af,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(21),
|
|
-};
|
|
-
|
|
-static struct resource at32_wdt0_resource[] = {
|
|
- {
|
|
- .start = 0xfff000b0,
|
|
- .end = 0xfff000cf,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
-};
|
|
-
|
|
-static struct resource at32_eic0_resource[] = {
|
|
- {
|
|
- .start = 0xfff00100,
|
|
- .end = 0xfff0013f,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(19),
|
|
-};
|
|
-
|
|
-DEFINE_DEV(at32_pm, 0);
|
|
-DEFINE_DEV(at32ap700x_rtc, 0);
|
|
-DEFINE_DEV(at32_wdt, 0);
|
|
-DEFINE_DEV(at32_eic, 0);
|
|
-
|
|
-/*
|
|
- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
|
|
- * is always running.
|
|
- */
|
|
-static struct clk at32_pm_pclk = {
|
|
- .name = "pclk",
|
|
- .dev = &at32_pm0_device.dev,
|
|
- .parent = &pbb_clk,
|
|
- .mode = pbb_clk_mode,
|
|
- .get_rate = pbb_clk_get_rate,
|
|
- .users = 1,
|
|
- .index = 0,
|
|
-};
|
|
-
|
|
-static struct resource intc0_resource[] = {
|
|
- PBMEM(0xfff00400),
|
|
-};
|
|
-struct platform_device at32_intc0_device = {
|
|
- .name = "intc",
|
|
- .id = 0,
|
|
- .resource = intc0_resource,
|
|
- .num_resources = ARRAY_SIZE(intc0_resource),
|
|
-};
|
|
-DEV_CLK(pclk, at32_intc0, pbb, 1);
|
|
-
|
|
-static struct clk ebi_clk = {
|
|
- .name = "ebi",
|
|
- .parent = &hsb_clk,
|
|
- .mode = hsb_clk_mode,
|
|
- .get_rate = hsb_clk_get_rate,
|
|
- .users = 1,
|
|
-};
|
|
-static struct clk hramc_clk = {
|
|
- .name = "hramc",
|
|
- .parent = &hsb_clk,
|
|
- .mode = hsb_clk_mode,
|
|
- .get_rate = hsb_clk_get_rate,
|
|
- .users = 1,
|
|
- .index = 3,
|
|
-};
|
|
-
|
|
-static struct resource smc0_resource[] = {
|
|
- PBMEM(0xfff03400),
|
|
-};
|
|
-DEFINE_DEV(smc, 0);
|
|
-DEV_CLK(pclk, smc0, pbb, 13);
|
|
-DEV_CLK(mck, smc0, hsb, 0);
|
|
-
|
|
-static struct platform_device pdc_device = {
|
|
- .name = "pdc",
|
|
- .id = 0,
|
|
-};
|
|
-DEV_CLK(hclk, pdc, hsb, 4);
|
|
-DEV_CLK(pclk, pdc, pba, 16);
|
|
-
|
|
-static struct clk pico_clk = {
|
|
- .name = "pico",
|
|
- .parent = &cpu_clk,
|
|
- .mode = cpu_clk_mode,
|
|
- .get_rate = cpu_clk_get_rate,
|
|
- .users = 1,
|
|
-};
|
|
-
|
|
-static struct resource dmaca0_resource[] = {
|
|
- {
|
|
- .start = 0xff200000,
|
|
- .end = 0xff20ffff,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(2),
|
|
-};
|
|
-DEFINE_DEV(dmaca, 0);
|
|
-DEV_CLK(hclk, dmaca0, hsb, 10);
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * HMATRIX
|
|
- * -------------------------------------------------------------------- */
|
|
-
|
|
-static struct clk hmatrix_clk = {
|
|
- .name = "hmatrix_clk",
|
|
- .parent = &pbb_clk,
|
|
- .mode = pbb_clk_mode,
|
|
- .get_rate = pbb_clk_get_rate,
|
|
- .index = 2,
|
|
- .users = 1,
|
|
-};
|
|
-#define HMATRIX_BASE ((void __iomem *)0xfff00800)
|
|
-
|
|
-#define hmatrix_readl(reg) \
|
|
- __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
|
|
-#define hmatrix_writel(reg,value) \
|
|
- __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
|
|
-
|
|
-/*
|
|
- * Set bits in the HMATRIX Special Function Register (SFR) used by the
|
|
- * External Bus Interface (EBI). This can be used to enable special
|
|
- * features like CompactFlash support, NAND Flash support, etc. on
|
|
- * certain chipselects.
|
|
- */
|
|
-static inline void set_ebi_sfr_bits(u32 mask)
|
|
-{
|
|
- u32 sfr;
|
|
-
|
|
- clk_enable(&hmatrix_clk);
|
|
- sfr = hmatrix_readl(SFR4);
|
|
- sfr |= mask;
|
|
- hmatrix_writel(SFR4, sfr);
|
|
- clk_disable(&hmatrix_clk);
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * System Timer/Counter (TC)
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource at32_systc0_resource[] = {
|
|
- PBMEM(0xfff00c00),
|
|
- IRQ(22),
|
|
-};
|
|
-struct platform_device at32_systc0_device = {
|
|
- .name = "systc",
|
|
- .id = 0,
|
|
- .resource = at32_systc0_resource,
|
|
- .num_resources = ARRAY_SIZE(at32_systc0_resource),
|
|
-};
|
|
-DEV_CLK(pclk, at32_systc0, pbb, 3);
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * PIO
|
|
- * -------------------------------------------------------------------- */
|
|
-
|
|
-static struct resource pio0_resource[] = {
|
|
- PBMEM(0xffe02800),
|
|
- IRQ(13),
|
|
-};
|
|
-DEFINE_DEV(pio, 0);
|
|
-DEV_CLK(mck, pio0, pba, 10);
|
|
-
|
|
-static struct resource pio1_resource[] = {
|
|
- PBMEM(0xffe02c00),
|
|
- IRQ(14),
|
|
-};
|
|
-DEFINE_DEV(pio, 1);
|
|
-DEV_CLK(mck, pio1, pba, 11);
|
|
-
|
|
-static struct resource pio2_resource[] = {
|
|
- PBMEM(0xffe03000),
|
|
- IRQ(15),
|
|
-};
|
|
-DEFINE_DEV(pio, 2);
|
|
-DEV_CLK(mck, pio2, pba, 12);
|
|
-
|
|
-static struct resource pio3_resource[] = {
|
|
- PBMEM(0xffe03400),
|
|
- IRQ(16),
|
|
-};
|
|
-DEFINE_DEV(pio, 3);
|
|
-DEV_CLK(mck, pio3, pba, 13);
|
|
-
|
|
-static struct resource pio4_resource[] = {
|
|
- PBMEM(0xffe03800),
|
|
- IRQ(17),
|
|
-};
|
|
-DEFINE_DEV(pio, 4);
|
|
-DEV_CLK(mck, pio4, pba, 14);
|
|
-
|
|
-void __init at32_add_system_devices(void)
|
|
-{
|
|
- platform_device_register(&at32_pm0_device);
|
|
- platform_device_register(&at32_intc0_device);
|
|
- platform_device_register(&at32ap700x_rtc0_device);
|
|
- platform_device_register(&at32_wdt0_device);
|
|
- platform_device_register(&at32_eic0_device);
|
|
- platform_device_register(&smc0_device);
|
|
- platform_device_register(&pdc_device);
|
|
- platform_device_register(&dmaca0_device);
|
|
-
|
|
- platform_device_register(&at32_systc0_device);
|
|
-
|
|
- platform_device_register(&pio0_device);
|
|
- platform_device_register(&pio1_device);
|
|
- platform_device_register(&pio2_device);
|
|
- platform_device_register(&pio3_device);
|
|
- platform_device_register(&pio4_device);
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * USART
|
|
- * -------------------------------------------------------------------- */
|
|
-
|
|
-static struct atmel_uart_data atmel_usart0_data = {
|
|
- .use_dma_tx = 1,
|
|
- .use_dma_rx = 1,
|
|
-};
|
|
-static struct resource atmel_usart0_resource[] = {
|
|
- PBMEM(0xffe00c00),
|
|
- IRQ(6),
|
|
-};
|
|
-DEFINE_DEV_DATA(atmel_usart, 0);
|
|
-DEV_CLK(usart, atmel_usart0, pba, 3);
|
|
-
|
|
-static struct atmel_uart_data atmel_usart1_data = {
|
|
- .use_dma_tx = 1,
|
|
- .use_dma_rx = 1,
|
|
-};
|
|
-static struct resource atmel_usart1_resource[] = {
|
|
- PBMEM(0xffe01000),
|
|
- IRQ(7),
|
|
-};
|
|
-DEFINE_DEV_DATA(atmel_usart, 1);
|
|
-DEV_CLK(usart, atmel_usart1, pba, 4);
|
|
-
|
|
-static struct atmel_uart_data atmel_usart2_data = {
|
|
- .use_dma_tx = 1,
|
|
- .use_dma_rx = 1,
|
|
-};
|
|
-static struct resource atmel_usart2_resource[] = {
|
|
- PBMEM(0xffe01400),
|
|
- IRQ(8),
|
|
-};
|
|
-DEFINE_DEV_DATA(atmel_usart, 2);
|
|
-DEV_CLK(usart, atmel_usart2, pba, 5);
|
|
-
|
|
-static struct atmel_uart_data atmel_usart3_data = {
|
|
- .use_dma_tx = 1,
|
|
- .use_dma_rx = 1,
|
|
-};
|
|
-static struct resource atmel_usart3_resource[] = {
|
|
- PBMEM(0xffe01800),
|
|
- IRQ(9),
|
|
-};
|
|
-DEFINE_DEV_DATA(atmel_usart, 3);
|
|
-DEV_CLK(usart, atmel_usart3, pba, 6);
|
|
-
|
|
-static inline void configure_usart0_pins(void)
|
|
-{
|
|
- select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
|
|
- select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
|
|
-}
|
|
-
|
|
-static inline void configure_usart1_pins(void)
|
|
-{
|
|
- select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
|
|
- select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
|
|
-}
|
|
-
|
|
-static inline void configure_usart2_pins(void)
|
|
-{
|
|
- select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
|
|
- select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
|
|
-}
|
|
-
|
|
-static inline void configure_usart3_pins(void)
|
|
-{
|
|
- select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
|
|
- select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
|
|
-}
|
|
-
|
|
-static struct platform_device *__initdata at32_usarts[4];
|
|
-
|
|
-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- switch (hw_id) {
|
|
- case 0:
|
|
- pdev = &atmel_usart0_device;
|
|
- configure_usart0_pins();
|
|
- break;
|
|
- case 1:
|
|
- pdev = &atmel_usart1_device;
|
|
- configure_usart1_pins();
|
|
- break;
|
|
- case 2:
|
|
- pdev = &atmel_usart2_device;
|
|
- configure_usart2_pins();
|
|
- break;
|
|
- case 3:
|
|
- pdev = &atmel_usart3_device;
|
|
- configure_usart3_pins();
|
|
- break;
|
|
- default:
|
|
- return;
|
|
- }
|
|
-
|
|
- if (PXSEG(pdev->resource[0].start) == P4SEG) {
|
|
- /* Addresses in the P4 segment are permanently mapped 1:1 */
|
|
- struct atmel_uart_data *data = pdev->dev.platform_data;
|
|
- data->regs = (void __iomem *)pdev->resource[0].start;
|
|
- }
|
|
-
|
|
- pdev->id = line;
|
|
- at32_usarts[line] = pdev;
|
|
-}
|
|
-
|
|
-struct platform_device *__init at32_add_device_usart(unsigned int id)
|
|
-{
|
|
- platform_device_register(at32_usarts[id]);
|
|
- return at32_usarts[id];
|
|
-}
|
|
-
|
|
-struct platform_device *atmel_default_console_device;
|
|
-
|
|
-void __init at32_setup_serial_console(unsigned int usart_id)
|
|
-{
|
|
- atmel_default_console_device = at32_usarts[usart_id];
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * Ethernet
|
|
- * -------------------------------------------------------------------- */
|
|
-
|
|
-static struct eth_platform_data macb0_data;
|
|
-static struct resource macb0_resource[] = {
|
|
- PBMEM(0xfff01800),
|
|
- IRQ(25),
|
|
-};
|
|
-DEFINE_DEV_DATA(macb, 0);
|
|
-DEV_CLK(hclk, macb0, hsb, 8);
|
|
-DEV_CLK(pclk, macb0, pbb, 6);
|
|
-
|
|
-static struct eth_platform_data macb1_data;
|
|
-static struct resource macb1_resource[] = {
|
|
- PBMEM(0xfff01c00),
|
|
- IRQ(26),
|
|
-};
|
|
-DEFINE_DEV_DATA(macb, 1);
|
|
-DEV_CLK(hclk, macb1, hsb, 9);
|
|
-DEV_CLK(pclk, macb1, pbb, 7);
|
|
-
|
|
-struct platform_device *__init
|
|
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- switch (id) {
|
|
- case 0:
|
|
- pdev = &macb0_device;
|
|
-
|
|
- select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
|
|
- select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
|
|
- select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
|
|
- select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
|
|
- select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
|
|
- select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
|
|
- select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
|
|
- select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
|
|
- select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
|
|
- select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
|
|
-
|
|
- if (!data->is_rmii) {
|
|
- select_peripheral(PC(0), PERIPH_A, 0); /* COL */
|
|
- select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
|
|
- select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
|
|
- select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
|
|
- select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
|
|
- select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
|
|
- select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
|
|
- select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
|
|
- select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
|
|
- }
|
|
- break;
|
|
-
|
|
- case 1:
|
|
- pdev = &macb1_device;
|
|
-
|
|
- select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
|
|
- select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
|
|
- select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
|
|
- select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
|
|
- select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
|
|
- select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
|
|
- select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
|
|
- select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
|
|
- select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
|
|
- select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
|
|
-
|
|
- if (!data->is_rmii) {
|
|
- select_peripheral(PC(19), PERIPH_B, 0); /* COL */
|
|
- select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
|
|
- select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
|
|
- select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
|
|
- select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
|
|
- select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
|
|
- select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
|
|
- select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
|
|
- select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
|
|
- }
|
|
- break;
|
|
-
|
|
- default:
|
|
- return NULL;
|
|
- }
|
|
-
|
|
- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
|
|
- platform_device_register(pdev);
|
|
-
|
|
- return pdev;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * SPI
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource atmel_spi0_resource[] = {
|
|
- PBMEM(0xffe00000),
|
|
- IRQ(3),
|
|
-};
|
|
-DEFINE_DEV(atmel_spi, 0);
|
|
-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
|
|
-
|
|
-static struct resource atmel_spi1_resource[] = {
|
|
- PBMEM(0xffe00400),
|
|
- IRQ(4),
|
|
-};
|
|
-DEFINE_DEV(atmel_spi, 1);
|
|
-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
|
|
-
|
|
-static void __init
|
|
-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
|
|
- unsigned int n, const u8 *pins)
|
|
-{
|
|
- unsigned int pin, mode;
|
|
-
|
|
- for (; n; n--, b++) {
|
|
- b->bus_num = bus_num;
|
|
- if (b->chip_select >= 4)
|
|
- continue;
|
|
- pin = (unsigned)b->controller_data;
|
|
- if (!pin) {
|
|
- pin = pins[b->chip_select];
|
|
- b->controller_data = (void *)pin;
|
|
- }
|
|
- mode = AT32_GPIOF_OUTPUT;
|
|
- if (!(b->mode & SPI_CS_HIGH))
|
|
- mode |= AT32_GPIOF_HIGH;
|
|
- at32_select_gpio(pin, mode);
|
|
- }
|
|
-}
|
|
-
|
|
-struct platform_device *__init
|
|
-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
|
|
-{
|
|
- /*
|
|
- * Manage the chipselects as GPIOs, normally using the same pins
|
|
- * the SPI controller expects; but boards can use other pins.
|
|
- */
|
|
- static u8 __initdata spi0_pins[] =
|
|
- { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
|
|
- GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
|
|
- static u8 __initdata spi1_pins[] =
|
|
- { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
|
|
- GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
|
|
- struct platform_device *pdev;
|
|
-
|
|
- switch (id) {
|
|
- case 0:
|
|
- pdev = &atmel_spi0_device;
|
|
- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
|
|
- select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
|
|
- select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
|
|
- at32_spi_setup_slaves(0, b, n, spi0_pins);
|
|
- break;
|
|
-
|
|
- case 1:
|
|
- pdev = &atmel_spi1_device;
|
|
- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
|
|
- select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
|
|
- select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
|
|
- at32_spi_setup_slaves(1, b, n, spi1_pins);
|
|
- break;
|
|
-
|
|
- default:
|
|
- return NULL;
|
|
- }
|
|
-
|
|
- spi_register_board_info(b, n);
|
|
- platform_device_register(pdev);
|
|
- return pdev;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * TWI
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource atmel_twi0_resource[] __initdata = {
|
|
- PBMEM(0xffe00800),
|
|
- IRQ(5),
|
|
-};
|
|
-static struct clk atmel_twi0_pclk = {
|
|
- .name = "twi_pclk",
|
|
- .parent = &pba_clk,
|
|
- .mode = pba_clk_mode,
|
|
- .get_rate = pba_clk_get_rate,
|
|
- .index = 2,
|
|
-};
|
|
-
|
|
-struct platform_device *__init at32_add_device_twi(unsigned int id)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- if (id != 0)
|
|
- return NULL;
|
|
-
|
|
- pdev = platform_device_alloc("atmel_twi", id);
|
|
- if (!pdev)
|
|
- return NULL;
|
|
-
|
|
- if (platform_device_add_resources(pdev, atmel_twi0_resource,
|
|
- ARRAY_SIZE(atmel_twi0_resource)))
|
|
- goto err_add_resources;
|
|
-
|
|
- select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
|
|
- select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
|
|
-
|
|
- atmel_twi0_pclk.dev = &pdev->dev;
|
|
-
|
|
- platform_device_add(pdev);
|
|
- return pdev;
|
|
-
|
|
-err_add_resources:
|
|
- platform_device_put(pdev);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * MMC
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource atmel_mci0_resource[] __initdata = {
|
|
- PBMEM(0xfff02400),
|
|
- IRQ(28),
|
|
-};
|
|
-static struct clk atmel_mci0_pclk = {
|
|
- .name = "mci_clk",
|
|
- .parent = &pbb_clk,
|
|
- .mode = pbb_clk_mode,
|
|
- .get_rate = pbb_clk_get_rate,
|
|
- .index = 9,
|
|
-};
|
|
-
|
|
-struct platform_device *__init at32_add_device_mci(unsigned int id)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- if (id != 0)
|
|
- return NULL;
|
|
-
|
|
- pdev = platform_device_alloc("atmel_mci", id);
|
|
- if (!pdev)
|
|
- return NULL;
|
|
-
|
|
- if (platform_device_add_resources(pdev, atmel_mci0_resource,
|
|
- ARRAY_SIZE(atmel_mci0_resource)))
|
|
- goto err_add_resources;
|
|
-
|
|
- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
|
|
- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
|
|
- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
|
|
- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
|
|
- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
|
|
- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
|
|
-
|
|
- atmel_mci0_pclk.dev = &pdev->dev;
|
|
-
|
|
- platform_device_add(pdev);
|
|
- return pdev;
|
|
-
|
|
-err_add_resources:
|
|
- platform_device_put(pdev);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * LCDC
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct atmel_lcdfb_info atmel_lcdfb0_data;
|
|
-static struct resource atmel_lcdfb0_resource[] = {
|
|
- {
|
|
- .start = 0xff000000,
|
|
- .end = 0xff000fff,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(1),
|
|
- {
|
|
- /* Placeholder for pre-allocated fb memory */
|
|
- .start = 0x00000000,
|
|
- .end = 0x00000000,
|
|
- .flags = 0,
|
|
- },
|
|
-};
|
|
-DEFINE_DEV_DATA(atmel_lcdfb, 0);
|
|
-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
|
|
-static struct clk atmel_lcdfb0_pixclk = {
|
|
- .name = "lcdc_clk",
|
|
- .dev = &atmel_lcdfb0_device.dev,
|
|
- .mode = genclk_mode,
|
|
- .get_rate = genclk_get_rate,
|
|
- .set_rate = genclk_set_rate,
|
|
- .set_parent = genclk_set_parent,
|
|
- .index = 7,
|
|
-};
|
|
-
|
|
-struct platform_device *__init
|
|
-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
|
|
- unsigned long fbmem_start, unsigned long fbmem_len)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
- struct atmel_lcdfb_info *info;
|
|
- struct fb_monspecs *monspecs;
|
|
- struct fb_videomode *modedb;
|
|
- unsigned int modedb_size;
|
|
-
|
|
- /*
|
|
- * Do a deep copy of the fb data, monspecs and modedb. Make
|
|
- * sure all allocations are done before setting up the
|
|
- * portmux.
|
|
- */
|
|
- monspecs = kmemdup(data->default_monspecs,
|
|
- sizeof(struct fb_monspecs), GFP_KERNEL);
|
|
- if (!monspecs)
|
|
- return NULL;
|
|
-
|
|
- modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
|
|
- modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
|
|
- if (!modedb)
|
|
- goto err_dup_modedb;
|
|
- monspecs->modedb = modedb;
|
|
-
|
|
- switch (id) {
|
|
- case 0:
|
|
- pdev = &atmel_lcdfb0_device;
|
|
- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
|
|
- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
|
|
- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
|
|
- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
|
|
- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
|
|
- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
|
|
- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
|
|
- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
|
|
- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
|
|
- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
|
|
- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
|
|
- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
|
|
- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
|
|
- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
|
|
- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
|
|
- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
|
|
- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
|
|
- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
|
|
- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
|
|
- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
|
|
- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
|
|
- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
|
|
- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
|
|
- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
|
|
- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
|
|
- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
|
|
- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
|
|
- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
|
|
- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
|
|
- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
|
|
- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
|
|
-
|
|
- clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
|
|
- clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
|
|
- break;
|
|
-
|
|
- default:
|
|
- goto err_invalid_id;
|
|
- }
|
|
-
|
|
- if (fbmem_len) {
|
|
- pdev->resource[2].start = fbmem_start;
|
|
- pdev->resource[2].end = fbmem_start + fbmem_len - 1;
|
|
- pdev->resource[2].flags = IORESOURCE_MEM;
|
|
- }
|
|
-
|
|
- info = pdev->dev.platform_data;
|
|
- memcpy(info, data, sizeof(struct atmel_lcdfb_info));
|
|
- info->default_monspecs = monspecs;
|
|
-
|
|
- platform_device_register(pdev);
|
|
- return pdev;
|
|
-
|
|
-err_invalid_id:
|
|
- kfree(modedb);
|
|
-err_dup_modedb:
|
|
- kfree(monspecs);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * SSC
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource ssc0_resource[] = {
|
|
- PBMEM(0xffe01c00),
|
|
- IRQ(10),
|
|
-};
|
|
-DEFINE_DEV(ssc, 0);
|
|
-DEV_CLK(pclk, ssc0, pba, 7);
|
|
-
|
|
-static struct resource ssc1_resource[] = {
|
|
- PBMEM(0xffe02000),
|
|
- IRQ(11),
|
|
-};
|
|
-DEFINE_DEV(ssc, 1);
|
|
-DEV_CLK(pclk, ssc1, pba, 8);
|
|
-
|
|
-static struct resource ssc2_resource[] = {
|
|
- PBMEM(0xffe02400),
|
|
- IRQ(12),
|
|
-};
|
|
-DEFINE_DEV(ssc, 2);
|
|
-DEV_CLK(pclk, ssc2, pba, 9);
|
|
-
|
|
-struct platform_device *__init
|
|
-at32_add_device_ssc(unsigned int id, unsigned int flags)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- switch (id) {
|
|
- case 0:
|
|
- pdev = &ssc0_device;
|
|
- if (flags & ATMEL_SSC_RF)
|
|
- select_peripheral(PA(21), PERIPH_A, 0); /* RF */
|
|
- if (flags & ATMEL_SSC_RK)
|
|
- select_peripheral(PA(22), PERIPH_A, 0); /* RK */
|
|
- if (flags & ATMEL_SSC_TK)
|
|
- select_peripheral(PA(23), PERIPH_A, 0); /* TK */
|
|
- if (flags & ATMEL_SSC_TF)
|
|
- select_peripheral(PA(24), PERIPH_A, 0); /* TF */
|
|
- if (flags & ATMEL_SSC_TD)
|
|
- select_peripheral(PA(25), PERIPH_A, 0); /* TD */
|
|
- if (flags & ATMEL_SSC_RD)
|
|
- select_peripheral(PA(26), PERIPH_A, 0); /* RD */
|
|
- break;
|
|
- case 1:
|
|
- pdev = &ssc1_device;
|
|
- if (flags & ATMEL_SSC_RF)
|
|
- select_peripheral(PA(0), PERIPH_B, 0); /* RF */
|
|
- if (flags & ATMEL_SSC_RK)
|
|
- select_peripheral(PA(1), PERIPH_B, 0); /* RK */
|
|
- if (flags & ATMEL_SSC_TK)
|
|
- select_peripheral(PA(2), PERIPH_B, 0); /* TK */
|
|
- if (flags & ATMEL_SSC_TF)
|
|
- select_peripheral(PA(3), PERIPH_B, 0); /* TF */
|
|
- if (flags & ATMEL_SSC_TD)
|
|
- select_peripheral(PA(4), PERIPH_B, 0); /* TD */
|
|
- if (flags & ATMEL_SSC_RD)
|
|
- select_peripheral(PA(5), PERIPH_B, 0); /* RD */
|
|
- break;
|
|
- case 2:
|
|
- pdev = &ssc2_device;
|
|
- if (flags & ATMEL_SSC_TD)
|
|
- select_peripheral(PB(13), PERIPH_A, 0); /* TD */
|
|
- if (flags & ATMEL_SSC_RD)
|
|
- select_peripheral(PB(14), PERIPH_A, 0); /* RD */
|
|
- if (flags & ATMEL_SSC_TK)
|
|
- select_peripheral(PB(15), PERIPH_A, 0); /* TK */
|
|
- if (flags & ATMEL_SSC_TF)
|
|
- select_peripheral(PB(16), PERIPH_A, 0); /* TF */
|
|
- if (flags & ATMEL_SSC_RF)
|
|
- select_peripheral(PB(17), PERIPH_A, 0); /* RF */
|
|
- if (flags & ATMEL_SSC_RK)
|
|
- select_peripheral(PB(18), PERIPH_A, 0); /* RK */
|
|
- break;
|
|
- default:
|
|
- return NULL;
|
|
- }
|
|
-
|
|
- platform_device_register(pdev);
|
|
- return pdev;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * USB Device Controller
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource usba0_resource[] __initdata = {
|
|
- {
|
|
- .start = 0xff300000,
|
|
- .end = 0xff3fffff,
|
|
- .flags = IORESOURCE_MEM,
|
|
- }, {
|
|
- .start = 0xfff03000,
|
|
- .end = 0xfff033ff,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(31),
|
|
-};
|
|
-static struct clk usba0_pclk = {
|
|
- .name = "pclk",
|
|
- .parent = &pbb_clk,
|
|
- .mode = pbb_clk_mode,
|
|
- .get_rate = pbb_clk_get_rate,
|
|
- .index = 12,
|
|
-};
|
|
-static struct clk usba0_hclk = {
|
|
- .name = "hclk",
|
|
- .parent = &hsb_clk,
|
|
- .mode = hsb_clk_mode,
|
|
- .get_rate = hsb_clk_get_rate,
|
|
- .index = 6,
|
|
-};
|
|
-
|
|
-struct platform_device *__init
|
|
-at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- if (id != 0)
|
|
- return NULL;
|
|
-
|
|
- pdev = platform_device_alloc("atmel_usba_udc", 0);
|
|
- if (!pdev)
|
|
- return NULL;
|
|
-
|
|
- if (platform_device_add_resources(pdev, usba0_resource,
|
|
- ARRAY_SIZE(usba0_resource)))
|
|
- goto out_free_pdev;
|
|
-
|
|
- if (data) {
|
|
- if (platform_device_add_data(pdev, data, sizeof(*data)))
|
|
- goto out_free_pdev;
|
|
-
|
|
- if (data->vbus_pin != GPIO_PIN_NONE)
|
|
- at32_select_gpio(data->vbus_pin, 0);
|
|
- }
|
|
-
|
|
- usba0_pclk.dev = &pdev->dev;
|
|
- usba0_hclk.dev = &pdev->dev;
|
|
-
|
|
- platform_device_add(pdev);
|
|
-
|
|
- return pdev;
|
|
-
|
|
-out_free_pdev:
|
|
- platform_device_put(pdev);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * IDE / CompactFlash
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource at32_smc_cs4_resource[] __initdata = {
|
|
- {
|
|
- .start = 0x04000000,
|
|
- .end = 0x07ffffff,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(~0UL), /* Magic IRQ will be overridden */
|
|
-};
|
|
-static struct resource at32_smc_cs5_resource[] __initdata = {
|
|
- {
|
|
- .start = 0x20000000,
|
|
- .end = 0x23ffffff,
|
|
- .flags = IORESOURCE_MEM,
|
|
- },
|
|
- IRQ(~0UL), /* Magic IRQ will be overridden */
|
|
-};
|
|
-
|
|
-static int __init at32_init_ide_or_cf(struct platform_device *pdev,
|
|
- unsigned int cs, unsigned int extint)
|
|
-{
|
|
- static unsigned int extint_pin_map[4] __initdata = {
|
|
- GPIO_PIN_PB(25),
|
|
- GPIO_PIN_PB(26),
|
|
- GPIO_PIN_PB(27),
|
|
- GPIO_PIN_PB(28),
|
|
- };
|
|
- static bool common_pins_initialized __initdata = false;
|
|
- unsigned int extint_pin;
|
|
- int ret;
|
|
-
|
|
- if (extint >= ARRAY_SIZE(extint_pin_map))
|
|
- return -EINVAL;
|
|
- extint_pin = extint_pin_map[extint];
|
|
-
|
|
- switch (cs) {
|
|
- case 4:
|
|
- ret = platform_device_add_resources(pdev,
|
|
- at32_smc_cs4_resource,
|
|
- ARRAY_SIZE(at32_smc_cs4_resource));
|
|
- if (ret)
|
|
- return ret;
|
|
-
|
|
- select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
|
|
- set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
|
|
- break;
|
|
- case 5:
|
|
- ret = platform_device_add_resources(pdev,
|
|
- at32_smc_cs5_resource,
|
|
- ARRAY_SIZE(at32_smc_cs5_resource));
|
|
- if (ret)
|
|
- return ret;
|
|
-
|
|
- select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
|
|
- set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
|
|
- break;
|
|
- default:
|
|
- return -EINVAL;
|
|
- }
|
|
-
|
|
- if (!common_pins_initialized) {
|
|
- select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
|
|
- select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
|
|
- select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
|
|
- select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
|
|
- common_pins_initialized = true;
|
|
- }
|
|
-
|
|
- at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
|
|
-
|
|
- pdev->resource[1].start = EIM_IRQ_BASE + extint;
|
|
- pdev->resource[1].end = pdev->resource[1].start;
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-struct platform_device *__init
|
|
-at32_add_device_ide(unsigned int id, unsigned int extint,
|
|
- struct ide_platform_data *data)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- pdev = platform_device_alloc("at32_ide", id);
|
|
- if (!pdev)
|
|
- goto fail;
|
|
-
|
|
- if (platform_device_add_data(pdev, data,
|
|
- sizeof(struct ide_platform_data)))
|
|
- goto fail;
|
|
-
|
|
- if (at32_init_ide_or_cf(pdev, data->cs, extint))
|
|
- goto fail;
|
|
-
|
|
- platform_device_add(pdev);
|
|
- return pdev;
|
|
-
|
|
-fail:
|
|
- platform_device_put(pdev);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-struct platform_device *__init
|
|
-at32_add_device_cf(unsigned int id, unsigned int extint,
|
|
- struct cf_platform_data *data)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- pdev = platform_device_alloc("at32_cf", id);
|
|
- if (!pdev)
|
|
- goto fail;
|
|
-
|
|
- if (platform_device_add_data(pdev, data,
|
|
- sizeof(struct cf_platform_data)))
|
|
- goto fail;
|
|
-
|
|
- if (at32_init_ide_or_cf(pdev, data->cs, extint))
|
|
- goto fail;
|
|
-
|
|
- if (data->detect_pin != GPIO_PIN_NONE)
|
|
- at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
|
|
- if (data->reset_pin != GPIO_PIN_NONE)
|
|
- at32_select_gpio(data->reset_pin, 0);
|
|
- if (data->vcc_pin != GPIO_PIN_NONE)
|
|
- at32_select_gpio(data->vcc_pin, 0);
|
|
- /* READY is used as extint, so we can't select it as gpio */
|
|
-
|
|
- platform_device_add(pdev);
|
|
- return pdev;
|
|
-
|
|
-fail:
|
|
- platform_device_put(pdev);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * AC97C
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource atmel_ac97c0_resource[] __initdata = {
|
|
- PBMEM(0xfff02800),
|
|
- IRQ(29),
|
|
-};
|
|
-static struct clk atmel_ac97c0_pclk = {
|
|
- .name = "pclk",
|
|
- .parent = &pbb_clk,
|
|
- .mode = pbb_clk_mode,
|
|
- .get_rate = pbb_clk_get_rate,
|
|
- .index = 10,
|
|
-};
|
|
-
|
|
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- if (id != 0)
|
|
- return NULL;
|
|
-
|
|
- pdev = platform_device_alloc("atmel_ac97c", id);
|
|
- if (!pdev)
|
|
- return NULL;
|
|
-
|
|
- if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
|
|
- ARRAY_SIZE(atmel_ac97c0_resource)))
|
|
- goto err_add_resources;
|
|
-
|
|
- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
|
|
- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
|
|
- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
|
|
- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
|
|
-
|
|
- atmel_ac97c0_pclk.dev = &pdev->dev;
|
|
-
|
|
- platform_device_add(pdev);
|
|
- return pdev;
|
|
-
|
|
-err_add_resources:
|
|
- platform_device_put(pdev);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * ABDAC
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct resource abdac0_resource[] __initdata = {
|
|
- PBMEM(0xfff02000),
|
|
- IRQ(27),
|
|
-};
|
|
-static struct clk abdac0_pclk = {
|
|
- .name = "pclk",
|
|
- .parent = &pbb_clk,
|
|
- .mode = pbb_clk_mode,
|
|
- .get_rate = pbb_clk_get_rate,
|
|
- .index = 8,
|
|
-};
|
|
-static struct clk abdac0_sample_clk = {
|
|
- .name = "sample_clk",
|
|
- .mode = genclk_mode,
|
|
- .get_rate = genclk_get_rate,
|
|
- .set_rate = genclk_set_rate,
|
|
- .set_parent = genclk_set_parent,
|
|
- .index = 6,
|
|
-};
|
|
-
|
|
-struct platform_device *__init at32_add_device_abdac(unsigned int id)
|
|
-{
|
|
- struct platform_device *pdev;
|
|
-
|
|
- if (id != 0)
|
|
- return NULL;
|
|
-
|
|
- pdev = platform_device_alloc("abdac", id);
|
|
- if (!pdev)
|
|
- return NULL;
|
|
-
|
|
- if (platform_device_add_resources(pdev, abdac0_resource,
|
|
- ARRAY_SIZE(abdac0_resource)))
|
|
- goto err_add_resources;
|
|
-
|
|
- select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
|
|
- select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
|
|
- select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
|
|
- select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
|
|
-
|
|
- abdac0_pclk.dev = &pdev->dev;
|
|
- abdac0_sample_clk.dev = &pdev->dev;
|
|
-
|
|
- platform_device_add(pdev);
|
|
- return pdev;
|
|
-
|
|
-err_add_resources:
|
|
- platform_device_put(pdev);
|
|
- return NULL;
|
|
-}
|
|
-
|
|
-/* --------------------------------------------------------------------
|
|
- * GCLK
|
|
- * -------------------------------------------------------------------- */
|
|
-static struct clk gclk0 = {
|
|
- .name = "gclk0",
|
|
- .mode = genclk_mode,
|
|
- .get_rate = genclk_get_rate,
|
|
- .set_rate = genclk_set_rate,
|
|
- .set_parent = genclk_set_parent,
|
|
- .index = 0,
|
|
-};
|
|
-static struct clk gclk1 = {
|
|
- .name = "gclk1",
|
|
- .mode = genclk_mode,
|
|
- .get_rate = genclk_get_rate,
|
|
- .set_rate = genclk_set_rate,
|
|
- .set_parent = genclk_set_parent,
|
|
- .index = 1,
|
|
-};
|
|
-static struct clk gclk2 = {
|
|
- .name = "gclk2",
|
|
- .mode = genclk_mode,
|
|
- .get_rate = genclk_get_rate,
|
|
- .set_rate = genclk_set_rate,
|
|
- .set_parent = genclk_set_parent,
|
|
- .index = 2,
|
|
-};
|
|
-static struct clk gclk3 = {
|
|
- .name = "gclk3",
|
|
- .mode = genclk_mode,
|
|
- .get_rate = genclk_get_rate,
|
|
- .set_rate = genclk_set_rate,
|
|
- .set_parent = genclk_set_parent,
|
|
- .index = 3,
|
|
-};
|
|
-static struct clk gclk4 = {
|
|
- .name = "gclk4",
|
|
- .mode = genclk_mode,
|
|
- .get_rate = genclk_get_rate,
|
|
- .set_rate = genclk_set_rate,
|
|
- .set_parent = genclk_set_parent,
|
|
- .index = 4,
|
|
-};
|
|
-
|
|
-struct clk *at32_clock_list[] = {
|
|
- &osc32k,
|
|
- &osc0,
|
|
- &osc1,
|
|
- &pll0,
|
|
- &pll1,
|
|
- &cpu_clk,
|
|
- &hsb_clk,
|
|
- &pba_clk,
|
|
- &pbb_clk,
|
|
- &at32_pm_pclk,
|
|
- &at32_intc0_pclk,
|
|
- &hmatrix_clk,
|
|
- &ebi_clk,
|
|
- &hramc_clk,
|
|
- &smc0_pclk,
|
|
- &smc0_mck,
|
|
- &pdc_hclk,
|
|
- &pdc_pclk,
|
|
- &dmaca0_hclk,
|
|
- &pico_clk,
|
|
- &pio0_mck,
|
|
- &pio1_mck,
|
|
- &pio2_mck,
|
|
- &pio3_mck,
|
|
- &pio4_mck,
|
|
- &at32_systc0_pclk,
|
|
- &atmel_usart0_usart,
|
|
- &atmel_usart1_usart,
|
|
- &atmel_usart2_usart,
|
|
- &atmel_usart3_usart,
|
|
- &macb0_hclk,
|
|
- &macb0_pclk,
|
|
- &macb1_hclk,
|
|
- &macb1_pclk,
|
|
- &atmel_spi0_spi_clk,
|
|
- &atmel_spi1_spi_clk,
|
|
- &atmel_twi0_pclk,
|
|
- &atmel_mci0_pclk,
|
|
- &atmel_lcdfb0_hck1,
|
|
- &atmel_lcdfb0_pixclk,
|
|
- &ssc0_pclk,
|
|
- &ssc1_pclk,
|
|
- &ssc2_pclk,
|
|
- &usba0_hclk,
|
|
- &usba0_pclk,
|
|
- &atmel_ac97c0_pclk,
|
|
- &abdac0_pclk,
|
|
- &abdac0_sample_clk,
|
|
- &gclk0,
|
|
- &gclk1,
|
|
- &gclk2,
|
|
- &gclk3,
|
|
- &gclk4,
|
|
-};
|
|
-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
|
|
-
|
|
-void __init at32_portmux_init(void)
|
|
-{
|
|
- at32_init_pio(&pio0_device);
|
|
- at32_init_pio(&pio1_device);
|
|
- at32_init_pio(&pio2_device);
|
|
- at32_init_pio(&pio3_device);
|
|
- at32_init_pio(&pio4_device);
|
|
-}
|
|
-
|
|
-void __init at32_clock_init(void)
|
|
-{
|
|
- u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
|
|
- int i;
|
|
-
|
|
- if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
|
|
- main_clock = &pll0;
|
|
- cpu_clk.parent = &pll0;
|
|
- } else {
|
|
- main_clock = &osc0;
|
|
- cpu_clk.parent = &osc0;
|
|
- }
|
|
-
|
|
- if (pm_readl(PLL0) & PM_BIT(PLLOSC))
|
|
- pll0.parent = &osc1;
|
|
- if (pm_readl(PLL1) & PM_BIT(PLLOSC))
|
|
- pll1.parent = &osc1;
|
|
-
|
|
- genclk_init_parent(&gclk0);
|
|
- genclk_init_parent(&gclk1);
|
|
- genclk_init_parent(&gclk2);
|
|
- genclk_init_parent(&gclk3);
|
|
- genclk_init_parent(&gclk4);
|
|
- genclk_init_parent(&atmel_lcdfb0_pixclk);
|
|
- genclk_init_parent(&abdac0_sample_clk);
|
|
-
|
|
- /*
|
|
- * Turn on all clocks that have at least one user already, and
|
|
- * turn off everything else. We only do this for module
|
|
- * clocks, and even though it isn't particularly pretty to
|
|
- * check the address of the mode function, it should do the
|
|
- * trick...
|
|
- */
|
|
- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
|
|
- struct clk *clk = at32_clock_list[i];
|
|
-
|
|
- if (clk->users == 0)
|
|
- continue;
|
|
-
|
|
- if (clk->mode == &cpu_clk_mode)
|
|
- cpu_mask |= 1 << clk->index;
|
|
- else if (clk->mode == &hsb_clk_mode)
|
|
- hsb_mask |= 1 << clk->index;
|
|
- else if (clk->mode == &pba_clk_mode)
|
|
- pba_mask |= 1 << clk->index;
|
|
- else if (clk->mode == &pbb_clk_mode)
|
|
- pbb_mask |= 1 << clk->index;
|
|
- }
|
|
-
|
|
- pm_writel(CPU_MASK, cpu_mask);
|
|
- pm_writel(HSB_MASK, hsb_mask);
|
|
- pm_writel(PBA_MASK, pba_mask);
|
|
- pm_writel(PBB_MASK, pbb_mask);
|
|
-}
|
|
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
|
|
new file mode 100644
|
|
index 0000000..06795d0
|
|
--- /dev/null
|
|
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
|
|
@@ -0,0 +1,1809 @@
|
|
+/*
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/clk.h>
|
|
+#include <linux/fb.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/spi/spi.h>
|
|
+
|
|
+#include <asm/io.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/arch/at32ap700x.h>
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/portmux.h>
|
|
+
|
|
+#include <video/atmel_lcdc.h>
|
|
+
|
|
+#include "clock.h"
|
|
+#include "hmatrix.h"
|
|
+#include "pio.h"
|
|
+#include "pm.h"
|
|
+
|
|
+
|
|
+#define PBMEM(base) \
|
|
+ { \
|
|
+ .start = base, \
|
|
+ .end = base + 0x3ff, \
|
|
+ .flags = IORESOURCE_MEM, \
|
|
+ }
|
|
+#define IRQ(num) \
|
|
+ { \
|
|
+ .start = num, \
|
|
+ .end = num, \
|
|
+ .flags = IORESOURCE_IRQ, \
|
|
+ }
|
|
+#define NAMED_IRQ(num, _name) \
|
|
+ { \
|
|
+ .start = num, \
|
|
+ .end = num, \
|
|
+ .name = _name, \
|
|
+ .flags = IORESOURCE_IRQ, \
|
|
+ }
|
|
+
|
|
+/* REVISIT these assume *every* device supports DMA, but several
|
|
+ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
|
|
+ */
|
|
+#define DEFINE_DEV(_name, _id) \
|
|
+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
|
|
+static struct platform_device _name##_id##_device = { \
|
|
+ .name = #_name, \
|
|
+ .id = _id, \
|
|
+ .dev = { \
|
|
+ .dma_mask = &_name##_id##_dma_mask, \
|
|
+ .coherent_dma_mask = DMA_32BIT_MASK, \
|
|
+ }, \
|
|
+ .resource = _name##_id##_resource, \
|
|
+ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
|
|
+}
|
|
+#define DEFINE_DEV_DATA(_name, _id) \
|
|
+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK; \
|
|
+static struct platform_device _name##_id##_device = { \
|
|
+ .name = #_name, \
|
|
+ .id = _id, \
|
|
+ .dev = { \
|
|
+ .dma_mask = &_name##_id##_dma_mask, \
|
|
+ .platform_data = &_name##_id##_data, \
|
|
+ .coherent_dma_mask = DMA_32BIT_MASK, \
|
|
+ }, \
|
|
+ .resource = _name##_id##_resource, \
|
|
+ .num_resources = ARRAY_SIZE(_name##_id##_resource), \
|
|
+}
|
|
+
|
|
+#define select_peripheral(pin, periph, flags) \
|
|
+ at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
|
|
+
|
|
+#define DEV_CLK(_name, devname, bus, _index) \
|
|
+static struct clk devname##_##_name = { \
|
|
+ .name = #_name, \
|
|
+ .dev = &devname##_device.dev, \
|
|
+ .parent = &bus##_clk, \
|
|
+ .mode = bus##_clk_mode, \
|
|
+ .get_rate = bus##_clk_get_rate, \
|
|
+ .index = _index, \
|
|
+}
|
|
+
|
|
+static DEFINE_SPINLOCK(pm_lock);
|
|
+
|
|
+unsigned long at32ap7000_osc_rates[3] = {
|
|
+ [0] = 32768,
|
|
+ /* FIXME: these are ATSTK1002-specific */
|
|
+ [1] = 20000000,
|
|
+ [2] = 12000000,
|
|
+};
|
|
+
|
|
+static unsigned long osc_get_rate(struct clk *clk)
|
|
+{
|
|
+ return at32ap7000_osc_rates[clk->index];
|
|
+}
|
|
+
|
|
+static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
|
|
+{
|
|
+ unsigned long div, mul, rate;
|
|
+
|
|
+ if (!(control & PM_BIT(PLLEN)))
|
|
+ return 0;
|
|
+
|
|
+ div = PM_BFEXT(PLLDIV, control) + 1;
|
|
+ mul = PM_BFEXT(PLLMUL, control) + 1;
|
|
+
|
|
+ rate = clk->parent->get_rate(clk->parent);
|
|
+ rate = (rate + div / 2) / div;
|
|
+ rate *= mul;
|
|
+
|
|
+ return rate;
|
|
+}
|
|
+
|
|
+static unsigned long pll0_get_rate(struct clk *clk)
|
|
+{
|
|
+ u32 control;
|
|
+
|
|
+ control = pm_readl(PLL0);
|
|
+
|
|
+ return pll_get_rate(clk, control);
|
|
+}
|
|
+
|
|
+static unsigned long pll1_get_rate(struct clk *clk)
|
|
+{
|
|
+ u32 control;
|
|
+
|
|
+ control = pm_readl(PLL1);
|
|
+
|
|
+ return pll_get_rate(clk, control);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * The AT32AP7000 has five primary clock sources: One 32kHz
|
|
+ * oscillator, two crystal oscillators and two PLLs.
|
|
+ */
|
|
+static struct clk osc32k = {
|
|
+ .name = "osc32k",
|
|
+ .get_rate = osc_get_rate,
|
|
+ .users = 1,
|
|
+ .index = 0,
|
|
+};
|
|
+static struct clk osc0 = {
|
|
+ .name = "osc0",
|
|
+ .get_rate = osc_get_rate,
|
|
+ .users = 1,
|
|
+ .index = 1,
|
|
+};
|
|
+static struct clk osc1 = {
|
|
+ .name = "osc1",
|
|
+ .get_rate = osc_get_rate,
|
|
+ .index = 2,
|
|
+};
|
|
+static struct clk pll0 = {
|
|
+ .name = "pll0",
|
|
+ .get_rate = pll0_get_rate,
|
|
+ .parent = &osc0,
|
|
+};
|
|
+static struct clk pll1 = {
|
|
+ .name = "pll1",
|
|
+ .get_rate = pll1_get_rate,
|
|
+ .parent = &osc0,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * The main clock can be either osc0 or pll0. The boot loader may
|
|
+ * have chosen one for us, so we don't really know which one until we
|
|
+ * have a look at the SM.
|
|
+ */
|
|
+static struct clk *main_clock;
|
|
+
|
|
+/*
|
|
+ * Synchronous clocks are generated from the main clock. The clocks
|
|
+ * must satisfy the constraint
|
|
+ * fCPU >= fHSB >= fPB
|
|
+ * i.e. each clock must not be faster than its parent.
|
|
+ */
|
|
+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
|
|
+{
|
|
+ return main_clock->get_rate(main_clock) >> shift;
|
|
+};
|
|
+
|
|
+static void cpu_clk_mode(struct clk *clk, int enabled)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u32 mask;
|
|
+
|
|
+ spin_lock_irqsave(&pm_lock, flags);
|
|
+ mask = pm_readl(CPU_MASK);
|
|
+ if (enabled)
|
|
+ mask |= 1 << clk->index;
|
|
+ else
|
|
+ mask &= ~(1 << clk->index);
|
|
+ pm_writel(CPU_MASK, mask);
|
|
+ spin_unlock_irqrestore(&pm_lock, flags);
|
|
+}
|
|
+
|
|
+static unsigned long cpu_clk_get_rate(struct clk *clk)
|
|
+{
|
|
+ unsigned long cksel, shift = 0;
|
|
+
|
|
+ cksel = pm_readl(CKSEL);
|
|
+ if (cksel & PM_BIT(CPUDIV))
|
|
+ shift = PM_BFEXT(CPUSEL, cksel) + 1;
|
|
+
|
|
+ return bus_clk_get_rate(clk, shift);
|
|
+}
|
|
+
|
|
+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
|
|
+{
|
|
+ u32 control;
|
|
+ unsigned long parent_rate, child_div, actual_rate, div;
|
|
+
|
|
+ parent_rate = clk->parent->get_rate(clk->parent);
|
|
+ control = pm_readl(CKSEL);
|
|
+
|
|
+ if (control & PM_BIT(HSBDIV))
|
|
+ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
|
|
+ else
|
|
+ child_div = 1;
|
|
+
|
|
+ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
|
|
+ actual_rate = parent_rate;
|
|
+ control &= ~PM_BIT(CPUDIV);
|
|
+ } else {
|
|
+ unsigned int cpusel;
|
|
+ div = (parent_rate + rate / 2) / rate;
|
|
+ if (div > child_div)
|
|
+ div = child_div;
|
|
+ cpusel = (div > 1) ? (fls(div) - 2) : 0;
|
|
+ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
|
|
+ actual_rate = parent_rate / (1 << (cpusel + 1));
|
|
+ }
|
|
+
|
|
+ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
|
|
+ clk->name, rate, actual_rate);
|
|
+
|
|
+ if (apply)
|
|
+ pm_writel(CKSEL, control);
|
|
+
|
|
+ return actual_rate;
|
|
+}
|
|
+
|
|
+static void hsb_clk_mode(struct clk *clk, int enabled)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u32 mask;
|
|
+
|
|
+ spin_lock_irqsave(&pm_lock, flags);
|
|
+ mask = pm_readl(HSB_MASK);
|
|
+ if (enabled)
|
|
+ mask |= 1 << clk->index;
|
|
+ else
|
|
+ mask &= ~(1 << clk->index);
|
|
+ pm_writel(HSB_MASK, mask);
|
|
+ spin_unlock_irqrestore(&pm_lock, flags);
|
|
+}
|
|
+
|
|
+static unsigned long hsb_clk_get_rate(struct clk *clk)
|
|
+{
|
|
+ unsigned long cksel, shift = 0;
|
|
+
|
|
+ cksel = pm_readl(CKSEL);
|
|
+ if (cksel & PM_BIT(HSBDIV))
|
|
+ shift = PM_BFEXT(HSBSEL, cksel) + 1;
|
|
+
|
|
+ return bus_clk_get_rate(clk, shift);
|
|
+}
|
|
+
|
|
+static void pba_clk_mode(struct clk *clk, int enabled)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u32 mask;
|
|
+
|
|
+ spin_lock_irqsave(&pm_lock, flags);
|
|
+ mask = pm_readl(PBA_MASK);
|
|
+ if (enabled)
|
|
+ mask |= 1 << clk->index;
|
|
+ else
|
|
+ mask &= ~(1 << clk->index);
|
|
+ pm_writel(PBA_MASK, mask);
|
|
+ spin_unlock_irqrestore(&pm_lock, flags);
|
|
+}
|
|
+
|
|
+static unsigned long pba_clk_get_rate(struct clk *clk)
|
|
+{
|
|
+ unsigned long cksel, shift = 0;
|
|
+
|
|
+ cksel = pm_readl(CKSEL);
|
|
+ if (cksel & PM_BIT(PBADIV))
|
|
+ shift = PM_BFEXT(PBASEL, cksel) + 1;
|
|
+
|
|
+ return bus_clk_get_rate(clk, shift);
|
|
+}
|
|
+
|
|
+static void pbb_clk_mode(struct clk *clk, int enabled)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u32 mask;
|
|
+
|
|
+ spin_lock_irqsave(&pm_lock, flags);
|
|
+ mask = pm_readl(PBB_MASK);
|
|
+ if (enabled)
|
|
+ mask |= 1 << clk->index;
|
|
+ else
|
|
+ mask &= ~(1 << clk->index);
|
|
+ pm_writel(PBB_MASK, mask);
|
|
+ spin_unlock_irqrestore(&pm_lock, flags);
|
|
+}
|
|
+
|
|
+static unsigned long pbb_clk_get_rate(struct clk *clk)
|
|
+{
|
|
+ unsigned long cksel, shift = 0;
|
|
+
|
|
+ cksel = pm_readl(CKSEL);
|
|
+ if (cksel & PM_BIT(PBBDIV))
|
|
+ shift = PM_BFEXT(PBBSEL, cksel) + 1;
|
|
+
|
|
+ return bus_clk_get_rate(clk, shift);
|
|
+}
|
|
+
|
|
+static struct clk cpu_clk = {
|
|
+ .name = "cpu",
|
|
+ .get_rate = cpu_clk_get_rate,
|
|
+ .set_rate = cpu_clk_set_rate,
|
|
+ .users = 1,
|
|
+};
|
|
+static struct clk hsb_clk = {
|
|
+ .name = "hsb",
|
|
+ .parent = &cpu_clk,
|
|
+ .get_rate = hsb_clk_get_rate,
|
|
+};
|
|
+static struct clk pba_clk = {
|
|
+ .name = "pba",
|
|
+ .parent = &hsb_clk,
|
|
+ .mode = hsb_clk_mode,
|
|
+ .get_rate = pba_clk_get_rate,
|
|
+ .index = 1,
|
|
+};
|
|
+static struct clk pbb_clk = {
|
|
+ .name = "pbb",
|
|
+ .parent = &hsb_clk,
|
|
+ .mode = hsb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .users = 1,
|
|
+ .index = 2,
|
|
+};
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Generic Clock operations
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static void genclk_mode(struct clk *clk, int enabled)
|
|
+{
|
|
+ u32 control;
|
|
+
|
|
+ control = pm_readl(GCCTRL(clk->index));
|
|
+ if (enabled)
|
|
+ control |= PM_BIT(CEN);
|
|
+ else
|
|
+ control &= ~PM_BIT(CEN);
|
|
+ pm_writel(GCCTRL(clk->index), control);
|
|
+}
|
|
+
|
|
+static unsigned long genclk_get_rate(struct clk *clk)
|
|
+{
|
|
+ u32 control;
|
|
+ unsigned long div = 1;
|
|
+
|
|
+ control = pm_readl(GCCTRL(clk->index));
|
|
+ if (control & PM_BIT(DIVEN))
|
|
+ div = 2 * (PM_BFEXT(DIV, control) + 1);
|
|
+
|
|
+ return clk->parent->get_rate(clk->parent) / div;
|
|
+}
|
|
+
|
|
+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
|
|
+{
|
|
+ u32 control;
|
|
+ unsigned long parent_rate, actual_rate, div;
|
|
+
|
|
+ parent_rate = clk->parent->get_rate(clk->parent);
|
|
+ control = pm_readl(GCCTRL(clk->index));
|
|
+
|
|
+ if (rate > 3 * parent_rate / 4) {
|
|
+ actual_rate = parent_rate;
|
|
+ control &= ~PM_BIT(DIVEN);
|
|
+ } else {
|
|
+ div = (parent_rate + rate) / (2 * rate) - 1;
|
|
+ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
|
|
+ actual_rate = parent_rate / (2 * (div + 1));
|
|
+ }
|
|
+
|
|
+ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
|
|
+ clk->name, rate, actual_rate);
|
|
+
|
|
+ if (apply)
|
|
+ pm_writel(GCCTRL(clk->index), control);
|
|
+
|
|
+ return actual_rate;
|
|
+}
|
|
+
|
|
+int genclk_set_parent(struct clk *clk, struct clk *parent)
|
|
+{
|
|
+ u32 control;
|
|
+
|
|
+ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
|
|
+ clk->name, parent->name, clk->parent->name);
|
|
+
|
|
+ control = pm_readl(GCCTRL(clk->index));
|
|
+
|
|
+ if (parent == &osc1 || parent == &pll1)
|
|
+ control |= PM_BIT(OSCSEL);
|
|
+ else if (parent == &osc0 || parent == &pll0)
|
|
+ control &= ~PM_BIT(OSCSEL);
|
|
+ else
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (parent == &pll0 || parent == &pll1)
|
|
+ control |= PM_BIT(PLLSEL);
|
|
+ else
|
|
+ control &= ~PM_BIT(PLLSEL);
|
|
+
|
|
+ pm_writel(GCCTRL(clk->index), control);
|
|
+ clk->parent = parent;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void __init genclk_init_parent(struct clk *clk)
|
|
+{
|
|
+ u32 control;
|
|
+ struct clk *parent;
|
|
+
|
|
+ BUG_ON(clk->index > 7);
|
|
+
|
|
+ control = pm_readl(GCCTRL(clk->index));
|
|
+ if (control & PM_BIT(OSCSEL))
|
|
+ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
|
|
+ else
|
|
+ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
|
|
+
|
|
+ clk->parent = parent;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * System peripherals
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource at32_pm0_resource[] = {
|
|
+ {
|
|
+ .start = 0xfff00000,
|
|
+ .end = 0xfff0007f,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(20),
|
|
+};
|
|
+
|
|
+static struct resource at32ap700x_rtc0_resource[] = {
|
|
+ {
|
|
+ .start = 0xfff00080,
|
|
+ .end = 0xfff000af,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(21),
|
|
+};
|
|
+
|
|
+static struct resource at32_wdt0_resource[] = {
|
|
+ {
|
|
+ .start = 0xfff000b0,
|
|
+ .end = 0xfff000cf,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct resource at32_eic0_resource[] = {
|
|
+ {
|
|
+ .start = 0xfff00100,
|
|
+ .end = 0xfff0013f,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(19),
|
|
+};
|
|
+
|
|
+DEFINE_DEV(at32_pm, 0);
|
|
+DEFINE_DEV(at32ap700x_rtc, 0);
|
|
+DEFINE_DEV(at32_wdt, 0);
|
|
+DEFINE_DEV(at32_eic, 0);
|
|
+
|
|
+/*
|
|
+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
|
|
+ * is always running.
|
|
+ */
|
|
+static struct clk at32_pm_pclk = {
|
|
+ .name = "pclk",
|
|
+ .dev = &at32_pm0_device.dev,
|
|
+ .parent = &pbb_clk,
|
|
+ .mode = pbb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .users = 1,
|
|
+ .index = 0,
|
|
+};
|
|
+
|
|
+static struct resource intc0_resource[] = {
|
|
+ PBMEM(0xfff00400),
|
|
+};
|
|
+struct platform_device at32_intc0_device = {
|
|
+ .name = "intc",
|
|
+ .id = 0,
|
|
+ .resource = intc0_resource,
|
|
+ .num_resources = ARRAY_SIZE(intc0_resource),
|
|
+};
|
|
+DEV_CLK(pclk, at32_intc0, pbb, 1);
|
|
+
|
|
+static struct clk ebi_clk = {
|
|
+ .name = "ebi",
|
|
+ .parent = &hsb_clk,
|
|
+ .mode = hsb_clk_mode,
|
|
+ .get_rate = hsb_clk_get_rate,
|
|
+ .users = 1,
|
|
+};
|
|
+static struct clk hramc_clk = {
|
|
+ .name = "hramc",
|
|
+ .parent = &hsb_clk,
|
|
+ .mode = hsb_clk_mode,
|
|
+ .get_rate = hsb_clk_get_rate,
|
|
+ .users = 1,
|
|
+ .index = 3,
|
|
+};
|
|
+
|
|
+static struct resource smc0_resource[] = {
|
|
+ PBMEM(0xfff03400),
|
|
+};
|
|
+DEFINE_DEV(smc, 0);
|
|
+DEV_CLK(pclk, smc0, pbb, 13);
|
|
+DEV_CLK(mck, smc0, hsb, 0);
|
|
+
|
|
+static struct platform_device pdc_device = {
|
|
+ .name = "pdc",
|
|
+ .id = 0,
|
|
+};
|
|
+DEV_CLK(hclk, pdc, hsb, 4);
|
|
+DEV_CLK(pclk, pdc, pba, 16);
|
|
+
|
|
+static struct clk pico_clk = {
|
|
+ .name = "pico",
|
|
+ .parent = &cpu_clk,
|
|
+ .mode = cpu_clk_mode,
|
|
+ .get_rate = cpu_clk_get_rate,
|
|
+ .users = 1,
|
|
+};
|
|
+
|
|
+static struct resource dmaca0_resource[] = {
|
|
+ {
|
|
+ .start = 0xff200000,
|
|
+ .end = 0xff20ffff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(2),
|
|
+};
|
|
+DEFINE_DEV(dmaca, 0);
|
|
+DEV_CLK(hclk, dmaca0, hsb, 10);
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * HMATRIX
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct clk hmatrix_clk = {
|
|
+ .name = "hmatrix_clk",
|
|
+ .parent = &pbb_clk,
|
|
+ .mode = pbb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .index = 2,
|
|
+ .users = 1,
|
|
+};
|
|
+#define HMATRIX_BASE ((void __iomem *)0xfff00800)
|
|
+
|
|
+#define hmatrix_readl(reg) \
|
|
+ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
|
|
+#define hmatrix_writel(reg,value) \
|
|
+ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
|
|
+
|
|
+/*
|
|
+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
|
|
+ * External Bus Interface (EBI). This can be used to enable special
|
|
+ * features like CompactFlash support, NAND Flash support, etc. on
|
|
+ * certain chipselects.
|
|
+ */
|
|
+static inline void set_ebi_sfr_bits(u32 mask)
|
|
+{
|
|
+ u32 sfr;
|
|
+
|
|
+ clk_enable(&hmatrix_clk);
|
|
+ sfr = hmatrix_readl(SFR4);
|
|
+ sfr |= mask;
|
|
+ hmatrix_writel(SFR4, sfr);
|
|
+ clk_disable(&hmatrix_clk);
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * System Timer/Counter (TC)
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource at32_systc0_resource[] = {
|
|
+ PBMEM(0xfff00c00),
|
|
+ IRQ(22),
|
|
+};
|
|
+struct platform_device at32_systc0_device = {
|
|
+ .name = "systc",
|
|
+ .id = 0,
|
|
+ .resource = at32_systc0_resource,
|
|
+ .num_resources = ARRAY_SIZE(at32_systc0_resource),
|
|
+};
|
|
+DEV_CLK(pclk, at32_systc0, pbb, 3);
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * PIO
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct resource pio0_resource[] = {
|
|
+ PBMEM(0xffe02800),
|
|
+ IRQ(13),
|
|
+};
|
|
+DEFINE_DEV(pio, 0);
|
|
+DEV_CLK(mck, pio0, pba, 10);
|
|
+
|
|
+static struct resource pio1_resource[] = {
|
|
+ PBMEM(0xffe02c00),
|
|
+ IRQ(14),
|
|
+};
|
|
+DEFINE_DEV(pio, 1);
|
|
+DEV_CLK(mck, pio1, pba, 11);
|
|
+
|
|
+static struct resource pio2_resource[] = {
|
|
+ PBMEM(0xffe03000),
|
|
+ IRQ(15),
|
|
+};
|
|
+DEFINE_DEV(pio, 2);
|
|
+DEV_CLK(mck, pio2, pba, 12);
|
|
+
|
|
+static struct resource pio3_resource[] = {
|
|
+ PBMEM(0xffe03400),
|
|
+ IRQ(16),
|
|
+};
|
|
+DEFINE_DEV(pio, 3);
|
|
+DEV_CLK(mck, pio3, pba, 13);
|
|
+
|
|
+static struct resource pio4_resource[] = {
|
|
+ PBMEM(0xffe03800),
|
|
+ IRQ(17),
|
|
+};
|
|
+DEFINE_DEV(pio, 4);
|
|
+DEV_CLK(mck, pio4, pba, 14);
|
|
+
|
|
+void __init at32_add_system_devices(void)
|
|
+{
|
|
+ platform_device_register(&at32_pm0_device);
|
|
+ platform_device_register(&at32_intc0_device);
|
|
+ platform_device_register(&at32ap700x_rtc0_device);
|
|
+ platform_device_register(&at32_wdt0_device);
|
|
+ platform_device_register(&at32_eic0_device);
|
|
+ platform_device_register(&smc0_device);
|
|
+ platform_device_register(&pdc_device);
|
|
+ platform_device_register(&dmaca0_device);
|
|
+
|
|
+ platform_device_register(&at32_systc0_device);
|
|
+
|
|
+ platform_device_register(&pio0_device);
|
|
+ platform_device_register(&pio1_device);
|
|
+ platform_device_register(&pio2_device);
|
|
+ platform_device_register(&pio3_device);
|
|
+ platform_device_register(&pio4_device);
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * USART
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct atmel_uart_data atmel_usart0_data = {
|
|
+ .use_dma_tx = 1,
|
|
+ .use_dma_rx = 1,
|
|
+};
|
|
+static struct resource atmel_usart0_resource[] = {
|
|
+ PBMEM(0xffe00c00),
|
|
+ IRQ(6),
|
|
+};
|
|
+DEFINE_DEV_DATA(atmel_usart, 0);
|
|
+DEV_CLK(usart, atmel_usart0, pba, 3);
|
|
+
|
|
+static struct atmel_uart_data atmel_usart1_data = {
|
|
+ .use_dma_tx = 1,
|
|
+ .use_dma_rx = 1,
|
|
+};
|
|
+static struct resource atmel_usart1_resource[] = {
|
|
+ PBMEM(0xffe01000),
|
|
+ IRQ(7),
|
|
+};
|
|
+DEFINE_DEV_DATA(atmel_usart, 1);
|
|
+DEV_CLK(usart, atmel_usart1, pba, 4);
|
|
+
|
|
+static struct atmel_uart_data atmel_usart2_data = {
|
|
+ .use_dma_tx = 1,
|
|
+ .use_dma_rx = 1,
|
|
+};
|
|
+static struct resource atmel_usart2_resource[] = {
|
|
+ PBMEM(0xffe01400),
|
|
+ IRQ(8),
|
|
+};
|
|
+DEFINE_DEV_DATA(atmel_usart, 2);
|
|
+DEV_CLK(usart, atmel_usart2, pba, 5);
|
|
+
|
|
+static struct atmel_uart_data atmel_usart3_data = {
|
|
+ .use_dma_tx = 1,
|
|
+ .use_dma_rx = 1,
|
|
+};
|
|
+static struct resource atmel_usart3_resource[] = {
|
|
+ PBMEM(0xffe01800),
|
|
+ IRQ(9),
|
|
+};
|
|
+DEFINE_DEV_DATA(atmel_usart, 3);
|
|
+DEV_CLK(usart, atmel_usart3, pba, 6);
|
|
+
|
|
+static inline void configure_usart0_pins(void)
|
|
+{
|
|
+ select_peripheral(PA(8), PERIPH_B, 0); /* RXD */
|
|
+ select_peripheral(PA(9), PERIPH_B, 0); /* TXD */
|
|
+}
|
|
+
|
|
+static inline void configure_usart1_pins(void)
|
|
+{
|
|
+ select_peripheral(PA(17), PERIPH_A, 0); /* RXD */
|
|
+ select_peripheral(PA(18), PERIPH_A, 0); /* TXD */
|
|
+}
|
|
+
|
|
+static inline void configure_usart2_pins(void)
|
|
+{
|
|
+ select_peripheral(PB(26), PERIPH_B, 0); /* RXD */
|
|
+ select_peripheral(PB(27), PERIPH_B, 0); /* TXD */
|
|
+}
|
|
+
|
|
+static inline void configure_usart3_pins(void)
|
|
+{
|
|
+ select_peripheral(PB(18), PERIPH_B, 0); /* RXD */
|
|
+ select_peripheral(PB(17), PERIPH_B, 0); /* TXD */
|
|
+}
|
|
+
|
|
+static struct platform_device *__initdata at32_usarts[4];
|
|
+
|
|
+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (hw_id) {
|
|
+ case 0:
|
|
+ pdev = &atmel_usart0_device;
|
|
+ configure_usart0_pins();
|
|
+ break;
|
|
+ case 1:
|
|
+ pdev = &atmel_usart1_device;
|
|
+ configure_usart1_pins();
|
|
+ break;
|
|
+ case 2:
|
|
+ pdev = &atmel_usart2_device;
|
|
+ configure_usart2_pins();
|
|
+ break;
|
|
+ case 3:
|
|
+ pdev = &atmel_usart3_device;
|
|
+ configure_usart3_pins();
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ if (PXSEG(pdev->resource[0].start) == P4SEG) {
|
|
+ /* Addresses in the P4 segment are permanently mapped 1:1 */
|
|
+ struct atmel_uart_data *data = pdev->dev.platform_data;
|
|
+ data->regs = (void __iomem *)pdev->resource[0].start;
|
|
+ }
|
|
+
|
|
+ pdev->id = line;
|
|
+ at32_usarts[line] = pdev;
|
|
+}
|
|
+
|
|
+struct platform_device *__init at32_add_device_usart(unsigned int id)
|
|
+{
|
|
+ platform_device_register(at32_usarts[id]);
|
|
+ return at32_usarts[id];
|
|
+}
|
|
+
|
|
+struct platform_device *atmel_default_console_device;
|
|
+
|
|
+void __init at32_setup_serial_console(unsigned int usart_id)
|
|
+{
|
|
+ atmel_default_console_device = at32_usarts[usart_id];
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Ethernet
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#ifdef CONFIG_CPU_AT32AP7000
|
|
+static struct eth_platform_data macb0_data;
|
|
+static struct resource macb0_resource[] = {
|
|
+ PBMEM(0xfff01800),
|
|
+ IRQ(25),
|
|
+};
|
|
+DEFINE_DEV_DATA(macb, 0);
|
|
+DEV_CLK(hclk, macb0, hsb, 8);
|
|
+DEV_CLK(pclk, macb0, pbb, 6);
|
|
+
|
|
+static struct eth_platform_data macb1_data;
|
|
+static struct resource macb1_resource[] = {
|
|
+ PBMEM(0xfff01c00),
|
|
+ IRQ(26),
|
|
+};
|
|
+DEFINE_DEV_DATA(macb, 1);
|
|
+DEV_CLK(hclk, macb1, hsb, 9);
|
|
+DEV_CLK(pclk, macb1, pbb, 7);
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0:
|
|
+ pdev = &macb0_device;
|
|
+
|
|
+ select_peripheral(PC(3), PERIPH_A, 0); /* TXD0 */
|
|
+ select_peripheral(PC(4), PERIPH_A, 0); /* TXD1 */
|
|
+ select_peripheral(PC(7), PERIPH_A, 0); /* TXEN */
|
|
+ select_peripheral(PC(8), PERIPH_A, 0); /* TXCK */
|
|
+ select_peripheral(PC(9), PERIPH_A, 0); /* RXD0 */
|
|
+ select_peripheral(PC(10), PERIPH_A, 0); /* RXD1 */
|
|
+ select_peripheral(PC(13), PERIPH_A, 0); /* RXER */
|
|
+ select_peripheral(PC(15), PERIPH_A, 0); /* RXDV */
|
|
+ select_peripheral(PC(16), PERIPH_A, 0); /* MDC */
|
|
+ select_peripheral(PC(17), PERIPH_A, 0); /* MDIO */
|
|
+
|
|
+ if (!data->is_rmii) {
|
|
+ select_peripheral(PC(0), PERIPH_A, 0); /* COL */
|
|
+ select_peripheral(PC(1), PERIPH_A, 0); /* CRS */
|
|
+ select_peripheral(PC(2), PERIPH_A, 0); /* TXER */
|
|
+ select_peripheral(PC(5), PERIPH_A, 0); /* TXD2 */
|
|
+ select_peripheral(PC(6), PERIPH_A, 0); /* TXD3 */
|
|
+ select_peripheral(PC(11), PERIPH_A, 0); /* RXD2 */
|
|
+ select_peripheral(PC(12), PERIPH_A, 0); /* RXD3 */
|
|
+ select_peripheral(PC(14), PERIPH_A, 0); /* RXCK */
|
|
+ select_peripheral(PC(18), PERIPH_A, 0); /* SPD */
|
|
+ }
|
|
+ break;
|
|
+
|
|
+ case 1:
|
|
+ pdev = &macb1_device;
|
|
+
|
|
+ select_peripheral(PD(13), PERIPH_B, 0); /* TXD0 */
|
|
+ select_peripheral(PD(14), PERIPH_B, 0); /* TXD1 */
|
|
+ select_peripheral(PD(11), PERIPH_B, 0); /* TXEN */
|
|
+ select_peripheral(PD(12), PERIPH_B, 0); /* TXCK */
|
|
+ select_peripheral(PD(10), PERIPH_B, 0); /* RXD0 */
|
|
+ select_peripheral(PD(6), PERIPH_B, 0); /* RXD1 */
|
|
+ select_peripheral(PD(5), PERIPH_B, 0); /* RXER */
|
|
+ select_peripheral(PD(4), PERIPH_B, 0); /* RXDV */
|
|
+ select_peripheral(PD(3), PERIPH_B, 0); /* MDC */
|
|
+ select_peripheral(PD(2), PERIPH_B, 0); /* MDIO */
|
|
+
|
|
+ if (!data->is_rmii) {
|
|
+ select_peripheral(PC(19), PERIPH_B, 0); /* COL */
|
|
+ select_peripheral(PC(23), PERIPH_B, 0); /* CRS */
|
|
+ select_peripheral(PC(26), PERIPH_B, 0); /* TXER */
|
|
+ select_peripheral(PC(27), PERIPH_B, 0); /* TXD2 */
|
|
+ select_peripheral(PC(28), PERIPH_B, 0); /* TXD3 */
|
|
+ select_peripheral(PC(29), PERIPH_B, 0); /* RXD2 */
|
|
+ select_peripheral(PC(30), PERIPH_B, 0); /* RXD3 */
|
|
+ select_peripheral(PC(24), PERIPH_B, 0); /* RXCK */
|
|
+ select_peripheral(PD(15), PERIPH_B, 0); /* SPD */
|
|
+ }
|
|
+ break;
|
|
+
|
|
+ default:
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
|
|
+ platform_device_register(pdev);
|
|
+
|
|
+ return pdev;
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SPI
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource atmel_spi0_resource[] = {
|
|
+ PBMEM(0xffe00000),
|
|
+ IRQ(3),
|
|
+};
|
|
+DEFINE_DEV(atmel_spi, 0);
|
|
+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
|
|
+
|
|
+static struct resource atmel_spi1_resource[] = {
|
|
+ PBMEM(0xffe00400),
|
|
+ IRQ(4),
|
|
+};
|
|
+DEFINE_DEV(atmel_spi, 1);
|
|
+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
|
|
+
|
|
+static void __init
|
|
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
|
|
+ unsigned int n, const u8 *pins)
|
|
+{
|
|
+ unsigned int pin, mode;
|
|
+
|
|
+ for (; n; n--, b++) {
|
|
+ b->bus_num = bus_num;
|
|
+ if (b->chip_select >= 4)
|
|
+ continue;
|
|
+ pin = (unsigned)b->controller_data;
|
|
+ if (!pin) {
|
|
+ pin = pins[b->chip_select];
|
|
+ b->controller_data = (void *)pin;
|
|
+ }
|
|
+ mode = AT32_GPIOF_OUTPUT;
|
|
+ if (!(b->mode & SPI_CS_HIGH))
|
|
+ mode |= AT32_GPIOF_HIGH;
|
|
+ at32_select_gpio(pin, mode);
|
|
+ }
|
|
+}
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
|
|
+{
|
|
+ /*
|
|
+ * Manage the chipselects as GPIOs, normally using the same pins
|
|
+ * the SPI controller expects; but boards can use other pins.
|
|
+ */
|
|
+ static u8 __initdata spi0_pins[] =
|
|
+ { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
|
|
+ GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
|
|
+ static u8 __initdata spi1_pins[] =
|
|
+ { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
|
|
+ GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0:
|
|
+ pdev = &atmel_spi0_device;
|
|
+ select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
|
|
+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
|
|
+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
|
|
+ at32_spi_setup_slaves(0, b, n, spi0_pins);
|
|
+ break;
|
|
+
|
|
+ case 1:
|
|
+ pdev = &atmel_spi1_device;
|
|
+ select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
|
|
+ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
|
|
+ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
|
|
+ at32_spi_setup_slaves(1, b, n, spi1_pins);
|
|
+ break;
|
|
+
|
|
+ default:
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ spi_register_board_info(b, n);
|
|
+ platform_device_register(pdev);
|
|
+ return pdev;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * TWI
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource atmel_twi0_resource[] __initdata = {
|
|
+ PBMEM(0xffe00800),
|
|
+ IRQ(5),
|
|
+};
|
|
+static struct clk atmel_twi0_pclk = {
|
|
+ .name = "twi_pclk",
|
|
+ .parent = &pba_clk,
|
|
+ .mode = pba_clk_mode,
|
|
+ .get_rate = pba_clk_get_rate,
|
|
+ .index = 2,
|
|
+};
|
|
+
|
|
+struct platform_device *__init at32_add_device_twi(unsigned int id)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ if (id != 0)
|
|
+ return NULL;
|
|
+
|
|
+ pdev = platform_device_alloc("atmel_twi", id);
|
|
+ if (!pdev)
|
|
+ return NULL;
|
|
+
|
|
+ if (platform_device_add_resources(pdev, atmel_twi0_resource,
|
|
+ ARRAY_SIZE(atmel_twi0_resource)))
|
|
+ goto err_add_resources;
|
|
+
|
|
+ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
|
|
+ select_peripheral(PA(7), PERIPH_A, 0); /* SDL */
|
|
+
|
|
+ atmel_twi0_pclk.dev = &pdev->dev;
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+ return pdev;
|
|
+
|
|
+err_add_resources:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * MMC
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource atmel_mci0_resource[] __initdata = {
|
|
+ PBMEM(0xfff02400),
|
|
+ IRQ(28),
|
|
+};
|
|
+static struct clk atmel_mci0_pclk = {
|
|
+ .name = "mci_clk",
|
|
+ .parent = &pbb_clk,
|
|
+ .mode = pbb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .index = 9,
|
|
+};
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ if (id != 0)
|
|
+ return NULL;
|
|
+
|
|
+ pdev = platform_device_alloc("atmel_mci", id);
|
|
+ if (!pdev)
|
|
+ goto fail;
|
|
+
|
|
+ if (platform_device_add_resources(pdev, atmel_mci0_resource,
|
|
+ ARRAY_SIZE(atmel_mci0_resource)))
|
|
+ goto fail;
|
|
+
|
|
+ if (data && platform_device_add_data(pdev, data,
|
|
+ sizeof(struct mci_platform_data)))
|
|
+ goto fail;
|
|
+
|
|
+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
|
|
+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
|
|
+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
|
|
+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
|
|
+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
|
|
+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
|
|
+
|
|
+ if (data) {
|
|
+ if (data->detect_pin != GPIO_PIN_NONE)
|
|
+ at32_select_gpio(data->detect_pin, 0);
|
|
+ if (data->wp_pin != GPIO_PIN_NONE)
|
|
+ at32_select_gpio(data->wp_pin, 0);
|
|
+ }
|
|
+
|
|
+ atmel_mci0_pclk.dev = &pdev->dev;
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+ return pdev;
|
|
+
|
|
+fail:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * LCDC
|
|
+ * -------------------------------------------------------------------- */
|
|
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
|
|
+static struct atmel_lcdfb_info atmel_lcdfb0_data;
|
|
+static struct resource atmel_lcdfb0_resource[] = {
|
|
+ {
|
|
+ .start = 0xff000000,
|
|
+ .end = 0xff000fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(1),
|
|
+ {
|
|
+ /* Placeholder for pre-allocated fb memory */
|
|
+ .start = 0x00000000,
|
|
+ .end = 0x00000000,
|
|
+ .flags = 0,
|
|
+ },
|
|
+};
|
|
+DEFINE_DEV_DATA(atmel_lcdfb, 0);
|
|
+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
|
|
+static struct clk atmel_lcdfb0_pixclk = {
|
|
+ .name = "lcdc_clk",
|
|
+ .dev = &atmel_lcdfb0_device.dev,
|
|
+ .mode = genclk_mode,
|
|
+ .get_rate = genclk_get_rate,
|
|
+ .set_rate = genclk_set_rate,
|
|
+ .set_parent = genclk_set_parent,
|
|
+ .index = 7,
|
|
+};
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
|
|
+ unsigned long fbmem_start, unsigned long fbmem_len)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+ struct atmel_lcdfb_info *info;
|
|
+ struct fb_monspecs *monspecs;
|
|
+ struct fb_videomode *modedb;
|
|
+ unsigned int modedb_size;
|
|
+
|
|
+ /*
|
|
+ * Do a deep copy of the fb data, monspecs and modedb. Make
|
|
+ * sure all allocations are done before setting up the
|
|
+ * portmux.
|
|
+ */
|
|
+ monspecs = kmemdup(data->default_monspecs,
|
|
+ sizeof(struct fb_monspecs), GFP_KERNEL);
|
|
+ if (!monspecs)
|
|
+ return NULL;
|
|
+
|
|
+ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
|
|
+ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
|
|
+ if (!modedb)
|
|
+ goto err_dup_modedb;
|
|
+ monspecs->modedb = modedb;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0:
|
|
+ pdev = &atmel_lcdfb0_device;
|
|
+ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
|
|
+ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
|
|
+ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
|
|
+ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
|
|
+ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
|
|
+ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
|
|
+ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
|
|
+ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
|
|
+ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
|
|
+ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
|
|
+ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
|
|
+ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
|
|
+ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
|
|
+ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
|
|
+ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
|
|
+ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
|
|
+ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
|
|
+ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
|
|
+ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
|
|
+ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
|
|
+ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
|
|
+ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
|
|
+ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
|
|
+ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
|
|
+ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
|
|
+ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
|
|
+ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
|
|
+ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
|
|
+ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
|
|
+ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
|
|
+ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
|
|
+
|
|
+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
|
|
+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
|
|
+ break;
|
|
+
|
|
+ default:
|
|
+ goto err_invalid_id;
|
|
+ }
|
|
+
|
|
+ if (fbmem_len) {
|
|
+ pdev->resource[2].start = fbmem_start;
|
|
+ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
|
|
+ pdev->resource[2].flags = IORESOURCE_MEM;
|
|
+ }
|
|
+
|
|
+ info = pdev->dev.platform_data;
|
|
+ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
|
|
+ info->default_monspecs = monspecs;
|
|
+
|
|
+ platform_device_register(pdev);
|
|
+ return pdev;
|
|
+
|
|
+err_invalid_id:
|
|
+ kfree(modedb);
|
|
+err_dup_modedb:
|
|
+ kfree(monspecs);
|
|
+ return NULL;
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * PWM
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource atmel_pwm0_resource[] __initdata = {
|
|
+ PBMEM(0xfff01400),
|
|
+ IRQ(24),
|
|
+};
|
|
+static struct clk atmel_pwm0_mck = {
|
|
+ .name = "mck",
|
|
+ .parent = &pbb_clk,
|
|
+ .mode = pbb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .index = 5,
|
|
+};
|
|
+
|
|
+struct platform_device *__init at32_add_device_pwm(u32 mask)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ if (!mask)
|
|
+ return NULL;
|
|
+
|
|
+ pdev = platform_device_alloc("atmel_pwm", 0);
|
|
+ if (!pdev)
|
|
+ return NULL;
|
|
+
|
|
+ if (platform_device_add_resources(pdev, atmel_pwm0_resource,
|
|
+ ARRAY_SIZE(atmel_pwm0_resource)))
|
|
+ goto out_free_pdev;
|
|
+
|
|
+ if (platform_device_add_data(pdev, &mask, sizeof(mask)))
|
|
+ goto out_free_pdev;
|
|
+
|
|
+ if (mask & (1 << 0))
|
|
+ select_peripheral(PA(28), PERIPH_A, 0);
|
|
+ if (mask & (1 << 1))
|
|
+ select_peripheral(PA(29), PERIPH_A, 0);
|
|
+ if (mask & (1 << 2))
|
|
+ select_peripheral(PA(21), PERIPH_B, 0);
|
|
+ if (mask & (1 << 3))
|
|
+ select_peripheral(PA(22), PERIPH_B, 0);
|
|
+
|
|
+ atmel_pwm0_mck.dev = &pdev->dev;
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+
|
|
+ return pdev;
|
|
+
|
|
+out_free_pdev:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SSC
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource ssc0_resource[] = {
|
|
+ PBMEM(0xffe01c00),
|
|
+ IRQ(10),
|
|
+};
|
|
+DEFINE_DEV(ssc, 0);
|
|
+DEV_CLK(pclk, ssc0, pba, 7);
|
|
+
|
|
+static struct resource ssc1_resource[] = {
|
|
+ PBMEM(0xffe02000),
|
|
+ IRQ(11),
|
|
+};
|
|
+DEFINE_DEV(ssc, 1);
|
|
+DEV_CLK(pclk, ssc1, pba, 8);
|
|
+
|
|
+static struct resource ssc2_resource[] = {
|
|
+ PBMEM(0xffe02400),
|
|
+ IRQ(12),
|
|
+};
|
|
+DEFINE_DEV(ssc, 2);
|
|
+DEV_CLK(pclk, ssc2, pba, 9);
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_ssc(unsigned int id, unsigned int flags)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0:
|
|
+ pdev = &ssc0_device;
|
|
+ if (flags & ATMEL_SSC_RF)
|
|
+ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
|
|
+ if (flags & ATMEL_SSC_RK)
|
|
+ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
|
|
+ if (flags & ATMEL_SSC_TK)
|
|
+ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
|
|
+ if (flags & ATMEL_SSC_TF)
|
|
+ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
|
|
+ if (flags & ATMEL_SSC_TD)
|
|
+ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
|
|
+ if (flags & ATMEL_SSC_RD)
|
|
+ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
|
|
+ break;
|
|
+ case 1:
|
|
+ pdev = &ssc1_device;
|
|
+ if (flags & ATMEL_SSC_RF)
|
|
+ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
|
|
+ if (flags & ATMEL_SSC_RK)
|
|
+ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
|
|
+ if (flags & ATMEL_SSC_TK)
|
|
+ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
|
|
+ if (flags & ATMEL_SSC_TF)
|
|
+ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
|
|
+ if (flags & ATMEL_SSC_TD)
|
|
+ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
|
|
+ if (flags & ATMEL_SSC_RD)
|
|
+ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
|
|
+ break;
|
|
+ case 2:
|
|
+ pdev = &ssc2_device;
|
|
+ if (flags & ATMEL_SSC_TD)
|
|
+ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
|
|
+ if (flags & ATMEL_SSC_RD)
|
|
+ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
|
|
+ if (flags & ATMEL_SSC_TK)
|
|
+ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
|
|
+ if (flags & ATMEL_SSC_TF)
|
|
+ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
|
|
+ if (flags & ATMEL_SSC_RF)
|
|
+ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
|
|
+ if (flags & ATMEL_SSC_RK)
|
|
+ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
|
|
+ break;
|
|
+ default:
|
|
+ return NULL;
|
|
+ }
|
|
+
|
|
+ platform_device_register(pdev);
|
|
+ return pdev;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * USB Device Controller
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource usba0_resource[] __initdata = {
|
|
+ {
|
|
+ .start = 0xff300000,
|
|
+ .end = 0xff3fffff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }, {
|
|
+ .start = 0xfff03000,
|
|
+ .end = 0xfff033ff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(31),
|
|
+};
|
|
+static struct clk usba0_pclk = {
|
|
+ .name = "pclk",
|
|
+ .parent = &pbb_clk,
|
|
+ .mode = pbb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .index = 12,
|
|
+};
|
|
+static struct clk usba0_hclk = {
|
|
+ .name = "hclk",
|
|
+ .parent = &hsb_clk,
|
|
+ .mode = hsb_clk_mode,
|
|
+ .get_rate = hsb_clk_get_rate,
|
|
+ .index = 6,
|
|
+};
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ if (id != 0)
|
|
+ return NULL;
|
|
+
|
|
+ pdev = platform_device_alloc("atmel_usba_udc", 0);
|
|
+ if (!pdev)
|
|
+ return NULL;
|
|
+
|
|
+ if (platform_device_add_resources(pdev, usba0_resource,
|
|
+ ARRAY_SIZE(usba0_resource)))
|
|
+ goto out_free_pdev;
|
|
+
|
|
+ if (data) {
|
|
+ if (platform_device_add_data(pdev, data, sizeof(*data)))
|
|
+ goto out_free_pdev;
|
|
+
|
|
+ if (data->vbus_pin != GPIO_PIN_NONE)
|
|
+ at32_select_gpio(data->vbus_pin, 0);
|
|
+ }
|
|
+
|
|
+ usba0_pclk.dev = &pdev->dev;
|
|
+ usba0_hclk.dev = &pdev->dev;
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+
|
|
+ return pdev;
|
|
+
|
|
+out_free_pdev:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * IDE / CompactFlash
|
|
+ * -------------------------------------------------------------------- */
|
|
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
|
|
+static struct resource at32_smc_cs4_resource[] __initdata = {
|
|
+ {
|
|
+ .start = 0x04000000,
|
|
+ .end = 0x07ffffff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(~0UL), /* Magic IRQ will be overridden */
|
|
+};
|
|
+static struct resource at32_smc_cs5_resource[] __initdata = {
|
|
+ {
|
|
+ .start = 0x20000000,
|
|
+ .end = 0x23ffffff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ IRQ(~0UL), /* Magic IRQ will be overridden */
|
|
+};
|
|
+
|
|
+static int __init at32_init_ide_or_cf(struct platform_device *pdev,
|
|
+ unsigned int cs, unsigned int extint)
|
|
+{
|
|
+ static unsigned int extint_pin_map[4] __initdata = {
|
|
+ GPIO_PIN_PB(25),
|
|
+ GPIO_PIN_PB(26),
|
|
+ GPIO_PIN_PB(27),
|
|
+ GPIO_PIN_PB(28),
|
|
+ };
|
|
+ static bool common_pins_initialized __initdata = false;
|
|
+ unsigned int extint_pin;
|
|
+ int ret;
|
|
+
|
|
+ if (extint >= ARRAY_SIZE(extint_pin_map))
|
|
+ return -EINVAL;
|
|
+ extint_pin = extint_pin_map[extint];
|
|
+
|
|
+ switch (cs) {
|
|
+ case 4:
|
|
+ ret = platform_device_add_resources(pdev,
|
|
+ at32_smc_cs4_resource,
|
|
+ ARRAY_SIZE(at32_smc_cs4_resource));
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
|
|
+ set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
|
|
+ break;
|
|
+ case 5:
|
|
+ ret = platform_device_add_resources(pdev,
|
|
+ at32_smc_cs5_resource,
|
|
+ ARRAY_SIZE(at32_smc_cs5_resource));
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
|
|
+ set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ if (!common_pins_initialized) {
|
|
+ select_peripheral(PE(19), PERIPH_A, 0); /* CFCE1 -> CS0_N */
|
|
+ select_peripheral(PE(20), PERIPH_A, 0); /* CFCE2 -> CS1_N */
|
|
+ select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW -> DIR */
|
|
+ select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT <- IORDY */
|
|
+ common_pins_initialized = true;
|
|
+ }
|
|
+
|
|
+ at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
|
|
+
|
|
+ pdev->resource[1].start = EIM_IRQ_BASE + extint;
|
|
+ pdev->resource[1].end = pdev->resource[1].start;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_ide(unsigned int id, unsigned int extint,
|
|
+ struct ide_platform_data *data)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ pdev = platform_device_alloc("at32_ide", id);
|
|
+ if (!pdev)
|
|
+ goto fail;
|
|
+
|
|
+ if (platform_device_add_data(pdev, data,
|
|
+ sizeof(struct ide_platform_data)))
|
|
+ goto fail;
|
|
+
|
|
+ if (at32_init_ide_or_cf(pdev, data->cs, extint))
|
|
+ goto fail;
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+ return pdev;
|
|
+
|
|
+fail:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+struct platform_device *__init
|
|
+at32_add_device_cf(unsigned int id, unsigned int extint,
|
|
+ struct cf_platform_data *data)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ pdev = platform_device_alloc("at32_cf", id);
|
|
+ if (!pdev)
|
|
+ goto fail;
|
|
+
|
|
+ if (platform_device_add_data(pdev, data,
|
|
+ sizeof(struct cf_platform_data)))
|
|
+ goto fail;
|
|
+
|
|
+ if (at32_init_ide_or_cf(pdev, data->cs, extint))
|
|
+ goto fail;
|
|
+
|
|
+ if (data->detect_pin != GPIO_PIN_NONE)
|
|
+ at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
|
|
+ if (data->reset_pin != GPIO_PIN_NONE)
|
|
+ at32_select_gpio(data->reset_pin, 0);
|
|
+ if (data->vcc_pin != GPIO_PIN_NONE)
|
|
+ at32_select_gpio(data->vcc_pin, 0);
|
|
+ /* READY is used as extint, so we can't select it as gpio */
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+ return pdev;
|
|
+
|
|
+fail:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+#endif
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * AC97C
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource atmel_ac97c0_resource[] __initdata = {
|
|
+ PBMEM(0xfff02800),
|
|
+ IRQ(29),
|
|
+};
|
|
+static struct clk atmel_ac97c0_pclk = {
|
|
+ .name = "pclk",
|
|
+ .parent = &pbb_clk,
|
|
+ .mode = pbb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .index = 10,
|
|
+};
|
|
+
|
|
+struct platform_device *__init at32_add_device_ac97c(unsigned int id)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ if (id != 0)
|
|
+ return NULL;
|
|
+
|
|
+ pdev = platform_device_alloc("atmel_ac97c", id);
|
|
+ if (!pdev)
|
|
+ return NULL;
|
|
+
|
|
+ if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
|
|
+ ARRAY_SIZE(atmel_ac97c0_resource)))
|
|
+ goto err_add_resources;
|
|
+
|
|
+ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
|
|
+ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
|
|
+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
|
|
+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
|
|
+
|
|
+ atmel_ac97c0_pclk.dev = &pdev->dev;
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+ return pdev;
|
|
+
|
|
+err_add_resources:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * ABDAC
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct resource abdac0_resource[] __initdata = {
|
|
+ PBMEM(0xfff02000),
|
|
+ IRQ(27),
|
|
+};
|
|
+static struct clk abdac0_pclk = {
|
|
+ .name = "pclk",
|
|
+ .parent = &pbb_clk,
|
|
+ .mode = pbb_clk_mode,
|
|
+ .get_rate = pbb_clk_get_rate,
|
|
+ .index = 8,
|
|
+};
|
|
+static struct clk abdac0_sample_clk = {
|
|
+ .name = "sample_clk",
|
|
+ .mode = genclk_mode,
|
|
+ .get_rate = genclk_get_rate,
|
|
+ .set_rate = genclk_set_rate,
|
|
+ .set_parent = genclk_set_parent,
|
|
+ .index = 6,
|
|
+};
|
|
+
|
|
+struct platform_device *__init at32_add_device_abdac(unsigned int id)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ if (id != 0)
|
|
+ return NULL;
|
|
+
|
|
+ pdev = platform_device_alloc("abdac", id);
|
|
+ if (!pdev)
|
|
+ return NULL;
|
|
+
|
|
+ if (platform_device_add_resources(pdev, abdac0_resource,
|
|
+ ARRAY_SIZE(abdac0_resource)))
|
|
+ goto err_add_resources;
|
|
+
|
|
+ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
|
|
+ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
|
|
+ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
|
|
+ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
|
|
+
|
|
+ abdac0_pclk.dev = &pdev->dev;
|
|
+ abdac0_sample_clk.dev = &pdev->dev;
|
|
+
|
|
+ platform_device_add(pdev);
|
|
+ return pdev;
|
|
+
|
|
+err_add_resources:
|
|
+ platform_device_put(pdev);
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * GCLK
|
|
+ * -------------------------------------------------------------------- */
|
|
+static struct clk gclk0 = {
|
|
+ .name = "gclk0",
|
|
+ .mode = genclk_mode,
|
|
+ .get_rate = genclk_get_rate,
|
|
+ .set_rate = genclk_set_rate,
|
|
+ .set_parent = genclk_set_parent,
|
|
+ .index = 0,
|
|
+};
|
|
+static struct clk gclk1 = {
|
|
+ .name = "gclk1",
|
|
+ .mode = genclk_mode,
|
|
+ .get_rate = genclk_get_rate,
|
|
+ .set_rate = genclk_set_rate,
|
|
+ .set_parent = genclk_set_parent,
|
|
+ .index = 1,
|
|
+};
|
|
+static struct clk gclk2 = {
|
|
+ .name = "gclk2",
|
|
+ .mode = genclk_mode,
|
|
+ .get_rate = genclk_get_rate,
|
|
+ .set_rate = genclk_set_rate,
|
|
+ .set_parent = genclk_set_parent,
|
|
+ .index = 2,
|
|
+};
|
|
+static struct clk gclk3 = {
|
|
+ .name = "gclk3",
|
|
+ .mode = genclk_mode,
|
|
+ .get_rate = genclk_get_rate,
|
|
+ .set_rate = genclk_set_rate,
|
|
+ .set_parent = genclk_set_parent,
|
|
+ .index = 3,
|
|
+};
|
|
+static struct clk gclk4 = {
|
|
+ .name = "gclk4",
|
|
+ .mode = genclk_mode,
|
|
+ .get_rate = genclk_get_rate,
|
|
+ .set_rate = genclk_set_rate,
|
|
+ .set_parent = genclk_set_parent,
|
|
+ .index = 4,
|
|
+};
|
|
+
|
|
+struct clk *at32_clock_list[] = {
|
|
+ &osc32k,
|
|
+ &osc0,
|
|
+ &osc1,
|
|
+ &pll0,
|
|
+ &pll1,
|
|
+ &cpu_clk,
|
|
+ &hsb_clk,
|
|
+ &pba_clk,
|
|
+ &pbb_clk,
|
|
+ &at32_pm_pclk,
|
|
+ &at32_intc0_pclk,
|
|
+ &hmatrix_clk,
|
|
+ &ebi_clk,
|
|
+ &hramc_clk,
|
|
+ &smc0_pclk,
|
|
+ &smc0_mck,
|
|
+ &pdc_hclk,
|
|
+ &pdc_pclk,
|
|
+ &dmaca0_hclk,
|
|
+ &pico_clk,
|
|
+ &pio0_mck,
|
|
+ &pio1_mck,
|
|
+ &pio2_mck,
|
|
+ &pio3_mck,
|
|
+ &pio4_mck,
|
|
+ &at32_systc0_pclk,
|
|
+ &atmel_usart0_usart,
|
|
+ &atmel_usart1_usart,
|
|
+ &atmel_usart2_usart,
|
|
+ &atmel_usart3_usart,
|
|
+ &atmel_pwm0_mck,
|
|
+#if defined(CONFIG_CPU_AT32AP7000)
|
|
+ &macb0_hclk,
|
|
+ &macb0_pclk,
|
|
+ &macb1_hclk,
|
|
+ &macb1_pclk,
|
|
+#endif
|
|
+ &atmel_spi0_spi_clk,
|
|
+ &atmel_spi1_spi_clk,
|
|
+ &atmel_twi0_pclk,
|
|
+ &atmel_mci0_pclk,
|
|
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
|
|
+ &atmel_lcdfb0_hck1,
|
|
+ &atmel_lcdfb0_pixclk,
|
|
+#endif
|
|
+ &ssc0_pclk,
|
|
+ &ssc1_pclk,
|
|
+ &ssc2_pclk,
|
|
+ &usba0_hclk,
|
|
+ &usba0_pclk,
|
|
+ &atmel_ac97c0_pclk,
|
|
+ &abdac0_pclk,
|
|
+ &abdac0_sample_clk,
|
|
+ &gclk0,
|
|
+ &gclk1,
|
|
+ &gclk2,
|
|
+ &gclk3,
|
|
+ &gclk4,
|
|
+};
|
|
+unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
|
|
+
|
|
+void __init at32_portmux_init(void)
|
|
+{
|
|
+ at32_init_pio(&pio0_device);
|
|
+ at32_init_pio(&pio1_device);
|
|
+ at32_init_pio(&pio2_device);
|
|
+ at32_init_pio(&pio3_device);
|
|
+ at32_init_pio(&pio4_device);
|
|
+}
|
|
+
|
|
+void __init at32_clock_init(void)
|
|
+{
|
|
+ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
|
|
+ int i;
|
|
+
|
|
+ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
|
|
+ main_clock = &pll0;
|
|
+ cpu_clk.parent = &pll0;
|
|
+ } else {
|
|
+ main_clock = &osc0;
|
|
+ cpu_clk.parent = &osc0;
|
|
+ }
|
|
+
|
|
+ if (pm_readl(PLL0) & PM_BIT(PLLOSC))
|
|
+ pll0.parent = &osc1;
|
|
+ if (pm_readl(PLL1) & PM_BIT(PLLOSC))
|
|
+ pll1.parent = &osc1;
|
|
+
|
|
+ genclk_init_parent(&gclk0);
|
|
+ genclk_init_parent(&gclk1);
|
|
+ genclk_init_parent(&gclk2);
|
|
+ genclk_init_parent(&gclk3);
|
|
+ genclk_init_parent(&gclk4);
|
|
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
|
|
+ genclk_init_parent(&atmel_lcdfb0_pixclk);
|
|
+#endif
|
|
+ genclk_init_parent(&abdac0_sample_clk);
|
|
+
|
|
+ /*
|
|
+ * Turn on all clocks that have at least one user already, and
|
|
+ * turn off everything else. We only do this for module
|
|
+ * clocks, and even though it isn't particularly pretty to
|
|
+ * check the address of the mode function, it should do the
|
|
+ * trick...
|
|
+ */
|
|
+ for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
|
|
+ struct clk *clk = at32_clock_list[i];
|
|
+
|
|
+ if (clk->users == 0)
|
|
+ continue;
|
|
+
|
|
+ if (clk->mode == &cpu_clk_mode)
|
|
+ cpu_mask |= 1 << clk->index;
|
|
+ else if (clk->mode == &hsb_clk_mode)
|
|
+ hsb_mask |= 1 << clk->index;
|
|
+ else if (clk->mode == &pba_clk_mode)
|
|
+ pba_mask |= 1 << clk->index;
|
|
+ else if (clk->mode == &pbb_clk_mode)
|
|
+ pbb_mask |= 1 << clk->index;
|
|
+ }
|
|
+
|
|
+ pm_writel(CPU_MASK, cpu_mask);
|
|
+ pm_writel(HSB_MASK, hsb_mask);
|
|
+ pm_writel(PBA_MASK, pba_mask);
|
|
+ pm_writel(PBB_MASK, pbb_mask);
|
|
+}
|
|
diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c
|
|
index f5bfd4c..c36a6d5 100644
|
|
--- a/arch/avr32/mach-at32ap/extint.c
|
|
+++ b/arch/avr32/mach-at32ap/extint.c
|
|
@@ -26,16 +26,10 @@
|
|
#define EIC_MODE 0x0014
|
|
#define EIC_EDGE 0x0018
|
|
#define EIC_LEVEL 0x001c
|
|
-#define EIC_TEST 0x0020
|
|
#define EIC_NMIC 0x0024
|
|
|
|
-/* Bitfields in TEST */
|
|
-#define EIC_TESTEN_OFFSET 31
|
|
-#define EIC_TESTEN_SIZE 1
|
|
-
|
|
/* Bitfields in NMIC */
|
|
-#define EIC_EN_OFFSET 0
|
|
-#define EIC_EN_SIZE 1
|
|
+#define EIC_NMIC_ENABLE (1 << 0)
|
|
|
|
/* Bit manipulation macros */
|
|
#define EIC_BIT(name) \
|
|
@@ -63,6 +57,9 @@ struct eic {
|
|
unsigned int first_irq;
|
|
};
|
|
|
|
+static struct eic *nmi_eic;
|
|
+static bool nmi_enabled;
|
|
+
|
|
static void eic_ack_irq(unsigned int irq)
|
|
{
|
|
struct eic *eic = get_irq_chip_data(irq);
|
|
@@ -133,8 +130,11 @@ static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
|
|
eic_writel(eic, EDGE, edge);
|
|
eic_writel(eic, LEVEL, level);
|
|
|
|
- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
|
|
+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
|
|
flow_type |= IRQ_LEVEL;
|
|
+ __set_irq_handler_unlocked(irq, handle_level_irq);
|
|
+ } else
|
|
+ __set_irq_handler_unlocked(irq, handle_edge_irq);
|
|
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
|
|
desc->status |= flow_type;
|
|
}
|
|
@@ -154,9 +154,8 @@ static struct irq_chip eic_chip = {
|
|
static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
struct eic *eic = desc->handler_data;
|
|
- struct irq_desc *ext_desc;
|
|
unsigned long status, pending;
|
|
- unsigned int i, ext_irq;
|
|
+ unsigned int i;
|
|
|
|
status = eic_readl(eic, ISR);
|
|
pending = status & eic_readl(eic, IMR);
|
|
@@ -165,15 +164,28 @@ static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
|
|
i = fls(pending) - 1;
|
|
pending &= ~(1 << i);
|
|
|
|
- ext_irq = i + eic->first_irq;
|
|
- ext_desc = irq_desc + ext_irq;
|
|
- if (ext_desc->status & IRQ_LEVEL)
|
|
- handle_level_irq(ext_irq, ext_desc);
|
|
- else
|
|
- handle_edge_irq(ext_irq, ext_desc);
|
|
+ generic_handle_irq(i + eic->first_irq);
|
|
}
|
|
}
|
|
|
|
+int nmi_enable(void)
|
|
+{
|
|
+ nmi_enabled = true;
|
|
+
|
|
+ if (nmi_eic)
|
|
+ eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void nmi_disable(void)
|
|
+{
|
|
+ if (nmi_eic)
|
|
+ eic_writel(nmi_eic, NMIC, 0);
|
|
+
|
|
+ nmi_enabled = false;
|
|
+}
|
|
+
|
|
static int __init eic_probe(struct platform_device *pdev)
|
|
{
|
|
struct eic *eic;
|
|
@@ -214,14 +226,13 @@ static int __init eic_probe(struct platform_device *pdev)
|
|
pattern = eic_readl(eic, MODE);
|
|
nr_irqs = fls(pattern);
|
|
|
|
- /* Trigger on falling edge unless overridden by driver */
|
|
- eic_writel(eic, MODE, 0UL);
|
|
+ /* Trigger on low level unless overridden by driver */
|
|
eic_writel(eic, EDGE, 0UL);
|
|
+ eic_writel(eic, LEVEL, 0UL);
|
|
|
|
eic->chip = &eic_chip;
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
- /* NOTE the handler we set here is ignored by the demux */
|
|
set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
|
|
handle_level_irq);
|
|
set_irq_chip_data(eic->first_irq + i, eic);
|
|
@@ -230,6 +241,16 @@ static int __init eic_probe(struct platform_device *pdev)
|
|
set_irq_chained_handler(int_irq, demux_eic_irq);
|
|
set_irq_data(int_irq, eic);
|
|
|
|
+ if (pdev->id == 0) {
|
|
+ nmi_eic = eic;
|
|
+ if (nmi_enabled)
|
|
+ /*
|
|
+ * Someone tried to enable NMI before we were
|
|
+ * ready. Do it now.
|
|
+ */
|
|
+ nmi_enable();
|
|
+ }
|
|
+
|
|
dev_info(&pdev->dev,
|
|
"External Interrupt Controller at 0x%p, IRQ %u\n",
|
|
eic->regs, int_irq);
|
|
diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
|
|
new file mode 100644
|
|
index 0000000..8cf6d11
|
|
--- /dev/null
|
|
+++ b/arch/avr32/mach-at32ap/gpio-dev.c
|
|
@@ -0,0 +1,573 @@
|
|
+/*
|
|
+ * GPIO /dev and configfs interface
|
|
+ *
|
|
+ * Copyright (C) 2006-2007 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/configfs.h>
|
|
+#include <linux/cdev.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/fs.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/poll.h>
|
|
+#include <linux/uaccess.h>
|
|
+#include <linux/wait.h>
|
|
+
|
|
+#include <asm/gpio.h>
|
|
+#include <asm/arch/portmux.h>
|
|
+
|
|
+#define GPIO_DEV_MAX 8
|
|
+
|
|
+static struct class *gpio_dev_class;
|
|
+static dev_t gpio_devt;
|
|
+
|
|
+struct gpio_item {
|
|
+ spinlock_t lock;
|
|
+
|
|
+ int enabled;
|
|
+ int initialized;
|
|
+ int port;
|
|
+ u32 pin_mask;
|
|
+ u32 oe_mask;
|
|
+
|
|
+ /* Pin state last time we read it (for blocking reads) */
|
|
+ u32 pin_state;
|
|
+ int changed;
|
|
+
|
|
+ wait_queue_head_t change_wq;
|
|
+ struct fasync_struct *async_queue;
|
|
+
|
|
+ int id;
|
|
+ struct class_device *gpio_dev;
|
|
+ struct cdev char_dev;
|
|
+ struct config_item item;
|
|
+};
|
|
+
|
|
+struct gpio_attribute {
|
|
+ struct configfs_attribute attr;
|
|
+ ssize_t (*show)(struct gpio_item *, char *);
|
|
+ ssize_t (*store)(struct gpio_item *, const char *, size_t);
|
|
+};
|
|
+
|
|
+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct gpio_item *gpio = dev_id;
|
|
+ u32 old_state, new_state;
|
|
+
|
|
+ old_state = gpio->pin_state;
|
|
+ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
|
|
+ gpio->pin_state = new_state;
|
|
+
|
|
+ if (new_state != old_state) {
|
|
+ gpio->changed = 1;
|
|
+ wake_up_interruptible(&gpio->change_wq);
|
|
+
|
|
+ if (gpio->async_queue)
|
|
+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
|
|
+ }
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int gpio_dev_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ struct gpio_item *gpio = container_of(inode->i_cdev,
|
|
+ struct gpio_item,
|
|
+ char_dev);
|
|
+ unsigned int irq;
|
|
+ unsigned int i;
|
|
+ int ret;
|
|
+
|
|
+ nonseekable_open(inode, file);
|
|
+ config_item_get(&gpio->item);
|
|
+ file->private_data = gpio;
|
|
+
|
|
+ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
|
|
+ gpio->pin_mask);
|
|
+ gpio->changed = 1;
|
|
+
|
|
+ for (i = 0; i < 32; i++) {
|
|
+ if (gpio->pin_mask & (1 << i)) {
|
|
+ irq = gpio_to_irq(32 * gpio->port + i);
|
|
+ ret = request_irq(irq, gpio_dev_interrupt, 0,
|
|
+ "gpio-dev", gpio);
|
|
+ if (ret)
|
|
+ goto err_irq;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_irq:
|
|
+ while (i--) {
|
|
+ if (gpio->pin_mask & (1 << i)) {
|
|
+ irq = gpio_to_irq(32 * gpio->port + i);
|
|
+ free_irq(irq, gpio);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ config_item_put(&gpio->item);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int gpio_dev_fasync(int fd, struct file *file, int mode)
|
|
+{
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
+
|
|
+ return fasync_helper(fd, file, mode, &gpio->async_queue);
|
|
+}
|
|
+
|
|
+static int gpio_dev_release(struct inode *inode, struct file *file)
|
|
+{
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
+ unsigned int irq;
|
|
+ unsigned int i;
|
|
+
|
|
+ gpio_dev_fasync(-1, file, 0);
|
|
+
|
|
+ for (i = 0; i < 32; i++) {
|
|
+ if (gpio->pin_mask & (1 << i)) {
|
|
+ irq = gpio_to_irq(32 * gpio->port + i);
|
|
+ free_irq(irq, gpio);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ config_item_put(&gpio->item);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
|
|
+{
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
+ unsigned int mask = 0;
|
|
+
|
|
+ poll_wait(file, &gpio->change_wq, wait);
|
|
+ if (gpio->changed)
|
|
+ mask |= POLLIN | POLLRDNORM;
|
|
+
|
|
+ return mask;
|
|
+}
|
|
+
|
|
+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
|
|
+ size_t count, loff_t *offset)
|
|
+{
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
+ u32 value;
|
|
+
|
|
+ spin_lock_irq(&gpio->lock);
|
|
+ while (!gpio->changed) {
|
|
+ spin_unlock_irq(&gpio->lock);
|
|
+
|
|
+ if (file->f_flags & O_NONBLOCK)
|
|
+ return -EAGAIN;
|
|
+
|
|
+ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
|
|
+ return -ERESTARTSYS;
|
|
+
|
|
+ spin_lock_irq(&gpio->lock);
|
|
+ }
|
|
+
|
|
+ gpio->changed = 0;
|
|
+ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
|
|
+
|
|
+ spin_unlock_irq(&gpio->lock);
|
|
+
|
|
+ count = min(count, (size_t)4);
|
|
+ if (copy_to_user(buf, &value, count))
|
|
+ return -EFAULT;
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
|
|
+ size_t count, loff_t *offset)
|
|
+{
|
|
+ struct gpio_item *gpio = file->private_data;
|
|
+ u32 value = 0;
|
|
+ u32 mask = ~0UL;
|
|
+
|
|
+ count = min(count, (size_t)4);
|
|
+ if (copy_from_user(&value, buf, count))
|
|
+ return -EFAULT;
|
|
+
|
|
+ /* Assuming big endian */
|
|
+ mask <<= (4 - count) * 8;
|
|
+ mask &= gpio->pin_mask;
|
|
+
|
|
+ at32_gpio_set_value_multiple(gpio->port, value, mask);
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+static struct file_operations gpio_dev_fops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .llseek = no_llseek,
|
|
+ .open = gpio_dev_open,
|
|
+ .release = gpio_dev_release,
|
|
+ .fasync = gpio_dev_fasync,
|
|
+ .poll = gpio_dev_poll,
|
|
+ .read = gpio_dev_read,
|
|
+ .write = gpio_dev_write,
|
|
+};
|
|
+
|
|
+static struct gpio_item *to_gpio_item(struct config_item *item)
|
|
+{
|
|
+ return item ? container_of(item, struct gpio_item, item) : NULL;
|
|
+}
|
|
+
|
|
+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
|
|
+{
|
|
+ return sprintf(page, "%d\n", gpio->port);
|
|
+}
|
|
+
|
|
+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
|
|
+ const char *page, size_t count)
|
|
+{
|
|
+ unsigned long id;
|
|
+ char *p = (char *)page;
|
|
+ ssize_t ret = -EINVAL;
|
|
+
|
|
+ id = simple_strtoul(p, &p, 0);
|
|
+ if (!p || (*p && (*p != '\n')))
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Switching PIO is not allowed when live... */
|
|
+ spin_lock(&gpio->lock);
|
|
+ if (!gpio->enabled) {
|
|
+ ret = -ENXIO;
|
|
+ if (at32_gpio_port_is_valid(id)) {
|
|
+ gpio->port = id;
|
|
+ ret = count;
|
|
+ }
|
|
+ }
|
|
+ spin_unlock(&gpio->lock);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
|
|
+{
|
|
+ return sprintf(page, "0x%08x\n", gpio->pin_mask);
|
|
+}
|
|
+
|
|
+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
|
|
+ const char *page, size_t count)
|
|
+{
|
|
+ u32 new_mask;
|
|
+ char *p = (char *)page;
|
|
+ ssize_t ret = -EINVAL;
|
|
+
|
|
+ new_mask = simple_strtoul(p, &p, 0);
|
|
+ if (!p || (*p && (*p != '\n')))
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Can't update the pin mask while live. */
|
|
+ spin_lock(&gpio->lock);
|
|
+ if (!gpio->enabled) {
|
|
+ gpio->oe_mask &= new_mask;
|
|
+ gpio->pin_mask = new_mask;
|
|
+ ret = count;
|
|
+ }
|
|
+ spin_unlock(&gpio->lock);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
|
|
+{
|
|
+ return sprintf(page, "0x%08x\n", gpio->oe_mask);
|
|
+}
|
|
+
|
|
+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
|
|
+ const char *page, size_t count)
|
|
+{
|
|
+ u32 mask;
|
|
+ char *p = (char *)page;
|
|
+ ssize_t ret = -EINVAL;
|
|
+
|
|
+ mask = simple_strtoul(p, &p, 0);
|
|
+ if (!p || (*p && (*p != '\n')))
|
|
+ return -EINVAL;
|
|
+
|
|
+ spin_lock(&gpio->lock);
|
|
+ if (!gpio->enabled) {
|
|
+ gpio->oe_mask = mask & gpio->pin_mask;
|
|
+ ret = count;
|
|
+ }
|
|
+ spin_unlock(&gpio->lock);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
|
|
+{
|
|
+ return sprintf(page, "%d\n", gpio->enabled);
|
|
+}
|
|
+
|
|
+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
|
|
+ const char *page, size_t count)
|
|
+{
|
|
+ char *p = (char *)page;
|
|
+ int enabled;
|
|
+ int ret;
|
|
+
|
|
+ enabled = simple_strtoul(p, &p, 0);
|
|
+ if (!p || (*p && (*p != '\n')))
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* make it a boolean value */
|
|
+ enabled = !!enabled;
|
|
+
|
|
+ if (gpio->enabled == enabled)
|
|
+ /* No change; do nothing. */
|
|
+ return count;
|
|
+
|
|
+ BUG_ON(gpio->id >= GPIO_DEV_MAX);
|
|
+
|
|
+ if (!enabled) {
|
|
+ class_device_unregister(gpio->gpio_dev);
|
|
+ cdev_del(&gpio->char_dev);
|
|
+ at32_deselect_pins(gpio->port, gpio->pin_mask);
|
|
+ gpio->initialized = 0;
|
|
+ } else {
|
|
+ if (gpio->port < 0 || !gpio->pin_mask)
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* Disallow any updates to gpio_id or pin_mask */
|
|
+ spin_lock(&gpio->lock);
|
|
+ gpio->enabled = enabled;
|
|
+ spin_unlock(&gpio->lock);
|
|
+
|
|
+ if (!enabled)
|
|
+ return count;
|
|
+
|
|
+ /* Now, try to allocate the pins */
|
|
+ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
|
|
+ if (ret)
|
|
+ goto err_alloc_pins;
|
|
+
|
|
+ gpio->initialized = 1;
|
|
+
|
|
+ cdev_init(&gpio->char_dev, &gpio_dev_fops);
|
|
+ gpio->char_dev.owner = THIS_MODULE;
|
|
+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
|
|
+ if (ret < 0)
|
|
+ goto err_cdev_add;
|
|
+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
|
|
+ MKDEV(MAJOR(gpio_devt), gpio->id),
|
|
+ NULL,
|
|
+ "gpio%d", gpio->id);
|
|
+ if (IS_ERR(gpio->gpio_dev)) {
|
|
+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
|
|
+ ret = PTR_ERR(gpio->gpio_dev);
|
|
+ goto err_class_dev;
|
|
+ }
|
|
+
|
|
+ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
|
|
+ gpio->id, gpio->port, gpio->pin_mask,
|
|
+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_class_dev:
|
|
+ cdev_del(&gpio->char_dev);
|
|
+err_cdev_add:
|
|
+ at32_deselect_pins(gpio->port, gpio->pin_mask);
|
|
+ gpio->initialized = 0;
|
|
+err_alloc_pins:
|
|
+ spin_lock(&gpio->lock);
|
|
+ gpio->enabled = 0;
|
|
+ spin_unlock(&gpio->lock);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static struct gpio_attribute gpio_item_attr_gpio_id = {
|
|
+ .attr = {
|
|
+ .ca_owner = THIS_MODULE,
|
|
+ .ca_name = "gpio_id",
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
+ },
|
|
+ .show = gpio_show_gpio_id,
|
|
+ .store = gpio_store_gpio_id,
|
|
+};
|
|
+static struct gpio_attribute gpio_item_attr_pin_mask = {
|
|
+ .attr = {
|
|
+ .ca_owner = THIS_MODULE,
|
|
+ .ca_name = "pin_mask",
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
+ },
|
|
+ .show = gpio_show_pin_mask,
|
|
+ .store = gpio_store_pin_mask,
|
|
+};
|
|
+static struct gpio_attribute gpio_item_attr_oe_mask = {
|
|
+ .attr = {
|
|
+ .ca_owner = THIS_MODULE,
|
|
+ .ca_name = "oe_mask",
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
+ },
|
|
+ .show = gpio_show_oe_mask,
|
|
+ .store = gpio_store_oe_mask,
|
|
+};
|
|
+static struct gpio_attribute gpio_item_attr_enabled = {
|
|
+ .attr = {
|
|
+ .ca_owner = THIS_MODULE,
|
|
+ .ca_name = "enabled",
|
|
+ .ca_mode = S_IRUGO | S_IWUSR,
|
|
+ },
|
|
+ .show = gpio_show_enabled,
|
|
+ .store = gpio_store_enabled,
|
|
+};
|
|
+
|
|
+static struct configfs_attribute *gpio_item_attrs[] = {
|
|
+ &gpio_item_attr_gpio_id.attr,
|
|
+ &gpio_item_attr_pin_mask.attr,
|
|
+ &gpio_item_attr_oe_mask.attr,
|
|
+ &gpio_item_attr_enabled.attr,
|
|
+ NULL,
|
|
+};
|
|
+
|
|
+static ssize_t gpio_show_attr(struct config_item *item,
|
|
+ struct configfs_attribute *attr,
|
|
+ char *page)
|
|
+{
|
|
+ struct gpio_item *gpio_item = to_gpio_item(item);
|
|
+ struct gpio_attribute *gpio_attr
|
|
+ = container_of(attr, struct gpio_attribute, attr);
|
|
+ ssize_t ret = 0;
|
|
+
|
|
+ if (gpio_attr->show)
|
|
+ ret = gpio_attr->show(gpio_item, page);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static ssize_t gpio_store_attr(struct config_item *item,
|
|
+ struct configfs_attribute *attr,
|
|
+ const char *page, size_t count)
|
|
+{
|
|
+ struct gpio_item *gpio_item = to_gpio_item(item);
|
|
+ struct gpio_attribute *gpio_attr
|
|
+ = container_of(attr, struct gpio_attribute, attr);
|
|
+ ssize_t ret = -EINVAL;
|
|
+
|
|
+ if (gpio_attr->store)
|
|
+ ret = gpio_attr->store(gpio_item, page, count);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void gpio_release(struct config_item *item)
|
|
+{
|
|
+ kfree(to_gpio_item(item));
|
|
+}
|
|
+
|
|
+static struct configfs_item_operations gpio_item_ops = {
|
|
+ .release = gpio_release,
|
|
+ .show_attribute = gpio_show_attr,
|
|
+ .store_attribute = gpio_store_attr,
|
|
+};
|
|
+
|
|
+static struct config_item_type gpio_item_type = {
|
|
+ .ct_item_ops = &gpio_item_ops,
|
|
+ .ct_attrs = gpio_item_attrs,
|
|
+ .ct_owner = THIS_MODULE,
|
|
+};
|
|
+
|
|
+static struct config_item *gpio_make_item(struct config_group *group,
|
|
+ const char *name)
|
|
+{
|
|
+ static int next_id;
|
|
+ struct gpio_item *gpio;
|
|
+
|
|
+ if (next_id >= GPIO_DEV_MAX)
|
|
+ return NULL;
|
|
+
|
|
+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
|
|
+ if (!gpio)
|
|
+ return NULL;
|
|
+
|
|
+ gpio->id = next_id++;
|
|
+ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
|
|
+ spin_lock_init(&gpio->lock);
|
|
+ init_waitqueue_head(&gpio->change_wq);
|
|
+
|
|
+ return &gpio->item;
|
|
+}
|
|
+
|
|
+static void gpio_drop_item(struct config_group *group,
|
|
+ struct config_item *item)
|
|
+{
|
|
+ struct gpio_item *gpio = to_gpio_item(item);
|
|
+
|
|
+ spin_lock(&gpio->lock);
|
|
+ if (gpio->enabled) {
|
|
+ class_device_unregister(gpio->gpio_dev);
|
|
+ cdev_del(&gpio->char_dev);
|
|
+ }
|
|
+
|
|
+ if (gpio->initialized) {
|
|
+ at32_deselect_pins(gpio->port, gpio->pin_mask);
|
|
+ gpio->initialized = 0;
|
|
+ gpio->enabled = 0;
|
|
+ }
|
|
+ spin_unlock(&gpio->lock);
|
|
+}
|
|
+
|
|
+static struct configfs_group_operations gpio_group_ops = {
|
|
+ .make_item = gpio_make_item,
|
|
+ .drop_item = gpio_drop_item,
|
|
+};
|
|
+
|
|
+static struct config_item_type gpio_group_type = {
|
|
+ .ct_group_ops = &gpio_group_ops,
|
|
+ .ct_owner = THIS_MODULE,
|
|
+};
|
|
+
|
|
+static struct configfs_subsystem gpio_subsys = {
|
|
+ .su_group = {
|
|
+ .cg_item = {
|
|
+ .ci_namebuf = "gpio",
|
|
+ .ci_type = &gpio_group_type,
|
|
+ },
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init gpio_dev_init(void)
|
|
+{
|
|
+ int err;
|
|
+
|
|
+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
|
|
+ if (IS_ERR(gpio_dev_class)) {
|
|
+ err = PTR_ERR(gpio_dev_class);
|
|
+ goto err_class_create;
|
|
+ }
|
|
+
|
|
+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
|
|
+ if (err < 0)
|
|
+ goto err_alloc_chrdev;
|
|
+
|
|
+ /* Configfs initialization */
|
|
+ config_group_init(&gpio_subsys.su_group);
|
|
+ mutex_init(&gpio_subsys.su_mutex);
|
|
+ err = configfs_register_subsystem(&gpio_subsys);
|
|
+ if (err)
|
|
+ goto err_register_subsys;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_register_subsys:
|
|
+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
|
|
+err_alloc_chrdev:
|
|
+ class_destroy(gpio_dev_class);
|
|
+err_class_create:
|
|
+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
|
|
+ return err;
|
|
+}
|
|
+late_initcall(gpio_dev_init);
|
|
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
|
|
index d61a02d..c978c36 100644
|
|
--- a/arch/avr32/mach-at32ap/pio.c
|
|
+++ b/arch/avr32/mach-at32ap/pio.c
|
|
@@ -162,6 +162,82 @@ fail:
|
|
dump_stack();
|
|
}
|
|
|
|
+#ifdef CONFIG_GPIO_DEV
|
|
+
|
|
+/* Gang allocators and accessors; used by the GPIO /dev driver */
|
|
+int at32_gpio_port_is_valid(unsigned int port)
|
|
+{
|
|
+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
|
|
+}
|
|
+
|
|
+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
|
|
+{
|
|
+ struct pio_device *pio;
|
|
+ u32 old, new;
|
|
+
|
|
+ pio = &pio_dev[port];
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
|
|
+
|
|
+ /* Try to allocate the pins */
|
|
+ do {
|
|
+ old = pio->pinmux_mask;
|
|
+ if (old & pins)
|
|
+ return -EBUSY;
|
|
+
|
|
+ new = old | pins;
|
|
+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
|
|
+
|
|
+ /* That went well, now configure the port */
|
|
+ pio_writel(pio, OER, oe_mask);
|
|
+ pio_writel(pio, PER, pins);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void at32_deselect_pins(unsigned int port, u32 pins)
|
|
+{
|
|
+ struct pio_device *pio;
|
|
+ u32 old, new;
|
|
+
|
|
+ pio = &pio_dev[port];
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
|
|
+
|
|
+ /* Return to a "safe" mux configuration */
|
|
+ pio_writel(pio, PUER, pins);
|
|
+ pio_writel(pio, ODR, pins);
|
|
+
|
|
+ /* Deallocate the pins */
|
|
+ do {
|
|
+ old = pio->pinmux_mask;
|
|
+ new = old & ~pins;
|
|
+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
|
|
+}
|
|
+
|
|
+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
|
|
+{
|
|
+ struct pio_device *pio;
|
|
+
|
|
+ pio = &pio_dev[port];
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
|
|
+
|
|
+ return pio_readl(pio, PDSR) & pins;
|
|
+}
|
|
+
|
|
+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
|
|
+{
|
|
+ struct pio_device *pio;
|
|
+
|
|
+ pio = &pio_dev[port];
|
|
+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
|
|
+
|
|
+ /* No atomic updates for now... */
|
|
+ pio_writel(pio, CODR, ~value & mask);
|
|
+ pio_writel(pio, SODR, value & mask);
|
|
+}
|
|
+
|
|
+#endif /* CONFIG_GPIO_DEV */
|
|
+
|
|
+
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
/* GPIO API */
|
|
diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
|
|
index 177fea8..6d8c794 100644
|
|
--- a/arch/avr32/mm/dma-coherent.c
|
|
+++ b/arch/avr32/mm/dma-coherent.c
|
|
@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
|
|
struct page *page, *free, *end;
|
|
int order;
|
|
|
|
+ /* Following is a work-around (a.k.a. hack) to prevent pages
|
|
+ * with __GFP_COMP being passed to split_page() which cannot
|
|
+ * handle them. The real problem is that this flag probably
|
|
+ * should be 0 on AVR32 as it is not supported on this
|
|
+ * platform--see CONFIG_HUGETLB_PAGE. */
|
|
+ gfp &= ~(__GFP_COMP);
|
|
+
|
|
size = PAGE_ALIGN(size);
|
|
order = get_order(size);
|
|
|
|
diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
|
|
index 5667201..b835257 100644
|
|
--- a/arch/avr32/mm/tlb.c
|
|
+++ b/arch/avr32/mm/tlb.c
|
|
@@ -348,7 +348,7 @@ static int tlb_show(struct seq_file *tlb, void *v)
|
|
return 0;
|
|
}
|
|
|
|
-static struct seq_operations tlb_ops = {
|
|
+static const struct seq_operations tlb_ops = {
|
|
.start = tlb_start,
|
|
.next = tlb_next,
|
|
.stop = tlb_stop,
|
|
diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile
|
|
new file mode 100644
|
|
index 0000000..1fe81c3
|
|
--- /dev/null
|
|
+++ b/arch/avr32/oprofile/Makefile
|
|
@@ -0,0 +1,8 @@
|
|
+obj-$(CONFIG_OPROFILE) += oprofile.o
|
|
+
|
|
+oprofile-y := $(addprefix ../../../drivers/oprofile/, \
|
|
+ oprof.o cpu_buffer.o buffer_sync.o \
|
|
+ event_buffer.o oprofile_files.o \
|
|
+ oprofilefs.o oprofile_stats.o \
|
|
+ timer_int.o)
|
|
+oprofile-y += op_model_avr32.o
|
|
diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
|
|
new file mode 100644
|
|
index 0000000..e2f876b
|
|
--- /dev/null
|
|
+++ b/arch/avr32/oprofile/op_model_avr32.c
|
|
@@ -0,0 +1,235 @@
|
|
+/*
|
|
+ * AVR32 Performance Counter Driver
|
|
+ *
|
|
+ * Copyright (C) 2005-2007 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ * Author: Ronny Pedersen
|
|
+ */
|
|
+#include <linux/errno.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/irq.h>
|
|
+#include <linux/oprofile.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/types.h>
|
|
+
|
|
+#include <asm/intc.h>
|
|
+#include <asm/sysreg.h>
|
|
+#include <asm/system.h>
|
|
+
|
|
+#define AVR32_PERFCTR_IRQ_GROUP 0
|
|
+#define AVR32_PERFCTR_IRQ_LINE 1
|
|
+
|
|
+enum { PCCNT, PCNT0, PCNT1, NR_counter };
|
|
+
|
|
+struct avr32_perf_counter {
|
|
+ unsigned long enabled;
|
|
+ unsigned long event;
|
|
+ unsigned long count;
|
|
+ unsigned long unit_mask;
|
|
+ unsigned long kernel;
|
|
+ unsigned long user;
|
|
+
|
|
+ u32 ie_mask;
|
|
+ u32 flag_mask;
|
|
+};
|
|
+
|
|
+static struct avr32_perf_counter counter[NR_counter] = {
|
|
+ {
|
|
+ .ie_mask = SYSREG_BIT(IEC),
|
|
+ .flag_mask = SYSREG_BIT(FC),
|
|
+ }, {
|
|
+ .ie_mask = SYSREG_BIT(IE0),
|
|
+ .flag_mask = SYSREG_BIT(F0),
|
|
+ }, {
|
|
+ .ie_mask = SYSREG_BIT(IE1),
|
|
+ .flag_mask = SYSREG_BIT(F1),
|
|
+ },
|
|
+};
|
|
+
|
|
+static void avr32_perf_counter_reset(void)
|
|
+{
|
|
+ /* Reset all counter and disable/clear all interrupts */
|
|
+ sysreg_write(PCCR, (SYSREG_BIT(PCCR_R)
|
|
+ | SYSREG_BIT(PCCR_C)
|
|
+ | SYSREG_BIT(FC)
|
|
+ | SYSREG_BIT(F0)
|
|
+ | SYSREG_BIT(F1)));
|
|
+}
|
|
+
|
|
+static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct avr32_perf_counter *ctr = dev_id;
|
|
+ struct pt_regs *regs;
|
|
+ u32 pccr;
|
|
+
|
|
+ if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP)
|
|
+ & (1 << AVR32_PERFCTR_IRQ_LINE))))
|
|
+ return IRQ_NONE;
|
|
+
|
|
+ regs = get_irq_regs();
|
|
+ pccr = sysreg_read(PCCR);
|
|
+
|
|
+ /* Clear the interrupt flags we're about to handle */
|
|
+ sysreg_write(PCCR, pccr);
|
|
+
|
|
+ /* PCCNT */
|
|
+ if (ctr->enabled && (pccr & ctr->flag_mask)) {
|
|
+ sysreg_write(PCCNT, -ctr->count);
|
|
+ oprofile_add_sample(regs, PCCNT);
|
|
+ }
|
|
+ ctr++;
|
|
+ /* PCNT0 */
|
|
+ if (ctr->enabled && (pccr & ctr->flag_mask)) {
|
|
+ sysreg_write(PCNT0, -ctr->count);
|
|
+ oprofile_add_sample(regs, PCNT0);
|
|
+ }
|
|
+ ctr++;
|
|
+ /* PCNT1 */
|
|
+ if (ctr->enabled && (pccr & ctr->flag_mask)) {
|
|
+ sysreg_write(PCNT1, -ctr->count);
|
|
+ oprofile_add_sample(regs, PCNT1);
|
|
+ }
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int avr32_perf_counter_create_files(struct super_block *sb,
|
|
+ struct dentry *root)
|
|
+{
|
|
+ struct dentry *dir;
|
|
+ unsigned int i;
|
|
+ char filename[4];
|
|
+
|
|
+ for (i = 0; i < NR_counter; i++) {
|
|
+ snprintf(filename, sizeof(filename), "%u", i);
|
|
+ dir = oprofilefs_mkdir(sb, root, filename);
|
|
+
|
|
+ oprofilefs_create_ulong(sb, dir, "enabled",
|
|
+ &counter[i].enabled);
|
|
+ oprofilefs_create_ulong(sb, dir, "event",
|
|
+ &counter[i].event);
|
|
+ oprofilefs_create_ulong(sb, dir, "count",
|
|
+ &counter[i].count);
|
|
+
|
|
+ /* Dummy entries */
|
|
+ oprofilefs_create_ulong(sb, dir, "kernel",
|
|
+ &counter[i].kernel);
|
|
+ oprofilefs_create_ulong(sb, dir, "user",
|
|
+ &counter[i].user);
|
|
+ oprofilefs_create_ulong(sb, dir, "unit_mask",
|
|
+ &counter[i].unit_mask);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int avr32_perf_counter_setup(void)
|
|
+{
|
|
+ struct avr32_perf_counter *ctr;
|
|
+ u32 pccr;
|
|
+ int ret;
|
|
+ int i;
|
|
+
|
|
+ pr_debug("avr32_perf_counter_setup\n");
|
|
+
|
|
+ if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) {
|
|
+ printk(KERN_ERR
|
|
+ "oprofile: setup: perf counter already enabled\n");
|
|
+ return -EBUSY;
|
|
+ }
|
|
+
|
|
+ ret = request_irq(AVR32_PERFCTR_IRQ_GROUP,
|
|
+ avr32_perf_counter_interrupt, IRQF_SHARED,
|
|
+ "oprofile", counter);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ avr32_perf_counter_reset();
|
|
+
|
|
+ pccr = 0;
|
|
+ for (i = PCCNT; i < NR_counter; i++) {
|
|
+ ctr = &counter[i];
|
|
+ if (!ctr->enabled)
|
|
+ continue;
|
|
+
|
|
+ pr_debug("enabling counter %d...\n", i);
|
|
+
|
|
+ pccr |= ctr->ie_mask;
|
|
+
|
|
+ switch (i) {
|
|
+ case PCCNT:
|
|
+ /* PCCNT always counts cycles, so no events */
|
|
+ sysreg_write(PCCNT, -ctr->count);
|
|
+ break;
|
|
+ case PCNT0:
|
|
+ pccr |= SYSREG_BF(CONF0, ctr->event);
|
|
+ sysreg_write(PCNT0, -ctr->count);
|
|
+ break;
|
|
+ case PCNT1:
|
|
+ pccr |= SYSREG_BF(CONF1, ctr->event);
|
|
+ sysreg_write(PCNT1, -ctr->count);
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr);
|
|
+
|
|
+ sysreg_write(PCCR, pccr);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void avr32_perf_counter_shutdown(void)
|
|
+{
|
|
+ pr_debug("avr32_perf_counter_shutdown\n");
|
|
+
|
|
+ avr32_perf_counter_reset();
|
|
+ free_irq(AVR32_PERFCTR_IRQ_GROUP, counter);
|
|
+}
|
|
+
|
|
+static int avr32_perf_counter_start(void)
|
|
+{
|
|
+ pr_debug("avr32_perf_counter_start\n");
|
|
+
|
|
+ sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void avr32_perf_counter_stop(void)
|
|
+{
|
|
+ pr_debug("avr32_perf_counter_stop\n");
|
|
+
|
|
+ sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E));
|
|
+}
|
|
+
|
|
+static struct oprofile_operations avr32_perf_counter_ops __initdata = {
|
|
+ .create_files = avr32_perf_counter_create_files,
|
|
+ .setup = avr32_perf_counter_setup,
|
|
+ .shutdown = avr32_perf_counter_shutdown,
|
|
+ .start = avr32_perf_counter_start,
|
|
+ .stop = avr32_perf_counter_stop,
|
|
+ .cpu_type = "avr32",
|
|
+};
|
|
+
|
|
+int __init oprofile_arch_init(struct oprofile_operations *ops)
|
|
+{
|
|
+ if (!(current_cpu_data.features & AVR32_FEATURE_PCTR))
|
|
+ return -ENODEV;
|
|
+
|
|
+ memcpy(ops, &avr32_perf_counter_ops,
|
|
+ sizeof(struct oprofile_operations));
|
|
+
|
|
+ printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void oprofile_arch_exit(void)
|
|
+{
|
|
+
|
|
+}
|
|
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
|
|
index c466c6c..0bb2052 100644
|
|
--- a/drivers/i2c/busses/Kconfig
|
|
+++ b/drivers/i2c/busses/Kconfig
|
|
@@ -88,6 +88,14 @@ config I2C_AT91
|
|
to support combined I2C messages. Use the i2c-gpio driver
|
|
unless your system can cope with those limitations.
|
|
|
|
+config I2C_ATMELTWI
|
|
+ tristate "Atmel Two-Wire Interface (TWI)"
|
|
+ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
|
|
+ help
|
|
+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
|
|
+ AT91-based device and want to use its built-in TWI
|
|
+ functionality.
|
|
+
|
|
config I2C_AU1550
|
|
tristate "Au1550/Au1200 SMBus interface"
|
|
depends on SOC_AU1550 || SOC_AU1200
|
|
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
|
|
index 81d43c2..af3f350 100644
|
|
--- a/drivers/i2c/busses/Makefile
|
|
+++ b/drivers/i2c/busses/Makefile
|
|
@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
|
|
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
|
|
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
|
|
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
|
|
+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
|
|
|
|
ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
|
|
EXTRA_CFLAGS += -DDEBUG
|
|
diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
|
|
new file mode 100644
|
|
index 0000000..70c719a
|
|
--- /dev/null
|
|
+++ b/drivers/i2c/busses/i2c-atmeltwi.c
|
|
@@ -0,0 +1,436 @@
|
|
+/*
|
|
+ * i2c Support for Atmel's Two-Wire Interface (TWI)
|
|
+ *
|
|
+ * Based on the work of Copyright (C) 2004 Rick Bronson
|
|
+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
|
|
+ * Ported to AVR32 and heavily modified by Espen Krangnes
|
|
+ * <ekrangnes at atmel.com>
|
|
+ *
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
|
+ *
|
|
+ * Borrowed heavily from the original work by:
|
|
+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
|
|
+ *
|
|
+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
|
|
+ * bugs removed, interrupt routine markedly rewritten
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+#undef VERBOSE_DEBUG
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/i2c.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/completion.h>
|
|
+#include <linux/io.h>
|
|
+
|
|
+#include "i2c-atmeltwi.h"
|
|
+
|
|
+static unsigned int baudrate = 100 * 1000;
|
|
+module_param(baudrate, uint, S_IRUGO);
|
|
+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
|
|
+
|
|
+
|
|
+struct atmel_twi {
|
|
+ void __iomem *regs;
|
|
+ struct i2c_adapter adapter;
|
|
+ struct clk *pclk;
|
|
+ struct completion comp;
|
|
+ u32 mask;
|
|
+ u8 *buf;
|
|
+ u16 len;
|
|
+ u16 acks_left;
|
|
+ int status;
|
|
+ unsigned int irq;
|
|
+
|
|
+};
|
|
+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
|
|
+
|
|
+/*
|
|
+ * (Re)Initialize the TWI hardware registers.
|
|
+ */
|
|
+static int twi_hwinit(struct atmel_twi *twi)
|
|
+{
|
|
+ unsigned long cdiv, ckdiv = 0;
|
|
+
|
|
+ /* REVISIT: wait till SCL is high before resetting; otherwise,
|
|
+ * some versions will wedge forever.
|
|
+ */
|
|
+
|
|
+ twi_writel(twi, IDR, ~0UL);
|
|
+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
|
|
+ twi_readl(twi, SR);
|
|
+
|
|
+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
|
|
+
|
|
+ while (cdiv > 255) {
|
|
+ ckdiv++;
|
|
+ cdiv = cdiv >> 1;
|
|
+ }
|
|
+
|
|
+ /* REVISIT: there are various errata to consider re CDIV and CHDIV
|
|
+ * here, at least on at91 parts.
|
|
+ */
|
|
+
|
|
+ if (ckdiv > 7)
|
|
+ return -EINVAL;
|
|
+ else
|
|
+ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
|
|
+ | TWI_BF(CHDIV, cdiv)
|
|
+ | TWI_BF(CLDIV, cdiv));
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Waits for the i2c status register to set the specified bitmask
|
|
+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
|
|
+ * limit, but I2C has no limit at all.
|
|
+ */
|
|
+static int twi_complete(struct atmel_twi *twi, u32 mask)
|
|
+{
|
|
+ int timeout = msecs_to_jiffies(100);
|
|
+
|
|
+ mask |= TWI_BIT(TXCOMP);
|
|
+ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
|
|
+ init_completion(&twi->comp);
|
|
+
|
|
+ twi_writel(twi, IER, mask);
|
|
+
|
|
+ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
|
|
+ /* RESET TWI interface */
|
|
+ twi_writel(twi, CR, TWI_BIT(SWRST));
|
|
+
|
|
+ /* Reinitialize TWI */
|
|
+ twi_hwinit(twi);
|
|
+
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Generic i2c master transfer entrypoint.
|
|
+ */
|
|
+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
|
|
+{
|
|
+ struct atmel_twi *twi = to_atmel_twi(adap);
|
|
+ int i;
|
|
+
|
|
+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
|
|
+
|
|
+ twi->status = 0;
|
|
+ for (i = 0; i < num; i++, pmsg++) {
|
|
+ twi->len = pmsg->len;
|
|
+ twi->buf = pmsg->buf;
|
|
+ twi->acks_left = pmsg->len;
|
|
+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
|
|
+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
|
|
+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
|
|
+
|
|
+ dev_dbg(&adap->dev,
|
|
+ "#%d: %s %d byte%s %s dev 0x%02x\n",
|
|
+ i,
|
|
+ pmsg->flags & I2C_M_RD ? "reading" : "writing",
|
|
+ pmsg->len,
|
|
+ pmsg->len > 1 ? "s" : "",
|
|
+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
|
|
+
|
|
+ /* enable */
|
|
+ twi_writel(twi, CR, TWI_BIT(MSEN));
|
|
+
|
|
+ if (pmsg->flags & I2C_M_RD) {
|
|
+ /* cleanup after previous RX overruns */
|
|
+ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
|
|
+ twi_readl(twi, RHR);
|
|
+
|
|
+ if (twi->len == 1)
|
|
+ twi_writel(twi, CR,
|
|
+ TWI_BIT(START) | TWI_BIT(STOP));
|
|
+ else
|
|
+ twi_writel(twi, CR, TWI_BIT(START));
|
|
+
|
|
+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
|
|
+ dev_dbg(&adap->dev, "RX[%d] timeout. "
|
|
+ "Stopped with %d bytes left\n",
|
|
+ i, twi->acks_left);
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+ } else {
|
|
+ twi_writel(twi, THR, twi->buf[0]);
|
|
+ twi->acks_left--;
|
|
+ /* REVISIT: some chips don't start automagically:
|
|
+ * twi_writel(twi, CR, TWI_BIT(START));
|
|
+ */
|
|
+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
|
|
+ dev_dbg(&adap->dev, "TX[%d] timeout. "
|
|
+ "Stopped with %d bytes left\n",
|
|
+ i, twi->acks_left);
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+ /* REVISIT: an erratum workaround may be needed here;
|
|
+ * see sam9261 "STOP not generated" (START either).
|
|
+ */
|
|
+ }
|
|
+
|
|
+ /* Disable TWI interface */
|
|
+ twi_writel(twi, CR, TWI_BIT(MSDIS));
|
|
+
|
|
+ if (twi->status)
|
|
+ return twi->status;
|
|
+
|
|
+ /* WARNING: This driver lies about properly supporting
|
|
+ * repeated start, or it would *ALWAYS* return here. It
|
|
+ * has issued a STOP. Continuing is a false claim -- that
|
|
+ * a second (or third, etc.) message is part of the same
|
|
+ * "combined" (no STOPs between parts) message.
|
|
+ */
|
|
+
|
|
+ } /* end cur msg */
|
|
+
|
|
+ return i;
|
|
+}
|
|
+
|
|
+
|
|
+static irqreturn_t twi_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct atmel_twi *twi = dev_id;
|
|
+ int status = twi_readl(twi, SR);
|
|
+
|
|
+ /* Save state for later debug prints */
|
|
+ int old_status = status;
|
|
+
|
|
+ if (twi->mask & status) {
|
|
+
|
|
+ status &= twi->mask;
|
|
+
|
|
+ if (status & TWI_BIT(RXRDY)) {
|
|
+ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
|
|
+ /* Note weakness in fault reporting model:
|
|
+ * we can't say "the first N of these data
|
|
+ * bytes are valid".
|
|
+ */
|
|
+ dev_err(&twi->adapter.dev,
|
|
+ "OVERRUN RX! %04x, lost %d\n",
|
|
+ old_status, twi->acks_left);
|
|
+ twi->acks_left = 0;
|
|
+ twi_writel(twi, CR, TWI_BIT(STOP));
|
|
+ twi->status = -EOVERFLOW;
|
|
+ } else if (twi->acks_left > 0) {
|
|
+ twi->buf[twi->len - twi->acks_left] =
|
|
+ twi_readl(twi, RHR);
|
|
+ twi->acks_left--;
|
|
+ }
|
|
+ if (status & TWI_BIT(TXCOMP))
|
|
+ goto done;
|
|
+ if (twi->acks_left == 1)
|
|
+ twi_writel(twi, CR, TWI_BIT(STOP));
|
|
+
|
|
+ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
|
|
+ goto done;
|
|
+
|
|
+ } else if (status & TWI_BIT(TXRDY)) {
|
|
+ if (twi->acks_left > 0) {
|
|
+ twi->acks_left--;
|
|
+ twi_writel(twi, THR,
|
|
+ twi->buf[twi->len - twi->acks_left]);
|
|
+ } else
|
|
+ twi_writel(twi, CR, TWI_BIT(STOP));
|
|
+ }
|
|
+
|
|
+ if (twi->acks_left == 0)
|
|
+ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
|
|
+ }
|
|
+
|
|
+ /* enabling this message helps trigger overruns/underruns ... */
|
|
+ dev_vdbg(&twi->adapter.dev,
|
|
+ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
|
|
+ old_status,
|
|
+ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
|
|
+ twi->acks_left);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+
|
|
+done:
|
|
+ /* Note weak fault reporting model: we can't report how many
|
|
+ * bytes we sent before the NAK, or let upper layers choose
|
|
+ * whether to continue. The I2C stack doesn't allow that...
|
|
+ */
|
|
+ if (status & TWI_BIT(NACK)) {
|
|
+ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
|
|
+ twi->acks_left);
|
|
+ twi->status = -EPIPE;
|
|
+
|
|
+ /* TX underrun morphs automagically into a premature STOP;
|
|
+ * we'll probably observe UVRE even when it's not documented.
|
|
+ */
|
|
+ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
|
|
+ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
|
|
+ old_status, twi->acks_left);
|
|
+ twi->status = -ENOSR;
|
|
+ }
|
|
+
|
|
+ twi_writel(twi, IDR, ~0UL);
|
|
+ complete(&twi->comp);
|
|
+
|
|
+ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
|
|
+ old_status, twi->acks_left, twi->status);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Return list of supported functionality.
|
|
+ *
|
|
+ * NOTE: see warning above about repeated starts; this driver is falsely
|
|
+ * claiming to support "combined" transfers. The mid-message STOPs mean
|
|
+ * some slaves will never work with this driver. (Use i2c-gpio...)
|
|
+ */
|
|
+static u32 twi_func(struct i2c_adapter *adapter)
|
|
+{
|
|
+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
|
|
+ & ~I2C_FUNC_SMBUS_QUICK;
|
|
+}
|
|
+
|
|
+static struct i2c_algorithm twi_algorithm = {
|
|
+ .master_xfer = twi_xfer,
|
|
+ .functionality = twi_func,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * Main initialization routine.
|
|
+ */
|
|
+static int __init twi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct atmel_twi *twi;
|
|
+ struct resource *regs;
|
|
+ struct clk *pclk;
|
|
+ struct i2c_adapter *adapter;
|
|
+ int rc, irq;
|
|
+
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!regs)
|
|
+ return -ENXIO;
|
|
+
|
|
+ pclk = clk_get(&pdev->dev, "twi_pclk");
|
|
+ if (IS_ERR(pclk))
|
|
+ return PTR_ERR(pclk);
|
|
+ clk_enable(pclk);
|
|
+
|
|
+ rc = -ENOMEM;
|
|
+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
|
|
+ if (!twi) {
|
|
+ dev_dbg(&pdev->dev, "can't allocate interface!\n");
|
|
+ goto err_alloc_twi;
|
|
+ }
|
|
+
|
|
+ twi->pclk = pclk;
|
|
+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
+ if (!twi->regs)
|
|
+ goto err_ioremap;
|
|
+
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
|
|
+ if (rc) {
|
|
+ dev_dbg(&pdev->dev, "can't bind irq!\n");
|
|
+ goto err_irq;
|
|
+ }
|
|
+ twi->irq = irq;
|
|
+
|
|
+ rc = twi_hwinit(twi);
|
|
+ if (rc) {
|
|
+ dev_err(&pdev->dev, "Unable to set baudrate\n");
|
|
+ goto err_hw_init;
|
|
+ }
|
|
+
|
|
+ adapter = &twi->adapter;
|
|
+ sprintf(adapter->name, "TWI");
|
|
+ adapter->algo = &twi_algorithm;
|
|
+ adapter->class = I2C_CLASS_ALL;
|
|
+ adapter->nr = pdev->id;
|
|
+ adapter->dev.parent = &pdev->dev;
|
|
+
|
|
+ platform_set_drvdata(pdev, twi);
|
|
+
|
|
+ rc = i2c_add_numbered_adapter(adapter);
|
|
+ if (rc) {
|
|
+ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
|
|
+ adapter->name);
|
|
+ goto err_register;
|
|
+ }
|
|
+
|
|
+ dev_info(&pdev->dev,
|
|
+ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
|
|
+ baudrate/1000, (unsigned long)regs->start);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+
|
|
+err_register:
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+
|
|
+err_hw_init:
|
|
+ free_irq(irq, twi);
|
|
+
|
|
+err_irq:
|
|
+ iounmap(twi->regs);
|
|
+
|
|
+err_ioremap:
|
|
+ kfree(twi);
|
|
+
|
|
+err_alloc_twi:
|
|
+ clk_disable(pclk);
|
|
+ clk_put(pclk);
|
|
+
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+static int __exit twi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct atmel_twi *twi = platform_get_drvdata(pdev);
|
|
+ int res;
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ res = i2c_del_adapter(&twi->adapter);
|
|
+ twi_writel(twi, CR, TWI_BIT(MSDIS));
|
|
+ iounmap(twi->regs);
|
|
+ clk_disable(twi->pclk);
|
|
+ clk_put(twi->pclk);
|
|
+ free_irq(twi->irq, twi);
|
|
+ kfree(twi);
|
|
+
|
|
+ return res;
|
|
+}
|
|
+
|
|
+static struct platform_driver twi_driver = {
|
|
+ .remove = __exit_p(twi_remove),
|
|
+ .driver = {
|
|
+ .name = "atmel_twi",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init atmel_twi_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&twi_driver, twi_probe);
|
|
+}
|
|
+
|
|
+static void __exit atmel_twi_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&twi_driver);
|
|
+}
|
|
+
|
|
+module_init(atmel_twi_init);
|
|
+module_exit(atmel_twi_exit);
|
|
+
|
|
+MODULE_AUTHOR("Espen Krangnes");
|
|
+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
|
|
+MODULE_LICENSE("GPL");
|
|
diff --git a/drivers/i2c/busses/i2c-atmeltwi.h b/drivers/i2c/busses/i2c-atmeltwi.h
|
|
new file mode 100644
|
|
index 0000000..1aca065
|
|
--- /dev/null
|
|
+++ b/drivers/i2c/busses/i2c-atmeltwi.h
|
|
@@ -0,0 +1,117 @@
|
|
+/*
|
|
+ * Register definitions for the Atmel Two-Wire Interface
|
|
+ */
|
|
+
|
|
+#ifndef __ATMELTWI_H__
|
|
+#define __ATMELTWI_H__
|
|
+
|
|
+/* TWI register offsets */
|
|
+#define TWI_CR 0x0000
|
|
+#define TWI_MMR 0x0004
|
|
+#define TWI_SMR 0x0008
|
|
+#define TWI_IADR 0x000c
|
|
+#define TWI_CWGR 0x0010
|
|
+#define TWI_SR 0x0020
|
|
+#define TWI_IER 0x0024
|
|
+#define TWI_IDR 0x0028
|
|
+#define TWI_IMR 0x002c
|
|
+#define TWI_RHR 0x0030
|
|
+#define TWI_THR 0x0034
|
|
+
|
|
+/* Bitfields in CR */
|
|
+#define TWI_START_OFFSET 0
|
|
+#define TWI_START_SIZE 1
|
|
+#define TWI_STOP_OFFSET 1
|
|
+#define TWI_STOP_SIZE 1
|
|
+#define TWI_MSEN_OFFSET 2
|
|
+#define TWI_MSEN_SIZE 1
|
|
+#define TWI_MSDIS_OFFSET 3
|
|
+#define TWI_MSDIS_SIZE 1
|
|
+#define TWI_SVEN_OFFSET 4
|
|
+#define TWI_SVEN_SIZE 1
|
|
+#define TWI_SVDIS_OFFSET 5
|
|
+#define TWI_SVDIS_SIZE 1
|
|
+#define TWI_SWRST_OFFSET 7
|
|
+#define TWI_SWRST_SIZE 1
|
|
+
|
|
+/* Bitfields in MMR */
|
|
+#define TWI_IADRSZ_OFFSET 8
|
|
+#define TWI_IADRSZ_SIZE 2
|
|
+#define TWI_MREAD_OFFSET 12
|
|
+#define TWI_MREAD_SIZE 1
|
|
+#define TWI_DADR_OFFSET 16
|
|
+#define TWI_DADR_SIZE 7
|
|
+
|
|
+/* Bitfields in SMR */
|
|
+#define TWI_SADR_OFFSET 16
|
|
+#define TWI_SADR_SIZE 7
|
|
+
|
|
+/* Bitfields in IADR */
|
|
+#define TWI_IADR_OFFSET 0
|
|
+#define TWI_IADR_SIZE 24
|
|
+
|
|
+/* Bitfields in CWGR */
|
|
+#define TWI_CLDIV_OFFSET 0
|
|
+#define TWI_CLDIV_SIZE 8
|
|
+#define TWI_CHDIV_OFFSET 8
|
|
+#define TWI_CHDIV_SIZE 8
|
|
+#define TWI_CKDIV_OFFSET 16
|
|
+#define TWI_CKDIV_SIZE 3
|
|
+
|
|
+/* Bitfields in SR */
|
|
+#define TWI_TXCOMP_OFFSET 0
|
|
+#define TWI_TXCOMP_SIZE 1
|
|
+#define TWI_RXRDY_OFFSET 1
|
|
+#define TWI_RXRDY_SIZE 1
|
|
+#define TWI_TXRDY_OFFSET 2
|
|
+#define TWI_TXRDY_SIZE 1
|
|
+#define TWI_SVDIR_OFFSET 3
|
|
+#define TWI_SVDIR_SIZE 1
|
|
+#define TWI_SVACC_OFFSET 4
|
|
+#define TWI_SVACC_SIZE 1
|
|
+#define TWI_GCACC_OFFSET 5
|
|
+#define TWI_GCACC_SIZE 1
|
|
+#define TWI_OVRE_OFFSET 6
|
|
+#define TWI_OVRE_SIZE 1
|
|
+#define TWI_UNRE_OFFSET 7
|
|
+#define TWI_UNRE_SIZE 1
|
|
+#define TWI_NACK_OFFSET 8
|
|
+#define TWI_NACK_SIZE 1
|
|
+#define TWI_ARBLST_OFFSET 9
|
|
+#define TWI_ARBLST_SIZE 1
|
|
+
|
|
+/* Bitfields in RHR */
|
|
+#define TWI_RXDATA_OFFSET 0
|
|
+#define TWI_RXDATA_SIZE 8
|
|
+
|
|
+/* Bitfields in THR */
|
|
+#define TWI_TXDATA_OFFSET 0
|
|
+#define TWI_TXDATA_SIZE 8
|
|
+
|
|
+/* Constants for IADRSZ */
|
|
+#define TWI_IADRSZ_NO_ADDR 0
|
|
+#define TWI_IADRSZ_ONE_BYTE 1
|
|
+#define TWI_IADRSZ_TWO_BYTES 2
|
|
+#define TWI_IADRSZ_THREE_BYTES 3
|
|
+
|
|
+/* Bit manipulation macros */
|
|
+#define TWI_BIT(name) \
|
|
+ (1 << TWI_##name##_OFFSET)
|
|
+#define TWI_BF(name, value) \
|
|
+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
|
|
+ << TWI_##name##_OFFSET)
|
|
+#define TWI_BFEXT(name, value) \
|
|
+ (((value) >> TWI_##name##_OFFSET) \
|
|
+ & ((1 << TWI_##name##_SIZE) - 1))
|
|
+#define TWI_BFINS(name, value, old) \
|
|
+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
|
|
+ << TWI_##name##_OFFSET)) \
|
|
+ | TWI_BF(name, (value)))
|
|
+
|
|
+/* Register access macros */
|
|
+#define twi_readl(port, reg) \
|
|
+ __raw_readl((port)->regs + TWI_##reg)
|
|
+#define twi_writel(port, reg, value) \
|
|
+ __raw_writel((value), (port)->regs + TWI_##reg)
|
|
+
|
|
+#endif /* __ATMELTWI_H__ */
|
|
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
|
|
index ec568fa..4e1db3b 100644
|
|
--- a/drivers/leds/Kconfig
|
|
+++ b/drivers/leds/Kconfig
|
|
@@ -18,6 +18,13 @@ config LEDS_CLASS
|
|
|
|
comment "LED drivers"
|
|
|
|
+config LEDS_ATMEL_PWM
|
|
+ tristate "LED Support using Atmel PWM outputs"
|
|
+ depends on LEDS_CLASS && ATMEL_PWM
|
|
+ help
|
|
+ This option enables support for LEDs driven using outputs
|
|
+ of the dedicated PWM controller found on newer Atmel SOCs.
|
|
+
|
|
config LEDS_CORGI
|
|
tristate "LED Support for the Sharp SL-C7x0 series"
|
|
depends on LEDS_CLASS && PXA_SHARP_C7xx
|
|
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
|
|
index a60de1b..04bc850 100644
|
|
--- a/drivers/leds/Makefile
|
|
+++ b/drivers/leds/Makefile
|
|
@@ -5,6 +5,7 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
|
|
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
|
|
|
|
# LED Platform Drivers
|
|
+obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
|
|
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
|
|
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
|
|
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
|
|
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
|
|
new file mode 100644
|
|
index 0000000..187031c
|
|
--- /dev/null
|
|
+++ b/drivers/leds/leds-atmel-pwm.c
|
|
@@ -0,0 +1,155 @@
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/leds.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/atmel_pwm.h>
|
|
+
|
|
+
|
|
+struct pwmled {
|
|
+ struct led_classdev cdev;
|
|
+ struct pwm_channel pwmc;
|
|
+ struct gpio_led *desc;
|
|
+ u32 mult;
|
|
+ u8 active_low;
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * For simplicity, we use "brightness" as if it were a linear function
|
|
+ * of PWM duty cycle. However, a logarithmic function of duty cycle is
|
|
+ * probably a better match for perceived brightness: two is half as bright
|
|
+ * as four, four is half as bright as eight, etc
|
|
+ */
|
|
+static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
|
|
+{
|
|
+ struct pwmled *led;
|
|
+
|
|
+ /* update the duty cycle for the *next* period */
|
|
+ led = container_of(cdev, struct pwmled, cdev);
|
|
+ pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * NOTE: we reuse the platform_data structure of GPIO leds,
|
|
+ * but repurpose its "gpio" number as a PWM channel number.
|
|
+ */
|
|
+static int __init pwmled_probe(struct platform_device *pdev)
|
|
+{
|
|
+ const struct gpio_led_platform_data *pdata;
|
|
+ struct pwmled *leds;
|
|
+ unsigned i;
|
|
+ int status;
|
|
+
|
|
+ pdata = pdev->dev.platform_data;
|
|
+ if (!pdata || pdata->num_leds < 1)
|
|
+ return -ENODEV;
|
|
+
|
|
+ leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
|
|
+ if (!leds)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ for (i = 0; i < pdata->num_leds; i++) {
|
|
+ struct pwmled *led = leds + i;
|
|
+ const struct gpio_led *dat = pdata->leds + i;
|
|
+ u32 tmp;
|
|
+
|
|
+ led->cdev.name = dat->name;
|
|
+ led->cdev.brightness = LED_OFF;
|
|
+ led->cdev.brightness_set = pwmled_brightness;
|
|
+ led->cdev.default_trigger = dat->default_trigger;
|
|
+
|
|
+ led->active_low = dat->active_low;
|
|
+
|
|
+ status = pwm_channel_alloc(dat->gpio, &led->pwmc);
|
|
+ if (status < 0)
|
|
+ goto err;
|
|
+
|
|
+ /*
|
|
+ * Prescale clock by 2^x, so PWM counts in low MHz.
|
|
+ * Start each cycle with the LED active, so increasing
|
|
+ * the duty cycle gives us more time on (== brighter).
|
|
+ */
|
|
+ tmp = 5;
|
|
+ if (!led->active_low)
|
|
+ tmp |= PWM_CPR_CPOL;
|
|
+ pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
|
|
+
|
|
+ /*
|
|
+ * Pick a period so PWM cycles at 100+ Hz; and a multiplier
|
|
+ * for scaling duty cycle: brightness * mult.
|
|
+ */
|
|
+ tmp = (led->pwmc.mck / (1 << 5)) / 100;
|
|
+ tmp /= 255;
|
|
+ led->mult = tmp;
|
|
+ pwm_channel_writel(&led->pwmc, PWM_CDTY,
|
|
+ led->cdev.brightness * 255);
|
|
+ pwm_channel_writel(&led->pwmc, PWM_CPRD,
|
|
+ LED_FULL * tmp);
|
|
+
|
|
+ pwm_channel_enable(&led->pwmc);
|
|
+
|
|
+ /* Hand it over to the LED framework */
|
|
+ status = led_classdev_register(&pdev->dev, &led->cdev);
|
|
+ if (status < 0) {
|
|
+ pwm_channel_free(&led->pwmc);
|
|
+ goto err;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ platform_set_drvdata(pdev, leds);
|
|
+ return 0;
|
|
+
|
|
+err:
|
|
+ while (i-- > 0) {
|
|
+ led_classdev_unregister(&leds[i].cdev);
|
|
+ pwm_channel_free(&leds[i].pwmc);
|
|
+ }
|
|
+ kfree(leds);
|
|
+
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static int __exit pwmled_remove(struct platform_device *pdev)
|
|
+{
|
|
+ const struct gpio_led_platform_data *pdata;
|
|
+ struct pwmled *leds;
|
|
+ unsigned i;
|
|
+
|
|
+ pdata = pdev->dev.platform_data;
|
|
+ leds = platform_get_drvdata(pdev);
|
|
+
|
|
+ for (i = 0; i < pdata->num_leds; i++) {
|
|
+ struct pwmled *led = leds + i;
|
|
+
|
|
+ led_classdev_unregister(&led->cdev);
|
|
+ pwm_channel_free(&led->pwmc);
|
|
+ }
|
|
+
|
|
+ kfree(leds);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver pwmled_driver = {
|
|
+ .driver = {
|
|
+ .name = "leds-atmel-pwm",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ /* REVISIT add suspend() and resume() methods */
|
|
+ .remove = __exit_p(pwmled_remove),
|
|
+};
|
|
+
|
|
+static int __init modinit(void)
|
|
+{
|
|
+ return platform_driver_probe(&pwmled_driver, pwmled_probe);
|
|
+}
|
|
+module_init(modinit);
|
|
+
|
|
+static void __exit modexit(void)
|
|
+{
|
|
+ platform_driver_unregister(&pwmled_driver);
|
|
+}
|
|
+module_exit(modexit);
|
|
+
|
|
+MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
|
|
+MODULE_LICENSE("GPL");
|
|
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
|
|
index b5e67c0..23a9231 100644
|
|
--- a/drivers/misc/Kconfig
|
|
+++ b/drivers/misc/Kconfig
|
|
@@ -13,6 +13,15 @@ menuconfig MISC_DEVICES
|
|
|
|
if MISC_DEVICES
|
|
|
|
+config ATMEL_PWM
|
|
+ tristate "Atmel AT32/AT91 PWM support"
|
|
+ depends on AVR32 || ARCH_AT91
|
|
+ help
|
|
+ This option enables device driver support for the PWM channels
|
|
+ on certain Atmel prcoessors. Pulse Width Modulation is used for
|
|
+ purposes including software controlled power-efficent backlights
|
|
+ on LCD displays, motor control, and waveform generation.
|
|
+
|
|
config IBM_ASM
|
|
tristate "Device driver for IBM RSA service processor"
|
|
depends on X86 && PCI && INPUT && EXPERIMENTAL
|
|
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
|
|
index 87f2685..b4674c6 100644
|
|
--- a/drivers/misc/Makefile
|
|
+++ b/drivers/misc/Makefile
|
|
@@ -7,6 +7,7 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/
|
|
obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/
|
|
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
|
|
obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
|
|
+obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
|
|
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
|
|
obj-$(CONFIG_LKDTM) += lkdtm.o
|
|
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
|
|
diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
|
|
new file mode 100644
|
|
index 0000000..f8d3b9a
|
|
--- /dev/null
|
|
+++ b/drivers/misc/atmel_pwm.c
|
|
@@ -0,0 +1,409 @@
|
|
+#include <linux/module.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/atmel_pwm.h>
|
|
+
|
|
+
|
|
+/*
|
|
+ * This is a simple driver for the PWM controller found in various newer
|
|
+ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
|
|
+ *
|
|
+ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
|
|
+ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
|
|
+ * Docs are inconsistent about the width of the channel counter registers;
|
|
+ * it's at least 16 bits, but several places say 20 bits.
|
|
+ */
|
|
+#define PWM_NCHAN 4 /* max 32 */
|
|
+
|
|
+struct pwm {
|
|
+ spinlock_t lock;
|
|
+ struct platform_device *pdev;
|
|
+ u32 mask;
|
|
+ int irq;
|
|
+ void __iomem *base;
|
|
+ struct clk *clk;
|
|
+ struct pwm_channel *channel[PWM_NCHAN];
|
|
+ void (*handler[PWM_NCHAN])(struct pwm_channel *);
|
|
+};
|
|
+
|
|
+
|
|
+/* global PWM controller registers */
|
|
+#define PWM_MR 0x00
|
|
+#define PWM_ENA 0x04
|
|
+#define PWM_DIS 0x08
|
|
+#define PWM_SR 0x0c
|
|
+#define PWM_IER 0x10
|
|
+#define PWM_IDR 0x14
|
|
+#define PWM_IMR 0x18
|
|
+#define PWM_ISR 0x1c
|
|
+
|
|
+static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
|
|
+{
|
|
+ __raw_writel(val, p->base + offset);
|
|
+}
|
|
+
|
|
+static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
|
|
+{
|
|
+ return __raw_readl(p->base + offset);
|
|
+}
|
|
+
|
|
+static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
|
|
+{
|
|
+ return p->base + 0x200 + index * 0x20;
|
|
+}
|
|
+
|
|
+static struct pwm *pwm;
|
|
+
|
|
+static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
|
|
+{
|
|
+ struct device *dev = &pwm->pdev->dev;
|
|
+
|
|
+ dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
|
|
+ tag,
|
|
+ pwm_readl(pwm, PWM_MR),
|
|
+ pwm_readl(pwm, PWM_SR),
|
|
+ pwm_readl(pwm, PWM_IMR));
|
|
+ dev_dbg(dev,
|
|
+ "pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
|
|
+ ch->index,
|
|
+ pwm_channel_readl(ch, PWM_CMR),
|
|
+ pwm_channel_readl(ch, PWM_CDTY),
|
|
+ pwm_channel_readl(ch, PWM_CPRD),
|
|
+ pwm_channel_readl(ch, PWM_CCNT));
|
|
+}
|
|
+
|
|
+
|
|
+/**
|
|
+ * pwm_channel_alloc - allocate an unused PWM channel
|
|
+ * @index: identifies the channel
|
|
+ * @ch: structure to be initialized
|
|
+ *
|
|
+ * Drivers allocate PWM channels according to the board's wiring, and
|
|
+ * matching board-specific setup code. Returns zero or negative errno.
|
|
+ */
|
|
+int pwm_channel_alloc(int index, struct pwm_channel *ch)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ int status = 0;
|
|
+
|
|
+ /* insist on PWM init, with this signal pinned out */
|
|
+ if (!pwm || !(pwm->mask & 1 << index))
|
|
+ return -ENODEV;
|
|
+
|
|
+ if (index < 0 || index >= PWM_NCHAN || !ch)
|
|
+ return -EINVAL;
|
|
+ memset(ch, 0, sizeof *ch);
|
|
+
|
|
+ spin_lock_irqsave(&pwm->lock, flags);
|
|
+ if (pwm->channel[index])
|
|
+ status = -EBUSY;
|
|
+ else {
|
|
+ clk_enable(pwm->clk);
|
|
+
|
|
+ ch->regs = pwmc_regs(pwm, index);
|
|
+ ch->index = index;
|
|
+
|
|
+ /* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
|
|
+ ch->mck = clk_get_rate(pwm->clk);
|
|
+
|
|
+ pwm->channel[index] = ch;
|
|
+ pwm->handler[index] = NULL;
|
|
+
|
|
+ /* channel and irq are always disabled when we return */
|
|
+ pwm_writel(pwm, PWM_DIS, 1 << index);
|
|
+ pwm_writel(pwm, PWM_IDR, 1 << index);
|
|
+ }
|
|
+ spin_unlock_irqrestore(&pwm->lock, flags);
|
|
+ return status;
|
|
+}
|
|
+EXPORT_SYMBOL(pwm_channel_alloc);
|
|
+
|
|
+static int pwmcheck(struct pwm_channel *ch)
|
|
+{
|
|
+ int index;
|
|
+
|
|
+ if (!pwm)
|
|
+ return -ENODEV;
|
|
+ if (!ch)
|
|
+ return -EINVAL;
|
|
+ index = ch->index;
|
|
+ if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
|
|
+ return -EINVAL;
|
|
+
|
|
+ return index;
|
|
+}
|
|
+
|
|
+/**
|
|
+ * pwm_channel_free - release a previously allocated channel
|
|
+ * @ch: the channel being released
|
|
+ *
|
|
+ * The channel is completely shut down (counter and IRQ disabled),
|
|
+ * and made available for re-use. Returns zero, or negative errno.
|
|
+ */
|
|
+int pwm_channel_free(struct pwm_channel *ch)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ int t;
|
|
+
|
|
+ spin_lock_irqsave(&pwm->lock, flags);
|
|
+ t = pwmcheck(ch);
|
|
+ if (t >= 0) {
|
|
+ pwm->channel[t] = NULL;
|
|
+ pwm->handler[t] = NULL;
|
|
+
|
|
+ /* channel and irq are always disabled when we return */
|
|
+ pwm_writel(pwm, PWM_DIS, 1 << t);
|
|
+ pwm_writel(pwm, PWM_IDR, 1 << t);
|
|
+
|
|
+ clk_disable(pwm->clk);
|
|
+ t = 0;
|
|
+ }
|
|
+ spin_unlock_irqrestore(&pwm->lock, flags);
|
|
+ return t;
|
|
+}
|
|
+EXPORT_SYMBOL(pwm_channel_free);
|
|
+
|
|
+int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ int t;
|
|
+
|
|
+ /* OMITTED FUNCTIONALITY: starting several channels in synch */
|
|
+
|
|
+ spin_lock_irqsave(&pwm->lock, flags);
|
|
+ t = pwmcheck(ch);
|
|
+ if (t >= 0) {
|
|
+ pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
|
|
+ t = 0;
|
|
+ pwm_dumpregs(ch, enabled ? "enable" : "disable");
|
|
+ }
|
|
+ spin_unlock_irqrestore(&pwm->lock, flags);
|
|
+
|
|
+ return t;
|
|
+}
|
|
+EXPORT_SYMBOL(__pwm_channel_onoff);
|
|
+
|
|
+/**
|
|
+ * pwm_clk_alloc - allocate and configure CLKA or CLKB
|
|
+ * @prescale: from 0..10, the power of two used to divide MCK
|
|
+ * @div: from 1..255, the linear divisor to use
|
|
+ *
|
|
+ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno. The allocated
|
|
+ * clock will run with a period of (2^prescale * div) / MCK, or twice as
|
|
+ * long if center aligned PWM output is used. The clock must later be
|
|
+ * deconfigured using pwm_clk_free().
|
|
+ */
|
|
+int pwm_clk_alloc(unsigned prescale, unsigned div)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u32 mr;
|
|
+ u32 val = (prescale << 8) | div;
|
|
+ int ret = -EBUSY;
|
|
+
|
|
+ if (prescale >= 10 || div == 0 || div > 255)
|
|
+ return -EINVAL;
|
|
+
|
|
+ spin_lock_irqsave(&pwm->lock, flags);
|
|
+ mr = pwm_readl(pwm, PWM_MR);
|
|
+ if ((mr & 0xffff) == 0) {
|
|
+ mr |= val;
|
|
+ ret = PWM_CPR_CLKA;
|
|
+ }
|
|
+ if ((mr & (0xffff << 16)) == 0) {
|
|
+ mr |= val << 16;
|
|
+ ret = PWM_CPR_CLKB;
|
|
+ }
|
|
+ if (ret > 0)
|
|
+ pwm_writel(pwm, PWM_MR, mr);
|
|
+ spin_unlock_irqrestore(&pwm->lock, flags);
|
|
+ return ret;
|
|
+}
|
|
+EXPORT_SYMBOL(pwm_clk_alloc);
|
|
+
|
|
+/**
|
|
+ * pwm_clk_free - deconfigure and release CLKA or CLKB
|
|
+ *
|
|
+ * Reverses the effect of pwm_clk_alloc().
|
|
+ */
|
|
+void pwm_clk_free(unsigned clk)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u32 mr;
|
|
+
|
|
+ spin_lock_irqsave(&pwm->lock, flags);
|
|
+ mr = pwm_readl(pwm, PWM_MR);
|
|
+ if (clk == PWM_CPR_CLKA)
|
|
+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
|
|
+ if (clk == PWM_CPR_CLKB)
|
|
+ pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
|
|
+ spin_unlock_irqrestore(&pwm->lock, flags);
|
|
+}
|
|
+EXPORT_SYMBOL(pwm_clk_free);
|
|
+
|
|
+/**
|
|
+ * pwm_channel_handler - manage channel's IRQ handler
|
|
+ * @ch: the channel
|
|
+ * @handler: the handler to use, possibly NULL
|
|
+ *
|
|
+ * If the handler is non-null, the handler will be called after every
|
|
+ * period of this PWM channel. If the handler is null, this channel
|
|
+ * won't generate an IRQ.
|
|
+ */
|
|
+int pwm_channel_handler(struct pwm_channel *ch,
|
|
+ void (*handler)(struct pwm_channel *ch))
|
|
+{
|
|
+ unsigned long flags;
|
|
+ int t;
|
|
+
|
|
+ spin_lock_irqsave(&pwm->lock, flags);
|
|
+ t = pwmcheck(ch);
|
|
+ if (t >= 0) {
|
|
+ pwm->handler[t] = handler;
|
|
+ pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
|
|
+ t = 0;
|
|
+ }
|
|
+ spin_unlock_irqrestore(&pwm->lock, flags);
|
|
+
|
|
+ return t;
|
|
+}
|
|
+EXPORT_SYMBOL(pwm_channel_handler);
|
|
+
|
|
+static irqreturn_t pwm_irq(int id, void *_pwm)
|
|
+{
|
|
+ struct pwm *p = _pwm;
|
|
+ irqreturn_t handled = IRQ_NONE;
|
|
+ u32 irqstat;
|
|
+ int index;
|
|
+
|
|
+ spin_lock(&p->lock);
|
|
+
|
|
+ /* ack irqs, then handle them */
|
|
+ irqstat = pwm_readl(pwm, PWM_ISR);
|
|
+
|
|
+ while (irqstat) {
|
|
+ struct pwm_channel *ch;
|
|
+ void (*handler)(struct pwm_channel *ch);
|
|
+
|
|
+ index = ffs(irqstat) - 1;
|
|
+ irqstat &= ~(1 << index);
|
|
+ ch = pwm->channel[index];
|
|
+ handler = pwm->handler[index];
|
|
+ if (handler && ch) {
|
|
+ spin_unlock(&p->lock);
|
|
+ handler(ch);
|
|
+ spin_lock(&p->lock);
|
|
+ handled = IRQ_HANDLED;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ spin_unlock(&p->lock);
|
|
+ return handled;
|
|
+}
|
|
+
|
|
+static int __init pwm_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ int irq = platform_get_irq(pdev, 0);
|
|
+ u32 *mp = pdev->dev.platform_data;
|
|
+ struct pwm *p;
|
|
+ int status = -EIO;
|
|
+
|
|
+ if (pwm)
|
|
+ return -EBUSY;
|
|
+ if (!r || irq < 0 || !mp || !*mp)
|
|
+ return -ENODEV;
|
|
+ if (*mp & ~((1<<PWM_NCHAN)-1)) {
|
|
+ dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
|
|
+ *mp, PWM_NCHAN);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
|
|
+ if (!p)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ spin_lock_init(&p->lock);
|
|
+ p->pdev = pdev;
|
|
+ p->mask = *mp;
|
|
+ p->irq = irq;
|
|
+ p->base = ioremap(r->start, r->end - r->start + 1);
|
|
+ if (!p->base)
|
|
+ goto fail;
|
|
+ p->clk = clk_get(&pdev->dev, "mck");
|
|
+ if (IS_ERR(p->clk)) {
|
|
+ status = PTR_ERR(p->clk);
|
|
+ p->clk = NULL;
|
|
+ goto fail;
|
|
+ }
|
|
+
|
|
+ status = request_irq(irq, pwm_irq, 0, pdev->name, p);
|
|
+ if (status < 0)
|
|
+ goto fail;
|
|
+
|
|
+ pwm = p;
|
|
+ platform_set_drvdata(pdev, p);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+fail:
|
|
+ if (p->clk)
|
|
+ clk_put(p->clk);
|
|
+ if (p->base)
|
|
+ iounmap(p->base);
|
|
+
|
|
+ kfree(p);
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static int __exit pwm_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct pwm *p = platform_get_drvdata(pdev);
|
|
+
|
|
+ if (p != pwm)
|
|
+ return -EINVAL;
|
|
+
|
|
+ clk_enable(pwm->clk);
|
|
+ pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
|
|
+ pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
|
|
+ clk_disable(pwm->clk);
|
|
+
|
|
+ pwm = NULL;
|
|
+
|
|
+ free_irq(p->irq, p);
|
|
+ clk_put(p->clk);
|
|
+ iounmap(p->base);
|
|
+ kfree(p);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver atmel_pwm_driver = {
|
|
+ .driver = {
|
|
+ .name = "atmel_pwm",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ .remove = __exit_p(pwm_remove),
|
|
+
|
|
+ /* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
|
|
+ * and all AT91sam9263 states, albeit at reduced clock rate if
|
|
+ * MCK becomes the slow clock (i.e. what Linux labels STR).
|
|
+ */
|
|
+};
|
|
+
|
|
+static int __init pwm_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
|
|
+}
|
|
+module_init(pwm_init);
|
|
+
|
|
+static void __exit pwm_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&atmel_pwm_driver);
|
|
+}
|
|
+module_exit(pwm_exit);
|
|
+
|
|
+MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
|
|
+MODULE_LICENSE("GPL");
|
|
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
|
|
index 5fef678..4970b53 100644
|
|
--- a/drivers/mmc/host/Kconfig
|
|
+++ b/drivers/mmc/host/Kconfig
|
|
@@ -91,6 +91,16 @@ config MMC_AT91
|
|
|
|
If unsure, say N.
|
|
|
|
+config MMC_ATMELMCI
|
|
+ tristate "Atmel Multimedia Card Interface support"
|
|
+ depends on AVR32 && MMC
|
|
+ help
|
|
+ This selects the Atmel Multimedia Card Interface. If you have
|
|
+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
|
|
+ slot, say Y or M here.
|
|
+
|
|
+ If unsure, say N.
|
|
+
|
|
config MMC_IMX
|
|
tristate "Motorola i.MX Multimedia Card Interface support"
|
|
depends on ARCH_IMX
|
|
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
|
|
index 3877c87..e80ea72 100644
|
|
--- a/drivers/mmc/host/Makefile
|
|
+++ b/drivers/mmc/host/Makefile
|
|
@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
|
|
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
|
|
obj-$(CONFIG_MMC_OMAP) += omap.o
|
|
obj-$(CONFIG_MMC_AT91) += at91_mci.o
|
|
+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
|
|
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
|
|
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
|
|
|
|
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
|
|
new file mode 100644
|
|
index 0000000..0b5ec58
|
|
--- /dev/null
|
|
+++ b/drivers/mmc/host/atmel-mci.c
|
|
@@ -0,0 +1,1176 @@
|
|
+/*
|
|
+ * Atmel MultiMedia Card Interface driver
|
|
+ *
|
|
+ * Copyright (C) 2004-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/blkdev.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <linux/mmc/host.h>
|
|
+
|
|
+#include <asm/dma-controller.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+#include "atmel-mci.h"
|
|
+
|
|
+#define DRIVER_NAME "atmel_mci"
|
|
+
|
|
+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
|
|
+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
|
|
+
|
|
+enum {
|
|
+ EVENT_CMD_COMPLETE = 0,
|
|
+ EVENT_DATA_COMPLETE,
|
|
+ EVENT_DATA_ERROR,
|
|
+ EVENT_STOP_SENT,
|
|
+ EVENT_STOP_COMPLETE,
|
|
+ EVENT_DMA_COMPLETE,
|
|
+ EVENT_DMA_ERROR,
|
|
+ EVENT_CARD_DETECT,
|
|
+};
|
|
+
|
|
+struct atmel_mci_dma {
|
|
+ struct dma_request_sg req;
|
|
+ unsigned short rx_periph_id;
|
|
+ unsigned short tx_periph_id;
|
|
+};
|
|
+
|
|
+struct atmel_mci {
|
|
+ struct mmc_host *mmc;
|
|
+ void __iomem *regs;
|
|
+ struct atmel_mci_dma dma;
|
|
+
|
|
+ struct mmc_request *mrq;
|
|
+ struct mmc_command *cmd;
|
|
+ struct mmc_data *data;
|
|
+
|
|
+ u32 cmd_status;
|
|
+ u32 data_status;
|
|
+ u32 stop_status;
|
|
+ u32 stop_cmdr;
|
|
+
|
|
+ struct tasklet_struct tasklet;
|
|
+ unsigned long pending_events;
|
|
+ unsigned long completed_events;
|
|
+
|
|
+ int present;
|
|
+ int detect_pin;
|
|
+ int wp_pin;
|
|
+
|
|
+ unsigned long bus_hz;
|
|
+ unsigned long mapbase;
|
|
+ struct clk *mck;
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+#ifdef CONFIG_DEBUG_FS
|
|
+ struct dentry *debugfs_root;
|
|
+ struct dentry *debugfs_regs;
|
|
+ struct dentry *debugfs_req;
|
|
+ struct dentry *debugfs_pending_events;
|
|
+ struct dentry *debugfs_completed_events;
|
|
+#endif
|
|
+};
|
|
+
|
|
+/* Those printks take an awful lot of time... */
|
|
+#ifndef DEBUG
|
|
+static unsigned int fmax = 15000000U;
|
|
+#else
|
|
+static unsigned int fmax = 1000000U;
|
|
+#endif
|
|
+module_param(fmax, uint, 0444);
|
|
+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
|
|
+
|
|
+/* Test bit macros for completed events */
|
|
+#define mci_cmd_is_complete(host) \
|
|
+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
|
|
+#define mci_data_is_complete(host) \
|
|
+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
|
|
+#define mci_data_error_is_complete(host) \
|
|
+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
|
|
+#define mci_stop_sent_is_complete(host) \
|
|
+ test_bit(EVENT_STOP_SENT, &host->completed_events)
|
|
+#define mci_stop_is_complete(host) \
|
|
+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
|
|
+#define mci_dma_is_complete(host) \
|
|
+ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
|
|
+#define mci_dma_error_is_complete(host) \
|
|
+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
|
|
+#define mci_card_detect_is_complete(host) \
|
|
+ test_bit(EVENT_CARD_DETECT, &host->completed_events)
|
|
+
|
|
+/* Test and clear bit macros for pending events */
|
|
+#define mci_clear_cmd_is_pending(host) \
|
|
+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
|
|
+#define mci_clear_data_is_pending(host) \
|
|
+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
|
|
+#define mci_clear_data_error_is_pending(host) \
|
|
+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
|
|
+#define mci_clear_stop_sent_is_pending(host) \
|
|
+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
|
|
+#define mci_clear_stop_is_pending(host) \
|
|
+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
|
|
+#define mci_clear_dma_error_is_pending(host) \
|
|
+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
|
|
+#define mci_clear_card_detect_is_pending(host) \
|
|
+ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
|
|
+
|
|
+/* Test and set bit macros for completed events */
|
|
+#define mci_set_cmd_is_completed(host) \
|
|
+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
|
|
+#define mci_set_data_is_completed(host) \
|
|
+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
|
|
+#define mci_set_data_error_is_completed(host) \
|
|
+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
|
|
+#define mci_set_stop_sent_is_completed(host) \
|
|
+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
|
|
+#define mci_set_stop_is_completed(host) \
|
|
+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
|
|
+#define mci_set_dma_error_is_completed(host) \
|
|
+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
|
|
+#define mci_set_card_detect_is_completed(host) \
|
|
+ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
|
|
+
|
|
+/* Set bit macros for completed events */
|
|
+#define mci_set_cmd_complete(host) \
|
|
+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
|
|
+#define mci_set_data_complete(host) \
|
|
+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
|
|
+#define mci_set_data_error_complete(host) \
|
|
+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
|
|
+#define mci_set_stop_sent_complete(host) \
|
|
+ set_bit(EVENT_STOP_SENT, &host->completed_events)
|
|
+#define mci_set_stop_complete(host) \
|
|
+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
|
|
+#define mci_set_dma_complete(host) \
|
|
+ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
|
|
+#define mci_set_dma_error_complete(host) \
|
|
+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
|
|
+#define mci_set_card_detect_complete(host) \
|
|
+ set_bit(EVENT_CARD_DETECT, &host->completed_events)
|
|
+
|
|
+/* Set bit macros for pending events */
|
|
+#define mci_set_cmd_pending(host) \
|
|
+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
|
|
+#define mci_set_data_pending(host) \
|
|
+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
|
|
+#define mci_set_data_error_pending(host) \
|
|
+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
|
|
+#define mci_set_stop_sent_pending(host) \
|
|
+ set_bit(EVENT_STOP_SENT, &host->pending_events)
|
|
+#define mci_set_stop_pending(host) \
|
|
+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
|
|
+#define mci_set_dma_error_pending(host) \
|
|
+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
|
|
+#define mci_set_card_detect_pending(host) \
|
|
+ set_bit(EVENT_CARD_DETECT, &host->pending_events)
|
|
+
|
|
+/* Clear bit macros for pending events */
|
|
+#define mci_clear_cmd_pending(host) \
|
|
+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
|
|
+#define mci_clear_data_pending(host) \
|
|
+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
|
|
+#define mci_clear_data_error_pending(host) \
|
|
+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
|
|
+#define mci_clear_stop_sent_pending(host) \
|
|
+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
|
|
+#define mci_clear_stop_pending(host) \
|
|
+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
|
|
+#define mci_clear_dma_error_pending(host) \
|
|
+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
|
|
+#define mci_clear_card_detect_pending(host) \
|
|
+ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
|
|
+
|
|
+
|
|
+#ifdef CONFIG_DEBUG_FS
|
|
+#include <linux/debugfs.h>
|
|
+
|
|
+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
|
|
+
|
|
+struct req_dbg_data {
|
|
+ unsigned int nbytes;
|
|
+ char str[DBG_REQ_BUF_SIZE];
|
|
+};
|
|
+
|
|
+static int req_dbg_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ struct atmel_mci *host;
|
|
+ struct mmc_request *mrq;
|
|
+ struct mmc_command *cmd, *stop;
|
|
+ struct mmc_data *data;
|
|
+ struct req_dbg_data *priv;
|
|
+ char *str;
|
|
+ unsigned long n = 0;
|
|
+
|
|
+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
|
|
+ if (!priv)
|
|
+ return -ENOMEM;
|
|
+ str = priv->str;
|
|
+
|
|
+ mutex_lock(&inode->i_mutex);
|
|
+ host = inode->i_private;
|
|
+
|
|
+ spin_lock_irq(&host->mmc->lock);
|
|
+ mrq = host->mrq;
|
|
+ if (mrq) {
|
|
+ cmd = mrq->cmd;
|
|
+ data = mrq->data;
|
|
+ stop = mrq->stop;
|
|
+ n = snprintf(str, DBG_REQ_BUF_SIZE,
|
|
+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
|
|
+ cmd->opcode, cmd->arg, cmd->flags,
|
|
+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
|
|
+ cmd->resp[3], cmd->error);
|
|
+ if (n < DBG_REQ_BUF_SIZE && data)
|
|
+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
|
|
+ "DATA %u * %u (%u) %x (err %u)\n",
|
|
+ data->blocks, data->blksz,
|
|
+ data->bytes_xfered, data->flags,
|
|
+ data->error);
|
|
+ if (n < DBG_REQ_BUF_SIZE && stop)
|
|
+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
|
|
+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
|
|
+ stop->opcode, stop->arg, stop->flags,
|
|
+ stop->resp[0], stop->resp[1],
|
|
+ stop->resp[2], stop->resp[3],
|
|
+ stop->error);
|
|
+ }
|
|
+ spin_unlock_irq(&host->mmc->lock);
|
|
+ mutex_unlock(&inode->i_mutex);
|
|
+
|
|
+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
|
|
+ file->private_data = priv;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static ssize_t req_dbg_read(struct file *file, char __user *buf,
|
|
+ size_t nbytes, loff_t *ppos)
|
|
+{
|
|
+ struct req_dbg_data *priv = file->private_data;
|
|
+
|
|
+ return simple_read_from_buffer(buf, nbytes, ppos,
|
|
+ priv->str, priv->nbytes);
|
|
+}
|
|
+
|
|
+static int req_dbg_release(struct inode *inode, struct file *file)
|
|
+{
|
|
+ kfree(file->private_data);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct file_operations req_dbg_fops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .open = req_dbg_open,
|
|
+ .llseek = no_llseek,
|
|
+ .read = req_dbg_read,
|
|
+ .release = req_dbg_release,
|
|
+};
|
|
+
|
|
+static int regs_dbg_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ struct atmel_mci *host;
|
|
+ unsigned int i;
|
|
+ u32 *data;
|
|
+ int ret = -ENOMEM;
|
|
+
|
|
+ mutex_lock(&inode->i_mutex);
|
|
+ host = inode->i_private;
|
|
+ data = kmalloc(inode->i_size, GFP_KERNEL);
|
|
+ if (!data)
|
|
+ goto out;
|
|
+
|
|
+ spin_lock_irq(&host->mmc->lock);
|
|
+ for (i = 0; i < inode->i_size / 4; i++)
|
|
+ data[i] = __raw_readl(host->regs + i * 4);
|
|
+ spin_unlock_irq(&host->mmc->lock);
|
|
+
|
|
+ file->private_data = data;
|
|
+ ret = 0;
|
|
+
|
|
+out:
|
|
+ mutex_unlock(&inode->i_mutex);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
|
|
+ size_t nbytes, loff_t *ppos)
|
|
+{
|
|
+ struct inode *inode = file->f_dentry->d_inode;
|
|
+ int ret;
|
|
+
|
|
+ mutex_lock(&inode->i_mutex);
|
|
+ ret = simple_read_from_buffer(buf, nbytes, ppos,
|
|
+ file->private_data,
|
|
+ file->f_dentry->d_inode->i_size);
|
|
+ mutex_unlock(&inode->i_mutex);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int regs_dbg_release(struct inode *inode, struct file *file)
|
|
+{
|
|
+ kfree(file->private_data);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct file_operations regs_dbg_fops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .open = regs_dbg_open,
|
|
+ .llseek = generic_file_llseek,
|
|
+ .read = regs_dbg_read,
|
|
+ .release = regs_dbg_release,
|
|
+};
|
|
+
|
|
+static void atmci_init_debugfs(struct atmel_mci *host)
|
|
+{
|
|
+ struct mmc_host *mmc;
|
|
+ struct dentry *root, *regs;
|
|
+ struct resource *res;
|
|
+
|
|
+ mmc = host->mmc;
|
|
+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
|
|
+ if (IS_ERR(root) || !root)
|
|
+ goto err_root;
|
|
+ host->debugfs_root = root;
|
|
+
|
|
+ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
|
|
+ if (!regs)
|
|
+ goto err_regs;
|
|
+
|
|
+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
|
|
+ regs->d_inode->i_size = res->end - res->start + 1;
|
|
+ host->debugfs_regs = regs;
|
|
+
|
|
+ host->debugfs_req = debugfs_create_file("req", 0400, root,
|
|
+ host, &req_dbg_fops);
|
|
+ if (!host->debugfs_req)
|
|
+ goto err_req;
|
|
+
|
|
+ host->debugfs_pending_events
|
|
+ = debugfs_create_u32("pending_events", 0400, root,
|
|
+ (u32 *)&host->pending_events);
|
|
+ if (!host->debugfs_pending_events)
|
|
+ goto err_pending_events;
|
|
+
|
|
+ host->debugfs_completed_events
|
|
+ = debugfs_create_u32("completed_events", 0400, root,
|
|
+ (u32 *)&host->completed_events);
|
|
+ if (!host->debugfs_completed_events)
|
|
+ goto err_completed_events;
|
|
+
|
|
+ return;
|
|
+
|
|
+err_completed_events:
|
|
+ debugfs_remove(host->debugfs_pending_events);
|
|
+err_pending_events:
|
|
+ debugfs_remove(host->debugfs_req);
|
|
+err_req:
|
|
+ debugfs_remove(host->debugfs_regs);
|
|
+err_regs:
|
|
+ debugfs_remove(host->debugfs_root);
|
|
+err_root:
|
|
+ host->debugfs_root = NULL;
|
|
+ dev_err(&host->pdev->dev,
|
|
+ "failed to initialize debugfs for %s\n",
|
|
+ mmc_hostname(mmc));
|
|
+}
|
|
+
|
|
+static void atmci_cleanup_debugfs(struct atmel_mci *host)
|
|
+{
|
|
+ if (host->debugfs_root) {
|
|
+ debugfs_remove(host->debugfs_completed_events);
|
|
+ debugfs_remove(host->debugfs_pending_events);
|
|
+ debugfs_remove(host->debugfs_req);
|
|
+ debugfs_remove(host->debugfs_regs);
|
|
+ debugfs_remove(host->debugfs_root);
|
|
+ host->debugfs_root = NULL;
|
|
+ }
|
|
+}
|
|
+#else
|
|
+static inline void atmci_init_debugfs(struct atmel_mci *host)
|
|
+{
|
|
+
|
|
+}
|
|
+
|
|
+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
|
|
+{
|
|
+
|
|
+}
|
|
+#endif /* CONFIG_DEBUG_FS */
|
|
+
|
|
+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
|
|
+ unsigned int ns)
|
|
+{
|
|
+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
|
|
+}
|
|
+
|
|
+static void atmci_set_timeout(struct atmel_mci *host,
|
|
+ struct mmc_data *data)
|
|
+{
|
|
+ static unsigned dtomul_to_shift[] = {
|
|
+ 0, 4, 7, 8, 10, 12, 16, 20
|
|
+ };
|
|
+ unsigned timeout;
|
|
+ unsigned dtocyc, dtomul;
|
|
+
|
|
+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
|
|
+
|
|
+ for (dtomul = 0; dtomul < 8; dtomul++) {
|
|
+ unsigned shift = dtomul_to_shift[dtomul];
|
|
+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
|
|
+ if (dtocyc < 15)
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (dtomul >= 8) {
|
|
+ dtomul = 7;
|
|
+ dtocyc = 15;
|
|
+ }
|
|
+
|
|
+ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
|
|
+ dtocyc << dtomul_to_shift[dtomul]);
|
|
+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
|
|
+ | MCI_BF(DTOCYC, dtocyc)));
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Return mask with command flags to be enabled for this command.
|
|
+ */
|
|
+static u32 atmci_prepare_command(struct mmc_host *mmc,
|
|
+ struct mmc_command *cmd)
|
|
+{
|
|
+ u32 cmdr;
|
|
+
|
|
+ cmd->error = 0;
|
|
+
|
|
+ cmdr = MCI_BF(CMDNB, cmd->opcode);
|
|
+
|
|
+ if (cmd->flags & MMC_RSP_PRESENT) {
|
|
+ if (cmd->flags & MMC_RSP_136)
|
|
+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
|
|
+ else
|
|
+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
|
|
+ * it's too difficult to determine whether this is an ACMD or
|
|
+ * not. Better make it 64.
|
|
+ */
|
|
+ cmdr |= MCI_BIT(MAXLAT);
|
|
+
|
|
+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
+ cmdr |= MCI_BIT(OPDCMD);
|
|
+
|
|
+ dev_dbg(&mmc->class_dev,
|
|
+ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
|
|
+ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
|
|
+
|
|
+ return cmdr;
|
|
+}
|
|
+
|
|
+static void atmci_start_command(struct atmel_mci *host,
|
|
+ struct mmc_command *cmd,
|
|
+ u32 cmd_flags)
|
|
+{
|
|
+ WARN_ON(host->cmd);
|
|
+ host->cmd = cmd;
|
|
+
|
|
+ mci_writel(host, ARGR, cmd->arg);
|
|
+ mci_writel(host, CMDR, cmd_flags);
|
|
+
|
|
+ if (cmd->data)
|
|
+ dma_start_request(host->dma.req.req.dmac,
|
|
+ host->dma.req.req.channel);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Returns a mask of flags to be set in the command register when the
|
|
+ * command to start the transfer is to be sent.
|
|
+ */
|
|
+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
|
|
+{
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+ u32 cmd_flags;
|
|
+
|
|
+ WARN_ON(host->data);
|
|
+ host->data = data;
|
|
+
|
|
+ atmci_set_timeout(host, data);
|
|
+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
|
|
+ | MCI_BF(BLKLEN, data->blksz)));
|
|
+ host->dma.req.block_size = data->blksz;
|
|
+ host->dma.req.nr_blocks = data->blocks;
|
|
+
|
|
+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
|
|
+ if (data->flags & MMC_DATA_STREAM)
|
|
+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
|
|
+ else if (data->blocks > 1)
|
|
+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
|
|
+ else
|
|
+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
|
|
+
|
|
+ if (data->flags & MMC_DATA_READ) {
|
|
+ cmd_flags |= MCI_BIT(TRDIR);
|
|
+ host->dma.req.nr_sg
|
|
+ = dma_map_sg(&host->pdev->dev, data->sg,
|
|
+ data->sg_len, DMA_FROM_DEVICE);
|
|
+ host->dma.req.periph_id = host->dma.rx_periph_id;
|
|
+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
|
|
+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
|
|
+ } else {
|
|
+ host->dma.req.nr_sg
|
|
+ = dma_map_sg(&host->pdev->dev, data->sg,
|
|
+ data->sg_len, DMA_TO_DEVICE);
|
|
+ host->dma.req.periph_id = host->dma.tx_periph_id;
|
|
+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
|
|
+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
|
|
+ }
|
|
+ host->dma.req.sg = data->sg;
|
|
+
|
|
+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
|
|
+
|
|
+ return cmd_flags;
|
|
+}
|
|
+
|
|
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
+{
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+ struct mmc_data *data = mrq->data;
|
|
+ u32 iflags;
|
|
+ u32 cmdflags = 0;
|
|
+
|
|
+ iflags = mci_readl(host, IMR);
|
|
+ if (iflags)
|
|
+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
|
|
+ mci_readl(host, IMR));
|
|
+
|
|
+ WARN_ON(host->mrq != NULL);
|
|
+ host->mrq = mrq;
|
|
+ host->pending_events = 0;
|
|
+ host->completed_events = 0;
|
|
+
|
|
+ iflags = MCI_BIT(CMDRDY);
|
|
+ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
|
|
+
|
|
+ if (mrq->stop) {
|
|
+ WARN_ON(!data);
|
|
+
|
|
+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
|
|
+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
|
|
+ if (!(data->flags & MMC_DATA_WRITE))
|
|
+ host->stop_cmdr |= MCI_BIT(TRDIR);
|
|
+ if (data->flags & MMC_DATA_STREAM)
|
|
+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
|
|
+ else
|
|
+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
|
|
+ }
|
|
+ if (data) {
|
|
+ cmdflags |= atmci_prepare_data(mmc, data);
|
|
+ iflags |= MCI_DATA_ERROR_FLAGS;
|
|
+ }
|
|
+
|
|
+ atmci_start_command(host, mrq->cmd, cmdflags);
|
|
+ mci_writel(host, IER, iflags);
|
|
+}
|
|
+
|
|
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
+{
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+ u32 mr;
|
|
+
|
|
+ if (ios->clock) {
|
|
+ u32 clkdiv;
|
|
+
|
|
+ /* Set clock rate */
|
|
+ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
|
|
+ if (clkdiv > 255) {
|
|
+ dev_warn(&mmc->class_dev,
|
|
+ "clock %u too slow; using %lu\n",
|
|
+ ios->clock, host->bus_hz / (2 * 256));
|
|
+ clkdiv = 255;
|
|
+ }
|
|
+
|
|
+ mr = mci_readl(host, MR);
|
|
+ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
|
|
+ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
|
|
+ mci_writel(host, MR, mr);
|
|
+
|
|
+ /* Enable the MCI controller */
|
|
+ mci_writel(host, CR, MCI_BIT(MCIEN));
|
|
+ } else {
|
|
+ /* Disable the MCI controller */
|
|
+ mci_writel(host, CR, MCI_BIT(MCIDIS));
|
|
+ }
|
|
+
|
|
+ switch (ios->bus_width) {
|
|
+ case MMC_BUS_WIDTH_1:
|
|
+ mci_writel(host, SDCR, 0);
|
|
+ break;
|
|
+ case MMC_BUS_WIDTH_4:
|
|
+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ switch (ios->power_mode) {
|
|
+ case MMC_POWER_ON:
|
|
+ /* Send init sequence (74 clock cycles) */
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
+ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
|
|
+ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
|
|
+ cpu_relax();
|
|
+ break;
|
|
+ default:
|
|
+ /*
|
|
+ * TODO: None of the currently available AVR32-based
|
|
+ * boards allow MMC power to be turned off. Implement
|
|
+ * power control when this can be tested properly.
|
|
+ */
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int atmci_get_ro(struct mmc_host *mmc)
|
|
+{
|
|
+ int read_only = 0;
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+
|
|
+ if (host->wp_pin >= 0) {
|
|
+ read_only = gpio_get_value(host->wp_pin);
|
|
+ dev_dbg(&mmc->class_dev, "card is %s\n",
|
|
+ read_only ? "read-only" : "read-write");
|
|
+ } else {
|
|
+ dev_dbg(&mmc->class_dev,
|
|
+ "no pin for checking read-only switch."
|
|
+ " Assuming write-enable.\n");
|
|
+ }
|
|
+
|
|
+ return read_only;
|
|
+}
|
|
+
|
|
+static struct mmc_host_ops atmci_ops = {
|
|
+ .request = atmci_request,
|
|
+ .set_ios = atmci_set_ios,
|
|
+ .get_ro = atmci_get_ro,
|
|
+};
|
|
+
|
|
+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
+{
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+
|
|
+ WARN_ON(host->cmd || host->data);
|
|
+ host->mrq = NULL;
|
|
+
|
|
+ mmc_request_done(mmc, mrq);
|
|
+}
|
|
+
|
|
+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
|
|
+ u32 flags)
|
|
+{
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+
|
|
+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
|
|
+ mci_writel(host, IER, MCI_BIT(CMDRDY));
|
|
+}
|
|
+
|
|
+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
|
|
+{
|
|
+ host->data = NULL;
|
|
+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
|
|
+ ((data->flags & MMC_DATA_WRITE)
|
|
+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
|
|
+
|
|
+ /*
|
|
+ * Data might complete before command for very short transfers
|
|
+ * (like READ_SCR)
|
|
+ */
|
|
+ if (mci_cmd_is_complete(host)
|
|
+ && (!data->stop || mci_stop_is_complete(host)))
|
|
+ atmci_request_end(host->mmc, data->mrq);
|
|
+}
|
|
+
|
|
+static void atmci_command_complete(struct atmel_mci *host,
|
|
+ struct mmc_command *cmd, u32 status)
|
|
+{
|
|
+ if (status & MCI_BIT(RTOE))
|
|
+ cmd->error = -ETIMEDOUT;
|
|
+ else if ((cmd->flags & MMC_RSP_CRC)
|
|
+ && (status & MCI_BIT(RCRCE)))
|
|
+ cmd->error = -EILSEQ;
|
|
+ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
|
|
+ cmd->error = -EIO;
|
|
+
|
|
+ if (cmd->error) {
|
|
+ dev_dbg(&host->mmc->class_dev,
|
|
+ "command error: op=0x%x status=0x%08x\n",
|
|
+ cmd->opcode, status);
|
|
+
|
|
+ if (cmd->data) {
|
|
+ dma_stop_request(host->dma.req.req.dmac,
|
|
+ host->dma.req.req.channel);
|
|
+ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
|
|
+ | MCI_DATA_ERROR_FLAGS);
|
|
+ host->data = NULL;
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+static void atmci_tasklet_func(unsigned long priv)
|
|
+{
|
|
+ struct mmc_host *mmc = (struct mmc_host *)priv;
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+ struct mmc_request *mrq = host->mrq;
|
|
+ struct mmc_data *data = host->data;
|
|
+
|
|
+ dev_vdbg(&mmc->class_dev,
|
|
+ "tasklet: pending/completed/mask %lx/%lx/%x\n",
|
|
+ host->pending_events, host->completed_events,
|
|
+ mci_readl(host, IMR));
|
|
+
|
|
+ if (mci_clear_cmd_is_pending(host)) {
|
|
+ mci_set_cmd_complete(host);
|
|
+ atmci_command_complete(host, mrq->cmd, host->cmd_status);
|
|
+ if (!host->data || mci_data_is_complete(host)
|
|
+ || mci_data_error_is_complete(host))
|
|
+ atmci_request_end(mmc, mrq);
|
|
+ }
|
|
+ if (mci_clear_stop_is_pending(host)) {
|
|
+ mci_set_stop_complete(host);
|
|
+ atmci_command_complete(host, mrq->stop, host->stop_status);
|
|
+ if (mci_data_is_complete(host)
|
|
+ || mci_data_error_is_complete(host))
|
|
+ atmci_request_end(mmc, mrq);
|
|
+ }
|
|
+ if (mci_clear_dma_error_is_pending(host)) {
|
|
+ mci_set_dma_error_complete(host);
|
|
+ mci_clear_data_pending(host);
|
|
+
|
|
+ /* DMA controller got bus error => invalid address */
|
|
+ data->error = -EIO;
|
|
+
|
|
+ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
|
|
+ host->data->bytes_xfered);
|
|
+
|
|
+ if (data->stop
|
|
+ && !mci_set_stop_sent_is_completed(host))
|
|
+ /* TODO: Check if card is still present */
|
|
+ send_stop_cmd(host->mmc, data, 0);
|
|
+
|
|
+ atmci_data_complete(host, data);
|
|
+ }
|
|
+ if (mci_clear_data_error_is_pending(host)) {
|
|
+ u32 status = host->data_status;
|
|
+
|
|
+ mci_set_data_error_complete(host);
|
|
+ mci_clear_data_pending(host);
|
|
+
|
|
+ dma_stop_request(host->dma.req.req.dmac,
|
|
+ host->dma.req.req.channel);
|
|
+
|
|
+ if (status & MCI_BIT(DCRCE)) {
|
|
+ dev_dbg(&mmc->class_dev, "data CRC error\n");
|
|
+ data->error = -EILSEQ;
|
|
+ } else if (status & MCI_BIT(DTOE)) {
|
|
+ dev_dbg(&mmc->class_dev, "data timeout error\n");
|
|
+ data->error = -ETIMEDOUT;
|
|
+ } else {
|
|
+ dev_dbg(&mmc->class_dev, "data FIFO error\n");
|
|
+ data->error = -EIO;
|
|
+ }
|
|
+ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
|
|
+ data->bytes_xfered);
|
|
+
|
|
+ if (data->stop
|
|
+ && !mci_set_stop_sent_is_completed(host))
|
|
+ /* TODO: Check if card is still present */
|
|
+ send_stop_cmd(host->mmc, data, 0);
|
|
+
|
|
+ atmci_data_complete(host, data);
|
|
+ }
|
|
+ if (mci_clear_data_is_pending(host)) {
|
|
+ mci_set_data_complete(host);
|
|
+ data->bytes_xfered = data->blocks * data->blksz;
|
|
+ atmci_data_complete(host, data);
|
|
+ }
|
|
+ if (mci_clear_card_detect_is_pending(host)) {
|
|
+ /* Reset controller if card is gone */
|
|
+ if (!host->present) {
|
|
+ mci_writel(host, CR, MCI_BIT(SWRST));
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
+ mci_writel(host, CR, MCI_BIT(MCIEN));
|
|
+ }
|
|
+
|
|
+ /* Clean up queue if present */
|
|
+ if (mrq) {
|
|
+ if (!mci_cmd_is_complete(host))
|
|
+ mrq->cmd->error = -ETIMEDOUT;
|
|
+ if (mrq->data && !mci_data_is_complete(host)
|
|
+ && !mci_data_error_is_complete(host)) {
|
|
+ dma_stop_request(host->dma.req.req.dmac,
|
|
+ host->dma.req.req.channel);
|
|
+ host->data->error = -ETIMEDOUT;
|
|
+ atmci_data_complete(host, data);
|
|
+ }
|
|
+ if (mrq->stop && !mci_stop_is_complete(host))
|
|
+ mrq->stop->error = -ETIMEDOUT;
|
|
+
|
|
+ host->cmd = NULL;
|
|
+ atmci_request_end(mmc, mrq);
|
|
+ }
|
|
+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
|
|
+ }
|
|
+}
|
|
+
|
|
+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
|
|
+{
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+ struct mmc_command *cmd = host->cmd;
|
|
+
|
|
+ /*
|
|
+ * Read the response now so that we're free to send a new
|
|
+ * command immediately.
|
|
+ */
|
|
+ cmd->resp[0] = mci_readl(host, RSPR);
|
|
+ cmd->resp[1] = mci_readl(host, RSPR);
|
|
+ cmd->resp[2] = mci_readl(host, RSPR);
|
|
+ cmd->resp[3] = mci_readl(host, RSPR);
|
|
+
|
|
+ mci_writel(host, IDR, MCI_BIT(CMDRDY));
|
|
+ host->cmd = NULL;
|
|
+
|
|
+ if (mci_stop_sent_is_complete(host)) {
|
|
+ host->stop_status = status;
|
|
+ mci_set_stop_pending(host);
|
|
+ } else {
|
|
+ if (host->mrq->stop && mci_dma_is_complete(host)
|
|
+ && !mci_set_stop_sent_is_completed(host))
|
|
+ send_stop_cmd(host->mmc, host->data, 0);
|
|
+ host->cmd_status = status;
|
|
+ mci_set_cmd_pending(host);
|
|
+ }
|
|
+
|
|
+ tasklet_schedule(&host->tasklet);
|
|
+}
|
|
+
|
|
+static void atmci_xfer_complete(struct dma_request *_req)
|
|
+{
|
|
+ struct dma_request_sg *req = to_dma_request_sg(_req);
|
|
+ struct atmel_mci_dma *dma;
|
|
+ struct atmel_mci *host;
|
|
+ struct mmc_data *data;
|
|
+
|
|
+ dma = container_of(req, struct atmel_mci_dma, req);
|
|
+ host = container_of(dma, struct atmel_mci, dma);
|
|
+ data = host->data;
|
|
+
|
|
+ /*
|
|
+ * This callback may be called before we see the CMDRDY
|
|
+ * interrupt under heavy irq load (possibly caused by other
|
|
+ * drivers) or when interrupts are disabled for a long time.
|
|
+ */
|
|
+ mci_set_dma_complete(host);
|
|
+ if (data->stop && mci_cmd_is_complete(host)
|
|
+ && !mci_set_stop_sent_is_completed(host))
|
|
+ send_stop_cmd(host->mmc, data, 0);
|
|
+
|
|
+ /*
|
|
+ * Regardless of what the documentation says, we have to wait
|
|
+ * for NOTBUSY even after block read operations.
|
|
+ *
|
|
+ * When the DMA transfer is complete, the controller may still
|
|
+ * be reading the CRC from the card, i.e. the data transfer is
|
|
+ * still in progress and we haven't seen all the potential
|
|
+ * error bits yet.
|
|
+ */
|
|
+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
|
|
+}
|
|
+
|
|
+static void atmci_dma_error(struct dma_request *_req)
|
|
+{
|
|
+ struct dma_request_sg *req = to_dma_request_sg(_req);
|
|
+ struct atmel_mci_dma *dma;
|
|
+ struct atmel_mci *host;
|
|
+
|
|
+ dma = container_of(req, struct atmel_mci_dma, req);
|
|
+ host = container_of(dma, struct atmel_mci, dma);
|
|
+
|
|
+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
|
|
+ | MCI_DATA_ERROR_FLAGS));
|
|
+
|
|
+ mci_set_dma_error_pending(host);
|
|
+ tasklet_schedule(&host->tasklet);
|
|
+}
|
|
+
|
|
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct mmc_host *mmc = dev_id;
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+ u32 status, mask, pending;
|
|
+
|
|
+ spin_lock(&mmc->lock);
|
|
+
|
|
+ status = mci_readl(host, SR);
|
|
+ mask = mci_readl(host, IMR);
|
|
+ pending = status & mask;
|
|
+
|
|
+ do {
|
|
+ if (pending & MCI_DATA_ERROR_FLAGS) {
|
|
+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
|
|
+ | MCI_DATA_ERROR_FLAGS));
|
|
+ host->data_status = status;
|
|
+ mci_set_data_error_pending(host);
|
|
+ tasklet_schedule(&host->tasklet);
|
|
+ break;
|
|
+ }
|
|
+ if (pending & MCI_BIT(CMDRDY))
|
|
+ atmci_cmd_interrupt(mmc, status);
|
|
+ if (pending & MCI_BIT(NOTBUSY)) {
|
|
+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
|
|
+ | MCI_DATA_ERROR_FLAGS));
|
|
+ mci_set_data_pending(host);
|
|
+ tasklet_schedule(&host->tasklet);
|
|
+ }
|
|
+
|
|
+ status = mci_readl(host, SR);
|
|
+ mask = mci_readl(host, IMR);
|
|
+ pending = status & mask;
|
|
+ } while (pending);
|
|
+
|
|
+ spin_unlock(&mmc->lock);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
|
|
+{
|
|
+ struct mmc_host *mmc = dev_id;
|
|
+ struct atmel_mci *host = mmc_priv(mmc);
|
|
+
|
|
+ int present = !gpio_get_value(irq_to_gpio(irq));
|
|
+
|
|
+ if (present != host->present) {
|
|
+ dev_dbg(&mmc->class_dev, "card %s\n",
|
|
+ present ? "inserted" : "removed");
|
|
+ host->present = present;
|
|
+ mci_set_card_detect_pending(host);
|
|
+ tasklet_schedule(&host->tasklet);
|
|
+ }
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int __devinit atmci_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct mci_platform_data *board;
|
|
+ struct atmel_mci *host;
|
|
+ struct mmc_host *mmc;
|
|
+ struct resource *regs;
|
|
+ int irq;
|
|
+ int ret;
|
|
+
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!regs)
|
|
+ return -ENXIO;
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
+ if (irq < 0)
|
|
+ return irq;
|
|
+
|
|
+ board = pdev->dev.platform_data;
|
|
+
|
|
+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
|
|
+ if (!mmc)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ host = mmc_priv(mmc);
|
|
+ host->pdev = pdev;
|
|
+ host->mmc = mmc;
|
|
+ if (board) {
|
|
+ host->detect_pin = board->detect_pin;
|
|
+ host->wp_pin = board->wp_pin;
|
|
+ } else {
|
|
+ host->detect_pin = -1;
|
|
+ host->detect_pin = -1;
|
|
+ }
|
|
+
|
|
+ host->mck = clk_get(&pdev->dev, "mci_clk");
|
|
+ if (IS_ERR(host->mck)) {
|
|
+ ret = PTR_ERR(host->mck);
|
|
+ goto out_free_host;
|
|
+ }
|
|
+ clk_enable(host->mck);
|
|
+
|
|
+ ret = -ENOMEM;
|
|
+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
+ if (!host->regs)
|
|
+ goto out_disable_clk;
|
|
+
|
|
+ host->bus_hz = clk_get_rate(host->mck);
|
|
+ host->mapbase = regs->start;
|
|
+
|
|
+ mmc->ops = &atmci_ops;
|
|
+ mmc->f_min = (host->bus_hz + 511) / 512;
|
|
+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
|
|
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
+
|
|
+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
|
|
+
|
|
+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
|
|
+ if (ret)
|
|
+ goto out_unmap;
|
|
+
|
|
+ /* Assume card is present if we don't have a detect pin */
|
|
+ host->present = 1;
|
|
+ if (host->detect_pin >= 0) {
|
|
+ if (gpio_request(host->detect_pin, "mmc_detect")) {
|
|
+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
|
|
+ host->detect_pin = -1;
|
|
+ } else {
|
|
+ host->present = !gpio_get_value(host->detect_pin);
|
|
+ }
|
|
+ }
|
|
+ if (host->wp_pin >= 0) {
|
|
+ if (gpio_request(host->wp_pin, "mmc_wp")) {
|
|
+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
|
|
+ host->wp_pin = -1;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* TODO: Get this information from platform data */
|
|
+ ret = -ENOMEM;
|
|
+ host->dma.req.req.dmac = find_dma_controller(0);
|
|
+ if (!host->dma.req.req.dmac) {
|
|
+ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
|
|
+ goto out_free_irq;
|
|
+ }
|
|
+ ret = dma_alloc_channel(host->dma.req.req.dmac);
|
|
+ if (ret < 0) {
|
|
+ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
|
|
+ goto out_free_irq;
|
|
+ }
|
|
+ host->dma.req.req.channel = ret;
|
|
+ host->dma.req.width = DMA_WIDTH_32BIT;
|
|
+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
|
|
+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
|
|
+ host->dma.req.req.error = atmci_dma_error;
|
|
+ host->dma.rx_periph_id = 0;
|
|
+ host->dma.tx_periph_id = 1;
|
|
+
|
|
+ mci_writel(host, CR, MCI_BIT(SWRST));
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
+
|
|
+ platform_set_drvdata(pdev, host);
|
|
+
|
|
+ mmc_add_host(mmc);
|
|
+
|
|
+ if (host->detect_pin >= 0) {
|
|
+ ret = request_irq(gpio_to_irq(host->detect_pin),
|
|
+ atmci_detect_change,
|
|
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
+ DRIVER_NAME, mmc);
|
|
+ if (ret) {
|
|
+ dev_dbg(&mmc->class_dev,
|
|
+ "could not request IRQ %d for detect pin\n",
|
|
+ gpio_to_irq(host->detect_pin));
|
|
+ gpio_free(host->detect_pin);
|
|
+ host->detect_pin = -1;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
|
|
+ host->mapbase, irq);
|
|
+
|
|
+ atmci_init_debugfs(host);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_free_irq:
|
|
+ if (host->detect_pin >= 0)
|
|
+ gpio_free(host->detect_pin);
|
|
+ if (host->wp_pin >= 0)
|
|
+ gpio_free(host->wp_pin);
|
|
+ free_irq(irq, mmc);
|
|
+out_unmap:
|
|
+ iounmap(host->regs);
|
|
+out_disable_clk:
|
|
+ clk_disable(host->mck);
|
|
+ clk_put(host->mck);
|
|
+out_free_host:
|
|
+ mmc_free_host(mmc);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __devexit atmci_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct atmel_mci *host = platform_get_drvdata(pdev);
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+
|
|
+ if (host) {
|
|
+ atmci_cleanup_debugfs(host);
|
|
+
|
|
+ if (host->detect_pin >= 0) {
|
|
+ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
|
|
+ cancel_delayed_work(&host->mmc->detect);
|
|
+ gpio_free(host->detect_pin);
|
|
+ }
|
|
+
|
|
+ mmc_remove_host(host->mmc);
|
|
+
|
|
+ mci_writel(host, IDR, ~0UL);
|
|
+ mci_writel(host, CR, MCI_BIT(MCIDIS));
|
|
+ mci_readl(host, SR);
|
|
+
|
|
+ dma_release_channel(host->dma.req.req.dmac,
|
|
+ host->dma.req.req.channel);
|
|
+
|
|
+ if (host->wp_pin >= 0)
|
|
+ gpio_free(host->wp_pin);
|
|
+
|
|
+ free_irq(platform_get_irq(pdev, 0), host->mmc);
|
|
+ iounmap(host->regs);
|
|
+
|
|
+ clk_disable(host->mck);
|
|
+ clk_put(host->mck);
|
|
+
|
|
+ mmc_free_host(host->mmc);
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver atmci_driver = {
|
|
+ .probe = atmci_probe,
|
|
+ .remove = __devexit_p(atmci_remove),
|
|
+ .driver = {
|
|
+ .name = DRIVER_NAME,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init atmci_init(void)
|
|
+{
|
|
+ return platform_driver_register(&atmci_driver);
|
|
+}
|
|
+
|
|
+static void __exit atmci_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&atmci_driver);
|
|
+}
|
|
+
|
|
+module_init(atmci_init);
|
|
+module_exit(atmci_exit);
|
|
+
|
|
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
|
|
+MODULE_LICENSE("GPL");
|
|
diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
|
|
new file mode 100644
|
|
index 0000000..60d15c4
|
|
--- /dev/null
|
|
+++ b/drivers/mmc/host/atmel-mci.h
|
|
@@ -0,0 +1,192 @@
|
|
+/*
|
|
+ * Atmel MultiMedia Card Interface driver
|
|
+ *
|
|
+ * Copyright (C) 2004-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
|
|
+#define __DRIVERS_MMC_ATMEL_MCI_H__
|
|
+
|
|
+/* MCI register offsets */
|
|
+#define MCI_CR 0x0000
|
|
+#define MCI_MR 0x0004
|
|
+#define MCI_DTOR 0x0008
|
|
+#define MCI_SDCR 0x000c
|
|
+#define MCI_ARGR 0x0010
|
|
+#define MCI_CMDR 0x0014
|
|
+#define MCI_BLKR 0x0018
|
|
+#define MCI_RSPR 0x0020
|
|
+#define MCI_RSPR1 0x0024
|
|
+#define MCI_RSPR2 0x0028
|
|
+#define MCI_RSPR3 0x002c
|
|
+#define MCI_RDR 0x0030
|
|
+#define MCI_TDR 0x0034
|
|
+#define MCI_SR 0x0040
|
|
+#define MCI_IER 0x0044
|
|
+#define MCI_IDR 0x0048
|
|
+#define MCI_IMR 0x004c
|
|
+
|
|
+/* Bitfields in CR */
|
|
+#define MCI_MCIEN_OFFSET 0
|
|
+#define MCI_MCIEN_SIZE 1
|
|
+#define MCI_MCIDIS_OFFSET 1
|
|
+#define MCI_MCIDIS_SIZE 1
|
|
+#define MCI_PWSEN_OFFSET 2
|
|
+#define MCI_PWSEN_SIZE 1
|
|
+#define MCI_PWSDIS_OFFSET 3
|
|
+#define MCI_PWSDIS_SIZE 1
|
|
+#define MCI_SWRST_OFFSET 7
|
|
+#define MCI_SWRST_SIZE 1
|
|
+
|
|
+/* Bitfields in MR */
|
|
+#define MCI_CLKDIV_OFFSET 0
|
|
+#define MCI_CLKDIV_SIZE 8
|
|
+#define MCI_PWSDIV_OFFSET 8
|
|
+#define MCI_PWSDIV_SIZE 3
|
|
+#define MCI_RDPROOF_OFFSET 11
|
|
+#define MCI_RDPROOF_SIZE 1
|
|
+#define MCI_WRPROOF_OFFSET 12
|
|
+#define MCI_WRPROOF_SIZE 1
|
|
+#define MCI_DMAPADV_OFFSET 14
|
|
+#define MCI_DMAPADV_SIZE 1
|
|
+#define MCI_BLKLEN_OFFSET 16
|
|
+#define MCI_BLKLEN_SIZE 16
|
|
+
|
|
+/* Bitfields in DTOR */
|
|
+#define MCI_DTOCYC_OFFSET 0
|
|
+#define MCI_DTOCYC_SIZE 4
|
|
+#define MCI_DTOMUL_OFFSET 4
|
|
+#define MCI_DTOMUL_SIZE 3
|
|
+
|
|
+/* Bitfields in SDCR */
|
|
+#define MCI_SDCSEL_OFFSET 0
|
|
+#define MCI_SDCSEL_SIZE 4
|
|
+#define MCI_SDCBUS_OFFSET 7
|
|
+#define MCI_SDCBUS_SIZE 1
|
|
+
|
|
+/* Bitfields in ARGR */
|
|
+#define MCI_ARG_OFFSET 0
|
|
+#define MCI_ARG_SIZE 32
|
|
+
|
|
+/* Bitfields in CMDR */
|
|
+#define MCI_CMDNB_OFFSET 0
|
|
+#define MCI_CMDNB_SIZE 6
|
|
+#define MCI_RSPTYP_OFFSET 6
|
|
+#define MCI_RSPTYP_SIZE 2
|
|
+#define MCI_SPCMD_OFFSET 8
|
|
+#define MCI_SPCMD_SIZE 3
|
|
+#define MCI_OPDCMD_OFFSET 11
|
|
+#define MCI_OPDCMD_SIZE 1
|
|
+#define MCI_MAXLAT_OFFSET 12
|
|
+#define MCI_MAXLAT_SIZE 1
|
|
+#define MCI_TRCMD_OFFSET 16
|
|
+#define MCI_TRCMD_SIZE 2
|
|
+#define MCI_TRDIR_OFFSET 18
|
|
+#define MCI_TRDIR_SIZE 1
|
|
+#define MCI_TRTYP_OFFSET 19
|
|
+#define MCI_TRTYP_SIZE 2
|
|
+
|
|
+/* Bitfields in BLKR */
|
|
+#define MCI_BCNT_OFFSET 0
|
|
+#define MCI_BCNT_SIZE 16
|
|
+
|
|
+/* Bitfields in RSPRn */
|
|
+#define MCI_RSP_OFFSET 0
|
|
+#define MCI_RSP_SIZE 32
|
|
+
|
|
+/* Bitfields in SR/IER/IDR/IMR */
|
|
+#define MCI_CMDRDY_OFFSET 0
|
|
+#define MCI_CMDRDY_SIZE 1
|
|
+#define MCI_RXRDY_OFFSET 1
|
|
+#define MCI_RXRDY_SIZE 1
|
|
+#define MCI_TXRDY_OFFSET 2
|
|
+#define MCI_TXRDY_SIZE 1
|
|
+#define MCI_BLKE_OFFSET 3
|
|
+#define MCI_BLKE_SIZE 1
|
|
+#define MCI_DTIP_OFFSET 4
|
|
+#define MCI_DTIP_SIZE 1
|
|
+#define MCI_NOTBUSY_OFFSET 5
|
|
+#define MCI_NOTBUSY_SIZE 1
|
|
+#define MCI_ENDRX_OFFSET 6
|
|
+#define MCI_ENDRX_SIZE 1
|
|
+#define MCI_ENDTX_OFFSET 7
|
|
+#define MCI_ENDTX_SIZE 1
|
|
+#define MCI_RXBUFF_OFFSET 14
|
|
+#define MCI_RXBUFF_SIZE 1
|
|
+#define MCI_TXBUFE_OFFSET 15
|
|
+#define MCI_TXBUFE_SIZE 1
|
|
+#define MCI_RINDE_OFFSET 16
|
|
+#define MCI_RINDE_SIZE 1
|
|
+#define MCI_RDIRE_OFFSET 17
|
|
+#define MCI_RDIRE_SIZE 1
|
|
+#define MCI_RCRCE_OFFSET 18
|
|
+#define MCI_RCRCE_SIZE 1
|
|
+#define MCI_RENDE_OFFSET 19
|
|
+#define MCI_RENDE_SIZE 1
|
|
+#define MCI_RTOE_OFFSET 20
|
|
+#define MCI_RTOE_SIZE 1
|
|
+#define MCI_DCRCE_OFFSET 21
|
|
+#define MCI_DCRCE_SIZE 1
|
|
+#define MCI_DTOE_OFFSET 22
|
|
+#define MCI_DTOE_SIZE 1
|
|
+#define MCI_OVRE_OFFSET 30
|
|
+#define MCI_OVRE_SIZE 1
|
|
+#define MCI_UNRE_OFFSET 31
|
|
+#define MCI_UNRE_SIZE 1
|
|
+
|
|
+/* Constants for DTOMUL */
|
|
+#define MCI_DTOMUL_1_CYCLE 0
|
|
+#define MCI_DTOMUL_16_CYCLES 1
|
|
+#define MCI_DTOMUL_128_CYCLES 2
|
|
+#define MCI_DTOMUL_256_CYCLES 3
|
|
+#define MCI_DTOMUL_1024_CYCLES 4
|
|
+#define MCI_DTOMUL_4096_CYCLES 5
|
|
+#define MCI_DTOMUL_65536_CYCLES 6
|
|
+#define MCI_DTOMUL_1048576_CYCLES 7
|
|
+
|
|
+/* Constants for RSPTYP */
|
|
+#define MCI_RSPTYP_NO_RESP 0
|
|
+#define MCI_RSPTYP_48_BIT 1
|
|
+#define MCI_RSPTYP_136_BIT 2
|
|
+
|
|
+/* Constants for SPCMD */
|
|
+#define MCI_SPCMD_NO_SPEC_CMD 0
|
|
+#define MCI_SPCMD_INIT_CMD 1
|
|
+#define MCI_SPCMD_SYNC_CMD 2
|
|
+#define MCI_SPCMD_INT_CMD 4
|
|
+#define MCI_SPCMD_INT_RESP 5
|
|
+
|
|
+/* Constants for TRCMD */
|
|
+#define MCI_TRCMD_NO_TRANS 0
|
|
+#define MCI_TRCMD_START_TRANS 1
|
|
+#define MCI_TRCMD_STOP_TRANS 2
|
|
+
|
|
+/* Constants for TRTYP */
|
|
+#define MCI_TRTYP_BLOCK 0
|
|
+#define MCI_TRTYP_MULTI_BLOCK 1
|
|
+#define MCI_TRTYP_STREAM 2
|
|
+
|
|
+/* Bit manipulation macros */
|
|
+#define MCI_BIT(name) \
|
|
+ (1 << MCI_##name##_OFFSET)
|
|
+#define MCI_BF(name,value) \
|
|
+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
|
|
+ << MCI_##name##_OFFSET)
|
|
+#define MCI_BFEXT(name,value) \
|
|
+ (((value) >> MCI_##name##_OFFSET) \
|
|
+ & ((1 << MCI_##name##_SIZE) - 1))
|
|
+#define MCI_BFINS(name,value,old) \
|
|
+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
|
|
+ << MCI_##name##_OFFSET)) \
|
|
+ | MCI_BF(name,value))
|
|
+
|
|
+/* Register access macros */
|
|
+#define mci_readl(port,reg) \
|
|
+ __raw_readl((port)->regs + MCI_##reg)
|
|
+#define mci_writel(port,reg,value) \
|
|
+ __raw_writel((value), (port)->regs + MCI_##reg)
|
|
+
|
|
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
|
|
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
|
|
index 1707f98..d2ec6eb 100644
|
|
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
|
|
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
|
|
@@ -50,6 +50,7 @@
|
|
#define I82802AC 0x00ac
|
|
#define MANUFACTURER_ST 0x0020
|
|
#define M50LPW080 0x002F
|
|
+#define AT49BV640D 0x02de
|
|
|
|
static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
|
static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
|
@@ -157,6 +158,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
|
|
}
|
|
#endif
|
|
|
|
+/* Atmel chips don't use the same PRI format as Intel chips */
|
|
+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
|
|
+{
|
|
+ struct map_info *map = mtd->priv;
|
|
+ struct cfi_private *cfi = map->fldrv_priv;
|
|
+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
|
|
+ struct cfi_pri_atmel atmel_pri;
|
|
+ uint32_t features = 0;
|
|
+
|
|
+ /* Reverse byteswapping */
|
|
+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
|
|
+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
|
|
+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
|
|
+
|
|
+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
|
|
+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
|
|
+
|
|
+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
|
|
+
|
|
+ if (atmel_pri.Features & 0x01) /* chip erase supported */
|
|
+ features |= (1<<0);
|
|
+ if (atmel_pri.Features & 0x02) /* erase suspend supported */
|
|
+ features |= (1<<1);
|
|
+ if (atmel_pri.Features & 0x04) /* program suspend supported */
|
|
+ features |= (1<<2);
|
|
+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
|
|
+ features |= (1<<9);
|
|
+ if (atmel_pri.Features & 0x20) /* page mode read supported */
|
|
+ features |= (1<<7);
|
|
+ if (atmel_pri.Features & 0x40) /* queued erase supported */
|
|
+ features |= (1<<4);
|
|
+ if (atmel_pri.Features & 0x80) /* Protection bits supported */
|
|
+ features |= (1<<6);
|
|
+
|
|
+ extp->FeatureSupport = features;
|
|
+
|
|
+ /* burst write mode not supported */
|
|
+ cfi->cfiq->BufWriteTimeoutTyp = 0;
|
|
+ cfi->cfiq->BufWriteTimeoutMax = 0;
|
|
+}
|
|
+
|
|
#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
|
|
/* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
|
|
static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
|
|
@@ -234,6 +276,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
|
|
}
|
|
|
|
static struct cfi_fixup cfi_fixup_table[] = {
|
|
+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
|
|
#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
|
|
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
|
|
#endif
|
|
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
index 389acc6..571226e 100644
|
|
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
|
@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
|
|
extp->TopBottom = 2;
|
|
else
|
|
extp->TopBottom = 3;
|
|
+
|
|
+ /* burst write mode not supported */
|
|
+ cfi->cfiq->BufWriteTimeoutTyp = 0;
|
|
+ cfi->cfiq->BufWriteTimeoutMax = 0;
|
|
}
|
|
|
|
static void fixup_use_secsi(struct mtd_info *mtd, void *param)
|
|
@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
|
|
}
|
|
|
|
static struct cfi_fixup cfi_fixup_table[] = {
|
|
+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
|
|
#ifdef AMD_BOOTLOC_BUG
|
|
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
|
|
#endif
|
|
@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
|
|
#if !FORCE_WORD_WRITE
|
|
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
|
|
#endif
|
|
- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
|
|
{ 0, 0, NULL, NULL }
|
|
};
|
|
static struct cfi_fixup jedec_fixup_table[] = {
|
|
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
|
|
index 519b4ff..847f983 100644
|
|
--- a/drivers/pcmcia/Kconfig
|
|
+++ b/drivers/pcmcia/Kconfig
|
|
@@ -276,6 +276,13 @@ config ELECTRA_CF
|
|
Say Y here to support the CompactFlash controller on the
|
|
PA Semi Electra eval board.
|
|
|
|
+config AT32_CF
|
|
+ tristate "AT32AP CompactFlash Controller"
|
|
+ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
|
|
+ help
|
|
+ Say Y here to support the CompactFlash controller on AT32 chips.
|
|
+ Or choose M to compile the driver as a module named "at32_cf".
|
|
+
|
|
config PCCARD_NONSTATIC
|
|
tristate
|
|
|
|
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
|
|
index 6f6478b..3526fd8 100644
|
|
--- a/drivers/pcmcia/Makefile
|
|
+++ b/drivers/pcmcia/Makefile
|
|
@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
|
|
obj-$(CONFIG_OMAP_CF) += omap_cf.o
|
|
obj-$(CONFIG_AT91_CF) += at91_cf.o
|
|
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
|
|
+obj-$(CONFIG_AT32_CF) += at32_cf.o
|
|
|
|
sa11xx_core-y += soc_common.o sa11xx_base.o
|
|
pxa2xx_core-y += soc_common.o pxa2xx_base.o
|
|
diff --git a/drivers/pcmcia/at32_cf.c b/drivers/pcmcia/at32_cf.c
|
|
new file mode 100644
|
|
index 0000000..010bdfd
|
|
--- /dev/null
|
|
+++ b/drivers/pcmcia/at32_cf.c
|
|
@@ -0,0 +1,533 @@
|
|
+/*
|
|
+ * Driver for AVR32 Static Memory Controller: CompactFlash support
|
|
+ *
|
|
+ * Copyright (C) 2006 Atmel Norway
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of the
|
|
+ * License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful, but
|
|
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
+ * General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
|
|
+ * 02111-1307, USA.
|
|
+ *
|
|
+ * The full GNU General Public License is included in this
|
|
+ * distribution in the file called COPYING.
|
|
+ */
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+
|
|
+#include <pcmcia/ss.h>
|
|
+
|
|
+#include <asm/gpio.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/arch/board.h>
|
|
+
|
|
+#include <asm/arch/smc.h>
|
|
+
|
|
+struct at32_cf_socket {
|
|
+ struct pcmcia_socket socket;
|
|
+ int detect_pin;
|
|
+ int reset_pin;
|
|
+ int vcc_pin;
|
|
+ int ready_pin;
|
|
+ struct resource res_attr;
|
|
+ struct resource res_mem;
|
|
+ struct resource res_io;
|
|
+ struct smc_config smc;
|
|
+ unsigned int irq;
|
|
+ unsigned int cf_cs;
|
|
+ socket_state_t state;
|
|
+ unsigned present:1;
|
|
+};
|
|
+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
|
|
+
|
|
+/*
|
|
+ * We have the following memory layout relative to the base address:
|
|
+ *
|
|
+ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
|
|
+ * True IDE Mode: 00c0 0000 -> 00df ffff
|
|
+ * I/O memory: 0080 0000 -> 00bf ffff
|
|
+ * Common memory: 0040 0000 -> 007f ffff
|
|
+ * Attribute memory: 0000 0000 -> 003f ffff
|
|
+ */
|
|
+#define CF_ATTR_OFFSET 0x00000000
|
|
+#define CF_MEM_OFFSET 0x00400000
|
|
+#define CF_IO_OFFSET 0x00800000
|
|
+#define CF_RES_SIZE 4096
|
|
+
|
|
+#ifdef DEBUG
|
|
+
|
|
+static int pc_debug;
|
|
+module_param(pc_debug, int, 0644);
|
|
+
|
|
+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
|
|
+ int level, const char *fmt, ...)
|
|
+{
|
|
+ va_list args;
|
|
+
|
|
+ if (pc_debug > level) {
|
|
+ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
|
|
+ va_start(args, fmt);
|
|
+ vprintk(fmt, args);
|
|
+ va_end(args);
|
|
+ }
|
|
+}
|
|
+
|
|
+#define debug(cf, lvl, fmt, arg...) \
|
|
+ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
|
|
+
|
|
+#else
|
|
+#define debug(cf, lvl, fmt, arg...) do { } while (0)
|
|
+#endif
|
|
+
|
|
+static inline int at32_cf_present(struct at32_cf_socket *cf)
|
|
+{
|
|
+ int present = 1;
|
|
+
|
|
+ /* If we don't have a detect pin, assume the card is present */
|
|
+ if (cf->detect_pin >= 0)
|
|
+ present = !gpio_get_value(cf->detect_pin);
|
|
+
|
|
+ return present;
|
|
+}
|
|
+
|
|
+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
|
|
+{
|
|
+ struct at32_cf_socket *cf = dev_id;
|
|
+ unsigned int present;
|
|
+
|
|
+ present = at32_cf_present(cf);
|
|
+ if (present != cf->present) {
|
|
+ cf->present = present;
|
|
+ debug(cf, 3, "card %s\n", present ? "present" : "gone");
|
|
+ pcmcia_parse_events(&cf->socket, SS_DETECT);
|
|
+ }
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
|
|
+{
|
|
+ struct at32_cf_socket *cf;
|
|
+ u_int status = 0;
|
|
+
|
|
+ cf = container_of(sock, struct at32_cf_socket, socket);
|
|
+
|
|
+ if (at32_cf_present(cf)) {
|
|
+ /* NOTE: gpio on AP7xxx is 3.3V */
|
|
+ status = SS_DETECT | SS_3VCARD;
|
|
+ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
|
|
+ status |= SS_READY;
|
|
+ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
|
|
+ status |= SS_POWERON;
|
|
+ }
|
|
+
|
|
+ *value = status;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
|
|
+{
|
|
+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
|
|
+
|
|
+ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
|
|
+ (state->csc_mask==0)?"<NONE> ":"",
|
|
+ (state->csc_mask&SS_DETECT)?"DETECT ":"",
|
|
+ (state->csc_mask&SS_READY)?"READY ":"",
|
|
+ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
|
|
+ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
|
|
+ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
|
|
+ (state->flags==0)?"<NONE> ":"",
|
|
+ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
|
|
+ (state->flags&SS_IOCARD)?"IOCARD ":"",
|
|
+ (state->flags&SS_RESET)?"RESET ":"",
|
|
+ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
|
|
+ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
|
|
+ state->Vcc, state->Vpp, state->io_irq);
|
|
+
|
|
+ /*
|
|
+ * TODO: Allow boards to override this in case they have level
|
|
+ * converters.
|
|
+ */
|
|
+ switch (state->Vcc) {
|
|
+ case 0:
|
|
+ if (cf->vcc_pin >= 0)
|
|
+ gpio_set_value(cf->vcc_pin, 0);
|
|
+ break;
|
|
+ case 33:
|
|
+ if (cf->vcc_pin >= 0)
|
|
+ gpio_set_value(cf->vcc_pin, 1);
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ if (cf->reset_pin >= 0)
|
|
+ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
|
|
+
|
|
+ cf->state = *state;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int at32_cf_socket_init(struct pcmcia_socket *sock)
|
|
+{
|
|
+ debug(to_at32_cf(sock), 2, "called\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int at32_cf_suspend(struct pcmcia_socket *sock)
|
|
+{
|
|
+ debug(to_at32_cf(sock), 2, "called\n");
|
|
+
|
|
+ at32_cf_set_socket(sock, &dead_socket);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
|
|
+ struct pccard_io_map *map)
|
|
+{
|
|
+ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
|
|
+ int retval;
|
|
+
|
|
+ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
|
|
+ map->map, map->speed, map->start, map->stop);
|
|
+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
|
|
+ (map->flags == 0) ? "<NONE>":"",
|
|
+ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
|
|
+ (map->flags & MAP_16BIT) ? "16BIT " : "",
|
|
+ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
|
|
+ (map->flags & MAP_0WS) ? "0WS " : "",
|
|
+ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
|
|
+ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
|
|
+ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
|
|
+
|
|
+ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
|
|
+
|
|
+ if (map->flags & MAP_16BIT)
|
|
+ cf->smc.bus_width = 2;
|
|
+ else
|
|
+ cf->smc.bus_width = 1;
|
|
+
|
|
+ if (map->flags & MAP_USE_WAIT)
|
|
+ cf->smc.nwait_mode = 3;
|
|
+ else
|
|
+ cf->smc.nwait_mode = 0;
|
|
+
|
|
+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
|
|
+ if (retval) {
|
|
+ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
|
|
+ return retval;
|
|
+ }
|
|
+
|
|
+ map->start = cf->socket.io_offset;
|
|
+ map->stop = map->start + CF_RES_SIZE - 1;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int
|
|
+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
|
|
+{
|
|
+ struct at32_cf_socket *cf;
|
|
+ struct resource *res;
|
|
+ int retval;
|
|
+
|
|
+ cf = container_of(sock, struct at32_cf_socket, socket);
|
|
+
|
|
+ debug(cf, 2, "map %u speed %u card_start %08x\n",
|
|
+ map->map, map->speed, map->card_start);
|
|
+ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
|
|
+ (map->flags==0)?"<NONE>":"",
|
|
+ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
|
|
+ (map->flags&MAP_16BIT)?"16BIT ":"",
|
|
+ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
|
|
+ (map->flags&MAP_0WS)?"0WS ":"",
|
|
+ (map->flags&MAP_WRPROT)?"WRPROT ":"",
|
|
+ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
|
|
+ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
|
|
+
|
|
+ if (map->card_start)
|
|
+ return -EINVAL;
|
|
+
|
|
+ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
|
|
+
|
|
+ if (map->flags & MAP_ATTRIB) {
|
|
+ res = &cf->res_attr;
|
|
+
|
|
+ /* Linksys WCF12 seems to use WAIT when reading CIS */
|
|
+ map->flags |= MAP_USE_WAIT;
|
|
+ } else {
|
|
+ res = &cf->res_mem;
|
|
+ }
|
|
+
|
|
+ if (map->flags & MAP_USE_WAIT)
|
|
+ cf->smc.nwait_mode = 3;
|
|
+ else
|
|
+ cf->smc.nwait_mode = 0;
|
|
+
|
|
+ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
|
|
+ if (retval) {
|
|
+ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
|
|
+ return retval;
|
|
+ }
|
|
+
|
|
+ map->static_start = res->start;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct pccard_operations at32_cf_ops = {
|
|
+ .init = at32_cf_socket_init,
|
|
+ .suspend = at32_cf_suspend,
|
|
+ .get_status = at32_cf_get_status,
|
|
+ .set_socket = at32_cf_set_socket,
|
|
+ .set_io_map = at32_cf_set_io_map,
|
|
+ .set_mem_map = at32_cf_set_mem_map,
|
|
+};
|
|
+
|
|
+static int __init request_pin(struct platform_device *pdev,
|
|
+ unsigned int pin, const char *name)
|
|
+{
|
|
+ if (gpio_request(pin, name)) {
|
|
+ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
|
|
+ return -1;
|
|
+ }
|
|
+
|
|
+ return pin;
|
|
+}
|
|
+
|
|
+static struct smc_timing at32_cf_timing __initdata = {
|
|
+ .ncs_read_setup = 30,
|
|
+ .nrd_setup = 100,
|
|
+ .ncs_write_setup = 30,
|
|
+ .nwe_setup = 100,
|
|
+
|
|
+ .ncs_read_pulse = 360,
|
|
+ .nrd_pulse = 290,
|
|
+ .ncs_write_pulse = 360,
|
|
+ .nwe_pulse = 290,
|
|
+
|
|
+ .read_cycle = 420,
|
|
+ .write_cycle = 420,
|
|
+};
|
|
+
|
|
+static int __init at32_cf_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct at32_cf_socket *cf;
|
|
+ struct cf_platform_data *board = pdev->dev.platform_data;
|
|
+ struct resource *res_skt;
|
|
+ int irq;
|
|
+ int ret;
|
|
+
|
|
+ dev_dbg(&pdev->dev, "probe");
|
|
+
|
|
+ if (!board)
|
|
+ return -ENXIO;
|
|
+
|
|
+ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res_skt)
|
|
+ return -ENXIO;
|
|
+
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
+ if (irq < 0)
|
|
+ return irq;
|
|
+
|
|
+ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
|
|
+ if (!cf)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ cf->detect_pin = -1;
|
|
+ cf->reset_pin = -1;
|
|
+ cf->vcc_pin = -1;
|
|
+ cf->ready_pin = -1;
|
|
+ cf->cf_cs = board->cs;
|
|
+
|
|
+ if (board->detect_pin != GPIO_PIN_NONE)
|
|
+ cf->detect_pin = request_pin(pdev, board->detect_pin,
|
|
+ "cf_detect");
|
|
+ if (board->reset_pin != GPIO_PIN_NONE)
|
|
+ cf->reset_pin = request_pin(pdev, board->reset_pin,
|
|
+ "cf_reset");
|
|
+ if (board->vcc_pin != GPIO_PIN_NONE)
|
|
+ cf->vcc_pin = request_pin(pdev, board->vcc_pin,
|
|
+ "cf_vcc");
|
|
+ if (board->ready_pin != GPIO_PIN_NONE)
|
|
+ /* READY is also used for irq through EIM */
|
|
+ cf->ready_pin = board->ready_pin;
|
|
+
|
|
+ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
|
|
+ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
|
|
+
|
|
+ cf->socket.pci_irq = irq;
|
|
+ cf->socket.ops = &at32_cf_ops;
|
|
+ cf->socket.resource_ops = &pccard_static_ops;
|
|
+ cf->socket.dev.parent = &pdev->dev;
|
|
+ cf->socket.owner = THIS_MODULE;
|
|
+ cf->socket.features =
|
|
+ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
|
|
+ cf->socket.map_size = CF_RES_SIZE;
|
|
+
|
|
+ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
|
|
+ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
|
|
+ cf->res_attr.name = "attribute";
|
|
+ cf->res_attr.flags = IORESOURCE_MEM;
|
|
+ ret = request_resource(res_skt, &cf->res_attr);
|
|
+ if (ret)
|
|
+ goto err_request_res_attr;
|
|
+
|
|
+ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
|
|
+ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
|
|
+ cf->res_mem.name = "memory";
|
|
+ cf->res_mem.flags = IORESOURCE_MEM;
|
|
+ ret = request_resource(res_skt, &cf->res_mem);
|
|
+ if (ret)
|
|
+ goto err_request_res_mem;
|
|
+
|
|
+ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
|
|
+ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
|
|
+ cf->res_io.name = "io";
|
|
+ cf->res_io.flags = IORESOURCE_MEM;
|
|
+ ret = request_resource(res_skt, &cf->res_io);
|
|
+ if (ret)
|
|
+ goto err_request_res_io;
|
|
+
|
|
+ cf->socket.io_offset = cf->res_io.start;
|
|
+
|
|
+ if (cf->detect_pin >= 0) {
|
|
+ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
|
|
+ IRQF_SHARED, "cf_detect", cf);
|
|
+ if (ret) {
|
|
+ debug(cf, 1,
|
|
+ "failed to request cf_detect interrupt\n");
|
|
+ goto err_detect_irq;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ cf->present = at32_cf_present(cf);
|
|
+
|
|
+ /* Setup SMC timings */
|
|
+ smc_set_timing(&cf->smc, &at32_cf_timing);
|
|
+
|
|
+ cf->smc.bus_width = 2;
|
|
+ cf->smc.nrd_controlled = 1;
|
|
+ cf->smc.nwe_controlled = 1;
|
|
+ cf->smc.nwait_mode = 0;
|
|
+ cf->smc.byte_write = 0;
|
|
+ cf->smc.tdf_cycles = 8;
|
|
+ cf->smc.tdf_mode = 0;
|
|
+
|
|
+ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
|
|
+ if (ret) {
|
|
+ debug(cf, 1, "failed to configure SMC\n", ret);
|
|
+ goto err_smc;
|
|
+ }
|
|
+
|
|
+ ret = pcmcia_register_socket(&cf->socket);
|
|
+ if (ret) {
|
|
+ debug(cf, 1, "failed to register socket: %d\n", ret);
|
|
+ goto err_register_socket;
|
|
+ }
|
|
+
|
|
+ if (cf->reset_pin >= 0)
|
|
+ gpio_direction_output(cf->reset_pin, 0);
|
|
+
|
|
+ platform_set_drvdata(pdev, cf);
|
|
+
|
|
+ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
|
|
+ (unsigned long)res_skt->start);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_register_socket:
|
|
+err_smc:
|
|
+ if (cf->detect_pin >= 0)
|
|
+ free_irq(gpio_to_irq(cf->detect_pin), cf);
|
|
+err_detect_irq:
|
|
+ release_resource(&cf->res_io);
|
|
+err_request_res_io:
|
|
+ release_resource(&cf->res_mem);
|
|
+err_request_res_mem:
|
|
+ release_resource(&cf->res_attr);
|
|
+err_request_res_attr:
|
|
+ if (cf->vcc_pin >= 0)
|
|
+ gpio_free(cf->vcc_pin);
|
|
+ if (cf->reset_pin >= 0)
|
|
+ gpio_free(cf->reset_pin);
|
|
+ if (cf->detect_pin >= 0)
|
|
+ gpio_free(cf->detect_pin);
|
|
+ kfree(cf);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __exit at32_cf_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
|
|
+
|
|
+ pcmcia_unregister_socket(&cf->socket);
|
|
+ if (cf->detect_pin >= 0) {
|
|
+ free_irq(gpio_to_irq(cf->detect_pin), cf);
|
|
+ gpio_free(cf->detect_pin);
|
|
+ }
|
|
+ if (cf->vcc_pin >= 0)
|
|
+ gpio_free(cf->vcc_pin);
|
|
+ if (cf->reset_pin >= 0)
|
|
+ gpio_free(cf->reset_pin);
|
|
+
|
|
+ release_resource(&cf->res_io);
|
|
+ release_resource(&cf->res_mem);
|
|
+ release_resource(&cf->res_attr);
|
|
+ kfree(cf);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver at32_cf_driver = {
|
|
+ .remove = __exit_p(at32_cf_remove),
|
|
+ .driver = {
|
|
+ .name = "at32_cf",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init at32_cf_init(void)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
|
|
+ if (ret)
|
|
+ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void __exit at32_cf_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&at32_cf_driver);
|
|
+}
|
|
+
|
|
+module_init(at32_cf_init);
|
|
+module_exit(at32_cf_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
|
|
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
|
|
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
|
|
index d7e1996..67bfbb0 100644
|
|
--- a/drivers/serial/Kconfig
|
|
+++ b/drivers/serial/Kconfig
|
|
@@ -380,6 +380,21 @@ config SERIAL_ATMEL_CONSOLE
|
|
console is the device which receives all kernel messages and
|
|
warnings and which allows logins in single user mode).
|
|
|
|
+config SERIAL_ATMEL_PDC
|
|
+ bool "Support DMA transfers on AT91 / AT32 serial port"
|
|
+ depends on SERIAL_ATMEL
|
|
+ default y
|
|
+ help
|
|
+ Say Y here if you wish to use the PDC to do DMA transfers to
|
|
+ and from the Atmel AT91 / AT32 serial port. In order to
|
|
+ actually use DMA transfers, make sure that the use_dma_tx
|
|
+ and use_dma_rx members in the atmel_uart_data struct is set
|
|
+ appropriately for each port.
|
|
+
|
|
+ Note that break and error handling currently doesn't work
|
|
+ properly when DMA is enabled. Make sure that ports where
|
|
+ this matters don't use DMA.
|
|
+
|
|
config SERIAL_ATMEL_TTYAT
|
|
bool "Install as device ttyATn instead of ttySn"
|
|
depends on SERIAL_ATMEL=y
|
|
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
|
|
index 111da57..477950f 100644
|
|
--- a/drivers/serial/atmel_serial.c
|
|
+++ b/drivers/serial/atmel_serial.c
|
|
@@ -7,6 +7,8 @@
|
|
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
+ * DMA support added by Chip Coldwell.
|
|
+ *
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
@@ -33,6 +35,7 @@
|
|
#include <linux/sysrq.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/platform_device.h>
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/atmel_pdc.h>
|
|
|
|
#include <asm/io.h>
|
|
@@ -47,6 +50,10 @@
|
|
|
|
#include "atmel_serial.h"
|
|
|
|
+#define PDC_BUFFER_SIZE 512
|
|
+/* Revisit: We should calculate this based on the actual port settings */
|
|
+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
|
|
+
|
|
#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
@@ -74,6 +81,7 @@
|
|
|
|
#define ATMEL_ISR_PASS_LIMIT 256
|
|
|
|
+/* UART registers. CR is write-only, hence no GET macro */
|
|
#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
|
|
#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
|
|
#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
|
|
@@ -87,8 +95,6 @@
|
|
#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
|
|
#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
|
|
|
|
-// #define UART_GET_CR(port) __raw_readl((port)->membase + ATMEL_US_CR) // is write-only
|
|
-
|
|
/* PDC registers */
|
|
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
|
|
#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
|
|
@@ -101,12 +107,24 @@
|
|
|
|
#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
|
|
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
|
|
-//#define UART_PUT_TNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
|
|
-//#define UART_PUT_TNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
|
|
|
|
static int (*atmel_open_hook)(struct uart_port *);
|
|
static void (*atmel_close_hook)(struct uart_port *);
|
|
|
|
+struct atmel_dma_buffer {
|
|
+ unsigned char *buf;
|
|
+ dma_addr_t dma_addr;
|
|
+ unsigned int dma_size;
|
|
+ unsigned int ofs;
|
|
+};
|
|
+
|
|
+struct atmel_uart_char {
|
|
+ u16 status;
|
|
+ u16 ch;
|
|
+};
|
|
+
|
|
+#define ATMEL_SERIAL_RINGSIZE 1024
|
|
+
|
|
/*
|
|
* We wrap our port structure around the generic uart_port.
|
|
*/
|
|
@@ -115,6 +133,19 @@ struct atmel_uart_port {
|
|
struct clk *clk; /* uart clock */
|
|
unsigned short suspended; /* is port suspended? */
|
|
int break_active; /* break being received */
|
|
+
|
|
+ short use_dma_rx; /* enable PDC receiver */
|
|
+ short pdc_rx_idx; /* current PDC RX buffer */
|
|
+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
|
|
+
|
|
+ short use_dma_tx; /* enable PDC transmitter */
|
|
+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
|
|
+
|
|
+ struct tasklet_struct tasklet;
|
|
+ unsigned int irq_status;
|
|
+ unsigned int irq_status_prev;
|
|
+
|
|
+ struct circ_buf rx_ring;
|
|
};
|
|
|
|
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
|
|
@@ -123,6 +154,38 @@ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
|
|
static struct console atmel_console;
|
|
#endif
|
|
|
|
+static inline struct atmel_uart_port *
|
|
+to_atmel_uart_port(struct uart_port *uart)
|
|
+{
|
|
+ return container_of(uart, struct atmel_uart_port, uart);
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_SERIAL_ATMEL_PDC
|
|
+static bool atmel_use_dma_rx(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+
|
|
+ return atmel_port->use_dma_rx;
|
|
+}
|
|
+
|
|
+static bool atmel_use_dma_tx(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+
|
|
+ return atmel_port->use_dma_tx;
|
|
+}
|
|
+#else
|
|
+static bool atmel_use_dma_rx(struct uart_port *port)
|
|
+{
|
|
+ return false;
|
|
+}
|
|
+
|
|
+static bool atmel_use_dma_tx(struct uart_port *port)
|
|
+{
|
|
+ return false;
|
|
+}
|
|
+#endif
|
|
+
|
|
/*
|
|
* Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
|
|
*/
|
|
@@ -142,8 +205,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
|
|
#ifdef CONFIG_ARCH_AT91RM9200
|
|
if (cpu_is_at91rm9200()) {
|
|
/*
|
|
- * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
|
|
- * We need to drive the pin manually.
|
|
+ * AT91RM9200 Errata #39: RTS0 is not internally connected
|
|
+ * to PA21. We need to drive the pin manually.
|
|
*/
|
|
if (port->mapbase == AT91RM9200_BASE_US0) {
|
|
if (mctrl & TIOCM_RTS)
|
|
@@ -204,7 +267,12 @@ static u_int atmel_get_mctrl(struct uart_port *port)
|
|
*/
|
|
static void atmel_stop_tx(struct uart_port *port)
|
|
{
|
|
- UART_PUT_IDR(port, ATMEL_US_TXRDY);
|
|
+ if (atmel_use_dma_tx(port)) {
|
|
+ /* disable PDC transmit */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
|
|
+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
|
|
+ } else
|
|
+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
|
|
}
|
|
|
|
/*
|
|
@@ -212,7 +280,17 @@ static void atmel_stop_tx(struct uart_port *port)
|
|
*/
|
|
static void atmel_start_tx(struct uart_port *port)
|
|
{
|
|
- UART_PUT_IER(port, ATMEL_US_TXRDY);
|
|
+ if (atmel_use_dma_tx(port)) {
|
|
+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
|
|
+ /* The transmitter is already running. Yes, we
|
|
+ really need this.*/
|
|
+ return;
|
|
+
|
|
+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
|
|
+ /* re-enable PDC transmit */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
|
|
+ } else
|
|
+ UART_PUT_IER(port, ATMEL_US_TXRDY);
|
|
}
|
|
|
|
/*
|
|
@@ -220,7 +298,12 @@ static void atmel_start_tx(struct uart_port *port)
|
|
*/
|
|
static void atmel_stop_rx(struct uart_port *port)
|
|
{
|
|
- UART_PUT_IDR(port, ATMEL_US_RXRDY);
|
|
+ if (atmel_use_dma_rx(port)) {
|
|
+ /* disable PDC receive */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
|
|
+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
|
|
+ } else
|
|
+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
|
|
}
|
|
|
|
/*
|
|
@@ -228,7 +311,8 @@ static void atmel_stop_rx(struct uart_port *port)
|
|
*/
|
|
static void atmel_enable_ms(struct uart_port *port)
|
|
{
|
|
- UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
|
|
+ UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
|
|
+ | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
|
|
}
|
|
|
|
/*
|
|
@@ -243,22 +327,63 @@ static void atmel_break_ctl(struct uart_port *port, int break_state)
|
|
}
|
|
|
|
/*
|
|
+ * Stores the incoming character in the ring buffer
|
|
+ */
|
|
+static void
|
|
+atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
|
|
+ unsigned int ch)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ struct circ_buf *ring = &atmel_port->rx_ring;
|
|
+ struct atmel_uart_char *c;
|
|
+
|
|
+ if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
|
|
+ /* Buffer overflow, ignore char */
|
|
+ return;
|
|
+
|
|
+ c = &((struct atmel_uart_char *)ring->buf)[ring->head];
|
|
+ c->status = status;
|
|
+ c->ch = ch;
|
|
+
|
|
+ /* Make sure the character is stored before we update head. */
|
|
+ smp_wmb();
|
|
+
|
|
+ ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Deal with parity, framing and overrun errors.
|
|
+ */
|
|
+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
|
|
+{
|
|
+ /* clear error */
|
|
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
|
|
+
|
|
+ if (status & ATMEL_US_RXBRK) {
|
|
+ /* ignore side-effect */
|
|
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
|
|
+ port->icount.brk++;
|
|
+ }
|
|
+ if (status & ATMEL_US_PARE)
|
|
+ port->icount.parity++;
|
|
+ if (status & ATMEL_US_FRAME)
|
|
+ port->icount.frame++;
|
|
+ if (status & ATMEL_US_OVRE)
|
|
+ port->icount.overrun++;
|
|
+}
|
|
+
|
|
+/*
|
|
* Characters received (called from interrupt handler)
|
|
*/
|
|
static void atmel_rx_chars(struct uart_port *port)
|
|
{
|
|
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
- struct tty_struct *tty = port->info->tty;
|
|
- unsigned int status, ch, flg;
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ unsigned int status, ch;
|
|
|
|
status = UART_GET_CSR(port);
|
|
while (status & ATMEL_US_RXRDY) {
|
|
ch = UART_GET_CHAR(port);
|
|
|
|
- port->icount.rx++;
|
|
-
|
|
- flg = TTY_NORMAL;
|
|
-
|
|
/*
|
|
* note that the error handling code is
|
|
* out of the main execution path
|
|
@@ -266,15 +391,14 @@ static void atmel_rx_chars(struct uart_port *port)
|
|
if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
|
|
| ATMEL_US_OVRE | ATMEL_US_RXBRK)
|
|
|| atmel_port->break_active)) {
|
|
- UART_PUT_CR(port, ATMEL_US_RSTSTA); /* clear error */
|
|
+
|
|
+ /* clear error */
|
|
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
|
|
+
|
|
if (status & ATMEL_US_RXBRK
|
|
&& !atmel_port->break_active) {
|
|
- status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
|
|
- port->icount.brk++;
|
|
atmel_port->break_active = 1;
|
|
UART_PUT_IER(port, ATMEL_US_RXBRK);
|
|
- if (uart_handle_break(port))
|
|
- goto ignore_char;
|
|
} else {
|
|
/*
|
|
* This is either the end-of-break
|
|
@@ -287,52 +411,30 @@ static void atmel_rx_chars(struct uart_port *port)
|
|
status &= ~ATMEL_US_RXBRK;
|
|
atmel_port->break_active = 0;
|
|
}
|
|
- if (status & ATMEL_US_PARE)
|
|
- port->icount.parity++;
|
|
- if (status & ATMEL_US_FRAME)
|
|
- port->icount.frame++;
|
|
- if (status & ATMEL_US_OVRE)
|
|
- port->icount.overrun++;
|
|
-
|
|
- status &= port->read_status_mask;
|
|
-
|
|
- if (status & ATMEL_US_RXBRK)
|
|
- flg = TTY_BREAK;
|
|
- else if (status & ATMEL_US_PARE)
|
|
- flg = TTY_PARITY;
|
|
- else if (status & ATMEL_US_FRAME)
|
|
- flg = TTY_FRAME;
|
|
}
|
|
|
|
- if (uart_handle_sysrq_char(port, ch))
|
|
- goto ignore_char;
|
|
-
|
|
- uart_insert_char(port, status, ATMEL_US_OVRE, ch, flg);
|
|
-
|
|
- ignore_char:
|
|
+ atmel_buffer_rx_char(port, status, ch);
|
|
status = UART_GET_CSR(port);
|
|
}
|
|
|
|
- tty_flip_buffer_push(tty);
|
|
+ tasklet_schedule(&atmel_port->tasklet);
|
|
}
|
|
|
|
/*
|
|
- * Transmit characters (called from interrupt handler)
|
|
+ * Transmit characters (called from tasklet with TXRDY interrupt
|
|
+ * disabled)
|
|
*/
|
|
static void atmel_tx_chars(struct uart_port *port)
|
|
{
|
|
struct circ_buf *xmit = &port->info->xmit;
|
|
|
|
- if (port->x_char) {
|
|
+ if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
|
|
UART_PUT_CHAR(port, port->x_char);
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
- return;
|
|
}
|
|
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
|
- atmel_stop_tx(port);
|
|
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
|
|
return;
|
|
- }
|
|
|
|
while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
|
|
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
|
|
@@ -345,8 +447,88 @@ static void atmel_tx_chars(struct uart_port *port)
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
|
|
- if (uart_circ_empty(xmit))
|
|
- atmel_stop_tx(port);
|
|
+ if (!uart_circ_empty(xmit))
|
|
+ UART_PUT_IER(port, ATMEL_US_TXRDY);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * receive interrupt handler.
|
|
+ */
|
|
+static void
|
|
+atmel_handle_receive(struct uart_port *port, unsigned int pending)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+
|
|
+ if (atmel_use_dma_rx(port)) {
|
|
+ /*
|
|
+ * PDC receive. Just schedule the tasklet and let it
|
|
+ * figure out the details.
|
|
+ *
|
|
+ * TODO: We're not handling error flags correctly at
|
|
+ * the moment.
|
|
+ */
|
|
+ if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
|
|
+ UART_PUT_IDR(port, (ATMEL_US_ENDRX
|
|
+ | ATMEL_US_TIMEOUT));
|
|
+ tasklet_schedule(&atmel_port->tasklet);
|
|
+ }
|
|
+
|
|
+ if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
|
|
+ ATMEL_US_FRAME | ATMEL_US_PARE))
|
|
+ atmel_pdc_rxerr(port, pending);
|
|
+ }
|
|
+
|
|
+ /* Interrupt receive */
|
|
+ if (pending & ATMEL_US_RXRDY)
|
|
+ atmel_rx_chars(port);
|
|
+ else if (pending & ATMEL_US_RXBRK) {
|
|
+ /*
|
|
+ * End of break detected. If it came along with a
|
|
+ * character, atmel_rx_chars will handle it.
|
|
+ */
|
|
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
|
|
+ UART_PUT_IDR(port, ATMEL_US_RXBRK);
|
|
+ atmel_port->break_active = 0;
|
|
+ }
|
|
+}
|
|
+
|
|
+/*
|
|
+ * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
|
|
+ */
|
|
+static void
|
|
+atmel_handle_transmit(struct uart_port *port, unsigned int pending)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+
|
|
+ if (atmel_use_dma_tx(port)) {
|
|
+ /* PDC transmit */
|
|
+ if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
|
|
+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
|
|
+ tasklet_schedule(&atmel_port->tasklet);
|
|
+ }
|
|
+ } else {
|
|
+ /* Interrupt transmit */
|
|
+ if (pending & ATMEL_US_TXRDY) {
|
|
+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
|
|
+ tasklet_schedule(&atmel_port->tasklet);
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+/*
|
|
+ * status flags interrupt handler.
|
|
+ */
|
|
+static void
|
|
+atmel_handle_status(struct uart_port *port, unsigned int pending,
|
|
+ unsigned int status)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+
|
|
+ if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
|
|
+ | ATMEL_US_CTSIC)) {
|
|
+ atmel_port->irq_status = status;
|
|
+ tasklet_schedule(&atmel_port->tasklet);
|
|
+ }
|
|
}
|
|
|
|
/*
|
|
@@ -355,47 +537,255 @@ static void atmel_tx_chars(struct uart_port *port)
|
|
static irqreturn_t atmel_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *port = dev_id;
|
|
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
unsigned int status, pending, pass_counter = 0;
|
|
|
|
- status = UART_GET_CSR(port);
|
|
- pending = status & UART_GET_IMR(port);
|
|
- while (pending) {
|
|
- /* Interrupt receive */
|
|
- if (pending & ATMEL_US_RXRDY)
|
|
- atmel_rx_chars(port);
|
|
- else if (pending & ATMEL_US_RXBRK) {
|
|
+ do {
|
|
+ status = UART_GET_CSR(port);
|
|
+ pending = status & UART_GET_IMR(port);
|
|
+ if (!pending)
|
|
+ break;
|
|
+
|
|
+ atmel_handle_receive(port, pending);
|
|
+ atmel_handle_status(port, pending, status);
|
|
+ atmel_handle_transmit(port, pending);
|
|
+ } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
|
|
+ */
|
|
+static void atmel_tx_dma(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ struct circ_buf *xmit = &port->info->xmit;
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
|
|
+ int count;
|
|
+
|
|
+ xmit->tail += pdc->ofs;
|
|
+ xmit->tail &= UART_XMIT_SIZE - 1;
|
|
+
|
|
+ port->icount.tx += pdc->ofs;
|
|
+ pdc->ofs = 0;
|
|
+
|
|
+ if (!uart_circ_empty(xmit)) {
|
|
+ /* more to transmit - setup next transfer */
|
|
+
|
|
+ /* disable PDC transmit */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
|
|
+ dma_sync_single_for_device(port->dev,
|
|
+ pdc->dma_addr,
|
|
+ pdc->dma_size,
|
|
+ DMA_TO_DEVICE);
|
|
+
|
|
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
|
|
+ pdc->ofs = count;
|
|
+
|
|
+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
|
|
+ UART_PUT_TCR(port, count);
|
|
+ /* re-enable PDC transmit and interrupts */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
|
|
+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
|
|
+ } else {
|
|
+ /* nothing left to transmit - disable the transmitter */
|
|
+
|
|
+ /* disable PDC transmit */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
|
|
+ }
|
|
+
|
|
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
+ uart_write_wakeup(port);
|
|
+}
|
|
+
|
|
+static void atmel_rx_from_ring(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ struct circ_buf *ring = &atmel_port->rx_ring;
|
|
+ unsigned int flg;
|
|
+ unsigned int status;
|
|
+
|
|
+ while (ring->head != ring->tail) {
|
|
+ struct atmel_uart_char c;
|
|
+
|
|
+ /* Make sure c is loaded after head. */
|
|
+ smp_rmb();
|
|
+
|
|
+ c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
|
|
+
|
|
+ ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
|
|
+
|
|
+ port->icount.rx++;
|
|
+ status = c.status;
|
|
+ flg = TTY_NORMAL;
|
|
+
|
|
+ /*
|
|
+ * note that the error handling code is
|
|
+ * out of the main execution path
|
|
+ */
|
|
+ if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
|
|
+ | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
|
|
+ if (status & ATMEL_US_RXBRK) {
|
|
+ /* ignore side-effect */
|
|
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
|
|
+
|
|
+ port->icount.brk++;
|
|
+ if (uart_handle_break(port))
|
|
+ continue;
|
|
+ }
|
|
+ if (status & ATMEL_US_PARE)
|
|
+ port->icount.parity++;
|
|
+ if (status & ATMEL_US_FRAME)
|
|
+ port->icount.frame++;
|
|
+ if (status & ATMEL_US_OVRE)
|
|
+ port->icount.overrun++;
|
|
+
|
|
+ status &= port->read_status_mask;
|
|
+
|
|
+ if (status & ATMEL_US_RXBRK)
|
|
+ flg = TTY_BREAK;
|
|
+ else if (status & ATMEL_US_PARE)
|
|
+ flg = TTY_PARITY;
|
|
+ else if (status & ATMEL_US_FRAME)
|
|
+ flg = TTY_FRAME;
|
|
+ }
|
|
+
|
|
+
|
|
+ if (uart_handle_sysrq_char(port, c.ch))
|
|
+ continue;
|
|
+
|
|
+ uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Drop the lock here since it might end up calling
|
|
+ * uart_start(), which takes the lock.
|
|
+ */
|
|
+ spin_unlock(&port->lock);
|
|
+ tty_flip_buffer_push(port->info->tty);
|
|
+ spin_lock(&port->lock);
|
|
+}
|
|
+
|
|
+static void atmel_rx_from_dma(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ struct tty_struct *tty = port->info->tty;
|
|
+ struct atmel_dma_buffer *pdc;
|
|
+ int rx_idx = atmel_port->pdc_rx_idx;
|
|
+ unsigned int head;
|
|
+ unsigned int tail;
|
|
+ unsigned int count;
|
|
+
|
|
+ do {
|
|
+ /* Reset the UART timeout early so that we don't miss one */
|
|
+ UART_PUT_CR(port, ATMEL_US_STTTO);
|
|
+
|
|
+ pdc = &atmel_port->pdc_rx[rx_idx];
|
|
+ head = UART_GET_RPR(port) - pdc->dma_addr;
|
|
+ tail = pdc->ofs;
|
|
+
|
|
+ /* If the PDC has switched buffers, RPR won't contain
|
|
+ * any address within the current buffer. Since head
|
|
+ * is unsigned, we just need a one-way comparison to
|
|
+ * find out.
|
|
+ *
|
|
+ * In this case, we just need to consume the entire
|
|
+ * buffer and resubmit it for DMA. This will clear the
|
|
+ * ENDRX bit as well, so that we can safely re-enable
|
|
+ * all interrupts below.
|
|
+ */
|
|
+ head = min(head, pdc->dma_size);
|
|
+
|
|
+ if (likely(head != tail)) {
|
|
+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
|
|
+ pdc->dma_size, DMA_FROM_DEVICE);
|
|
+
|
|
/*
|
|
- * End of break detected. If it came along
|
|
- * with a character, atmel_rx_chars will
|
|
- * handle it.
|
|
+ * head will only wrap around when we recycle
|
|
+ * the DMA buffer, and when that happens, we
|
|
+ * explicitly set tail to 0. So head will
|
|
+ * always be greater than tail.
|
|
*/
|
|
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
|
|
- UART_PUT_IDR(port, ATMEL_US_RXBRK);
|
|
- atmel_port->break_active = 0;
|
|
+ count = head - tail;
|
|
+
|
|
+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
|
|
+
|
|
+ dma_sync_single_for_device(port->dev, pdc->dma_addr,
|
|
+ pdc->dma_size, DMA_FROM_DEVICE);
|
|
+
|
|
+ port->icount.rx += count;
|
|
+ pdc->ofs = head;
|
|
}
|
|
|
|
- // TODO: All reads to CSR will clear these interrupts!
|
|
- if (pending & ATMEL_US_RIIC) port->icount.rng++;
|
|
- if (pending & ATMEL_US_DSRIC) port->icount.dsr++;
|
|
- if (pending & ATMEL_US_DCDIC)
|
|
+ /*
|
|
+ * If the current buffer is full, we need to check if
|
|
+ * the next one contains any additional data.
|
|
+ */
|
|
+ if (head >= pdc->dma_size) {
|
|
+ pdc->ofs = 0;
|
|
+ UART_PUT_RNPR(port, pdc->dma_addr);
|
|
+ UART_PUT_RNCR(port, pdc->dma_size);
|
|
+
|
|
+ rx_idx = !rx_idx;
|
|
+ atmel_port->pdc_rx_idx = rx_idx;
|
|
+ }
|
|
+ } while (head >= pdc->dma_size);
|
|
+
|
|
+ /*
|
|
+ * Drop the lock here since it might end up calling
|
|
+ * uart_start(), which takes the lock.
|
|
+ */
|
|
+ spin_unlock(&port->lock);
|
|
+ tty_flip_buffer_push(tty);
|
|
+ spin_lock(&port->lock);
|
|
+
|
|
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * tasklet handling tty stuff outside the interrupt handler.
|
|
+ */
|
|
+static void atmel_tasklet_func(unsigned long data)
|
|
+{
|
|
+ struct uart_port *port = (struct uart_port *)data;
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ unsigned int status;
|
|
+ unsigned int status_change;
|
|
+
|
|
+ /* The interrupt handler does not take the lock */
|
|
+ spin_lock(&port->lock);
|
|
+
|
|
+ if (atmel_use_dma_tx(port))
|
|
+ atmel_tx_dma(port);
|
|
+ else
|
|
+ atmel_tx_chars(port);
|
|
+
|
|
+ status = atmel_port->irq_status;
|
|
+ status_change = status ^ atmel_port->irq_status_prev;
|
|
+
|
|
+ if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
|
|
+ | ATMEL_US_DCD | ATMEL_US_CTS)) {
|
|
+ /* TODO: All reads to CSR will clear these interrupts! */
|
|
+ if (status_change & ATMEL_US_RI)
|
|
+ port->icount.rng++;
|
|
+ if (status_change & ATMEL_US_DSR)
|
|
+ port->icount.dsr++;
|
|
+ if (status_change & ATMEL_US_DCD)
|
|
uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
|
|
- if (pending & ATMEL_US_CTSIC)
|
|
+ if (status_change & ATMEL_US_CTS)
|
|
uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
|
|
- if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
|
|
- wake_up_interruptible(&port->info->delta_msr_wait);
|
|
|
|
- /* Interrupt transmit */
|
|
- if (pending & ATMEL_US_TXRDY)
|
|
- atmel_tx_chars(port);
|
|
+ wake_up_interruptible(&port->info->delta_msr_wait);
|
|
|
|
- if (pass_counter++ > ATMEL_ISR_PASS_LIMIT)
|
|
- break;
|
|
-
|
|
- status = UART_GET_CSR(port);
|
|
- pending = status & UART_GET_IMR(port);
|
|
+ atmel_port->irq_status_prev = status;
|
|
}
|
|
- return IRQ_HANDLED;
|
|
+
|
|
+ if (atmel_use_dma_rx(port))
|
|
+ atmel_rx_from_dma(port);
|
|
+ else
|
|
+ atmel_rx_from_ring(port);
|
|
+
|
|
+ spin_unlock(&port->lock);
|
|
}
|
|
|
|
/*
|
|
@@ -403,6 +793,8 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
|
|
*/
|
|
static int atmel_startup(struct uart_port *port)
|
|
{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ struct tty_struct *tty = port->info->tty;
|
|
int retval;
|
|
|
|
/*
|
|
@@ -415,13 +807,64 @@ static int atmel_startup(struct uart_port *port)
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
- retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, "atmel_serial", port);
|
|
+ retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
|
|
+ tty ? tty->name : "atmel_serial", port);
|
|
if (retval) {
|
|
printk("atmel_serial: atmel_startup - Can't get irq\n");
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
+ * Initialize DMA (if necessary)
|
|
+ */
|
|
+ if (atmel_use_dma_rx(port)) {
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < 2; i++) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
|
|
+
|
|
+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
|
|
+ if (pdc->buf == NULL) {
|
|
+ if (i != 0) {
|
|
+ dma_unmap_single(port->dev,
|
|
+ atmel_port->pdc_rx[0].dma_addr,
|
|
+ PDC_BUFFER_SIZE,
|
|
+ DMA_FROM_DEVICE);
|
|
+ kfree(atmel_port->pdc_rx[0].buf);
|
|
+ }
|
|
+ free_irq(port->irq, port);
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ pdc->dma_addr = dma_map_single(port->dev,
|
|
+ pdc->buf,
|
|
+ PDC_BUFFER_SIZE,
|
|
+ DMA_FROM_DEVICE);
|
|
+ pdc->dma_size = PDC_BUFFER_SIZE;
|
|
+ pdc->ofs = 0;
|
|
+ }
|
|
+
|
|
+ atmel_port->pdc_rx_idx = 0;
|
|
+
|
|
+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
|
|
+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
|
|
+
|
|
+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
|
|
+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
|
|
+ }
|
|
+ if (atmel_use_dma_tx(port)) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
|
|
+ struct circ_buf *xmit = &port->info->xmit;
|
|
+
|
|
+ pdc->buf = xmit->buf;
|
|
+ pdc->dma_addr = dma_map_single(port->dev,
|
|
+ pdc->buf,
|
|
+ UART_XMIT_SIZE,
|
|
+ DMA_TO_DEVICE);
|
|
+ pdc->dma_size = UART_XMIT_SIZE;
|
|
+ pdc->ofs = 0;
|
|
+ }
|
|
+
|
|
+ /*
|
|
* If there is a specific "open" function (to register
|
|
* control line interrupts)
|
|
*/
|
|
@@ -437,9 +880,21 @@ static int atmel_startup(struct uart_port *port)
|
|
* Finally, enable the serial port
|
|
*/
|
|
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
|
|
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
|
|
+ /* enable xmit & rcvr */
|
|
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
|
|
|
|
- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
|
|
+ if (atmel_use_dma_rx(port)) {
|
|
+ /* set UART timeout */
|
|
+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
|
|
+ UART_PUT_CR(port, ATMEL_US_STTTO);
|
|
+
|
|
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
|
|
+ /* enable PDC controller */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
|
|
+ } else {
|
|
+ /* enable receive only */
|
|
+ UART_PUT_IER(port, ATMEL_US_RXRDY);
|
|
+ }
|
|
|
|
return 0;
|
|
}
|
|
@@ -449,6 +904,38 @@ static int atmel_startup(struct uart_port *port)
|
|
*/
|
|
static void atmel_shutdown(struct uart_port *port)
|
|
{
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
+ /*
|
|
+ * Ensure everything is stopped.
|
|
+ */
|
|
+ atmel_stop_rx(port);
|
|
+ atmel_stop_tx(port);
|
|
+
|
|
+ /*
|
|
+ * Shut-down the DMA.
|
|
+ */
|
|
+ if (atmel_use_dma_rx(port)) {
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < 2; i++) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
|
|
+
|
|
+ dma_unmap_single(port->dev,
|
|
+ pdc->dma_addr,
|
|
+ pdc->dma_size,
|
|
+ DMA_FROM_DEVICE);
|
|
+ kfree(pdc->buf);
|
|
+ }
|
|
+ }
|
|
+ if (atmel_use_dma_tx(port)) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
|
|
+
|
|
+ dma_unmap_single(port->dev,
|
|
+ pdc->dma_addr,
|
|
+ pdc->dma_size,
|
|
+ DMA_TO_DEVICE);
|
|
+ }
|
|
+
|
|
/*
|
|
* Disable all interrupts, port and break condition.
|
|
*/
|
|
@@ -471,45 +958,48 @@ static void atmel_shutdown(struct uart_port *port)
|
|
/*
|
|
* Power / Clock management.
|
|
*/
|
|
-static void atmel_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
|
|
+static void atmel_serial_pm(struct uart_port *port, unsigned int state,
|
|
+ unsigned int oldstate)
|
|
{
|
|
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
|
|
switch (state) {
|
|
- case 0:
|
|
- /*
|
|
- * Enable the peripheral clock for this serial port.
|
|
- * This is called on uart_open() or a resume event.
|
|
- */
|
|
- clk_enable(atmel_port->clk);
|
|
- break;
|
|
- case 3:
|
|
- /*
|
|
- * Disable the peripheral clock for this serial port.
|
|
- * This is called on uart_close() or a suspend event.
|
|
- */
|
|
- clk_disable(atmel_port->clk);
|
|
- break;
|
|
- default:
|
|
- printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
|
|
+ case 0:
|
|
+ /*
|
|
+ * Enable the peripheral clock for this serial port.
|
|
+ * This is called on uart_open() or a resume event.
|
|
+ */
|
|
+ clk_enable(atmel_port->clk);
|
|
+ break;
|
|
+ case 3:
|
|
+ /*
|
|
+ * Disable the peripheral clock for this serial port.
|
|
+ * This is called on uart_close() or a suspend event.
|
|
+ */
|
|
+ clk_disable(atmel_port->clk);
|
|
+ break;
|
|
+ default:
|
|
+ printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Change the port parameters
|
|
*/
|
|
-static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
|
|
+static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
+ struct ktermios *old)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int mode, imr, quot, baud;
|
|
|
|
/* Get current mode register */
|
|
- mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
|
|
+ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
|
|
+ | ATMEL_US_NBSTOP | ATMEL_US_PAR);
|
|
|
|
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
|
|
+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
|
|
quot /= 8;
|
|
mode |= ATMEL_US_USCLKS_MCK_DIV8;
|
|
}
|
|
@@ -536,18 +1026,17 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
|
|
|
|
/* parity */
|
|
if (termios->c_cflag & PARENB) {
|
|
- if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
|
|
+ /* Mark or Space parity */
|
|
+ if (termios->c_cflag & CMSPAR) {
|
|
if (termios->c_cflag & PARODD)
|
|
mode |= ATMEL_US_PAR_MARK;
|
|
else
|
|
mode |= ATMEL_US_PAR_SPACE;
|
|
- }
|
|
- else if (termios->c_cflag & PARODD)
|
|
+ } else if (termios->c_cflag & PARODD)
|
|
mode |= ATMEL_US_PAR_ODD;
|
|
else
|
|
mode |= ATMEL_US_PAR_EVEN;
|
|
- }
|
|
- else
|
|
+ } else
|
|
mode |= ATMEL_US_PAR_NONE;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
@@ -558,6 +1047,10 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
port->read_status_mask |= ATMEL_US_RXBRK;
|
|
|
|
+ if (atmel_use_dma_rx(port))
|
|
+ /* need to enable error interrupts */
|
|
+ UART_PUT_IER(port, port->read_status_mask);
|
|
+
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
@@ -573,16 +1066,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios,
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |= ATMEL_US_OVRE;
|
|
}
|
|
-
|
|
- // TODO: Ignore all characters if CREAD is set.
|
|
+ /* TODO: Ignore all characters if CREAD is set.*/
|
|
|
|
/* update the per-port timeout */
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
- /* disable interrupts and drain transmitter */
|
|
- imr = UART_GET_IMR(port); /* get interrupt mask */
|
|
- UART_PUT_IDR(port, -1); /* disable all interrupts */
|
|
- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
|
|
+ /* save/disable interrupts and drain transmitter */
|
|
+ imr = UART_GET_IMR(port);
|
|
+ UART_PUT_IDR(port, -1);
|
|
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
|
|
+ cpu_relax();
|
|
|
|
/* disable receiver and transmitter */
|
|
UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
|
|
@@ -708,7 +1201,8 @@ static struct uart_ops atmel_pops = {
|
|
/*
|
|
* Configure the port from the platform device resource info.
|
|
*/
|
|
-static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct platform_device *pdev)
|
|
+static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
|
|
+ struct platform_device *pdev)
|
|
{
|
|
struct uart_port *port = &atmel_port->uart;
|
|
struct atmel_uart_data *data = pdev->dev.platform_data;
|
|
@@ -723,6 +1217,11 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
|
|
port->mapbase = pdev->resource[0].start;
|
|
port->irq = pdev->resource[1].start;
|
|
|
|
+ tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
|
|
+ (unsigned long)port);
|
|
+
|
|
+ memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
|
|
+
|
|
if (data->regs)
|
|
/* Already mapped by setup code */
|
|
port->membase = data->regs;
|
|
@@ -731,11 +1230,17 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct
|
|
port->membase = NULL;
|
|
}
|
|
|
|
- if (!atmel_port->clk) { /* for console, the clock could already be configured */
|
|
+ /* for console, the clock could already be configured */
|
|
+ if (!atmel_port->clk) {
|
|
atmel_port->clk = clk_get(&pdev->dev, "usart");
|
|
clk_enable(atmel_port->clk);
|
|
port->uartclk = clk_get_rate(atmel_port->clk);
|
|
}
|
|
+
|
|
+ atmel_port->use_dma_rx = data->use_dma_rx;
|
|
+ atmel_port->use_dma_tx = data->use_dma_tx;
|
|
+ if (atmel_use_dma_tx(port))
|
|
+ port->fifosize = PDC_BUFFER_SIZE;
|
|
}
|
|
|
|
/*
|
|
@@ -755,12 +1260,11 @@ void __init atmel_register_uart_fns(struct atmel_port_fns *fns)
|
|
atmel_pops.set_wake = fns->set_wake;
|
|
}
|
|
|
|
-
|
|
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
|
|
static void atmel_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
|
|
- barrier();
|
|
+ cpu_relax();
|
|
UART_PUT_CHAR(port, ch);
|
|
}
|
|
|
|
@@ -773,38 +1277,40 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
|
|
unsigned int status, imr;
|
|
|
|
/*
|
|
- * First, save IMR and then disable interrupts
|
|
+ * First, save IMR and then disable interrupts
|
|
*/
|
|
- imr = UART_GET_IMR(port); /* get interrupt mask */
|
|
+ imr = UART_GET_IMR(port);
|
|
UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
|
|
|
|
uart_console_write(port, s, count, atmel_console_putchar);
|
|
|
|
/*
|
|
- * Finally, wait for transmitter to become empty
|
|
- * and restore IMR
|
|
+ * Finally, wait for transmitter to become empty
|
|
+ * and restore IMR
|
|
*/
|
|
do {
|
|
status = UART_GET_CSR(port);
|
|
} while (!(status & ATMEL_US_TXRDY));
|
|
- UART_PUT_IER(port, imr); /* set interrupts back the way they were */
|
|
+ /* set interrupts back the way they were */
|
|
+ UART_PUT_IER(port, imr);
|
|
}
|
|
|
|
/*
|
|
- * If the port was already initialised (eg, by a boot loader), try to determine
|
|
- * the current setup.
|
|
+ * If the port was already initialised (eg, by a boot loader),
|
|
+ * try to determine the current setup.
|
|
*/
|
|
-static void __init atmel_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
|
|
+static void __init atmel_console_get_options(struct uart_port *port, int *baud,
|
|
+ int *parity, int *bits)
|
|
{
|
|
unsigned int mr, quot;
|
|
|
|
-// TODO: CR is a write-only register
|
|
-// unsigned int cr;
|
|
-//
|
|
-// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
|
|
-// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
|
|
-// /* ok, the port was enabled */
|
|
-// }
|
|
+ /*
|
|
+ * If the baud rate generator isn't running, the port wasn't
|
|
+ * initialized by the boot loader.
|
|
+ */
|
|
+ quot = UART_GET_BRGR(port);
|
|
+ if (!quot)
|
|
+ return;
|
|
|
|
mr = UART_GET_MR(port) & ATMEL_US_CHRL;
|
|
if (mr == ATMEL_US_CHRL_8)
|
|
@@ -824,7 +1330,6 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
|
|
* lower than one of those, as it would make us fall through
|
|
* to a much lower baud rate than we really want.
|
|
*/
|
|
- quot = UART_GET_BRGR(port);
|
|
*baud = port->uartclk / (16 * (quot - 1));
|
|
}
|
|
|
|
@@ -836,10 +1341,12 @@ static int __init atmel_console_setup(struct console *co, char *options)
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
- if (port->membase == 0) /* Port not initialized yet - delay setup */
|
|
+ if (port->membase == NULL) {
|
|
+ /* Port not initialized yet - delay setup */
|
|
return -ENODEV;
|
|
+ }
|
|
|
|
- UART_PUT_IDR(port, -1); /* disable interrupts */
|
|
+ UART_PUT_IDR(port, -1);
|
|
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
|
|
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
|
|
|
|
@@ -871,13 +1378,16 @@ static struct console atmel_console = {
|
|
static int __init atmel_console_init(void)
|
|
{
|
|
if (atmel_default_console_device) {
|
|
- add_preferred_console(ATMEL_DEVICENAME, atmel_default_console_device->id, NULL);
|
|
- atmel_init_port(&(atmel_ports[atmel_default_console_device->id]), atmel_default_console_device);
|
|
+ add_preferred_console(ATMEL_DEVICENAME,
|
|
+ atmel_default_console_device->id, NULL);
|
|
+ atmel_init_port(&atmel_ports[atmel_default_console_device->id],
|
|
+ atmel_default_console_device);
|
|
register_console(&atmel_console);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
+
|
|
console_initcall(atmel_console_init);
|
|
|
|
/*
|
|
@@ -885,34 +1395,48 @@ console_initcall(atmel_console_init);
|
|
*/
|
|
static int __init atmel_late_console_init(void)
|
|
{
|
|
- if (atmel_default_console_device && !(atmel_console.flags & CON_ENABLED))
|
|
+ if (atmel_default_console_device
|
|
+ && !(atmel_console.flags & CON_ENABLED))
|
|
register_console(&atmel_console);
|
|
|
|
return 0;
|
|
}
|
|
+
|
|
core_initcall(atmel_late_console_init);
|
|
|
|
+static inline bool atmel_is_console_port(struct uart_port *port)
|
|
+{
|
|
+ return port->cons && port->cons->index == port->line;
|
|
+}
|
|
+
|
|
#else
|
|
#define ATMEL_CONSOLE_DEVICE NULL
|
|
+
|
|
+static inline bool atmel_is_console_port(struct uart_port *port)
|
|
+{
|
|
+ return false;
|
|
+}
|
|
#endif
|
|
|
|
static struct uart_driver atmel_uart = {
|
|
- .owner = THIS_MODULE,
|
|
- .driver_name = "atmel_serial",
|
|
- .dev_name = ATMEL_DEVICENAME,
|
|
- .major = SERIAL_ATMEL_MAJOR,
|
|
- .minor = MINOR_START,
|
|
- .nr = ATMEL_MAX_UART,
|
|
- .cons = ATMEL_CONSOLE_DEVICE,
|
|
+ .owner = THIS_MODULE,
|
|
+ .driver_name = "atmel_serial",
|
|
+ .dev_name = ATMEL_DEVICENAME,
|
|
+ .major = SERIAL_ATMEL_MAJOR,
|
|
+ .minor = MINOR_START,
|
|
+ .nr = ATMEL_MAX_UART,
|
|
+ .cons = ATMEL_CONSOLE_DEVICE,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
-static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state)
|
|
+static int atmel_serial_suspend(struct platform_device *pdev,
|
|
+ pm_message_t state)
|
|
{
|
|
struct uart_port *port = platform_get_drvdata(pdev);
|
|
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
|
|
- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
|
|
+ if (device_may_wakeup(&pdev->dev)
|
|
+ && !at91_suspend_entering_slow_clock())
|
|
enable_irq_wake(port->irq);
|
|
else {
|
|
uart_suspend_port(&atmel_uart, port);
|
|
@@ -925,13 +1449,12 @@ static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state
|
|
static int atmel_serial_resume(struct platform_device *pdev)
|
|
{
|
|
struct uart_port *port = platform_get_drvdata(pdev);
|
|
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
|
|
if (atmel_port->suspended) {
|
|
uart_resume_port(&atmel_uart, port);
|
|
atmel_port->suspended = 0;
|
|
- }
|
|
- else
|
|
+ } else
|
|
disable_irq_wake(port->irq);
|
|
|
|
return 0;
|
|
@@ -944,15 +1467,40 @@ static int atmel_serial_resume(struct platform_device *pdev)
|
|
static int __devinit atmel_serial_probe(struct platform_device *pdev)
|
|
{
|
|
struct atmel_uart_port *port;
|
|
+ void *data;
|
|
int ret;
|
|
|
|
+ BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
|
|
+
|
|
port = &atmel_ports[pdev->id];
|
|
atmel_init_port(port, pdev);
|
|
|
|
+ if (!atmel_use_dma_rx(&port->uart)) {
|
|
+ ret = -ENOMEM;
|
|
+ data = kmalloc(sizeof(struct atmel_uart_char)
|
|
+ * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
|
|
+ if (!data)
|
|
+ goto err_alloc_ring;
|
|
+ port->rx_ring.buf = data;
|
|
+ }
|
|
+
|
|
ret = uart_add_one_port(&atmel_uart, &port->uart);
|
|
- if (!ret) {
|
|
- device_init_wakeup(&pdev->dev, 1);
|
|
- platform_set_drvdata(pdev, port);
|
|
+ if (ret)
|
|
+ goto err_add_port;
|
|
+
|
|
+ device_init_wakeup(&pdev->dev, 1);
|
|
+ platform_set_drvdata(pdev, port);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_add_port:
|
|
+ kfree(port->rx_ring.buf);
|
|
+ port->rx_ring.buf = NULL;
|
|
+err_alloc_ring:
|
|
+ if (!atmel_is_console_port(&port->uart)) {
|
|
+ clk_disable(port->clk);
|
|
+ clk_put(port->clk);
|
|
+ port->clk = NULL;
|
|
}
|
|
|
|
return ret;
|
|
@@ -961,19 +1509,21 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
|
|
static int __devexit atmel_serial_remove(struct platform_device *pdev)
|
|
{
|
|
struct uart_port *port = platform_get_drvdata(pdev);
|
|
- struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
|
|
int ret = 0;
|
|
|
|
- clk_disable(atmel_port->clk);
|
|
- clk_put(atmel_port->clk);
|
|
-
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
- if (port) {
|
|
- ret = uart_remove_one_port(&atmel_uart, port);
|
|
- kfree(port);
|
|
- }
|
|
+ ret = uart_remove_one_port(&atmel_uart, port);
|
|
+
|
|
+ tasklet_kill(&atmel_port->tasklet);
|
|
+ kfree(atmel_port->rx_ring.buf);
|
|
+
|
|
+ /* "port" is allocated statically, so we shouldn't free it */
|
|
+
|
|
+ clk_disable(atmel_port->clk);
|
|
+ clk_put(atmel_port->clk);
|
|
|
|
return ret;
|
|
}
|
|
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
|
|
index ff10808..293b7ca 100644
|
|
--- a/drivers/spi/atmel_spi.c
|
|
+++ b/drivers/spi/atmel_spi.c
|
|
@@ -51,7 +51,9 @@ struct atmel_spi {
|
|
u8 stopping;
|
|
struct list_head queue;
|
|
struct spi_transfer *current_transfer;
|
|
- unsigned long remaining_bytes;
|
|
+ unsigned long current_remaining_bytes;
|
|
+ struct spi_transfer *next_transfer;
|
|
+ unsigned long next_remaining_bytes;
|
|
|
|
void *buffer;
|
|
dma_addr_t buffer_dma;
|
|
@@ -121,6 +123,48 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
|
|
gpio_set_value(gpio, !active);
|
|
}
|
|
|
|
+static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
|
|
+ struct spi_transfer *xfer)
|
|
+{
|
|
+ return msg->transfers.prev == &xfer->transfer_list;
|
|
+}
|
|
+
|
|
+static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
|
|
+{
|
|
+ return xfer->delay_usecs == 0 && !xfer->cs_change;
|
|
+}
|
|
+
|
|
+static void atmel_spi_next_xfer_data(struct spi_master *master,
|
|
+ struct spi_transfer *xfer,
|
|
+ dma_addr_t *tx_dma,
|
|
+ dma_addr_t *rx_dma,
|
|
+ u32 *plen)
|
|
+{
|
|
+ struct atmel_spi *as = spi_master_get_devdata(master);
|
|
+ u32 len = *plen;
|
|
+
|
|
+ /* use scratch buffer only when rx or tx data is unspecified */
|
|
+ if (xfer->rx_buf)
|
|
+ *rx_dma = xfer->rx_dma + xfer->len - len;
|
|
+ else {
|
|
+ *rx_dma = as->buffer_dma;
|
|
+ if (len > BUFFER_SIZE)
|
|
+ len = BUFFER_SIZE;
|
|
+ }
|
|
+ if (xfer->tx_buf)
|
|
+ *tx_dma = xfer->tx_dma + xfer->len - len;
|
|
+ else {
|
|
+ *tx_dma = as->buffer_dma;
|
|
+ if (len > BUFFER_SIZE)
|
|
+ len = BUFFER_SIZE;
|
|
+ memset(as->buffer, 0, len);
|
|
+ dma_sync_single_for_device(&as->pdev->dev,
|
|
+ as->buffer_dma, len, DMA_TO_DEVICE);
|
|
+ }
|
|
+
|
|
+ *plen = len;
|
|
+}
|
|
+
|
|
/*
|
|
* Submit next transfer for DMA.
|
|
* lock is held, spi irq is blocked
|
|
@@ -130,53 +174,78 @@ static void atmel_spi_next_xfer(struct spi_master *master,
|
|
{
|
|
struct atmel_spi *as = spi_master_get_devdata(master);
|
|
struct spi_transfer *xfer;
|
|
- u32 len;
|
|
+ u32 len, remaining, total;
|
|
dma_addr_t tx_dma, rx_dma;
|
|
|
|
- xfer = as->current_transfer;
|
|
- if (!xfer || as->remaining_bytes == 0) {
|
|
- if (xfer)
|
|
- xfer = list_entry(xfer->transfer_list.next,
|
|
- struct spi_transfer, transfer_list);
|
|
- else
|
|
- xfer = list_entry(msg->transfers.next,
|
|
- struct spi_transfer, transfer_list);
|
|
- as->remaining_bytes = xfer->len;
|
|
- as->current_transfer = xfer;
|
|
- }
|
|
+ if (!as->current_transfer)
|
|
+ xfer = list_entry(msg->transfers.next,
|
|
+ struct spi_transfer, transfer_list);
|
|
+ else if (!as->next_transfer)
|
|
+ xfer = list_entry(as->current_transfer->transfer_list.next,
|
|
+ struct spi_transfer, transfer_list);
|
|
+ else
|
|
+ xfer = NULL;
|
|
|
|
- len = as->remaining_bytes;
|
|
+ if (xfer) {
|
|
+ len = xfer->len;
|
|
+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
|
|
+ remaining = xfer->len - len;
|
|
|
|
- tx_dma = xfer->tx_dma + xfer->len - len;
|
|
- rx_dma = xfer->rx_dma + xfer->len - len;
|
|
+ spi_writel(as, RPR, rx_dma);
|
|
+ spi_writel(as, TPR, tx_dma);
|
|
|
|
- /* use scratch buffer only when rx or tx data is unspecified */
|
|
- if (!xfer->rx_buf) {
|
|
- rx_dma = as->buffer_dma;
|
|
- if (len > BUFFER_SIZE)
|
|
- len = BUFFER_SIZE;
|
|
- }
|
|
- if (!xfer->tx_buf) {
|
|
- tx_dma = as->buffer_dma;
|
|
- if (len > BUFFER_SIZE)
|
|
- len = BUFFER_SIZE;
|
|
- memset(as->buffer, 0, len);
|
|
- dma_sync_single_for_device(&as->pdev->dev,
|
|
- as->buffer_dma, len, DMA_TO_DEVICE);
|
|
+ if (msg->spi->bits_per_word > 8)
|
|
+ len >>= 1;
|
|
+ spi_writel(as, RCR, len);
|
|
+ spi_writel(as, TCR, len);
|
|
+
|
|
+ dev_dbg(&msg->spi->dev,
|
|
+ " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
|
|
+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
|
|
+ xfer->rx_buf, xfer->rx_dma);
|
|
+ } else {
|
|
+ xfer = as->next_transfer;
|
|
+ remaining = as->next_remaining_bytes;
|
|
}
|
|
|
|
- spi_writel(as, RPR, rx_dma);
|
|
- spi_writel(as, TPR, tx_dma);
|
|
+ as->current_transfer = xfer;
|
|
+ as->current_remaining_bytes = remaining;
|
|
|
|
- as->remaining_bytes -= len;
|
|
- if (msg->spi->bits_per_word > 8)
|
|
- len >>= 1;
|
|
+ if (remaining > 0)
|
|
+ len = remaining;
|
|
+ else if (!atmel_spi_xfer_is_last(msg, xfer)
|
|
+ && atmel_spi_xfer_can_be_chained(xfer)) {
|
|
+ xfer = list_entry(xfer->transfer_list.next,
|
|
+ struct spi_transfer, transfer_list);
|
|
+ len = xfer->len;
|
|
+ } else
|
|
+ xfer = NULL;
|
|
|
|
- /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
|
|
- * mechanism might help avoid the IRQ latency between transfers
|
|
- * (and improve the nCS0 errata handling on at91rm9200 chips)
|
|
- *
|
|
- * We're also waiting for ENDRX before we start the next
|
|
+ as->next_transfer = xfer;
|
|
+
|
|
+ if (xfer) {
|
|
+ total = len;
|
|
+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
|
|
+ as->next_remaining_bytes = total - len;
|
|
+
|
|
+ spi_writel(as, RNPR, rx_dma);
|
|
+ spi_writel(as, TNPR, tx_dma);
|
|
+
|
|
+ if (msg->spi->bits_per_word > 8)
|
|
+ len >>= 1;
|
|
+ spi_writel(as, RNCR, len);
|
|
+ spi_writel(as, TNCR, len);
|
|
+
|
|
+ dev_dbg(&msg->spi->dev,
|
|
+ " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
|
|
+ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
|
|
+ xfer->rx_buf, xfer->rx_dma);
|
|
+ } else {
|
|
+ spi_writel(as, RNCR, 0);
|
|
+ spi_writel(as, TNCR, 0);
|
|
+ }
|
|
+
|
|
+ /* REVISIT: We're waiting for ENDRX before we start the next
|
|
* transfer because we need to handle some difficult timing
|
|
* issues otherwise. If we wait for ENDTX in one transfer and
|
|
* then starts waiting for ENDRX in the next, it's difficult
|
|
@@ -186,17 +255,7 @@ static void atmel_spi_next_xfer(struct spi_master *master,
|
|
*
|
|
* It should be doable, though. Just not now...
|
|
*/
|
|
- spi_writel(as, TNCR, 0);
|
|
- spi_writel(as, RNCR, 0);
|
|
spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
|
|
-
|
|
- dev_dbg(&msg->spi->dev,
|
|
- " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
|
|
- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
|
|
- xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
|
|
-
|
|
- spi_writel(as, RCR, len);
|
|
- spi_writel(as, TCR, len);
|
|
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
|
|
}
|
|
|
|
@@ -294,6 +353,7 @@ atmel_spi_msg_done(struct spi_master *master, struct atmel_spi *as,
|
|
spin_lock(&as->lock);
|
|
|
|
as->current_transfer = NULL;
|
|
+ as->next_transfer = NULL;
|
|
|
|
/* continue if needed */
|
|
if (list_empty(&as->queue) || as->stopping)
|
|
@@ -377,7 +437,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
|
|
|
|
spi_writel(as, IDR, pending);
|
|
|
|
- if (as->remaining_bytes == 0) {
|
|
+ if (as->current_remaining_bytes == 0) {
|
|
msg->actual_length += xfer->len;
|
|
|
|
if (!msg->is_dma_mapped)
|
|
@@ -387,7 +447,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
|
|
if (xfer->delay_usecs)
|
|
udelay(xfer->delay_usecs);
|
|
|
|
- if (msg->transfers.prev == &xfer->transfer_list) {
|
|
+ if (atmel_spi_xfer_is_last(msg, xfer)) {
|
|
/* report completed message */
|
|
atmel_spi_msg_done(master, as, msg, 0,
|
|
xfer->cs_change);
|
|
@@ -490,9 +550,14 @@ static int atmel_spi_setup(struct spi_device *spi)
|
|
if (!(spi->mode & SPI_CPHA))
|
|
csr |= SPI_BIT(NCPHA);
|
|
|
|
- /* TODO: DLYBS and DLYBCT */
|
|
- csr |= SPI_BF(DLYBS, 10);
|
|
- csr |= SPI_BF(DLYBCT, 10);
|
|
+ /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
|
|
+ *
|
|
+ * DLYBCT would add delays between words, slowing down transfers.
|
|
+ * It could potentially be useful to cope with DMA bottlenecks, but
|
|
+ * in those cases it's probably best to just use a lower bitrate.
|
|
+ */
|
|
+ csr |= SPI_BF(DLYBS, 0);
|
|
+ csr |= SPI_BF(DLYBCT, 0);
|
|
|
|
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
|
|
npcs_pin = (unsigned int)spi->controller_data;
|
|
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
|
|
index 7c30cc8..5e99671 100644
|
|
--- a/drivers/video/atmel_lcdfb.c
|
|
+++ b/drivers/video/atmel_lcdfb.c
|
|
@@ -16,6 +16,7 @@
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
+#include <linux/backlight.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/cpu.h>
|
|
@@ -37,7 +38,9 @@
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_AT91)
|
|
-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
|
|
+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
|
|
+ | FBINFO_PARTIAL_PAN_OK \
|
|
+ | FBINFO_HWACCEL_YPAN)
|
|
|
|
static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
|
|
struct fb_var_screeninfo *var)
|
|
@@ -69,12 +72,113 @@ static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
|
|
}
|
|
#endif
|
|
|
|
+static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
|
|
+ | ATMEL_LCDC_POL_POSITIVE
|
|
+ | ATMEL_LCDC_ENA_PWMENABLE;
|
|
+
|
|
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
|
|
+
|
|
+/* some bl->props field just changed */
|
|
+static int atmel_bl_update_status(struct backlight_device *bl)
|
|
+{
|
|
+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
|
|
+ int power = sinfo->bl_power;
|
|
+ int brightness = bl->props.brightness;
|
|
+
|
|
+ /* REVISIT there may be a meaningful difference between
|
|
+ * fb_blank and power ... there seem to be some cases
|
|
+ * this doesn't handle correctly.
|
|
+ */
|
|
+ if (bl->props.fb_blank != sinfo->bl_power)
|
|
+ power = bl->props.fb_blank;
|
|
+ else if (bl->props.power != sinfo->bl_power)
|
|
+ power = bl->props.power;
|
|
+
|
|
+ if (brightness < 0 && power == FB_BLANK_UNBLANK)
|
|
+ brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
|
|
+ else if (power != FB_BLANK_UNBLANK)
|
|
+ brightness = 0;
|
|
+
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
|
|
+ brightness ? contrast_ctr : 0);
|
|
+
|
|
+ bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int atmel_bl_get_brightness(struct backlight_device *bl)
|
|
+{
|
|
+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
|
|
+
|
|
+ return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
|
|
+}
|
|
+
|
|
+static struct backlight_ops atmel_lcdc_bl_ops = {
|
|
+ .update_status = atmel_bl_update_status,
|
|
+ .get_brightness = atmel_bl_get_brightness,
|
|
+};
|
|
+
|
|
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ struct backlight_device *bl;
|
|
+
|
|
+ sinfo->bl_power = FB_BLANK_UNBLANK;
|
|
+
|
|
+ if (sinfo->backlight)
|
|
+ return;
|
|
+
|
|
+ bl = backlight_device_register("backlight", &sinfo->pdev->dev,
|
|
+ sinfo, &atmel_lcdc_bl_ops);
|
|
+ if (IS_ERR(sinfo->backlight)) {
|
|
+ dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
|
|
+ PTR_ERR(bl));
|
|
+ return;
|
|
+ }
|
|
+ sinfo->backlight = bl;
|
|
+
|
|
+ bl->props.power = FB_BLANK_UNBLANK;
|
|
+ bl->props.fb_blank = FB_BLANK_UNBLANK;
|
|
+ bl->props.max_brightness = 0xff;
|
|
+ bl->props.brightness = atmel_bl_get_brightness(bl);
|
|
+}
|
|
+
|
|
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ if (sinfo->backlight)
|
|
+ backlight_device_unregister(sinfo->backlight);
|
|
+}
|
|
+
|
|
+#else
|
|
+
|
|
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
|
|
+}
|
|
+
|
|
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+}
|
|
+
|
|
+#endif
|
|
+
|
|
+static void init_contrast(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ /* have some default contrast/backlight settings */
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
|
|
+
|
|
+ if (sinfo->lcdcon_is_backlight)
|
|
+ init_backlight(sinfo);
|
|
+}
|
|
+
|
|
|
|
static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.visual = FB_VISUAL_TRUECOLOR,
|
|
.xpanstep = 0,
|
|
- .ypanstep = 0,
|
|
+ .ypanstep = 1,
|
|
.ywrapstep = 0,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
@@ -148,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
+ memset(info->screen_base, 0, info->fix.smem_len);
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
@@ -203,6 +309,26 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
|
|
var->transp.offset = var->transp.length = 0;
|
|
var->xoffset = var->yoffset = 0;
|
|
|
|
+ /* Saturate vertical and horizontal timings at maximum values */
|
|
+ var->vsync_len = min_t(u32, var->vsync_len,
|
|
+ (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
|
|
+ var->upper_margin = min_t(u32, var->upper_margin,
|
|
+ ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
|
|
+ var->lower_margin = min_t(u32, var->lower_margin,
|
|
+ ATMEL_LCDC_VFP);
|
|
+ var->right_margin = min_t(u32, var->right_margin,
|
|
+ (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
|
|
+ var->hsync_len = min_t(u32, var->hsync_len,
|
|
+ (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
|
|
+ var->left_margin = min_t(u32, var->left_margin,
|
|
+ ATMEL_LCDC_HBP + 1);
|
|
+
|
|
+ /* Some parameters can't be zero */
|
|
+ var->vsync_len = max_t(u32, var->vsync_len, 1);
|
|
+ var->right_margin = max_t(u32, var->right_margin, 1);
|
|
+ var->hsync_len = max_t(u32, var->hsync_len, 1);
|
|
+ var->left_margin = max_t(u32, var->left_margin, 1);
|
|
+
|
|
switch (var->bits_per_pixel) {
|
|
case 1:
|
|
case 2:
|
|
@@ -370,10 +496,6 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
|
|
/* Disable all interrupts */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
|
|
|
|
- /* Set contrast */
|
|
- value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
|
|
- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
|
|
- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
|
|
/* ...wait for DMA engine to become idle... */
|
|
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
|
|
msleep(10);
|
|
@@ -516,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
|
|
struct fb_info *info = sinfo->info;
|
|
int ret = 0;
|
|
|
|
- memset_io(info->screen_base, 0, info->fix.smem_len);
|
|
info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
|
|
|
|
dev_info(info->device,
|
|
@@ -577,6 +698,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
|
|
sinfo->default_monspecs = pdata_sinfo->default_monspecs;
|
|
sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
|
|
sinfo->guard_time = pdata_sinfo->guard_time;
|
|
+ sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
|
|
} else {
|
|
dev_err(dev, "cannot get default configuration\n");
|
|
goto free_info;
|
|
@@ -645,6 +767,11 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
|
|
info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
|
|
if (!info->screen_base)
|
|
goto release_intmem;
|
|
+
|
|
+ /*
|
|
+ * Don't clear the framebuffer -- someone may have set
|
|
+ * up a splash image.
|
|
+ */
|
|
} else {
|
|
/* alocate memory buffer */
|
|
ret = atmel_lcdfb_alloc_video_memory(sinfo);
|
|
@@ -670,6 +797,9 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
|
|
goto release_mem;
|
|
}
|
|
|
|
+ /* Initialize PWM for contrast or backlight ("off") */
|
|
+ init_contrast(sinfo);
|
|
+
|
|
/* interrupt */
|
|
ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
|
|
if (ret) {
|
|
@@ -721,6 +851,7 @@ free_cmap:
|
|
unregister_irqs:
|
|
free_irq(sinfo->irq_base, info);
|
|
unmap_mmio:
|
|
+ exit_backlight(sinfo);
|
|
iounmap(sinfo->mmio);
|
|
release_mem:
|
|
release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
|
|
@@ -755,6 +886,7 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
|
|
if (!sinfo)
|
|
return 0;
|
|
|
|
+ exit_backlight(sinfo);
|
|
if (sinfo->atmel_lcdfb_power_control)
|
|
sinfo->atmel_lcdfb_power_control(0);
|
|
unregister_framebuffer(info);
|
|
@@ -781,6 +913,9 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
|
|
|
|
static struct platform_driver atmel_lcdfb_driver = {
|
|
.remove = __exit_p(atmel_lcdfb_remove),
|
|
+
|
|
+// FIXME need suspend, resume
|
|
+
|
|
.driver = {
|
|
.name = "atmel_lcdfb",
|
|
.owner = THIS_MODULE,
|
|
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
|
|
index 9609a6c..924e255 100644
|
|
--- a/drivers/video/backlight/Kconfig
|
|
+++ b/drivers/video/backlight/Kconfig
|
|
@@ -50,6 +50,19 @@ config BACKLIGHT_CLASS_DEVICE
|
|
To have support for your specific LCD panel you will have to
|
|
select the proper drivers which depend on this option.
|
|
|
|
+config BACKLIGHT_ATMEL_LCDC
|
|
+ bool "Atmel LCDC Contrast-as-Backlight control"
|
|
+ depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
|
|
+ default y if MACH_SAM9261EK || MACH_SAM9263EK
|
|
+ help
|
|
+ This provides a backlight control internal to the Atmel LCDC
|
|
+ driver. If the LCD "contrast control" on your board is wired
|
|
+ so it controls the backlight brightness, select this option to
|
|
+ export this as a PWM-based backlight control.
|
|
+
|
|
+ If in doubt, it's safe to enable this option; it doesn't kick
|
|
+ in unless the board's description says it's wired that way.
|
|
+
|
|
config BACKLIGHT_CORGI
|
|
tristate "Generic (aka Sharp Corgi) Backlight Driver"
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
|
|
index b87ed37..2b53d1f 100644
|
|
--- a/drivers/video/console/Kconfig
|
|
+++ b/drivers/video/console/Kconfig
|
|
@@ -6,7 +6,7 @@ menu "Console display driver support"
|
|
|
|
config VGA_CONSOLE
|
|
bool "VGA text console" if EMBEDDED || !X86
|
|
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
|
|
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
|
|
default y
|
|
help
|
|
Saying Y here will allow you to use Linux in text mode through a
|
|
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
|
|
index 52dff40..fbd6112 100644
|
|
--- a/drivers/watchdog/Kconfig
|
|
+++ b/drivers/watchdog/Kconfig
|
|
@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
|
|
|
|
config AT32AP700X_WDT
|
|
tristate "AT32AP700x watchdog"
|
|
- depends on CPU_AT32AP7000
|
|
+ depends on CPU_AT32AP700X
|
|
help
|
|
Watchdog timer embedded into AT32AP700x devices. This will reboot
|
|
your system when the timeout is reached.
|
|
diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h
|
|
deleted file mode 100644
|
|
index 3914d7b..0000000
|
|
--- a/include/asm-avr32/arch-at32ap/at32ap7000.h
|
|
+++ /dev/null
|
|
@@ -1,35 +0,0 @@
|
|
-/*
|
|
- * Pin definitions for AT32AP7000.
|
|
- *
|
|
- * Copyright (C) 2006 Atmel Corporation
|
|
- *
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
- * it under the terms of the GNU General Public License version 2 as
|
|
- * published by the Free Software Foundation.
|
|
- */
|
|
-#ifndef __ASM_ARCH_AT32AP7000_H__
|
|
-#define __ASM_ARCH_AT32AP7000_H__
|
|
-
|
|
-#define GPIO_PERIPH_A 0
|
|
-#define GPIO_PERIPH_B 1
|
|
-
|
|
-#define NR_GPIO_CONTROLLERS 4
|
|
-
|
|
-/*
|
|
- * Pin numbers identifying specific GPIO pins on the chip. They can
|
|
- * also be converted to IRQ numbers by passing them through
|
|
- * gpio_to_irq().
|
|
- */
|
|
-#define GPIO_PIOA_BASE (0)
|
|
-#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
|
|
-#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
|
|
-#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
|
|
-#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
|
|
-
|
|
-#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
|
|
-#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
|
|
-#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
|
|
-#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
|
|
-#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
|
|
-
|
|
-#endif /* __ASM_ARCH_AT32AP7000_H__ */
|
|
diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
|
|
new file mode 100644
|
|
index 0000000..99684d6
|
|
--- /dev/null
|
|
+++ b/include/asm-avr32/arch-at32ap/at32ap700x.h
|
|
@@ -0,0 +1,35 @@
|
|
+/*
|
|
+ * Pin definitions for AT32AP7000.
|
|
+ *
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#ifndef __ASM_ARCH_AT32AP700X_H__
|
|
+#define __ASM_ARCH_AT32AP700X_H__
|
|
+
|
|
+#define GPIO_PERIPH_A 0
|
|
+#define GPIO_PERIPH_B 1
|
|
+
|
|
+#define NR_GPIO_CONTROLLERS 4
|
|
+
|
|
+/*
|
|
+ * Pin numbers identifying specific GPIO pins on the chip. They can
|
|
+ * also be converted to IRQ numbers by passing them through
|
|
+ * gpio_to_irq().
|
|
+ */
|
|
+#define GPIO_PIOA_BASE (0)
|
|
+#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
|
|
+#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
|
|
+#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
|
|
+#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
|
|
+
|
|
+#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
|
|
+#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
|
|
+#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
|
|
+#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
|
|
+#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
|
|
+
|
|
+#endif /* __ASM_ARCH_AT32AP700X_H__ */
|
|
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
|
|
index d6993a6..8816b66 100644
|
|
--- a/include/asm-avr32/arch-at32ap/board.h
|
|
+++ b/include/asm-avr32/arch-at32ap/board.h
|
|
@@ -51,6 +51,9 @@ struct platform_device *
|
|
at32_add_device_ide(unsigned int id, unsigned int extint,
|
|
struct ide_platform_data *data);
|
|
|
|
+/* mask says which PWM channels to mux */
|
|
+struct platform_device *at32_add_device_pwm(u32 mask);
|
|
+
|
|
/* depending on what's hooked up, not all SSC pins will be used */
|
|
#define ATMEL_SSC_TK 0x01
|
|
#define ATMEL_SSC_TF 0x02
|
|
@@ -66,7 +69,13 @@ struct platform_device *
|
|
at32_add_device_ssc(unsigned int id, unsigned int flags);
|
|
|
|
struct platform_device *at32_add_device_twi(unsigned int id);
|
|
-struct platform_device *at32_add_device_mci(unsigned int id);
|
|
+
|
|
+struct mci_platform_data {
|
|
+ int detect_pin;
|
|
+ int wp_pin;
|
|
+};
|
|
+struct platform_device *
|
|
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
|
|
struct platform_device *at32_add_device_ac97c(unsigned int id);
|
|
struct platform_device *at32_add_device_abdac(unsigned int id);
|
|
|
|
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
|
|
index a762f42..0dc2026 100644
|
|
--- a/include/asm-avr32/arch-at32ap/cpu.h
|
|
+++ b/include/asm-avr32/arch-at32ap/cpu.h
|
|
@@ -14,7 +14,7 @@
|
|
* Only AT32AP7000 is defined for now. We can identify the specific
|
|
* chip at runtime, but I'm not sure if it's really worth it.
|
|
*/
|
|
-#ifdef CONFIG_CPU_AT32AP7000
|
|
+#ifdef CONFIG_CPU_AT32AP700X
|
|
# define cpu_is_at32ap7000() (1)
|
|
#else
|
|
# define cpu_is_at32ap7000() (0)
|
|
diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
|
|
index ee59e40..4ec6abc 100644
|
|
--- a/include/asm-avr32/arch-at32ap/io.h
|
|
+++ b/include/asm-avr32/arch-at32ap/io.h
|
|
@@ -4,7 +4,7 @@
|
|
/* For "bizarre" halfword swapping */
|
|
#include <linux/byteorder/swabb.h>
|
|
|
|
-#if defined(CONFIG_AP7000_32_BIT_SMC)
|
|
+#if defined(CONFIG_AP700X_32_BIT_SMC)
|
|
# define __swizzle_addr_b(addr) (addr ^ 3UL)
|
|
# define __swizzle_addr_w(addr) (addr ^ 2UL)
|
|
# define __swizzle_addr_l(addr) (addr)
|
|
@@ -14,7 +14,7 @@
|
|
# define __mem_ioswabb(a, x) (x)
|
|
# define __mem_ioswabw(a, x) swab16(x)
|
|
# define __mem_ioswabl(a, x) swab32(x)
|
|
-#elif defined(CONFIG_AP7000_16_BIT_SMC)
|
|
+#elif defined(CONFIG_AP700X_16_BIT_SMC)
|
|
# define __swizzle_addr_b(addr) (addr ^ 1UL)
|
|
# define __swizzle_addr_w(addr) (addr)
|
|
# define __swizzle_addr_l(addr) (addr)
|
|
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
|
|
index b1abe6b..135e034 100644
|
|
--- a/include/asm-avr32/arch-at32ap/portmux.h
|
|
+++ b/include/asm-avr32/arch-at32ap/portmux.h
|
|
@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin, unsigned int periph,
|
|
void at32_select_gpio(unsigned int pin, unsigned long flags);
|
|
void at32_reserve_pin(unsigned int pin);
|
|
|
|
+#ifdef CONFIG_GPIO_DEV
|
|
+
|
|
+/* Gang allocators and accessors; used by the GPIO /dev driver */
|
|
+int at32_gpio_port_is_valid(unsigned int port);
|
|
+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
|
|
+void at32_deselect_pins(unsigned int port, u32 pins);
|
|
+
|
|
+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
|
|
+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
|
|
+
|
|
+#endif /* CONFIG_GPIO_DEV */
|
|
+
|
|
#endif /* __ASM_ARCH_PORTMUX_H__ */
|
|
diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
|
|
new file mode 100644
|
|
index 0000000..56a4965
|
|
--- /dev/null
|
|
+++ b/include/asm-avr32/dma-controller.h
|
|
@@ -0,0 +1,166 @@
|
|
+/*
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
|
|
+#define __ASM_AVR32_DMA_CONTROLLER_H
|
|
+
|
|
+#include <linux/device.h>
|
|
+
|
|
+#define DMA_DIR_MEM_TO_MEM 0x0000
|
|
+#define DMA_DIR_MEM_TO_PERIPH 0x0001
|
|
+#define DMA_DIR_PERIPH_TO_MEM 0x0002
|
|
+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
|
|
+
|
|
+#define DMA_WIDTH_8BIT 0
|
|
+#define DMA_WIDTH_16BIT 1
|
|
+#define DMA_WIDTH_32BIT 2
|
|
+
|
|
+struct dma_request {
|
|
+ struct dma_controller *dmac;
|
|
+ struct list_head list;
|
|
+
|
|
+ unsigned short channel;
|
|
+
|
|
+ void (*xfer_complete)(struct dma_request *req);
|
|
+ void (*block_complete)(struct dma_request *req);
|
|
+ void (*error)(struct dma_request *req);
|
|
+};
|
|
+
|
|
+struct dma_request_sg {
|
|
+ struct dma_request req;
|
|
+
|
|
+ int nr_sg;
|
|
+ struct scatterlist *sg;
|
|
+ unsigned long block_size;
|
|
+ unsigned int nr_blocks;
|
|
+
|
|
+ dma_addr_t data_reg;
|
|
+ unsigned short periph_id;
|
|
+
|
|
+ unsigned char direction;
|
|
+ unsigned char width;
|
|
+};
|
|
+#define to_dma_request_sg(_req) \
|
|
+ container_of(_req, struct dma_request_sg, req)
|
|
+
|
|
+struct dma_request_cyclic {
|
|
+ struct dma_request req;
|
|
+
|
|
+ int periods;
|
|
+ unsigned long buffer_size;
|
|
+
|
|
+ dma_addr_t buffer_start;
|
|
+ dma_addr_t data_reg;
|
|
+
|
|
+ unsigned short periph_id;
|
|
+ unsigned char direction;
|
|
+ unsigned char width;
|
|
+
|
|
+ void *dev_id;
|
|
+};
|
|
+#define to_dma_request_cyclic(_req) \
|
|
+ container_of(_req, struct dma_request_cyclic, req)
|
|
+
|
|
+struct dma_request_memcpy {
|
|
+ struct dma_request req;
|
|
+
|
|
+ dma_addr_t src_addr;
|
|
+ unsigned int src_width;
|
|
+ unsigned int src_stride;
|
|
+
|
|
+ dma_addr_t dst_addr;
|
|
+ unsigned int dst_width;
|
|
+ unsigned int dst_stride;
|
|
+
|
|
+ size_t length;
|
|
+
|
|
+ unsigned short src_reverse:1;
|
|
+ unsigned short dst_reverse:1;
|
|
+};
|
|
+#define to_dma_request_memcpy(_req) \
|
|
+ container_of(_req, struct dma_request_memcpy, req)
|
|
+
|
|
+struct dma_controller {
|
|
+ struct list_head list;
|
|
+ int id;
|
|
+ struct device *dev;
|
|
+
|
|
+ int (*alloc_channel)(struct dma_controller *dmac);
|
|
+ void (*release_channel)(struct dma_controller *dmac,
|
|
+ int channel);
|
|
+ int (*prepare_request_sg)(struct dma_controller *dmac,
|
|
+ struct dma_request_sg *req);
|
|
+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
|
|
+ struct dma_request_cyclic *req);
|
|
+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
|
|
+ struct dma_request_memcpy *req);
|
|
+ int (*start_request)(struct dma_controller *dmac,
|
|
+ unsigned int channel);
|
|
+ int (*stop_request)(struct dma_controller *dmac,
|
|
+ unsigned int channel);
|
|
+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
|
|
+ unsigned int channel);
|
|
+};
|
|
+
|
|
+static inline int
|
|
+dma_alloc_channel(struct dma_controller *dmac)
|
|
+{
|
|
+ return dmac->alloc_channel(dmac);
|
|
+}
|
|
+
|
|
+static inline void
|
|
+dma_release_channel(struct dma_controller *dmac, int chan)
|
|
+{
|
|
+ dmac->release_channel(dmac, chan);
|
|
+}
|
|
+
|
|
+static inline int
|
|
+dma_prepare_request_sg(struct dma_controller *dmac,
|
|
+ struct dma_request_sg *req)
|
|
+{
|
|
+ return dmac->prepare_request_sg(dmac, req);
|
|
+}
|
|
+
|
|
+static inline int
|
|
+dma_prepare_request_cyclic(struct dma_controller *dmac,
|
|
+ struct dma_request_cyclic *req)
|
|
+{
|
|
+ return dmac->prepare_request_cyclic(dmac, req);
|
|
+}
|
|
+
|
|
+static inline int
|
|
+dma_prepare_request_memcpy(struct dma_controller *dmac,
|
|
+ struct dma_request_memcpy *req)
|
|
+{
|
|
+ return dmac->prepare_request_memcpy(dmac, req);
|
|
+}
|
|
+
|
|
+static inline int
|
|
+dma_start_request(struct dma_controller *dmac,
|
|
+ unsigned int channel)
|
|
+{
|
|
+ return dmac->start_request(dmac, channel);
|
|
+}
|
|
+
|
|
+static inline int
|
|
+dma_stop_request(struct dma_controller *dmac,
|
|
+ unsigned int channel)
|
|
+{
|
|
+ return dmac->stop_request(dmac, channel);
|
|
+}
|
|
+
|
|
+static inline dma_addr_t
|
|
+dma_get_current_pos(struct dma_controller *dmac,
|
|
+ unsigned int channel)
|
|
+{
|
|
+ return dmac->get_current_pos(dmac, channel);
|
|
+}
|
|
+
|
|
+extern int register_dma_controller(struct dma_controller *dmac);
|
|
+extern struct dma_controller *find_dma_controller(int id);
|
|
+
|
|
+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
|
|
diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h
|
|
index 83e6549..9315724 100644
|
|
--- a/include/asm-avr32/irq.h
|
|
+++ b/include/asm-avr32/irq.h
|
|
@@ -11,4 +11,9 @@
|
|
|
|
#define irq_canonicalize(i) (i)
|
|
|
|
+#ifndef __ASSEMBLER__
|
|
+int nmi_enable(void);
|
|
+void nmi_disable(void);
|
|
+#endif
|
|
+
|
|
#endif /* __ASM_AVR32_IOCTLS_H */
|
|
diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h
|
|
index fd7e990..ca4f954 100644
|
|
--- a/include/asm-avr32/kdebug.h
|
|
+++ b/include/asm-avr32/kdebug.h
|
|
@@ -5,6 +5,7 @@
|
|
enum die_val {
|
|
DIE_BREAKPOINT,
|
|
DIE_SSTEP,
|
|
+ DIE_NMI,
|
|
};
|
|
|
|
#endif /* __ASM_AVR32_KDEBUG_H */
|
|
diff --git a/include/asm-avr32/ocd.h b/include/asm-avr32/ocd.h
|
|
index 996405e..6bef094 100644
|
|
--- a/include/asm-avr32/ocd.h
|
|
+++ b/include/asm-avr32/ocd.h
|
|
@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned int reg, unsigned long value)
|
|
#define ocd_read(reg) __ocd_read(OCD_##reg)
|
|
#define ocd_write(reg, value) __ocd_write(OCD_##reg, value)
|
|
|
|
+struct task_struct;
|
|
+
|
|
+void ocd_enable(struct task_struct *child);
|
|
+void ocd_disable(struct task_struct *child);
|
|
+
|
|
#endif /* !__ASSEMBLER__ */
|
|
|
|
#endif /* __ASM_AVR32_OCD_H */
|
|
diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h
|
|
index a52576b..4212551 100644
|
|
--- a/include/asm-avr32/processor.h
|
|
+++ b/include/asm-avr32/processor.h
|
|
@@ -57,11 +57,25 @@ struct avr32_cpuinfo {
|
|
unsigned short cpu_revision;
|
|
enum tlb_config tlb_config;
|
|
unsigned long features;
|
|
+ u32 device_id;
|
|
|
|
struct cache_info icache;
|
|
struct cache_info dcache;
|
|
};
|
|
|
|
+static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
|
|
+{
|
|
+ return (cpu->device_id >> 1) & 0x7f;
|
|
+}
|
|
+static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
|
|
+{
|
|
+ return (cpu->device_id >> 12) & 0xffff;
|
|
+}
|
|
+static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
|
|
+{
|
|
+ return (cpu->device_id >> 28) & 0x0f;
|
|
+}
|
|
+
|
|
extern struct avr32_cpuinfo boot_cpu_data;
|
|
|
|
#ifdef CONFIG_SMP
|
|
diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h
|
|
index 8c5dba5..9e2d44f 100644
|
|
--- a/include/asm-avr32/ptrace.h
|
|
+++ b/include/asm-avr32/ptrace.h
|
|
@@ -121,7 +121,15 @@ struct pt_regs {
|
|
};
|
|
|
|
#ifdef __KERNEL__
|
|
-# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
|
|
+
|
|
+#include <asm/ocd.h>
|
|
+
|
|
+#define arch_ptrace_attach(child) ocd_enable(child)
|
|
+
|
|
+#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
|
|
+#define instruction_pointer(regs) ((regs)->pc)
|
|
+#define profile_pc(regs) instruction_pointer(regs)
|
|
+
|
|
extern void show_regs (struct pt_regs *);
|
|
|
|
static __inline__ int valid_user_regs(struct pt_regs *regs)
|
|
@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(struct pt_regs *regs)
|
|
return 0;
|
|
}
|
|
|
|
-#define instruction_pointer(regs) ((regs)->pc)
|
|
-
|
|
-#define profile_pc(regs) instruction_pointer(regs)
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h
|
|
index 184b574..07049f6 100644
|
|
--- a/include/asm-avr32/thread_info.h
|
|
+++ b/include/asm-avr32/thread_info.h
|
|
@@ -88,6 +88,7 @@ static inline struct thread_info *current_thread_info(void)
|
|
#define TIF_MEMDIE 6
|
|
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
|
|
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
|
|
+#define TIF_DEBUG 30 /* debugging enabled */
|
|
#define TIF_USERSPACE 31 /* true if FS sets userspace */
|
|
|
|
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
|
|
diff --git a/include/linux/atmel_pwm.h b/include/linux/atmel_pwm.h
|
|
new file mode 100644
|
|
index 0000000..ea04abb
|
|
--- /dev/null
|
|
+++ b/include/linux/atmel_pwm.h
|
|
@@ -0,0 +1,70 @@
|
|
+#ifndef __LINUX_ATMEL_PWM_H
|
|
+#define __LINUX_ATMEL_PWM_H
|
|
+
|
|
+/**
|
|
+ * struct pwm_channel - driver handle to a PWM channel
|
|
+ * @regs: base of this channel's registers
|
|
+ * @index: number of this channel (0..31)
|
|
+ * @mck: base clock rate, which can be prescaled and maybe subdivided
|
|
+ *
|
|
+ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
|
|
+ * Then they configure its clock rate (derived from MCK), alignment,
|
|
+ * polarity, and duty cycle by writing directly to the channel registers,
|
|
+ * before enabling the channel by calling pwm_channel_enable().
|
|
+ *
|
|
+ * After emitting a PWM signal for the desired length of time, drivers
|
|
+ * may then pwm_channel_disable() or pwm_channel_free(). Both of these
|
|
+ * disable the channel, but when it's freed the IRQ is deconfigured and
|
|
+ * the channel must later be re-allocated and reconfigured.
|
|
+ *
|
|
+ * Note that if the period or duty cycle need to be changed while the
|
|
+ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
|
|
+ * mechanism, either polling until they change or getting implicitly
|
|
+ * notified through a once-per-period interrupt handler.
|
|
+ */
|
|
+struct pwm_channel {
|
|
+ void __iomem *regs;
|
|
+ unsigned index;
|
|
+ unsigned long mck;
|
|
+};
|
|
+
|
|
+extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
|
|
+extern int pwm_channel_free(struct pwm_channel *ch);
|
|
+
|
|
+extern int pwm_clk_alloc(unsigned prescale, unsigned div);
|
|
+extern void pwm_clk_free(unsigned clk);
|
|
+
|
|
+extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
|
|
+
|
|
+#define pwm_channel_enable(ch) __pwm_channel_onoff((ch), 1)
|
|
+#define pwm_channel_disable(ch) __pwm_channel_onoff((ch), 0)
|
|
+
|
|
+/* periodic interrupts, mostly for CUPD changes to period or cycle */
|
|
+extern int pwm_channel_handler(struct pwm_channel *ch,
|
|
+ void (*handler)(struct pwm_channel *ch));
|
|
+
|
|
+/* per-channel registers (banked at pwm_channel->regs) */
|
|
+#define PWM_CMR 0x00 /* mode register */
|
|
+#define PWM_CPR_CPD (1 << 10) /* set: CUPD modifies period */
|
|
+#define PWM_CPR_CPOL (1 << 9) /* set: idle high */
|
|
+#define PWM_CPR_CALG (1 << 8) /* set: center align */
|
|
+#define PWM_CPR_CPRE (0xf << 0) /* mask: rate is mck/(2^pre) */
|
|
+#define PWM_CPR_CLKA (0xb << 0) /* rate CLKA */
|
|
+#define PWM_CPR_CLKB (0xc << 0) /* rate CLKB */
|
|
+#define PWM_CDTY 0x04 /* duty cycle (max of CPRD) */
|
|
+#define PWM_CPRD 0x08 /* period (count up from zero) */
|
|
+#define PWM_CCNT 0x0c /* counter (20 bits?) */
|
|
+#define PWM_CUPD 0x10 /* update CPRD (or CDTY) next period */
|
|
+
|
|
+static inline void
|
|
+pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
|
|
+{
|
|
+ __raw_writel(val, pwmc->regs + offset);
|
|
+}
|
|
+
|
|
+static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
|
|
+{
|
|
+ return __raw_readl(pwmc->regs + offset);
|
|
+}
|
|
+
|
|
+#endif /* __LINUX_ATMEL_PWM_H */
|
|
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
|
|
index 4eea637..336c20d 100644
|
|
--- a/include/video/atmel_lcdc.h
|
|
+++ b/include/video/atmel_lcdc.h
|
|
@@ -22,7 +22,7 @@
|
|
#ifndef __ATMEL_LCDC_H__
|
|
#define __ATMEL_LCDC_H__
|
|
|
|
- /* LCD Controller info data structure */
|
|
+ /* LCD Controller info data structure, stored in device platform_data */
|
|
struct atmel_lcdfb_info {
|
|
spinlock_t lock;
|
|
struct fb_info *info;
|
|
@@ -33,7 +33,14 @@ struct atmel_lcdfb_info {
|
|
struct platform_device *pdev;
|
|
struct clk *bus_clk;
|
|
struct clk *lcdc_clk;
|
|
- unsigned int default_bpp;
|
|
+
|
|
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
|
|
+ struct backlight_device *backlight;
|
|
+ u8 bl_power;
|
|
+#endif
|
|
+ bool lcdcon_is_backlight;
|
|
+
|
|
+ u8 default_bpp;
|
|
unsigned int default_lcdcon2;
|
|
unsigned int default_dmacon;
|
|
void (*atmel_lcdfb_power_control)(int on);
|
|
@@ -115,20 +122,20 @@ struct atmel_lcdfb_info {
|
|
#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
|
|
|
|
#define ATMEL_LCDC_TIM1 0x0808
|
|
-#define ATMEL_LCDC_VFP (0xff << 0)
|
|
+#define ATMEL_LCDC_VFP (0xffU << 0)
|
|
#define ATMEL_LCDC_VBP_OFFSET 8
|
|
-#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
|
|
+#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET)
|
|
#define ATMEL_LCDC_VPW_OFFSET 16
|
|
-#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
|
|
+#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET)
|
|
#define ATMEL_LCDC_VHDLY_OFFSET 24
|
|
-#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
|
|
+#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET)
|
|
|
|
#define ATMEL_LCDC_TIM2 0x080c
|
|
-#define ATMEL_LCDC_HBP (0xff << 0)
|
|
+#define ATMEL_LCDC_HBP (0xffU << 0)
|
|
#define ATMEL_LCDC_HPW_OFFSET 8
|
|
-#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
|
|
+#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET)
|
|
#define ATMEL_LCDC_HFP_OFFSET 21
|
|
-#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
|
|
+#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET)
|
|
|
|
#define ATMEL_LCDC_LCDFRMCFG 0x0810
|
|
#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
|
|
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
|
|
index c25db86..c719bb9 100644
|
|
--- a/kernel/ptrace.c
|
|
+++ b/kernel/ptrace.c
|
|
@@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
|
|
lock_kernel();
|
|
if (request == PTRACE_TRACEME) {
|
|
ret = ptrace_traceme();
|
|
+ if (!ret)
|
|
+ arch_ptrace_attach(current);
|
|
goto out;
|
|
}
|
|
|
|
diff --git a/sound/Kconfig b/sound/Kconfig
|
|
index b2a2db4..29a9979 100644
|
|
--- a/sound/Kconfig
|
|
+++ b/sound/Kconfig
|
|
@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
|
|
|
|
source "sound/arm/Kconfig"
|
|
|
|
+source "sound/avr32/Kconfig"
|
|
+
|
|
if SPI
|
|
source "sound/spi/Kconfig"
|
|
endif
|
|
diff --git a/sound/Makefile b/sound/Makefile
|
|
index c76d707..a52b236 100644
|
|
--- a/sound/Makefile
|
|
+++ b/sound/Makefile
|
|
@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
|
|
obj-$(CONFIG_SOUND_PRIME) += oss/
|
|
obj-$(CONFIG_DMASOUND) += oss/
|
|
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
|
|
- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
|
|
+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
|
|
obj-$(CONFIG_SND_AOA) += aoa/
|
|
|
|
# This one must be compilable even if sound is configured out
|
|
diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
|
|
new file mode 100644
|
|
index 0000000..17d1d91
|
|
--- /dev/null
|
|
+++ b/sound/avr32/Kconfig
|
|
@@ -0,0 +1,11 @@
|
|
+menu "AVR32 devices"
|
|
+ depends on SND != n && AVR32
|
|
+
|
|
+config SND_ATMEL_AC97
|
|
+ tristate "Atmel AC97 Controller Driver"
|
|
+ select SND_PCM
|
|
+ select SND_AC97_CODEC
|
|
+ help
|
|
+ ALSA sound driver for the Atmel AC97 controller.
|
|
+
|
|
+endmenu
|
|
diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
|
|
new file mode 100644
|
|
index 0000000..5d87d0e
|
|
--- /dev/null
|
|
+++ b/sound/avr32/Makefile
|
|
@@ -0,0 +1,3 @@
|
|
+snd-atmel-ac97-objs := ac97c.o
|
|
+
|
|
+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
|
|
diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
|
|
new file mode 100644
|
|
index 0000000..0ec0b1c
|
|
--- /dev/null
|
|
+++ b/sound/avr32/ac97c.c
|
|
@@ -0,0 +1,914 @@
|
|
+/*
|
|
+ * Driver for the Atmel AC97 controller
|
|
+ *
|
|
+ * Copyright (C) 2005-2007 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License version 2 as published by
|
|
+ * the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/clk.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/mutex.h>
|
|
+#include <linux/io.h>
|
|
+
|
|
+#include <sound/driver.h>
|
|
+#include <sound/core.h>
|
|
+#include <sound/initval.h>
|
|
+#include <sound/pcm.h>
|
|
+#include <sound/pcm_params.h>
|
|
+#include <sound/ac97_codec.h>
|
|
+#include <sound/memalloc.h>
|
|
+
|
|
+#include <asm/dma-controller.h>
|
|
+
|
|
+#include "ac97c.h"
|
|
+
|
|
+/* Serialize access to opened */
|
|
+static DEFINE_MUTEX(opened_mutex);
|
|
+
|
|
+struct atmel_ac97_dma_info {
|
|
+ struct dma_request_cyclic req_tx;
|
|
+ struct dma_request_cyclic req_rx;
|
|
+ unsigned short rx_periph_id;
|
|
+ unsigned short tx_periph_id;
|
|
+};
|
|
+
|
|
+struct atmel_ac97 {
|
|
+ /* Serialize access to opened */
|
|
+ spinlock_t lock;
|
|
+ void __iomem *regs;
|
|
+ struct snd_pcm_substream *playback_substream;
|
|
+ struct snd_pcm_substream *capture_substream;
|
|
+ struct snd_card *card;
|
|
+ struct snd_pcm *pcm;
|
|
+ struct snd_ac97 *ac97;
|
|
+ struct snd_ac97_bus *ac97_bus;
|
|
+ int opened;
|
|
+ int period;
|
|
+ u64 cur_format;
|
|
+ unsigned int cur_rate;
|
|
+ struct clk *mck;
|
|
+ struct platform_device *pdev;
|
|
+ struct atmel_ac97_dma_info dma;
|
|
+};
|
|
+
|
|
+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
|
|
+
|
|
+#define ac97c_writel(chip, reg, val) \
|
|
+ __raw_writel((val), (chip)->regs + AC97C_##reg)
|
|
+#define ac97c_readl(chip, reg) \
|
|
+ __raw_readl((chip)->regs + AC97C_##reg)
|
|
+
|
|
+/*
|
|
+ * PCM part
|
|
+ */
|
|
+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
|
|
+ .info = (SNDRV_PCM_INFO_INTERLEAVED
|
|
+ | SNDRV_PCM_INFO_MMAP
|
|
+ | SNDRV_PCM_INFO_MMAP_VALID
|
|
+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
|
|
+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
|
|
+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
|
|
+ | SNDRV_PCM_FMTBIT_S16_LE),
|
|
+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
|
|
+ .rate_min = 4000,
|
|
+ .rate_max = 48000,
|
|
+ .channels_min = 1,
|
|
+ .channels_max = 6,
|
|
+ .buffer_bytes_max = 64*1024,
|
|
+ .period_bytes_min = 512,
|
|
+ .period_bytes_max = 4095,
|
|
+ .periods_min = 8,
|
|
+ .periods_max = 1024,
|
|
+};
|
|
+
|
|
+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
|
|
+ .info = (SNDRV_PCM_INFO_INTERLEAVED
|
|
+ | SNDRV_PCM_INFO_MMAP
|
|
+ | SNDRV_PCM_INFO_MMAP_VALID
|
|
+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
|
|
+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
|
|
+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
|
|
+ | SNDRV_PCM_FMTBIT_S16_LE),
|
|
+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
|
|
+ .rate_min = 4000,
|
|
+ .rate_max = 48000,
|
|
+ .channels_min = 1,
|
|
+ .channels_max = 2,
|
|
+ .buffer_bytes_max = 64*1024,
|
|
+ .period_bytes_min = 512,
|
|
+ .period_bytes_max = 4095,
|
|
+ .periods_min = 8,
|
|
+ .periods_max = 1024,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * PCM functions
|
|
+ */
|
|
+static int
|
|
+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
+
|
|
+ mutex_lock(&opened_mutex);
|
|
+ chip->opened++;
|
|
+ runtime->hw = snd_atmel_ac97_playback_hw;
|
|
+ if (chip->cur_rate) {
|
|
+ runtime->hw.rate_min = chip->cur_rate;
|
|
+ runtime->hw.rate_max = chip->cur_rate;
|
|
+ }
|
|
+ if (chip->cur_format)
|
|
+ runtime->hw.formats = (1ULL << chip->cur_format);
|
|
+ mutex_unlock(&opened_mutex);
|
|
+ chip->playback_substream = substream;
|
|
+ chip->period = 0;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int
|
|
+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
+
|
|
+ mutex_lock(&opened_mutex);
|
|
+ chip->opened++;
|
|
+ runtime->hw = snd_atmel_ac97_capture_hw;
|
|
+ if (chip->cur_rate) {
|
|
+ runtime->hw.rate_min = chip->cur_rate;
|
|
+ runtime->hw.rate_max = chip->cur_rate;
|
|
+ }
|
|
+ if (chip->cur_format)
|
|
+ runtime->hw.formats = (1ULL << chip->cur_format);
|
|
+ mutex_unlock(&opened_mutex);
|
|
+ chip->capture_substream = substream;
|
|
+ chip->period = 0;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ mutex_lock(&opened_mutex);
|
|
+ chip->opened--;
|
|
+ if (!chip->opened) {
|
|
+ chip->cur_rate = 0;
|
|
+ chip->cur_format = 0;
|
|
+ }
|
|
+ mutex_unlock(&opened_mutex);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ mutex_lock(&opened_mutex);
|
|
+ chip->opened--;
|
|
+ if (!chip->opened) {
|
|
+ chip->cur_rate = 0;
|
|
+ chip->cur_format = 0;
|
|
+ }
|
|
+ mutex_unlock(&opened_mutex);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int
|
|
+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
|
|
+ struct snd_pcm_hw_params *hw_params)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ int err;
|
|
+
|
|
+ err = snd_pcm_lib_malloc_pages(substream,
|
|
+ params_buffer_bytes(hw_params));
|
|
+ if (err < 0)
|
|
+ return err;
|
|
+
|
|
+ /* Set restrictions to params */
|
|
+ mutex_lock(&opened_mutex);
|
|
+ chip->cur_rate = params_rate(hw_params);
|
|
+ chip->cur_format = params_format(hw_params);
|
|
+ mutex_unlock(&opened_mutex);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int
|
|
+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
|
|
+ struct snd_pcm_hw_params *hw_params)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ int err;
|
|
+
|
|
+ err = snd_pcm_lib_malloc_pages(substream,
|
|
+ params_buffer_bytes(hw_params));
|
|
+ if (err < 0)
|
|
+ return err;
|
|
+
|
|
+ /* Set restrictions to params */
|
|
+ mutex_lock(&opened_mutex);
|
|
+ chip->cur_rate = params_rate(hw_params);
|
|
+ chip->cur_format = params_format(hw_params);
|
|
+ mutex_unlock(&opened_mutex);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ return snd_pcm_lib_free_pages(substream);
|
|
+}
|
|
+
|
|
+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
|
|
+{
|
|
+
|
|
+ return snd_pcm_lib_free_pages(substream);
|
|
+}
|
|
+
|
|
+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ struct platform_device *pdev = chip->pdev;
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
+ int block_size = frames_to_bytes(runtime, runtime->period_size);
|
|
+ unsigned long word = 0;
|
|
+ unsigned long buffer_size = 0;
|
|
+
|
|
+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
|
|
+ block_size * 2, DMA_TO_DEVICE);
|
|
+
|
|
+ /* Assign slots to channels */
|
|
+ switch (substream->runtime->channels) {
|
|
+ case 1:
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
|
|
+ break;
|
|
+ case 2:
|
|
+ /* Assign Left and Right slot to Channel A */
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
|
|
+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
|
|
+ break;
|
|
+ default:
|
|
+ /* TODO: support more than two channels */
|
|
+ return -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+ ac97c_writel(chip, OCA, word);
|
|
+
|
|
+ /* Configure sample format and size */
|
|
+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
|
|
+
|
|
+ switch (runtime->format) {
|
|
+ case SNDRV_PCM_FORMAT_S16_LE:
|
|
+ word |= AC97C_CMR_CEM_LITTLE;
|
|
+ break;
|
|
+ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
|
|
+ default:
|
|
+ word &= ~AC97C_CMR_CEM_LITTLE;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ ac97c_writel(chip, CAMR, word);
|
|
+
|
|
+ /* Set variable rate if needed */
|
|
+ if (runtime->rate != 48000) {
|
|
+ word = ac97c_readl(chip, MR);
|
|
+ word |= AC97C_MR_VRA;
|
|
+ ac97c_writel(chip, MR, word);
|
|
+ } else {
|
|
+ /* Clear Variable Rate Bit */
|
|
+ word = ac97c_readl(chip, MR);
|
|
+ word &= ~AC97C_MR_VRA;
|
|
+ ac97c_writel(chip, MR, word);
|
|
+ }
|
|
+
|
|
+ /* Set rate */
|
|
+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
|
|
+
|
|
+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
|
|
+ runtime->periods;
|
|
+
|
|
+ chip->dma.req_tx.buffer_size = buffer_size;
|
|
+ chip->dma.req_tx.periods = runtime->periods;
|
|
+
|
|
+ BUG_ON(chip->dma.req_tx.buffer_size !=
|
|
+ (chip->dma.req_tx.periods *
|
|
+ frames_to_bytes(runtime, runtime->period_size)));
|
|
+
|
|
+ chip->dma.req_tx.buffer_start = runtime->dma_addr;
|
|
+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
|
|
+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
|
|
+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
|
|
+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
|
|
+ chip->dma.req_tx.dev_id = chip;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ struct platform_device *pdev = chip->pdev;
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
+ int block_size = frames_to_bytes(runtime, runtime->period_size);
|
|
+ unsigned long word = 0;
|
|
+ unsigned long buffer_size = 0;
|
|
+
|
|
+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
|
|
+ block_size * 2, DMA_FROM_DEVICE);
|
|
+
|
|
+ /* Assign slots to channels */
|
|
+ switch (substream->runtime->channels) {
|
|
+ case 1:
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
|
|
+ break;
|
|
+ case 2:
|
|
+ /* Assign Left and Right slot to Channel A */
|
|
+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
|
|
+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
|
|
+ break;
|
|
+ default:
|
|
+ /* TODO: support more than two channels */
|
|
+ return -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+ ac97c_writel(chip, ICA, word);
|
|
+
|
|
+ /* Configure sample format and size */
|
|
+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
|
|
+
|
|
+ switch (runtime->format) {
|
|
+ case SNDRV_PCM_FORMAT_S16_LE:
|
|
+ word |= AC97C_CMR_CEM_LITTLE;
|
|
+ break;
|
|
+ case SNDRV_PCM_FORMAT_S16_BE:
|
|
+ default:
|
|
+ word &= ~(AC97C_CMR_CEM_LITTLE);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ ac97c_writel(chip, CAMR, word);
|
|
+
|
|
+ /* Set variable rate if needed */
|
|
+ if (runtime->rate != 48000) {
|
|
+ word = ac97c_readl(chip, MR);
|
|
+ word |= AC97C_MR_VRA;
|
|
+ ac97c_writel(chip, MR, word);
|
|
+ } else {
|
|
+ /* Clear Variable Rate Bit */
|
|
+ word = ac97c_readl(chip, MR);
|
|
+ word &= ~(AC97C_MR_VRA);
|
|
+ ac97c_writel(chip, MR, word);
|
|
+ }
|
|
+
|
|
+ /* Set rate */
|
|
+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
|
|
+
|
|
+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
|
|
+ runtime->periods;
|
|
+
|
|
+ chip->dma.req_rx.buffer_size = buffer_size;
|
|
+ chip->dma.req_rx.periods = runtime->periods;
|
|
+
|
|
+ BUG_ON(chip->dma.req_rx.buffer_size !=
|
|
+ (chip->dma.req_rx.periods *
|
|
+ frames_to_bytes(runtime, runtime->period_size)));
|
|
+
|
|
+ chip->dma.req_rx.buffer_start = runtime->dma_addr;
|
|
+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
|
|
+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
|
|
+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
|
|
+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
|
|
+ chip->dma.req_rx.dev_id = chip;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+ static int
|
|
+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ unsigned long camr;
|
|
+ int flags, err = 0;
|
|
+
|
|
+ spin_lock_irqsave(&chip->lock, flags);
|
|
+ camr = ac97c_readl(chip, CAMR);
|
|
+
|
|
+ switch (cmd) {
|
|
+ case SNDRV_PCM_TRIGGER_START:
|
|
+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
|
|
+ &chip->dma.req_tx);
|
|
+ dma_start_request(chip->dma.req_tx.req.dmac,
|
|
+ chip->dma.req_tx.req.channel);
|
|
+ camr |= AC97C_CMR_CENA;
|
|
+ break;
|
|
+ case SNDRV_PCM_TRIGGER_STOP:
|
|
+ err = dma_stop_request(chip->dma.req_tx.req.dmac,
|
|
+ chip->dma.req_tx.req.channel);
|
|
+ if (chip->opened <= 1)
|
|
+ camr &= ~AC97C_CMR_CENA;
|
|
+ break;
|
|
+ default:
|
|
+ err = -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ ac97c_writel(chip, CAMR, camr);
|
|
+
|
|
+ spin_unlock_irqrestore(&chip->lock, flags);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+ static int
|
|
+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ unsigned long camr;
|
|
+ int flags, err = 0;
|
|
+
|
|
+ spin_lock_irqsave(&chip->lock, flags);
|
|
+ camr = ac97c_readl(chip, CAMR);
|
|
+
|
|
+ switch (cmd) {
|
|
+ case SNDRV_PCM_TRIGGER_START:
|
|
+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
|
|
+ &chip->dma.req_rx);
|
|
+ dma_start_request(chip->dma.req_rx.req.dmac,
|
|
+ chip->dma.req_rx.req.channel);
|
|
+ camr |= AC97C_CMR_CENA;
|
|
+ break;
|
|
+ case SNDRV_PCM_TRIGGER_STOP:
|
|
+ err = dma_stop_request(chip->dma.req_rx.req.dmac,
|
|
+ chip->dma.req_rx.req.channel);
|
|
+ mutex_lock(&opened_mutex);
|
|
+ if (chip->opened <= 1)
|
|
+ camr &= ~AC97C_CMR_CENA;
|
|
+ mutex_unlock(&opened_mutex);
|
|
+ break;
|
|
+ default:
|
|
+ err = -EINVAL;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ ac97c_writel(chip, CAMR, camr);
|
|
+
|
|
+ spin_unlock_irqrestore(&chip->lock, flags);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+ static snd_pcm_uframes_t
|
|
+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
+ snd_pcm_uframes_t pos;
|
|
+ unsigned long bytes;
|
|
+
|
|
+ bytes = (dma_get_current_pos
|
|
+ (chip->dma.req_tx.req.dmac,
|
|
+ chip->dma.req_tx.req.channel) - runtime->dma_addr);
|
|
+ pos = bytes_to_frames(runtime, bytes);
|
|
+ if (pos >= runtime->buffer_size)
|
|
+ pos -= runtime->buffer_size;
|
|
+
|
|
+ return pos;
|
|
+}
|
|
+
|
|
+ static snd_pcm_uframes_t
|
|
+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
|
|
+{
|
|
+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
|
|
+ struct snd_pcm_runtime *runtime = substream->runtime;
|
|
+ snd_pcm_uframes_t pos;
|
|
+ unsigned long bytes;
|
|
+
|
|
+ bytes = (dma_get_current_pos
|
|
+ (chip->dma.req_rx.req.dmac,
|
|
+ chip->dma.req_rx.req.channel)
|
|
+ - runtime->dma_addr);
|
|
+ pos = bytes_to_frames(runtime, bytes);
|
|
+ if (pos >= runtime->buffer_size)
|
|
+ pos -= runtime->buffer_size;
|
|
+
|
|
+
|
|
+ return pos;
|
|
+}
|
|
+
|
|
+static struct snd_pcm_ops atmel_ac97_playback_ops = {
|
|
+ .open = snd_atmel_ac97_playback_open,
|
|
+ .close = snd_atmel_ac97_playback_close,
|
|
+ .ioctl = snd_pcm_lib_ioctl,
|
|
+ .hw_params = snd_atmel_ac97_playback_hw_params,
|
|
+ .hw_free = snd_atmel_ac97_playback_hw_free,
|
|
+ .prepare = snd_atmel_ac97_playback_prepare,
|
|
+ .trigger = snd_atmel_ac97_playback_trigger,
|
|
+ .pointer = snd_atmel_ac97_playback_pointer,
|
|
+};
|
|
+
|
|
+static struct snd_pcm_ops atmel_ac97_capture_ops = {
|
|
+ .open = snd_atmel_ac97_capture_open,
|
|
+ .close = snd_atmel_ac97_capture_close,
|
|
+ .ioctl = snd_pcm_lib_ioctl,
|
|
+ .hw_params = snd_atmel_ac97_capture_hw_params,
|
|
+ .hw_free = snd_atmel_ac97_capture_hw_free,
|
|
+ .prepare = snd_atmel_ac97_capture_prepare,
|
|
+ .trigger = snd_atmel_ac97_capture_trigger,
|
|
+ .pointer = snd_atmel_ac97_capture_pointer,
|
|
+};
|
|
+
|
|
+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
|
|
+ /* Playback */
|
|
+ {
|
|
+ .exclusive = 1,
|
|
+ .r = { {
|
|
+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
|
|
+ | (1 << AC97_SLOT_PCM_RIGHT)
|
|
+ | (1 << AC97_SLOT_PCM_CENTER)
|
|
+ | (1 << AC97_SLOT_PCM_SLEFT)
|
|
+ | (1 << AC97_SLOT_PCM_SRIGHT)
|
|
+ | (1 << AC97_SLOT_LFE)),
|
|
+ } }
|
|
+ },
|
|
+ /* PCM in */
|
|
+ {
|
|
+ .stream = 1,
|
|
+ .exclusive = 1,
|
|
+ .r = { {
|
|
+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
|
|
+ | (1 << AC97_SLOT_PCM_RIGHT)),
|
|
+ } }
|
|
+ },
|
|
+ /* Mic in */
|
|
+ {
|
|
+ .stream = 1,
|
|
+ .exclusive = 1,
|
|
+ .r = { {
|
|
+ .slots = (1<<AC97_SLOT_MIC),
|
|
+ } }
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
|
|
+{
|
|
+ struct snd_pcm *pcm;
|
|
+ int err;
|
|
+
|
|
+ err = snd_ac97_pcm_assign(chip->ac97_bus,
|
|
+ ARRAY_SIZE(atmel_ac97_pcm_defs),
|
|
+ atmel_ac97_pcm_defs);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
|
|
+ &atmel_ac97_playback_ops);
|
|
+
|
|
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
|
|
+ &atmel_ac97_capture_ops);
|
|
+
|
|
+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
+ &chip->pdev->dev,
|
|
+ 128 * 1024, 128 * 1024);
|
|
+
|
|
+ pcm->private_data = chip;
|
|
+ pcm->info_flags = 0;
|
|
+ strcpy(pcm->name, "Atmel-AC97");
|
|
+ chip->pcm = pcm;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Mixer part.
|
|
+ */
|
|
+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
|
|
+{
|
|
+ int err;
|
|
+ struct snd_ac97_template template;
|
|
+
|
|
+ memset(&template, 0, sizeof(template));
|
|
+ template.private_data = chip;
|
|
+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
|
|
+
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static void atmel_ac97_error(struct dma_request *_req)
|
|
+{
|
|
+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
|
|
+ struct atmel_ac97 *chip = req->dev_id;
|
|
+
|
|
+ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
|
|
+ req->req.channel);
|
|
+}
|
|
+
|
|
+static void atmel_ac97_block_complete(struct dma_request *_req)
|
|
+{
|
|
+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
|
|
+ struct atmel_ac97 *chip = req->dev_id;
|
|
+ if (req->periph_id == chip->dma.tx_periph_id)
|
|
+ snd_pcm_period_elapsed(chip->playback_substream);
|
|
+ else
|
|
+ snd_pcm_period_elapsed(chip->capture_substream);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Codec part.
|
|
+ */
|
|
+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
|
+ unsigned short val)
|
|
+{
|
|
+ struct atmel_ac97 *chip = get_chip(ac97);
|
|
+ unsigned long word;
|
|
+ int timeout = 40;
|
|
+
|
|
+ word = (reg & 0x7f) << 16 | val;
|
|
+
|
|
+ do {
|
|
+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
|
|
+ ac97c_writel(chip, COTHR, word);
|
|
+ return;
|
|
+ }
|
|
+ udelay(1);
|
|
+ } while (--timeout);
|
|
+
|
|
+ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
|
|
+}
|
|
+
|
|
+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
|
|
+ unsigned short reg)
|
|
+{
|
|
+ struct atmel_ac97 *chip = get_chip(ac97);
|
|
+ unsigned long word;
|
|
+ int timeout = 40;
|
|
+ int write = 10;
|
|
+
|
|
+ word = (0x80 | (reg & 0x7f)) << 16;
|
|
+
|
|
+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
|
|
+ ac97c_readl(chip, CORHR);
|
|
+
|
|
+retry_write:
|
|
+ timeout = 40;
|
|
+
|
|
+ do {
|
|
+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
|
|
+ ac97c_writel(chip, COTHR, word);
|
|
+ goto read_reg;
|
|
+ }
|
|
+ mdelay(10);
|
|
+ } while (--timeout);
|
|
+
|
|
+ if (!--write)
|
|
+ goto timed_out;
|
|
+ goto retry_write;
|
|
+
|
|
+read_reg:
|
|
+ do {
|
|
+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
|
|
+ unsigned short val = ac97c_readl(chip, CORHR);
|
|
+ return val;
|
|
+ }
|
|
+ mdelay(10);
|
|
+ } while (--timeout);
|
|
+
|
|
+ if (!--write)
|
|
+ goto timed_out;
|
|
+ goto retry_write;
|
|
+
|
|
+timed_out:
|
|
+ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
|
|
+ return 0xffff;
|
|
+}
|
|
+
|
|
+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
|
|
+{
|
|
+ ac97c_writel(chip, MR, AC97C_MR_WRST);
|
|
+ mdelay(1);
|
|
+ ac97c_writel(chip, MR, AC97C_MR_ENA);
|
|
+}
|
|
+
|
|
+static void snd_atmel_ac97_destroy(struct snd_card *card)
|
|
+{
|
|
+ struct atmel_ac97 *chip = get_chip(card);
|
|
+
|
|
+ if (chip->regs)
|
|
+ iounmap(chip->regs);
|
|
+
|
|
+ if (chip->mck) {
|
|
+ clk_disable(chip->mck);
|
|
+ clk_put(chip->mck);
|
|
+ }
|
|
+
|
|
+ if (chip->dma.req_tx.req.dmac) {
|
|
+ dma_release_channel(chip->dma.req_tx.req.dmac,
|
|
+ chip->dma.req_tx.req.channel);
|
|
+ }
|
|
+ if (chip->dma.req_rx.req.dmac) {
|
|
+ dma_release_channel(chip->dma.req_rx.req.dmac,
|
|
+ chip->dma.req_rx.req.channel);
|
|
+ }
|
|
+}
|
|
+
|
|
+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
|
|
+ struct platform_device *pdev)
|
|
+{
|
|
+ static struct snd_ac97_bus_ops ops = {
|
|
+ .write = snd_atmel_ac97_write,
|
|
+ .read = snd_atmel_ac97_read,
|
|
+ };
|
|
+ struct atmel_ac97 *chip = get_chip(card);
|
|
+ struct resource *regs;
|
|
+ struct clk *mck;
|
|
+ int err;
|
|
+
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!regs)
|
|
+ return -ENXIO;
|
|
+
|
|
+ mck = clk_get(&pdev->dev, "pclk");
|
|
+ if (IS_ERR(mck))
|
|
+ return PTR_ERR(mck);
|
|
+ clk_enable(mck);
|
|
+ chip->mck = mck;
|
|
+
|
|
+ card->private_free = snd_atmel_ac97_destroy;
|
|
+
|
|
+ spin_lock_init(&chip->lock);
|
|
+ chip->card = card;
|
|
+ chip->pdev = pdev;
|
|
+
|
|
+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
+ if (!chip->regs)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ snd_card_set_dev(card, &pdev->dev);
|
|
+
|
|
+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
|
|
+
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
|
|
+{
|
|
+ static int dev;
|
|
+ struct snd_card *card;
|
|
+ struct atmel_ac97 *chip;
|
|
+ int err;
|
|
+ int ch;
|
|
+
|
|
+ mutex_init(&opened_mutex);
|
|
+
|
|
+ err = -ENOMEM;
|
|
+ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
|
|
+ THIS_MODULE, sizeof(struct atmel_ac97));
|
|
+ if (!card)
|
|
+ goto out;
|
|
+ chip = get_chip(card);
|
|
+
|
|
+ err = snd_atmel_ac97_create(card, pdev);
|
|
+ if (err)
|
|
+ goto out_free_card;
|
|
+
|
|
+ snd_atmel_ac97_reset(chip);
|
|
+
|
|
+ err = snd_atmel_ac97_mixer_new(chip);
|
|
+ if (err)
|
|
+ goto out_free_card;
|
|
+
|
|
+ err = snd_atmel_ac97_pcm_new(chip);
|
|
+ if (err)
|
|
+ goto out_free_card;
|
|
+
|
|
+ /* TODO: Get this information from the platform device */
|
|
+ chip->dma.req_tx.req.dmac = find_dma_controller(0);
|
|
+ if (!chip->dma.req_tx.req.dmac) {
|
|
+ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
|
|
+ err = -ENODEV;
|
|
+ goto out_free_card;
|
|
+ }
|
|
+ chip->dma.req_rx.req.dmac = find_dma_controller(0);
|
|
+ if (!chip->dma.req_rx.req.dmac) {
|
|
+ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
|
|
+ err = -ENODEV;
|
|
+ goto out_free_card;
|
|
+ }
|
|
+
|
|
+ chip->dma.rx_periph_id = 3;
|
|
+ chip->dma.tx_periph_id = 4;
|
|
+
|
|
+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
|
|
+ if (ch < 0) {
|
|
+ dev_dbg(&chip->pdev->dev,
|
|
+ "could not allocate TX DMA channel\n");
|
|
+ err = ch;
|
|
+ goto out_free_card;
|
|
+ }
|
|
+ chip->dma.req_tx.req.channel = ch;
|
|
+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
|
|
+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
|
|
+ chip->dma.req_tx.req.error = atmel_ac97_error;
|
|
+
|
|
+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
|
|
+ if (ch < 0) {
|
|
+ dev_dbg(&chip->pdev->dev,
|
|
+ "could not allocate RX DMA channel\n");
|
|
+ err = ch;
|
|
+ goto out_free_card;
|
|
+ }
|
|
+ chip->dma.req_rx.req.channel = ch;
|
|
+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
|
|
+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
|
|
+ chip->dma.req_rx.req.error = atmel_ac97_error;
|
|
+
|
|
+ strcpy(card->driver, "atmel_ac97c");
|
|
+ strcpy(card->shortname, "atmel_ac97c");
|
|
+ sprintf(card->longname, "Atmel AVR32 AC97 controller");
|
|
+
|
|
+ err = snd_card_register(card);
|
|
+ if (err)
|
|
+ goto out_free_card;
|
|
+
|
|
+ platform_set_drvdata(pdev, card);
|
|
+ dev++;
|
|
+
|
|
+ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
|
|
+ chip->regs);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_free_card:
|
|
+ snd_card_free(card);
|
|
+out:
|
|
+ return err;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+ static int
|
|
+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
|
|
+{
|
|
+ struct snd_card *card = platform_get_drvdata(pdev);
|
|
+ struct atmel_ac97 *chip = card->private_data;
|
|
+
|
|
+ clk_disable(chip->mck);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int snd_atmel_ac97_resume(struct platform_device *pdev)
|
|
+{
|
|
+ struct snd_card *card = dev_get_drvdata(pdev);
|
|
+ struct atmel_ac97 *chip = card->private_data;
|
|
+
|
|
+ clk_enable(chip->mck);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+#else
|
|
+#define snd_atmel_ac97_suspend NULL
|
|
+#define snd_atmel_ac97_resume NULL
|
|
+#endif
|
|
+
|
|
+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct snd_card *card = platform_get_drvdata(pdev);
|
|
+
|
|
+ snd_card_free(card);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver atmel_ac97_driver = {
|
|
+ .remove = __devexit_p(snd_atmel_ac97_remove),
|
|
+ .driver = {
|
|
+ .name = "atmel_ac97c",
|
|
+ },
|
|
+ .suspend = snd_atmel_ac97_suspend,
|
|
+ .resume = snd_atmel_ac97_resume,
|
|
+};
|
|
+
|
|
+static int __init atmel_ac97_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&atmel_ac97_driver,
|
|
+ snd_atmel_ac97_probe);
|
|
+}
|
|
+module_init(atmel_ac97_init);
|
|
+
|
|
+static void __exit atmel_ac97_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&atmel_ac97_driver);
|
|
+}
|
|
+module_exit(atmel_ac97_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
|
|
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
|
|
diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
|
|
new file mode 100644
|
|
index 0000000..96246e7
|
|
--- /dev/null
|
|
+++ b/sound/avr32/ac97c.h
|
|
@@ -0,0 +1,71 @@
|
|
+/*
|
|
+ * Register definitions for the Atmel AC97 Controller.
|
|
+ *
|
|
+ * Copyright (C) 2005-2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#ifndef __SOUND_AVR32_AC97C_H
|
|
+#define __SOUND_AVR32_AC97C_H
|
|
+
|
|
+#define AC97C_MR 0x08
|
|
+#define AC97C_ICA 0x10
|
|
+#define AC97C_OCA 0x14
|
|
+#define AC97C_CARHR 0x20
|
|
+#define AC97C_CATHR 0x24
|
|
+#define AC97C_CASR 0x28
|
|
+#define AC97C_CAMR 0x2c
|
|
+#define AC97C_CBRHR 0x30
|
|
+#define AC97C_CBTHR 0x34
|
|
+#define AC97C_CBSR 0x38
|
|
+#define AC97C_CBMR 0x3c
|
|
+#define AC97C_CORHR 0x40
|
|
+#define AC97C_COTHR 0x44
|
|
+#define AC97C_COSR 0x48
|
|
+#define AC97C_COMR 0x4c
|
|
+#define AC97C_SR 0x50
|
|
+#define AC97C_IER 0x54
|
|
+#define AC97C_IDR 0x58
|
|
+#define AC97C_IMR 0x5c
|
|
+#define AC97C_VERSION 0xfc
|
|
+
|
|
+#define AC97C_CATPR PDC_TPR
|
|
+#define AC97C_CATCR PDC_TCR
|
|
+#define AC97C_CATNPR PDC_TNPR
|
|
+#define AC97C_CATNCR PDC_TNCR
|
|
+#define AC97C_CARPR PDC_RPR
|
|
+#define AC97C_CARCR PDC_RCR
|
|
+#define AC97C_CARNPR PDC_RNPR
|
|
+#define AC97C_CARNCR PDC_RNCR
|
|
+#define AC97C_PTCR PDC_PTCR
|
|
+
|
|
+#define AC97C_MR_ENA (1 << 0)
|
|
+#define AC97C_MR_WRST (1 << 1)
|
|
+#define AC97C_MR_VRA (1 << 2)
|
|
+
|
|
+#define AC97C_CSR_TXRDY (1 << 0)
|
|
+#define AC97C_CSR_UNRUN (1 << 2)
|
|
+#define AC97C_CSR_RXRDY (1 << 4)
|
|
+#define AC97C_CSR_ENDTX (1 << 10)
|
|
+#define AC97C_CSR_ENDRX (1 << 14)
|
|
+
|
|
+#define AC97C_CMR_SIZE_20 (0 << 16)
|
|
+#define AC97C_CMR_SIZE_18 (1 << 16)
|
|
+#define AC97C_CMR_SIZE_16 (2 << 16)
|
|
+#define AC97C_CMR_SIZE_10 (3 << 16)
|
|
+#define AC97C_CMR_CEM_LITTLE (1 << 18)
|
|
+#define AC97C_CMR_CEM_BIG (0 << 18)
|
|
+#define AC97C_CMR_CENA (1 << 21)
|
|
+#define AC97C_CMR_PDCEN (1 << 22)
|
|
+
|
|
+#define AC97C_SR_CAEVT (1 << 3)
|
|
+
|
|
+#define AC97C_CH_ASSIGN(slot, channel) \
|
|
+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
|
|
+#define AC97C_CHANNEL_NONE 0x0
|
|
+#define AC97C_CHANNEL_A 0x1
|
|
+#define AC97C_CHANNEL_B 0x2
|
|
+
|
|
+#endif /* __SOUND_AVR32_AC97C_H */
|
|
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
|
|
index 857008b..db69a17 100644
|
|
--- a/sound/oss/Kconfig
|
|
+++ b/sound/oss/Kconfig
|
|
@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
|
|
int "DAC channel"
|
|
default "1"
|
|
depends on SOUND_SH_DAC_AUDIO
|
|
+
|
|
+config SOUND_AT32_ABDAC
|
|
+ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
|
|
+ depends on SOUND_PRIME && AVR32
|
|
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
|
|
index f883c4b..a41853b 100644
|
|
--- a/sound/oss/Makefile
|
|
+++ b/sound/oss/Makefile
|
|
@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232) += cs4232.o ad1848.o
|
|
|
|
# Please leave it as is, cause the link order is significant !
|
|
|
|
+obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
|
|
obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
|
|
obj-$(CONFIG_SOUND_HAL2) += hal2.o
|
|
obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
|
|
diff --git a/sound/oss/at32_abdac.c b/sound/oss/at32_abdac.c
|
|
new file mode 100644
|
|
index 0000000..cb997d7
|
|
--- /dev/null
|
|
+++ b/sound/oss/at32_abdac.c
|
|
@@ -0,0 +1,722 @@
|
|
+/*
|
|
+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
|
|
+ *
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#include <linux/clk.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/fs.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/sound.h>
|
|
+#include <linux/soundcard.h>
|
|
+
|
|
+#include <asm/byteorder.h>
|
|
+#include <asm/dma-controller.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/uaccess.h>
|
|
+
|
|
+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
|
|
+#include <linux/byteorder/swabb.h>
|
|
+
|
|
+#include "at32_abdac.h"
|
|
+
|
|
+#define DMA_BUFFER_SIZE 32768
|
|
+#define DMA_PERIOD_SHIFT 10
|
|
+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
|
|
+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
|
|
+
|
|
+struct sound_settings {
|
|
+ unsigned int format;
|
|
+ unsigned int channels;
|
|
+ unsigned int sample_rate;
|
|
+ /* log2(bytes per sample) */
|
|
+ unsigned int input_order;
|
|
+};
|
|
+
|
|
+struct at32_dac {
|
|
+ spinlock_t lock;
|
|
+ void __iomem *regs;
|
|
+
|
|
+ /* head and tail refer to number of words */
|
|
+ struct {
|
|
+ u32 *buf;
|
|
+ int head;
|
|
+ int tail;
|
|
+ } dma;
|
|
+
|
|
+ struct semaphore sem;
|
|
+ wait_queue_head_t write_wait;
|
|
+
|
|
+ /*
|
|
+ * Read at most ucount bytes from ubuf, translate to 2-channel
|
|
+ * signed 16-bit big endian format and write to the DMA buffer
|
|
+ * as long as there is room left. Return the number of bytes
|
|
+ * successfully copied from ubuf, or -EFAULT if the first
|
|
+ * sample from ubuf couldn't be read. This function is not
|
|
+ * called unless there is room for at least one sample (4
|
|
+ * bytes) in the DMA buffer.
|
|
+ */
|
|
+ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
|
|
+ size_t ucount);
|
|
+
|
|
+ struct sound_settings dsp_settings;
|
|
+ struct dma_request_cyclic req;
|
|
+
|
|
+ struct clk *mck;
|
|
+ struct clk *sample_clk;
|
|
+ struct platform_device *pdev;
|
|
+ int busy;
|
|
+ int playing;
|
|
+ int dev_dsp;
|
|
+};
|
|
+static struct at32_dac *the_dac;
|
|
+
|
|
+static inline unsigned int abdac_get_head(struct at32_dac *dac)
|
|
+{
|
|
+ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
|
|
+}
|
|
+
|
|
+static inline unsigned int abdac_get_tail(struct at32_dac *dac)
|
|
+{
|
|
+ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
|
|
+}
|
|
+
|
|
+static inline unsigned int abdac_dma_space(struct at32_dac *dac)
|
|
+{
|
|
+ unsigned int space;
|
|
+
|
|
+ space = ((dac->dma.tail - dac->dma.head - 1)
|
|
+ & ((DMA_BUFFER_SIZE / 4) - 1));
|
|
+ return space;
|
|
+}
|
|
+
|
|
+static void abdac_update_dma_tail(struct at32_dac *dac)
|
|
+{
|
|
+ dma_addr_t dma_addr;
|
|
+ unsigned int new_tail;
|
|
+
|
|
+ if (dac->playing) {
|
|
+ dma_addr = dma_get_current_pos(dac->req.req.dmac,
|
|
+ dac->req.req.channel);
|
|
+ new_tail = (dma_addr - dac->req.buffer_start) / 4;
|
|
+ if (new_tail >= dac->dma.head
|
|
+ && (dac->dma.tail < dac->dma.head
|
|
+ || dac->dma.tail > new_tail))
|
|
+ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
|
|
+ dac->dma.tail = new_tail;
|
|
+ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
|
|
+ dma_addr, dac->req.buffer_start, dac->dma.tail);
|
|
+ }
|
|
+}
|
|
+
|
|
+static int abdac_start(struct at32_dac *dac)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ if (dac->playing)
|
|
+ return 0;
|
|
+
|
|
+ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
|
|
+
|
|
+ clk_enable(dac->sample_clk);
|
|
+
|
|
+ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
|
|
+ if (ret)
|
|
+ goto out_stop_clock;
|
|
+
|
|
+ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
|
|
+ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
|
|
+ if (ret)
|
|
+ goto out_stop_request;
|
|
+
|
|
+ dac_writel(dac, CTRL, DAC_BIT(EN));
|
|
+ dac->playing = 1;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_stop_request:
|
|
+ dma_stop_request(dac->req.req.dmac,
|
|
+ dac->req.req.channel);
|
|
+out_stop_clock:
|
|
+ clk_disable(dac->sample_clk);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int abdac_stop(struct at32_dac *dac)
|
|
+{
|
|
+ if (dac->playing) {
|
|
+ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
|
|
+ dac_writel(dac, DATA, 0);
|
|
+ dac_writel(dac, CTRL, 0);
|
|
+ dac->playing = 0;
|
|
+ clk_disable(dac->sample_clk);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int abdac_dma_prepare(struct at32_dac *dac)
|
|
+{
|
|
+ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
|
|
+ &dac->req.buffer_start, GFP_KERNEL);
|
|
+ if (!dac->dma.buf)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ dac->dma.head = dac->dma.tail = 0;
|
|
+ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
|
|
+ dac->req.buffer_size = DMA_BUFFER_SIZE;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void abdac_dma_cleanup(struct at32_dac *dac)
|
|
+{
|
|
+ if (dac->dma.buf)
|
|
+ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
|
|
+ dac->dma.buf, dac->req.buffer_start);
|
|
+ dac->dma.buf = NULL;
|
|
+}
|
|
+
|
|
+static void abdac_dma_block_complete(struct dma_request *req)
|
|
+{
|
|
+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
|
|
+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
|
|
+
|
|
+ wake_up(&dac->write_wait);
|
|
+}
|
|
+
|
|
+static void abdac_dma_error(struct dma_request *req)
|
|
+{
|
|
+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
|
|
+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
|
|
+
|
|
+ dev_err(&dac->pdev->dev, "DMA error\n");
|
|
+}
|
|
+
|
|
+static irqreturn_t abdac_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct at32_dac *dac = dev_id;
|
|
+ u32 status;
|
|
+
|
|
+ status = dac_readl(dac, INT_STATUS);
|
|
+ if (status & DAC_BIT(UNDERRUN)) {
|
|
+ dev_err(&dac->pdev->dev, "Underrun detected!\n");
|
|
+ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
|
|
+ } else {
|
|
+ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
|
|
+ status);
|
|
+ dac_writel(dac, INT_CLR, status);
|
|
+ }
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
|
|
+ size_t ucount)
|
|
+{
|
|
+ ssize_t ret;
|
|
+
|
|
+ if (dac->dsp_settings.channels == 2) {
|
|
+ const u32 __user *up = (const u32 __user *)ubuf;
|
|
+ u32 sample;
|
|
+
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
|
|
+ if (!abdac_dma_space(dac))
|
|
+ break;
|
|
+
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
+ if (ret == 0)
|
|
+ ret = -EFAULT;
|
|
+ break;
|
|
+ }
|
|
+ dac->dma.buf[abdac_get_head(dac)] = sample;
|
|
+ dac->dma.head++;
|
|
+ }
|
|
+ } else {
|
|
+ const u16 __user *up = (const u16 __user *)ubuf;
|
|
+ u16 sample;
|
|
+
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
|
|
+ if (!abdac_dma_space(dac))
|
|
+ break;
|
|
+
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
+ if (ret == 0)
|
|
+ ret = -EFAULT;
|
|
+ break;
|
|
+ }
|
|
+ dac->dma.buf[abdac_get_head(dac)]
|
|
+ = (sample << 16) | sample;
|
|
+ dac->dma.head++;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
|
|
+ size_t ucount)
|
|
+{
|
|
+ ssize_t ret;
|
|
+
|
|
+ if (dac->dsp_settings.channels == 2) {
|
|
+ const u32 __user *up = (const u32 __user *)ubuf;
|
|
+ u32 sample;
|
|
+
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
|
|
+ if (!abdac_dma_space(dac))
|
|
+ break;
|
|
+
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
+ if (ret == 0)
|
|
+ ret = -EFAULT;
|
|
+ break;
|
|
+ }
|
|
+ /* Swap bytes in each halfword */
|
|
+ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
|
|
+ dac->dma.head++;
|
|
+ }
|
|
+ } else {
|
|
+ const u16 __user *up = (const u16 __user *)ubuf;
|
|
+ u16 sample;
|
|
+
|
|
+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
|
|
+ if (!abdac_dma_space(dac))
|
|
+ break;
|
|
+
|
|
+ if (unlikely(__get_user(sample, up++))) {
|
|
+ if (ret == 0)
|
|
+ ret = -EFAULT;
|
|
+ break;
|
|
+ }
|
|
+ sample = swab16(sample);
|
|
+ dac->dma.buf[abdac_get_head(dac)]
|
|
+ = (sample << 16) | sample;
|
|
+ dac->dma.head++;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
|
|
+ const char __user *buffer,
|
|
+ size_t count)
|
|
+{
|
|
+ /* At least one buffer must be available at this point */
|
|
+ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
|
|
+
|
|
+ return dac->trans(dac, buffer, count);
|
|
+}
|
|
+
|
|
+static int abdac_set_format(struct at32_dac *dac, int format)
|
|
+{
|
|
+ unsigned int order;
|
|
+
|
|
+ switch (format) {
|
|
+ case AFMT_S16_BE:
|
|
+ order = 1;
|
|
+ dac->trans = trans_s16be;
|
|
+ break;
|
|
+ case AFMT_S16_LE:
|
|
+ order = 1;
|
|
+ dac->trans = trans_s16le;
|
|
+ break;
|
|
+ default:
|
|
+ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ if (dac->dsp_settings.channels == 2)
|
|
+ order++;
|
|
+
|
|
+ dac->dsp_settings.input_order = order;
|
|
+ dac->dsp_settings.format = format;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
|
|
+{
|
|
+ unsigned long new_rate;
|
|
+ int ret;
|
|
+
|
|
+ ret = clk_set_rate(dac->sample_clk, 256 * rate);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
+ /* TODO: mplayer seems to have a problem with this */
|
|
+#if 0
|
|
+ new_rate = clk_get_rate(dac->sample_clk);
|
|
+ dac->dsp_settings.sample_rate = new_rate / 256;
|
|
+#else
|
|
+ dac->dsp_settings.sample_rate = rate;
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static ssize_t abdac_dsp_write(struct file *file,
|
|
+ const char __user *buffer,
|
|
+ size_t count, loff_t *ppos)
|
|
+{
|
|
+ struct at32_dac *dac = file->private_data;
|
|
+ DECLARE_WAITQUEUE(wait, current);
|
|
+ unsigned int avail;
|
|
+ ssize_t copied;
|
|
+ ssize_t ret;
|
|
+
|
|
+ /* Avoid address space checking in the translation functions */
|
|
+ if (!access_ok(buffer, count, VERIFY_READ))
|
|
+ return -EFAULT;
|
|
+
|
|
+ down(&dac->sem);
|
|
+
|
|
+ if (!dac->dma.buf) {
|
|
+ ret = abdac_dma_prepare(dac);
|
|
+ if (ret)
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ add_wait_queue(&dac->write_wait, &wait);
|
|
+ ret = 0;
|
|
+ while (count > 0) {
|
|
+ do {
|
|
+ abdac_update_dma_tail(dac);
|
|
+ avail = abdac_dma_space(dac);
|
|
+ set_current_state(TASK_INTERRUPTIBLE);
|
|
+ if (avail >= DMA_WRITE_THRESHOLD)
|
|
+ break;
|
|
+
|
|
+ if (file->f_flags & O_NONBLOCK) {
|
|
+ if (!ret)
|
|
+ ret = -EAGAIN;
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ pr_debug("Going to wait (avail = %u, count = %zu)\n",
|
|
+ avail, count);
|
|
+
|
|
+ up(&dac->sem);
|
|
+ schedule();
|
|
+ if (signal_pending(current)) {
|
|
+ if (!ret)
|
|
+ ret = -ERESTARTSYS;
|
|
+ goto out_nosem;
|
|
+ }
|
|
+ down(&dac->sem);
|
|
+ } while (1);
|
|
+
|
|
+ copied = abdac_dma_translate_from_user(dac, buffer, count);
|
|
+ if (copied < 0) {
|
|
+ if (!ret)
|
|
+ ret = -EFAULT;
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ abdac_start(dac);
|
|
+
|
|
+ count -= copied;
|
|
+ ret += copied;
|
|
+ }
|
|
+
|
|
+out:
|
|
+ up(&dac->sem);
|
|
+out_nosem:
|
|
+ remove_wait_queue(&dac->write_wait, &wait);
|
|
+ set_current_state(TASK_RUNNING);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
|
|
+ unsigned int cmd, unsigned long arg)
|
|
+{
|
|
+ struct at32_dac *dac = file->private_data;
|
|
+ int __user *up = (int __user *)arg;
|
|
+ struct audio_buf_info abinfo;
|
|
+ int val, ret;
|
|
+
|
|
+ switch (cmd) {
|
|
+ case OSS_GETVERSION:
|
|
+ return put_user(SOUND_VERSION, up);
|
|
+
|
|
+ case SNDCTL_DSP_SPEED:
|
|
+ if (get_user(val, up))
|
|
+ return -EFAULT;
|
|
+ if (val >= 0) {
|
|
+ abdac_stop(dac);
|
|
+ ret = abdac_set_sample_rate(dac, val);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ }
|
|
+ return put_user(dac->dsp_settings.sample_rate, up);
|
|
+
|
|
+ case SNDCTL_DSP_STEREO:
|
|
+ if (get_user(val, up))
|
|
+ return -EFAULT;
|
|
+ abdac_stop(dac);
|
|
+ if (val && dac->dsp_settings.channels == 1)
|
|
+ dac->dsp_settings.input_order++;
|
|
+ else if (!val && dac->dsp_settings.channels != 1)
|
|
+ dac->dsp_settings.input_order--;
|
|
+ dac->dsp_settings.channels = val ? 2 : 1;
|
|
+ return 0;
|
|
+
|
|
+ case SNDCTL_DSP_CHANNELS:
|
|
+ if (get_user(val, up))
|
|
+ return -EFAULT;
|
|
+
|
|
+ if (val) {
|
|
+ if (val < 0 || val > 2)
|
|
+ return -EINVAL;
|
|
+
|
|
+ abdac_stop(dac);
|
|
+ dac->dsp_settings.input_order
|
|
+ += val - dac->dsp_settings.channels;
|
|
+ dac->dsp_settings.channels = val;
|
|
+ }
|
|
+ return put_user(val, (int *)arg);
|
|
+
|
|
+ case SNDCTL_DSP_GETFMTS:
|
|
+ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
|
|
+
|
|
+ case SNDCTL_DSP_SETFMT:
|
|
+ if (get_user(val, up))
|
|
+ return -EFAULT;
|
|
+
|
|
+ if (val == AFMT_QUERY) {
|
|
+ val = dac->dsp_settings.format;
|
|
+ } else {
|
|
+ ret = abdac_set_format(dac, val);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ }
|
|
+ return put_user(val, up);
|
|
+
|
|
+ case SNDCTL_DSP_GETOSPACE:
|
|
+ abdac_update_dma_tail(dac);
|
|
+ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
|
|
+ * (DMA_PERIOD_SIZE / 4));
|
|
+ abinfo.bytes = (abdac_dma_space(dac)
|
|
+ << dac->dsp_settings.input_order);
|
|
+ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
|
|
+ >> (DMA_PERIOD_SHIFT
|
|
+ + dac->dsp_settings.input_order));
|
|
+ abinfo.fragments = ((abinfo.bytes
|
|
+ >> dac->dsp_settings.input_order)
|
|
+ / (DMA_PERIOD_SIZE / 4));
|
|
+ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
|
|
+ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
|
|
+ abinfo.bytes);
|
|
+ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
|
|
+
|
|
+ default:
|
|
+ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
|
|
+ return -EINVAL;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int abdac_dsp_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ struct at32_dac *dac = the_dac;
|
|
+ int ret;
|
|
+
|
|
+ if (file->f_mode & FMODE_READ)
|
|
+ return -ENXIO;
|
|
+
|
|
+ down(&dac->sem);
|
|
+ ret = -EBUSY;
|
|
+ if (dac->busy)
|
|
+ goto out;
|
|
+
|
|
+ dac->dma.head = dac->dma.tail = 0;
|
|
+
|
|
+ /* FIXME: What are the correct defaults? */
|
|
+ dac->dsp_settings.channels = 2;
|
|
+ abdac_set_format(dac, AFMT_S16_BE);
|
|
+ ret = abdac_set_sample_rate(dac, 8000);
|
|
+ if (ret)
|
|
+ goto out;
|
|
+
|
|
+ file->private_data = dac;
|
|
+ dac->busy = 1;
|
|
+
|
|
+ ret = 0;
|
|
+
|
|
+out:
|
|
+ up(&dac->sem);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int abdac_dsp_release(struct inode *inode, struct file *file)
|
|
+{
|
|
+ struct at32_dac *dac = file->private_data;
|
|
+
|
|
+ down(&dac->sem);
|
|
+
|
|
+ abdac_stop(dac);
|
|
+ abdac_dma_cleanup(dac);
|
|
+ dac->busy = 0;
|
|
+
|
|
+ up(&dac->sem);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct file_operations abdac_dsp_fops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .llseek = no_llseek,
|
|
+ .write = abdac_dsp_write,
|
|
+ .ioctl = abdac_dsp_ioctl,
|
|
+ .open = abdac_dsp_open,
|
|
+ .release = abdac_dsp_release,
|
|
+};
|
|
+
|
|
+static int __init abdac_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct at32_dac *dac;
|
|
+ struct resource *regs;
|
|
+ struct clk *mck;
|
|
+ struct clk *sample_clk;
|
|
+ int irq;
|
|
+ int ret;
|
|
+
|
|
+ if (the_dac)
|
|
+ return -EBUSY;
|
|
+
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!regs)
|
|
+ return -ENXIO;
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
+ if (irq < 0)
|
|
+ return irq;
|
|
+
|
|
+ mck = clk_get(&pdev->dev, "pclk");
|
|
+ if (IS_ERR(mck))
|
|
+ return PTR_ERR(mck);
|
|
+ sample_clk = clk_get(&pdev->dev, "sample_clk");
|
|
+ if (IS_ERR(sample_clk)) {
|
|
+ ret = PTR_ERR(sample_clk);
|
|
+ goto out_put_mck;
|
|
+ }
|
|
+ clk_enable(mck);
|
|
+
|
|
+ ret = -ENOMEM;
|
|
+ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
|
|
+ if (!dac)
|
|
+ goto out_disable_clk;
|
|
+
|
|
+ spin_lock_init(&dac->lock);
|
|
+ init_MUTEX(&dac->sem);
|
|
+ init_waitqueue_head(&dac->write_wait);
|
|
+ dac->pdev = pdev;
|
|
+ dac->mck = mck;
|
|
+ dac->sample_clk = sample_clk;
|
|
+
|
|
+ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
+ if (!dac->regs)
|
|
+ goto out_free_dac;
|
|
+
|
|
+ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
|
|
+ if (ret)
|
|
+ goto out_unmap_regs;
|
|
+
|
|
+ /* FIXME */
|
|
+ dac->req.req.dmac = find_dma_controller(0);
|
|
+ if (!dac->req.req.dmac)
|
|
+ goto out_free_irq;
|
|
+
|
|
+ ret = dma_alloc_channel(dac->req.req.dmac);
|
|
+ if (ret < 0)
|
|
+ goto out_free_irq;
|
|
+
|
|
+ dac->req.req.channel = ret;
|
|
+ dac->req.req.block_complete = abdac_dma_block_complete;
|
|
+ dac->req.req.error = abdac_dma_error;
|
|
+ dac->req.data_reg = regs->start + DAC_DATA;
|
|
+ dac->req.periph_id = 2; /* FIXME */
|
|
+ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
|
|
+ dac->req.width = DMA_WIDTH_32BIT;
|
|
+
|
|
+ /* Make sure the DAC is silent and disabled */
|
|
+ dac_writel(dac, DATA, 0);
|
|
+ dac_writel(dac, CTRL, 0);
|
|
+
|
|
+ ret = register_sound_dsp(&abdac_dsp_fops, -1);
|
|
+ if (ret < 0)
|
|
+ goto out_free_dma;
|
|
+ dac->dev_dsp = ret;
|
|
+
|
|
+ /* TODO: Register mixer */
|
|
+
|
|
+ the_dac = dac;
|
|
+ platform_set_drvdata(pdev, dac);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+out_free_dma:
|
|
+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
|
|
+out_free_irq:
|
|
+ free_irq(irq, dac);
|
|
+out_unmap_regs:
|
|
+ iounmap(dac->regs);
|
|
+out_free_dac:
|
|
+ kfree(dac);
|
|
+out_disable_clk:
|
|
+ clk_disable(mck);
|
|
+ clk_put(sample_clk);
|
|
+out_put_mck:
|
|
+ clk_put(mck);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __exit abdac_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct at32_dac *dac;
|
|
+
|
|
+ dac = platform_get_drvdata(pdev);
|
|
+ if (dac) {
|
|
+ unregister_sound_dsp(dac->dev_dsp);
|
|
+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
|
|
+ free_irq(platform_get_irq(pdev, 0), dac);
|
|
+ iounmap(dac->regs);
|
|
+ clk_disable(dac->mck);
|
|
+ clk_put(dac->sample_clk);
|
|
+ clk_put(dac->mck);
|
|
+ kfree(dac);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ the_dac = NULL;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver abdac_driver = {
|
|
+ .remove = __exit_p(abdac_remove),
|
|
+ .driver = {
|
|
+ .name = "abdac",
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init abdac_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&abdac_driver, abdac_probe);
|
|
+}
|
|
+module_init(abdac_init);
|
|
+
|
|
+static void __exit abdac_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&abdac_driver);
|
|
+}
|
|
+module_exit(abdac_exit);
|
|
+
|
|
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
|
|
+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
|
|
+MODULE_LICENSE("GPL");
|
|
diff --git a/sound/oss/at32_abdac.h b/sound/oss/at32_abdac.h
|
|
new file mode 100644
|
|
index 0000000..3c88e25
|
|
--- /dev/null
|
|
+++ b/sound/oss/at32_abdac.h
|
|
@@ -0,0 +1,59 @@
|
|
+/*
|
|
+ * Register definitions for the Atmel AT32 on-chip DAC.
|
|
+ *
|
|
+ * Copyright (C) 2006 Atmel Corporation
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+#ifndef __SOUND_OSS_AT32_ABDAC_H__
|
|
+#define __SOUND_OSS_AT32_ABDAC_H__
|
|
+
|
|
+/* DAC register offsets */
|
|
+#define DAC_DATA 0x0000
|
|
+#define DAC_CTRL 0x0008
|
|
+#define DAC_INT_MASK 0x000c
|
|
+#define DAC_INT_EN 0x0010
|
|
+#define DAC_INT_DIS 0x0014
|
|
+#define DAC_INT_CLR 0x0018
|
|
+#define DAC_INT_STATUS 0x001c
|
|
+#define DAC_PDC_DATA 0x0020
|
|
+
|
|
+/* Bitfields in CTRL */
|
|
+#define DAC_SWAP_OFFSET 30
|
|
+#define DAC_SWAP_SIZE 1
|
|
+#define DAC_EN_OFFSET 31
|
|
+#define DAC_EN_SIZE 1
|
|
+
|
|
+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
|
|
+#define DAC_UNDERRUN_OFFSET 28
|
|
+#define DAC_UNDERRUN_SIZE 1
|
|
+#define DAC_TX_READY_OFFSET 29
|
|
+#define DAC_TX_READY_SIZE 1
|
|
+#define DAC_TX_BUFFER_EMPTY_OFFSET 30
|
|
+#define DAC_TX_BUFFER_EMPTY_SIZE 1
|
|
+#define DAC_CHANNEL_TX_END_OFFSET 31
|
|
+#define DAC_CHANNEL_TX_END_SIZE 1
|
|
+
|
|
+/* Bit manipulation macros */
|
|
+#define DAC_BIT(name) \
|
|
+ (1 << DAC_##name##_OFFSET)
|
|
+#define DAC_BF(name, value) \
|
|
+ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
|
|
+ << DAC_##name##_OFFSET)
|
|
+#define DAC_BFEXT(name, value) \
|
|
+ (((value) >> DAC_##name##_OFFSET) \
|
|
+ & ((1 << DAC_##name##_SIZE) - 1))
|
|
+#define DAC_BFINS(name, value, old) \
|
|
+ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
|
|
+ << DAC_##name##_OFFSET)) \
|
|
+ | DAC_BF(name,value))
|
|
+
|
|
+/* Register access macros */
|
|
+#define dac_readl(port, reg) \
|
|
+ __raw_readl((port)->regs + DAC_##reg)
|
|
+#define dac_writel(port, reg, value) \
|
|
+ __raw_writel((value), (port)->regs + DAC_##reg)
|
|
+
|
|
+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
|