openwrtv3/target/linux/ipq806x/patches-4.4/096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch
Kevin Darbyshire-Bryant 102cb4742c kernel: bump to 4.4.35
Refresh patches on all 4.4 supported platforms.

077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch
removed as now upstream.

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-11-29 21:12:08 +01:00

68 lines
2 KiB
Diff

From 77966eb85e6d988a6daaf8ac14ac33026ceb3ab7 Mon Sep 17 00:00:00 2001
From: John Youn <John.Youn@synopsys.com>
Date: Fri, 19 Feb 2016 17:31:01 -0800
Subject: usb: dwc3: Validate the maximum_speed parameter
Check that dwc->maximum_speed is set to a valid value. Also add an error
when we use it later if we encounter an invalid value.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
---
drivers/usb/dwc3/core.c | 18 ++++++++++++++++--
drivers/usb/dwc3/gadget.c | 9 ++++++---
2 files changed, 22 insertions(+), 5 deletions(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1012,8 +1012,20 @@ static int dwc3_probe(struct platform_de
goto err1;
}
- /* default to superspeed if no maximum_speed passed */
- if (dwc->maximum_speed == USB_SPEED_UNKNOWN) {
+ /* Check the maximum_speed parameter */
+ switch (dwc->maximum_speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
+ break;
+ default:
+ dev_err(dev, "invalid maximum_speed parameter %d\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_UNKNOWN:
+ /* default to superspeed */
dwc->maximum_speed = USB_SPEED_SUPER;
/*
@@ -1023,6 +1035,8 @@ static int dwc3_probe(struct platform_de
(DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+
+ break;
}
/* Adjust Frame Length */
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1634,10 +1634,13 @@ static int dwc3_gadget_start(struct usb_
case USB_SPEED_HIGH:
reg |= DWC3_DSTS_HIGHSPEED;
break;
- case USB_SPEED_SUPER: /* FALLTHROUGH */
- case USB_SPEED_UNKNOWN: /* FALTHROUGH */
default:
- reg |= DWC3_DSTS_SUPERSPEED;
+ dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
+ dwc->maximum_speed);
+ /* fall through */
+ case USB_SPEED_SUPER:
+ reg |= DWC3_DCFG_SUPERSPEED;
+ break;
}
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);