openwrtv3/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00

37 lines
1.2 KiB
Diff

From 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 25 Nov 2013 22:15:20 +0100
Subject: [PATCH] can: flexcan: use correct clock as base for bit rate
calculation
The flexcan IP core uses the peripheral clock ("per") as basic clock for the
bit timing calculation. However the driver uses the the wrong clock ("ipg").
This leads to wrong bit rates if the rates on both clock are different.
This patch fixes the problem by using the correct clock for the bit rate
calculation.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/flexcan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1021,7 +1021,6 @@ static int flexcan_probe(struct platform
err = PTR_ERR(clk_ipg);
goto failed_clock;
}
- clock_freq = clk_get_rate(clk_ipg);
clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(clk_per)) {
@@ -1029,6 +1028,7 @@ static int flexcan_probe(struct platform
err = PTR_ERR(clk_per);
goto failed_clock;
}
+ clock_freq = clk_get_rate(clk_per);
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);