openwrtv3/target/linux/lantiq/dts/ARV4510PW.dts
Hauke Mehrtens d8dde8c517 lantiq: fix console print
The boot loader of many boards provides a kernel boot argument with a
broken console parameter to the kernel. This will be taken before the
stdout-path defined in device tree and the serial will not work on this
board. Multiple boards are affected by this problem, so revert this
patch for all boards. Later we can remove the boot arguments from the
device tree again, after the individual board was checked to work.

This partly reverts this commit:
commit 4995c64857
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Sun Dec 11 21:55:00 2016 +0100

    lantiq: specify console using stdout-path instead of cmdline argument

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-05 23:10:44 +01:00

231 lines
4.1 KiB
Text

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ARV4510PW - Wippies, Elisa";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power;
led-failsafe = &power2;
led-running = &power;
led-dsl = &adsl;
led-internet = &internet;
led-usb = &usb;
led-usb2 = &usb2;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
lantiq,noxip;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu a23";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
exin {
lantiq,groups = "exin1", "exin2";
lantiq,function = "exin";
lantiq,output = <0>;
};
pci_in {
lantiq,groups = "req1", "req2";
lantiq,function = "pci";
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1", "gnt2";
lantiq,function = "pci";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
buttons {
lantiq,pins = "io3", "io14";
lantiq,pull = <2>;
lantiq,output = <0>;
};
};
};
gpios: stp@E100BB0 {
status = "okay";
lantiq,groups = <0x7>;
};
etop@E180000 {
phy-mode = "rmii";
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
interrupt-map = <
0x6000 0 0 1 &icu0 135
0x7800 0 0 1 &icu0 66
0x7800 0 0 2 &icu0 66
0x7800 0 0 3 &icu0 66
>;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0x7>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "power";
gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
power2: power2 {
label = "power2";
gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
};
lan1 {
label = "lan1";
gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
};
lan2 {
label = "lan2";
gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
};
lan3 {
label = "lan3";
gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
};
lan4 {
label = "lan4";
gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
};
wifi: wifi {
label = "wifi";
gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
};
adsl: adsl {
label = "adsl";
gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
};
internet: internet {
label = "internet";
gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
};
internet2 {
label = "internet2";
gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
};
voip {
label = "voip";
gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
};
phone {
label = "phone";
gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
};
phone2 {
label = "phone2";
gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
};
usb: usb {
label = "usb";
gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
};
usb2: usb2 {
label = "usb2";
gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "usb3";
gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
};
unlabeled {
label = "unlabeled";
gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
};
};
};