openwrtv3/target/linux/ramips/dts/WIZFI630A.dts
Álvaro Fernández Rojas 021c893658 ramips: fix size-cells on spi nodes
size-cells should be 0 in order to avoid dummy values in reg properties.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-18 16:57:39 +02:00

184 lines
2.8 KiB
Text

/dts-v1/;
#include "rt5350.dtsi"
/ {
compatible = "wizfi630a", "ralink,rt5350-soc";
model = "WIZnet WizFi630A";
chosen {
bootargs = "console=ttyS1,115200";
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
};
gpio-leds {
compatible = "gpio-leds";
run {
label = "wizfi630a::run";
gpios = <&gpio0 1 1>;
};
wps {
label = "wizfi630a::wps";
gpios = <&gpio0 20 1>;
};
uart1 {
label = "wizfi630a::uart1";
gpios = <&gpio0 18 1>;
};
uart2 {
label = "wizfi630a::uart2";
gpios = <&gpio0 21 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 17 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
scm1 {
label = "SCM1";
gpios = <&gpio0 19 1>;
linux,code = <0x100>;
};
scm2 {
label = "SCM2";
gpios = <&gpio0 2 1>;
linux,code = <0x101>;
};
};
};
&gpio1 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
partition@0 {
#size-cells = <1>;
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
#size-cells = <1>;
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
#size-cells = <1>;
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
#size-cells = <1>;
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&uart {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
resets = <&rstctrl 12>;
reset-names = "uart";
interrupt-parent = <&intc>;
interrupts = <5>;
reg-shift = <2>;
pinctrl-names = "default";
pinctrl-0 = <&uartf_pins>;
status = "okay";
};
&uartlite {
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
resets = <&rstctrl 19>;
reset-names = "uartl";
interrupt-parent = <&intc>;
interrupts = <12>;
reg-shift = <2>;
pinctrl-names = "default";
pinctrl-0 = <&uartlite_pins>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag" ;
ralink,function = "gpio";
};
};
uartf_gpio_pins: uartf_gpio {
uartf_gpio {
ralink,group = "uartf";
ralink,function = "uartf";
};
};
uartlite_pins: uartlite {
uart {
ralink,group = "uartlite";
ralink,function = "uartlite";
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&esw {
mediatek,portmap = <0x17>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};