openwrtv3/package/boot/uboot-lantiq/patches/0100-MIPS-add-board-support-for-Easy-50712.patch
Mathias Kresin b3795d0c93 uboot-lantiq: reorder and rework patches
use:
  - 00nn for u-boot patches
  - 01nn for new boards

While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00

306 lines
9.7 KiB
Diff

--- /dev/null
+++ b/board/lantiq/easy50712/Makefile
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS = $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+++ b/board/lantiq/easy50712/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
--- /dev/null
+++ b/board/lantiq/easy50712/ddr_settings.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2007-2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#define MC_DC00_VALUE 0x1B1B
+#define MC_DC01_VALUE 0x0
+#define MC_DC02_VALUE 0x0
+#define MC_DC03_VALUE 0x0
+#define MC_DC04_VALUE 0x0
+#define MC_DC05_VALUE 0x200
+#define MC_DC06_VALUE 0x605
+#define MC_DC07_VALUE 0x303
+#define MC_DC08_VALUE 0x102
+#define MC_DC09_VALUE 0x70a
+#define MC_DC10_VALUE 0x203
+#define MC_DC11_VALUE 0xc02
+#define MC_DC12_VALUE 0x1C8
+#define MC_DC13_VALUE 0x1
+#define MC_DC14_VALUE 0x0
+#define MC_DC15_VALUE 0x13c
+#define MC_DC16_VALUE 0xC800
+#define MC_DC17_VALUE 0xd
+#define MC_DC18_VALUE 0x300
+#define MC_DC19_VALUE 0x200
+#define MC_DC20_VALUE 0xA04
+#define MC_DC21_VALUE 0xd00
+#define MC_DC22_VALUE 0xd0d
+#define MC_DC23_VALUE 0x0
+#define MC_DC24_VALUE 0x62
+#define MC_DC25_VALUE 0x0
+#define MC_DC26_VALUE 0x0
+#define MC_DC27_VALUE 0x0
+#define MC_DC28_VALUE 0x510
+#define MC_DC29_VALUE 0x2d89
+#define MC_DC30_VALUE 0x8300
+#define MC_DC31_VALUE 0x0
+#define MC_DC32_VALUE 0x0
+#define MC_DC33_VALUE 0x0
+#define MC_DC34_VALUE 0x0
+#define MC_DC35_VALUE 0x0
+#define MC_DC36_VALUE 0x0
+#define MC_DC37_VALUE 0x0
+#define MC_DC38_VALUE 0x0
+#define MC_DC39_VALUE 0x0
+#define MC_DC40_VALUE 0x0
+#define MC_DC41_VALUE 0x0
+#define MC_DC42_VALUE 0x0
+#define MC_DC43_VALUE 0x0
+#define MC_DC44_VALUE 0x0
+#define MC_DC45_VALUE 0x500
+#define MC_DC46_VALUE 0x0
--- /dev/null
+++ b/board/lantiq/easy50712/easy50712.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <switch.h>
+#include <spi.h>
+#include <asm/gpio.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/reset.h>
+#include <asm/lantiq/chipid.h>
+
+static void gpio_init(void)
+{
+ /* SPI/CS output (low-active) for serial flash */
+ gpio_direction_output(22, 1);
+
+ /* EBU.FL_CS1 as output for NAND CE */
+ gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* EBU.FL_A23 as output for NAND CLE */
+ gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+ /* EBU.FL_A24 as output for NAND ALE */
+ gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+
+ /* enable CLK_OUT2 for external switch */
+ gpio_set_altfunc(3, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+}
+
+int board_early_init_f(void)
+{
+ gpio_init();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: " CONFIG_BOARD_NAME "\n");
+ ltq_chip_print_info();
+
+ return 0;
+}
+
+static const struct ltq_eth_port_config eth_port_config[] = {
+ /* MAC0: Lantiq ADM6996I switch */
+ { 0, 0x0, LTQ_ETH_PORT_SWITCH, PHY_INTERFACE_MODE_RMII },
+};
+
+static const struct ltq_eth_board_config eth_board_config = {
+ .ports = eth_port_config,
+ .num_ports = ARRAY_SIZE(eth_port_config),
+};
+
+int board_eth_init(bd_t *bis)
+{
+ return ltq_eth_initialize(&eth_board_config);
+}
+
+static struct switch_device adm6996i_dev = {
+ .name = "adm6996i",
+ .cpu_port = 5,
+ .port_mask = 0xF,
+};
+
+int board_switch_init(void)
+{
+ /* Deactivate HRST line to release reset of ADM6996I switch */
+ ltq_reset_once(LTQ_RESET_HARD, 200000);
+
+ /* ADM6996I needs some time to come out of reset */
+ __udelay(50000);
+
+ return switch_device_register(&adm6996i_dev);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ if (bus)
+ return 0;
+
+ switch (cs) {
+ case 2:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 2:
+ gpio_set_value(22, 0);
+ break;
+ default:
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 2:
+ gpio_set_value(22, 1);
+ break;
+ default:
+ break;
+ }
+}
--- a/boards.cfg
+++ b/boards.cfg
@@ -502,6 +502,9 @@ Active mips mips32 au1x0
Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
+Active mips mips32 danube lantiq easy50712 easy50712_nor easy50712:SYS_BOOT_NOR Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Active mips mips32 danube lantiq easy50712 easy50712_norspl easy50712:SYS_BOOT_NORSPL Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Active mips mips32 danube lantiq easy50712 easy50712_ram easy50712:SYS_BOOT_RAM Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
--- /dev/null
+++ b/include/configs/easy50712.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2011-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MACH_TYPE "EASY50712"
+#define CONFIG_IDENT_STRING " "CONFIG_MACH_TYPE
+#define CONFIG_BOARD_NAME "Lantiq EASY50712 Danube Reference Board"
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART /* Enable ASC and UART */
+
+#define CONFIG_LTQ_SUPPORT_ETHERNET /* Enable ethernet */
+
+#define CONFIG_LTQ_SUPPORT_NOR_FLASH /* Have a parallel NOR flash */
+
+#define CONFIG_LTQ_SUPPORT_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL /* Have an AT45DB321D serial flash */
+
+#define CONFIG_LTQ_SUPPORT_NAND_FLASH
+
+#define CONFIG_LTQ_SUPPORT_SPL_NOR_FLASH /* Build NOR flash SPL */
+
+#define CONFIG_LTQ_SPL_COMP_LZO
+#define CONFIG_LTQ_SPL_CONSOLE
+
+/* Switch devices */
+#define CONFIG_SWITCH_MULTI
+#define CONFIG_SWITCH_ADM6996I
+
+/* Environment */
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 2
+#define CONFIG_ENV_SPI_MAX_HZ 20000000
+#define CONFIG_ENV_SPI_MODE 0
+
+#if defined(CONFIG_SYS_BOOT_NOR)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (256 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#elif defined(CONFIG_SYS_BOOT_NORSPL)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET (128 * 1024)
+#define CONFIG_ENV_SECT_SIZE (64 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
+
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONSOLE_ASC 1
+#define CONFIG_CONSOLE_DEV "ttyLTQ1"
+
+/* Pull in default board configs for Lantiq XWAY Danube */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
+/* Pull in default OpenWrt configs for Lantiq SoC */
+#include "openwrt-lantiq-common.h"
+
+#define CONFIG_ENV_UPDATE_UBOOT_NOR \
+ "update-uboot-nor=run load-uboot-norspl-lzo write-uboot-nor\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_ENV_LANTIQ_DEFAULTS \
+ CONFIG_ENV_UPDATE_UBOOT_NOR
+
+#endif /* __CONFIG_H */