KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ipq806x/patches/0001-ARM-dts-msm-split-out-msm8660-and-msm8960-soc-into-d.patch
John Crispin 3c1f6e358d ipq806x: Add support for IPQ806x chip family 
Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334
2014-08-30 09:32:58 +00:00

313 lines
7.7 KiB
Diff
Raw Blame History

From 3cdba35369b404875849008ea97cf1705e6060ed Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@codeaurora.org>
Date: Thu, 23 Jan 2014 14:09:54 -0600
Subject: [PATCH 001/182] ARM: dts: msm: split out msm8660 and msm8960 soc
into dts include
Pull the SoC device tree bits into their own files so other boards based
on these SoCs can include them and reduce duplication across a number of
boards.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
arch/arm/boot/dts/qcom-msm8660-surf.dts | 59 +-------------------------
arch/arm/boot/dts/qcom-msm8660.dtsi | 63 ++++++++++++++++++++++++++++
arch/arm/boot/dts/qcom-msm8960-cdp.dts | 66 +----------------------------
arch/arm/boot/dts/qcom-msm8960.dtsi | 70 +++++++++++++++++++++++++++++++
4 files changed, 135 insertions(+), 123 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-msm8660.dtsi
create mode 100644 arch/arm/boot/dts/qcom-msm8960.dtsi
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 68a72f5..169bad9 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,63 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include "qcom-msm8660.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2080000 {
- compatible = "qcom,msm-8660-qgic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02080000 0x1000 >,
- < 0x02081000 0x1000 >;
- };
-
- timer@2000000 {
- compatible = "qcom,scss-timer", "qcom,msm-timer";
- interrupts = <1 0 0x301>,
- <1 1 0x301>,
- <1 2 0x301>;
- reg = <0x02000000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x40000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- reg = <0x00800000 0x4000>;
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <173>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8660";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
new file mode 100644
index 0000000..69d6c4e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -0,0 +1,63 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+
+/ {
+ model = "Qualcomm MSM8660";
+ compatible = "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ timer@2000000 {
+ compatible = "qcom,scss-timer", "qcom,msm-timer";
+ interrupts = <1 0 0x301>,
+ <1 1 0x301>,
+ <1 2 0x301>;
+ reg = <0x02000000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ reg = <0x00800000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <173>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8660";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ serial@19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7c30de4..a58fb88 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,70 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include "qcom-msm8960.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02000000 0x1000 >,
- < 0x02002000 0x1000 >;
- };
-
- timer@200a000 {
- compatible = "qcom,kpss-timer", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>;
- reg = <0x0200a000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x80000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <150>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x800000 0x4000>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8960";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- clock-controller@4000000 {
- compatible = "qcom,mmcc-msm8960";
- reg = <0x4000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- serial@16440000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16440000 0x1000>,
- <0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
new file mode 100644
index 0000000..ff00282
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+
+/ {
+ model = "Qualcomm MSM8960";
+ compatible = "qcom,msm8960";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02000000 0x1000 >,
+ < 0x02002000 0x1000 >;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <150>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x800000 0x4000>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8960";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ clock-controller@4000000 {
+ compatible = "qcom,mmcc-msm8960";
+ reg = <0x4000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ serial@16440000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16440000 0x1000>,
+ <0x16400000 0x1000>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
--
1.7.10.4
Reference in a new issue View git blame Copy permalink