712ebe95f8
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ. Specifications: - SoC: Amazon-SE - RAM: 16MB - Storage: 4MB NOR FLash - LEDs: Power, Ethernet, DSL (Sync) - Buttons: 1x Reset Button (not currently supported, will be done) - 1x Ethernet-Port: 1x RJ45 10/100BaseTX - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+) Installation: - can be done via telnet+tftp or serial console - default passwords: - via telnet (root:admin) - via webinterface http://172.16.1.254:8235/ (admin:coolwhite) Installation via telnet / tftp: host: # your own host must have an tftpd daemon, then do this: host: ifconfig eth0:172 172.16.1.1 up host: # telnet to allnet modem, root:admin host: telnet 172.16.1.254 modem: # kill this daemon, it spams your console modem: killall dsl_cpe_control modem: # change to some place in ram: modem: cd /ramdisk/tftp_upload modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage modem: tftp -g -r uImage 172.16.1.1 modem: # load these extra tools from your tftpd via: modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz modem: tftp -g -r flashwrite 172.16.1.1 modem: tftp -g -r fw_setenv 172.16.1.1 modem: tftp -g -r fw.conf 172.16.1.1 modem: ln -s fw_setenv fw_printenv modem: chmod +x * modem: ./fw_setenv disable_recovery y modem: ./fw_setenv kernel_addr 0xb0010000 modem: ./flashwrite /dev/mtd/1 uImage 0 Installation via serial line at uboot: uboot: # erase everything exept bootloader uboot: protect on b0000000 +10000; protect on b03f0000 +10000 uboot: erase all uboot: # get new firmware via tftp: uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000 uboot: # copy to flash: uboot: cp.b 0x80100000 $(kernel_addr) $(filesize) uboot: # disable proprietary image checking: uboot: setenv disable_recovery=y; saveenv uboot: # reboot with LEDE ;) uboot: reset Ethernet works as expected, DSL syncronization does not work properly currently, I am working on this issue. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
78 lines
2 KiB
Bash
Executable file
78 lines
2 KiB
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2011-2015 OpenWrt.org
|
|
# based on ar71xx
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/lantiq.sh
|
|
|
|
board_config_update
|
|
|
|
led_wifi="$(lantiq_get_dt_led wifi)"
|
|
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
|
|
|
|
led_usb="$(lantiq_get_dt_led usb)"
|
|
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
|
|
|
|
led_usb2="$(lantiq_get_dt_led usb2)"
|
|
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
|
|
|
|
led_internet="$(lantiq_get_dt_led internet)"
|
|
[ -n "$led_internet" ] && {
|
|
interface="nas0"
|
|
lantiq_is_vdsl_system && interface="ptm0"
|
|
|
|
led_dsl="$(lantiq_get_dt_led dsl)"
|
|
[ -n "$led_dsl" ] && {
|
|
interface="pppoe-wan"
|
|
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
|
}
|
|
|
|
ucidef_set_led_netdev "internet" "internet" "$led_internet" "$interface"
|
|
}
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
ALL0333CJ)
|
|
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
|
|
;;
|
|
ARV4525PW)
|
|
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
|
|
;;
|
|
ARV7506PW11)
|
|
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
|
|
;;
|
|
ARV7519RW22)
|
|
ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
|
|
;;
|
|
BTHOMEHUBV5A)
|
|
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
|
|
;;
|
|
FRITZ7320)
|
|
ucidef_set_led_netdev "wifi" "wifi" "fritz7320:green:wlan" "wlan0"
|
|
;;
|
|
P2812HNUF*)
|
|
ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
|
|
;;
|
|
VGV7510KW22*)
|
|
ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio"
|
|
;;
|
|
VGV7519*)
|
|
ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio"
|
|
;;
|
|
WBMR300)
|
|
ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
|
|
ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
|
|
ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10"
|
|
ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
|
|
ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|