openwrtv3/target/linux/brcm63xx/dts/r5010unv2.dts
Jonas Gorski 474cde6123 brcm63xx: probe SPI flash through DT
Now that we support problem the SPI controllers through DT, we can also
probe flash through DT.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-04 11:33:44 +02:00

101 lines
1.7 KiB
Text

/dts-v1/;
#include "bcm6328.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "NuCom R5010UN v2";
compatible = "nucom,r5010unv2", "brcm,bcm6328";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&gpio0 23 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 24 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
inet_green {
label = "R5010UNv2:green:inet";
gpios = <&gpio0 1 1>;
};
inet_fail_red {
label = "R5010UNv2:red:inet-fail";
gpios = <&gpio0 2 1>;
};
dsl_red {
label = "R5010UNv2:green:dsl";
gpios = <&gpio0 3 1>;
};
power_green {
label = "R5010UNv2:green:power";
gpios = <&gpio0 4 1>;
default-state = "on";
};
power_fail_red {
label = "R5010UNv2:red:power-fail";
gpios = <&gpio0 5 1>;
};
wps_green {
label = "R5010UNv2:green:wps";
gpios = <&gpio0 10 1>;
};
usb_green {
label = "R5010UNv2:green:usb";
gpios = <&gpio0 11 1>;
};
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <16666667>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
linux,part-probe = "bcm63xxpart";
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0x7e0000>;
label = "linux";
};
nvram@7f0000 {
reg = <0x7f0000 0x010000>;
label = "nvram";
};
};
};