No description
Find a file
Felix Fietkau 5dc134c542 Fix VLYNQ device enable for DG834Gv1
This patch allows VLYNQ devices on the DG834Gv1 to be successfully
enabled.

Currently the "__vlynq_enable_device" function attempts to set the VLYNQ
device clock divisor to values from 1 through 8 until a link is
successfully established. On the DG834Gv1 (but not the DG834Gv2),
setting the VLYNQ device clock divisor to 1 (full rate) results in all
further VLYNQ operations failing (including software reset), so the
device is never enabled. This patches changes the function to only
attempt divisors 2 through 8, and hence the device is successfully
enabled.

Signed-off-by: Nick Forbes <nick.forbes@huntsworth.com>

---------

SVN-Revision: 9656
2007-12-04 12:49:54 +00:00
docs Allow specifying static IPv6 gateways (#2710) 2007-11-16 07:27:59 +00:00
include fix make clean for unconfigured build trees 2007-12-04 03:04:37 +00:00
package add i8x0 audio driver 2007-12-03 21:21:17 +00:00
scripts fix image names in arm-magic.sh (closes: #2682) 2007-11-11 13:37:37 +00:00
target Fix VLYNQ device enable for DG834Gv1 2007-12-04 12:49:54 +00:00
toolchain fix a few stampfile locations 2007-11-20 19:58:49 +00:00
tools fix another build issue on some osx machines - run ranlib on the lzma lib archive 2007-12-02 22:44:44 +00:00
.gitignore add package/feeds to .gitignore 2007-10-13 02:05:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add external kernel tree support 2007-11-20 13:21:01 +00:00
feeds.conf add initial version of a package feeds management script 2007-09-23 02:39:01 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile fix make clean for unconfigured build trees 2007-12-04 03:04:37 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
rules.mk fix hostapd rebuild check, isolate the common src/ directory for hostapd variants as well to fix compile errors when both variants are selected (#2722) 2007-11-17 14:14:16 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org