openwrtv3/target/linux
Hauke Mehrtens 5caee877dc brcm47xx: increase max image size
the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the
flash.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46872
2015-09-11 17:55:28 +00:00
..
adm5120 adm5120: disable the openwrt commandline hack 2015-08-30 12:17:54 +00:00
adm8668 build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
ar7 ar7: fix HIGHMEM_START (#20427) 2015-09-02 16:22:44 +00:00
ar71xx ar71xx: Restore buildability of the AP121 target 2015-09-11 16:34:08 +00:00
arm64 arm64: use common image prefix 2015-05-27 14:57:38 +00:00
at91 at91: fix usb rate backport patch tab mangle 2015-08-17 16:10:49 +00:00
ath25 ath25: disable the openwrt commandline hack 2015-08-30 12:17:56 +00:00
au1000 image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
bcm53xx bcm53xx: support sysupgrade with Netgear R7000 original firmware 2015-08-26 15:21:14 +00:00
brcm47xx brcm47xx: increase max image size 2015-09-11 17:55:28 +00:00
brcm63xx kernel: update 3.18 to 3.18.21 2015-09-02 10:18:15 +00:00
brcm2708 brcm2708: remove linux 3.18 support 2015-09-11 17:17:30 +00:00
cns3xxx kernel: update 3.18 to 3.18.21 2015-09-02 10:18:15 +00:00
gemini kernel: refresh patches for 4.1 2015-07-22 12:51:11 +00:00
generic mvsw61xx: match swconfig function names 2015-09-11 16:34:49 +00:00
imx6 kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
ipq806x ipq806x: fix uninitialized variable usage in cpufreq-krait 2015-09-10 10:09:42 +00:00
ixp4xx kernel: update 4.1 to 4.1.5 2015-08-14 13:06:33 +00:00
kirkwood kirkwood: add wpad-mini to router profiles 2015-08-05 13:56:02 +00:00
lantiq lantiq: Use the BAR0 base address in the ath PCI fixup code 2015-09-11 16:35:46 +00:00
malta malta: disable the openwrt commandline hack 2015-08-30 12:18:05 +00:00
mcs814x mcs814x: use firmware partition splitter on dLAN USB Extender 2015-08-17 06:16:19 +00:00
mpc85xx mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1 2015-07-09 06:56:45 +00:00
mvebu This had been set in r44508 as a workaround for switch problems. 2015-08-21 08:10:48 +00:00
mxs kernel: update 4.1 to 4.1.4 2015-08-05 13:55:14 +00:00
netlogic netlogic: copy initramfs image to $(BIN_DIR) 2015-04-23 22:31:36 +00:00
octeon octeon: fix imagebuilder 2015-05-29 11:28:20 +00:00
omap kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4 2015-09-08 12:31:04 +00:00
omap24xx omap24xx: Add basic config for linux-4.0 2015-03-19 18:45:32 +00:00
orion kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4 2015-09-08 12:31:04 +00:00
oxnas kernel: update 4.1 to 4.1.6 2015-08-23 18:06:11 +00:00
ppc40x ppc40x: upgrade to 3.18 2015-04-12 20:48:13 +00:00
ppc44x image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
pxa kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED 2015-03-06 07:56:34 +00:00
ramips ramips: Enable RTC support for PBR-M1 2015-09-11 16:32:58 +00:00
rb532 kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
realview realview: use common image prefix 2015-05-27 15:34:38 +00:00
sunxi kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4 2015-09-08 12:31:04 +00:00
uml uml: remove linux 3.14 support 2015-03-28 13:20:52 +00:00
x86 kernel: remove kmod-crypto-aes, AES crypto support is always built into the kernel 2015-07-24 15:36:08 +00:00
xburst image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
Makefile Add kernel_nconfig make target 2010-08-06 21:36:35 +00:00