openwrtv3/target/linux
Tino Reichardt 712ebe95f8 lantiq: add Allnet ALL0333CJ support
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ.

Specifications:
- SoC: Amazon-SE
- RAM: 16MB
- Storage: 4MB NOR FLash
- LEDs: Power, Ethernet, DSL (Sync)
- Buttons: 1x Reset Button (not currently supported, will be done)
- 1x Ethernet-Port: 1x RJ45 10/100BaseTX
- 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+)

Installation:
- can be done via telnet+tftp or serial console
- default passwords:
  - via telnet (root:admin)
  - via webinterface http://172.16.1.254:8235/ (admin:coolwhite)

Installation via telnet / tftp:
host: # your own host must have an tftpd daemon, then do this:
host: ifconfig eth0:172 172.16.1.1 up
host: # telnet to allnet modem, root:admin
host: telnet 172.16.1.254
modem: # kill this daemon, it spams your console
modem: killall dsl_cpe_control
modem: # change to some place in ram:
modem: cd /ramdisk/tftp_upload
modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage
modem: tftp -g -r uImage 172.16.1.1
modem: # load these extra tools from your tftpd via:
modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz
modem: tftp -g -r flashwrite 172.16.1.1
modem: tftp -g -r fw_setenv 172.16.1.1
modem: tftp -g -r fw.conf 172.16.1.1
modem: ln -s fw_setenv fw_printenv
modem: chmod +x *
modem: ./fw_setenv disable_recovery y
modem: ./fw_setenv kernel_addr 0xb0010000
modem: ./flashwrite /dev/mtd/1 uImage 0

Installation via serial line at uboot:
uboot: # erase everything exept bootloader
uboot: protect on b0000000 +10000; protect on b03f0000 +10000
uboot: erase all
uboot: # get new firmware via tftp:
uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000
uboot: # copy to flash:
uboot: cp.b 0x80100000 $(kernel_addr) $(filesize)
uboot: # disable proprietary image checking:
uboot: setenv disable_recovery=y; saveenv
uboot: # reboot with LEDE ;)
uboot: reset

Ethernet works as expected, DSL syncronization does not work properly
currently, I am working on this issue.

Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
2017-06-03 21:14:07 +02:00
..
adm5120 adm5120: mark the rb1xx subtarget as broken 2017-01-16 20:40:12 +01:00
adm8668 build: fix subtarget descriptions 2016-09-04 13:35:11 +02:00
apm821xx kernel: update kernel 4.9 to 4.9.30 2017-05-27 00:48:37 +02:00
ar7 ar7: diag.sh: use common status_led_* functions 2017-03-15 23:14:54 +01:00
ar71xx ar71xx: Fix UBIFS work on Mikrotik RB95x devices 2017-05-31 11:36:21 +02:00
arc770 kernel: update kernel 4.9 to 4.9.29 2017-05-21 21:51:22 +02:00
archs38 kernel: update kernel 4.9 to 4.9.29 2017-05-21 21:51:22 +02:00
armvirt armvirt: 64: enable usb support 2017-05-03 23:20:12 +08:00
at91 kernel: remove ubifs xz decompression support 2017-01-09 14:07:06 +01:00
ath25 kernel: backport MIPS changes introducing a separate IRQ stack 2017-01-15 18:25:54 +01:00
au1000 kernel: update kernel 3.18 to version 3.18.43 2016-10-24 20:25:14 +03:00
bcm53xx kernel: update kernel 4.9 to 4.9.29 2017-05-21 21:51:22 +02:00
brcm47xx brcm47xx: remove target specific network preinit config 2017-05-27 12:17:40 +02:00
brcm63xx brcm63xx: fix invalid Asmax AR 1004g DTS reference 2017-05-05 19:58:49 +02:00
brcm2708 kernel: update kernel 4.9 to 4.9.30 2017-05-27 00:48:37 +02:00
cns3xxx cns3xxx: enable mpcore watchdog 2017-04-12 12:13:16 +02:00
gemini gemini: rename config-default to config-4.4 2016-08-24 01:44:05 +03:00
generic kernel: add missing config options 2017-05-27 11:30:38 +02:00
imx6 imx6: disable UART dma 2017-05-31 08:45:26 +02:00
ipq806x ipq806x: add qpic nand and bam dma node's in ipq4019 dts tree 2017-05-29 07:26:03 +02:00
ixp4xx kernel: update kernel 4.4 to 4.4.53 2017-03-12 15:46:02 +01:00
kirkwood kirkwood: set sata/usb led trigger for NSA3xx 2017-05-14 21:45:50 +02:00
lantiq lantiq: add Allnet ALL0333CJ support 2017-06-03 21:14:07 +02:00
layerscape kernel: update kernel 4.4 to 4.4.52 2017-03-03 18:17:47 +01:00
malta malta: restore "be" subtarget from being source-only 2017-03-05 16:34:17 +01:00
mcs814x kernel: remove kmod packages for bridge, stp, llc and 8021q 2017-02-09 14:49:34 +01:00
mediatek kernel: update kernel 4.9 to 4.9.29 2017-05-21 21:51:22 +02:00
mpc85xx kernel: update kernel 4.9 to 4.9.29 2017-05-21 21:51:22 +02:00
mvebu mvebu: Add block device sd to default kernel config 2017-06-02 12:02:21 +02:00
mxs mxs: enable nvmem support 2017-02-10 11:05:57 +01:00
octeon octeon: remove linux 4.4 support 2017-05-25 19:01:07 +02:00
omap omap: rework image generation and profiles 2017-04-24 18:03:31 +02:00
omap24xx kernel: clean up usb gadget support 2016-09-15 13:11:21 +02:00
orion kernel: split up 980-arm_openwrt_machtypes.patch and move to target folders 2017-01-27 11:18:27 +01:00
oxnas kernel: update kernel 4.4 to version 4.4.69 2017-05-21 21:48:16 +02:00
pistachio kernel: update kernel 4.9 to 4.9.30 2017-05-27 00:48:37 +02:00
ppc40x build: fix subtarget descriptions 2016-09-04 13:35:11 +02:00
ppc44x ppc44x: mark as broken 2017-01-10 12:49:34 +01:00
ramips ramips: enable PCIe on MT7688 2017-06-03 20:45:38 +02:00
rb532 kernel: remove ubifs xz decompression support 2017-01-09 14:07:06 +01:00
sunxi sunxi: sysupgrade: sync with x86 2017-05-29 23:50:35 +02:00
uml uml: Fix sample command line 2017-05-26 15:43:26 -07:00
x86 x86: disable X2APIC support for legacy subtargets 2017-06-02 01:51:03 +02:00
xburst kernel: remove kmod packages for bridge, stp, llc and 8021q 2017-02-09 14:49:34 +01:00
zynq kernel: remove out of tree direct-io disable hack 2017-04-26 10:27:45 +02:00
Makefile