KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ar71xx/files/arch/mips/ath79
History
Adrian Schmutzler 5c5bf8b865
ar71xx: Add support for TP-Link CPE210 v2 
This PR adds support for a popular low-cost 2.4GHz N based AP

Specifications:
 - SoC: Qualcomm Atheros QCA9533 (650MHz)
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 2.4GHz N based built into SoC 2x2
 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Notes:
TP-Link does not use bootstrap registers so without this patch reference
clock detects as 40MHz while it is actually 25MHz.
This is due to messed up bootstrap resistor configuration on the PCB.
Provided GPL code just forces 25MHz reference clock.
That causes booting with completely wrong clocks, for example, CPU tries
to boot at 1040MHz while the stock is 650MHz.
So this PR depends on PR #672 to remove 40MHz reference clock.
Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2018-06-23 16:06:31 +02:00
..
dev-ap9x-pci.c ar71xx: add correct named default wireless led by using platform leds 2017-04-08 14:30:00 +02:00
dev-ap9x-pci.h ar71xx: add correct named default wireless led by using platform leds 2017-04-08 14:30:00 +02:00
dev-dsa.c ar71xx: remove obsolete '< KERNEL_VERSION(3, 15, 0)' checks 2018-01-09 21:33:18 +01:00
dev-dsa.h
dev-eth.c ar71xx: fix incorrect speed setting on QCA9556 2018-06-18 23:23:30 +02:00
dev-eth.h ar71xx: add support for Fritz!Box 4020 2018-05-07 10:42:26 +02:00
dev-m25p80.c ar71xx: clean up spi controller related patches 2016-12-12 10:22:17 +01:00
dev-m25p80.h ar71xx: clean up spi controller related patches 2016-12-12 10:22:17 +01:00
dev-nfc.c ar71xx: ar934x_nfc: fix memory initialization bug 2014-03-12 12:52:36 +00:00
dev-nfc.h
Kconfig.openwrt ar71xx: Add support for TP-Link CPE210 v2 2018-06-23 16:06:31 +02:00
mach-a60.c ar71xx: add kernel support for the OpenMesh A40 board 2017-02-14 12:18:05 +01:00
mach-alfa-ap96.c ar71xx: clean up spi controller related patches 2016-12-12 10:22:17 +01:00
mach-alfa-ap120c.c ar71xx: cosmetic fix of alfa ap120c/ap96 ordering 2016-03-24 21:09:34 +00:00
mach-alfa-nx.c
mach-all0258n.c
mach-all0315n.c
mach-antminer-s1.c ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power 2015-10-26 09:01:28 +00:00
mach-antminer-s3.c ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power 2015-10-26 09:01:28 +00:00
mach-antrouter-r1.c V2 ar71xx : Add Support for the Bitmain Antrouter R1 2016-01-01 21:21:13 +00:00
mach-ap90q.c ar71xx: YunCore AP90Q image supports also AP80Q 2018-02-22 18:53:22 +01:00
mach-ap91-5g.c ar71xx: add support for ALFA Network AP91-5G 2018-01-14 20:33:18 +01:00
mach-ap96.c
mach-ap121f.c ar71xx: add support for ALFA Network AP121F 2017-07-22 23:13:55 +02:00
mach-ap132.c
mach-ap143.c ar71xx: add support for ap143 2015-07-07 08:06:05 +00:00
mach-ap147.c ar71xx: Add support for AP147-010 reference board 2015-07-24 09:09:42 +00:00
mach-ap152.c ar71xx: fix ap152 support 2016-01-10 17:19:34 +00:00
mach-ap531b0.c ar71xx: add support for Rockeetech AP531B0 2017-03-12 17:38:31 +01:00
mach-archer-c7-v4.c ar71xx: fix section mismatch in TP-Link Archer C7 v4 support 2017-11-05 18:52:14 +01:00
mach-archer-c7-v5.c ar71xx: add support for TP-LINK Archer C7 v5 2018-06-20 15:36:19 +02:00
mach-archer-c7.c ar71xx: fix section mismatches 2017-10-11 22:36:04 +02:00
mach-archer-c25-v1.c ar71xx: fix secondary gpio controller base values 2017-10-24 13:24:04 +02:00
mach-archer-c59-v1.c ar71xx: C58/C59 fix LAN1 working incorrectly 2017-12-08 13:53:03 +01:00
mach-archer-c60-v1.c ar71xx: add support for TP-Link Archer C60 v2 2018-04-07 00:09:05 +02:00
mach-arduino-yun.c ar71xx: Arduino Yun board 'WLAN RST' button support 2016-03-10 19:11:13 +00:00
mach-aw-nr580.c
mach-bhr-4grv2.c ar71xx: add support for Buffalo BHR-4GRV2 2016-11-16 10:54:33 +01:00
mach-bhu-bxu2000n2-a.c
mach-bsb.c ar71xx: Add support for Black Swift 2015-08-17 06:16:54 +00:00
mach-c55.c ar71xx: clean up spi controller related patches 2016-12-12 10:22:17 +01:00
mach-c60.c ar71xx: fix invalid pointer dereference in c60_nand_scan_fixup() 2017-12-15 23:57:41 +01:00
mach-cap324.c ar71xx: Kernel board definition for PowerCloud CAP324 2015-12-19 11:27:19 +00:00
mach-cap4200ag.c
mach-carambola2.c ar71xx: update Carambola2 platform data 2014-08-04 14:46:52 +00:00
mach-cf-e316n-v2.c ar71xx: fix COMFAST CF-E375AC support 2018-02-22 18:53:22 +01:00
mach-cpe510.c ar71xx: Add support for TP-Link CPE210 v2 2018-06-23 16:06:31 +02:00
mach-cpe870.c ar71xx: add support for YunCore CPE870 2016-11-21 10:05:40 +01:00
mach-cr3000.c ar71xx: Kernel board definition for PowerCloud CR3000 2015-12-19 11:27:25 +00:00
mach-cr5000.c ar71xx: Kernel board definition for PowerCloud CR5000 2015-12-19 11:27:32 +00:00
mach-dap-1330-a1.c ar71xx: Add support for D-Link DAP-1330 a1 2018-04-05 15:28:56 +02:00
mach-dap-2695-a1.c ar71xx: add support for D-Link DAP-2695 rev. A1 2016-10-27 01:50:42 +03:00
mach-dgl-5500-a1.c add D-link DGL-5500 A1 support 2014-11-27 14:27:34 +00:00
mach-dhp-1565-a1.c ar71xx: Added support for D-link DHP-1565 rev. A1 2014-11-19 09:20:47 +00:00
mach-dir-505-a1.c ar71xx: dir-505: fix reset button gpio active_low value 2015-02-09 12:17:00 +00:00
mach-dir-600-a1.c ar71xx: Add support for D-Link EBR-2310 Rev. C 2017-02-14 12:27:14 +01:00
mach-dir-615-c1.c ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address 2015-01-28 19:19:47 +00:00
mach-dir-615-i1.c ar71xx: add support for D-Link DIR-615 rev. Ix board 2015-07-07 13:48:39 +00:00
mach-dir-825-b1.c
mach-dir-825-c1.c
mach-dir-869-a1.c ar71xx: fix LED config for DIR-869 A1 2017-11-03 20:04:52 +01:00
mach-dlan-hotspot.c ar71xx: add support for the devolo dLAN Hotspot 2015-11-21 21:24:18 +00:00
mach-dlan-pro-500-wp.c ar71xx: add support for the devolo dLAN pro 500 Wireless+ 2015-07-14 07:32:33 +00:00
mach-dlan-pro-1200-ac.c ar71xx: fix AR8337 switch initialization on dLAN pro 1200+ WiFi ac 2016-01-19 10:16:11 +00:00
mach-domywifi-dw33d.c ar71xx: Add support to DomyWifi DW33D 2016-10-25 17:51:08 +02:00
mach-dr344.c ar71xx: add support for Wallys DR342 2017-11-14 22:36:46 +01:00
mach-dr531.c ar71xx: add support for Wallys DR531 2016-07-13 20:03:10 +02:00
mach-dragino2.c ar71xx: Fix LED definitions for the DRAGINO2 board 2014-10-14 10:33:07 +00:00
mach-e600g-v2.c ar71xx: change brand name WHQX to Qxwlan 2018-04-06 23:11:00 +02:00
mach-e1700ac-v2.c ar71xx: change brand name WHQX to Qxwlan 2018-04-06 23:11:00 +02:00
mach-e2100l.c ar71xx: Added missing support for Linksys E2100L 2016-12-14 18:42:48 +01:00
mach-eap120.c ar71xx: Add support to TP-Link EAP120 2016-10-18 09:18:55 +02:00
mach-eap300v2.c ar71xx: add kernel support for the EnGenius EAP300 v2 board 2014-07-14 21:30:26 +00:00
mach-eap7660d.c
mach-el-m150.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-el-mini.c ar71xx: Fix the sys LEDs on the EasyLink M150 and mini 2014-11-14 16:58:29 +00:00
mach-ens202ext.c ar71xx: add support for EnGenius ENS202EXT 2017-05-30 14:15:25 +02:00
mach-epg5000.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-esr900.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-esr1750.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-ew-balin.c ar71xx: add ew-balin platform from Embedded Wireless 2018-01-25 16:50:08 +01:00
mach-ew-dorin.c ar71xx: update LED definitions for embedded wireless dorin 2017-10-07 09:20:41 +02:00
mach-f9k1115v2.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-fritz300e.c ar71xx: add AVM FRITZ!WLAN Repeater 300E support 2017-06-24 22:36:38 +02:00
mach-fritz450e.c ar71xx: add support for Fritz!WLAN Repeater 450E 2018-06-18 23:23:30 +02:00
mach-fritz4020.c ar71xx: add support for Fritz!Box 4020 2018-05-07 10:42:26 +02:00
mach-gl-ar150.c ar71xx: include vendor name for GL iNet products 2018-02-22 18:53:22 +01:00
mach-gl-ar300.c ar71xx: include vendor name for GL iNet products 2018-02-22 18:53:22 +01:00
mach-gl-ar300m.c ar71xx: include vendor name for GL iNet products 2018-02-22 18:53:22 +01:00
mach-gl-ar750.c ar71xx: add support for GL.iNet GL-AR750 2018-01-15 00:12:13 +01:00
mach-gl-ar750s.c ar71xx: add support for GL.iNet GL-AR750S 2018-05-27 09:26:09 +02:00
mach-gl-domino.c ar71xx: fix LED names for GL Innovations boards 2016-10-04 11:50:50 +02:00
mach-gl-inet.c ar71xx: fix LED names for GL Innovations boards 2016-10-04 11:50:50 +02:00
mach-gl-mifi.c ar71xx: Fix typo in wan LED color of gl-mifi 2018-04-04 09:27:18 +02:00
mach-gl-usb150.c ar71xx: add support for GL.iNet GL-USB150 2017-09-10 22:14:43 +02:00
mach-gs-oolite-v1.c ar71xx: rework GainStrong devices support 2018-02-22 18:53:22 +01:00
mach-gs-oolite-v5-2.c ar71xx: add support for GainStrong Oolite V5.2 2018-02-22 18:53:22 +01:00
mach-hiveap-121.c ar71xx: add support for Aerohive AP-121 2017-05-15 22:58:59 +02:00
mach-hiwifi-hc6361.c ar71xx: add kernel support for HiWiFi HC6361. 2014-06-02 14:56:24 +00:00
mach-hornet-ub.c Fix (invert/revert) Hornet-UB WPS LED state 2015-03-15 19:25:48 +00:00
mach-ja76pf.c
mach-jwap003.c
mach-jwap230.c ar71xx: add support for jjPlus JWAP230 2016-07-13 20:03:10 +02:00
mach-koala.c ar71xx: add support for OCEDO Koala 2018-06-07 09:31:58 +02:00
mach-lan-turtle.c ar71xx: add support for AR9331 based Hak5 devices 2018-02-22 18:53:22 +01:00
mach-lima.c ar71xx: Fix offset to WMAC address for 8devices Lima 2018-06-08 09:39:14 +02:00
mach-mc-mac1200r.c ar71xx: Add support for MERCURY MAC1200R 2015-02-09 12:16:51 +00:00
mach-mr12.c ar71xx: add mac partition to the MR12/MR16 2016-10-26 12:37:45 +02:00
mach-mr16.c ar71xx: add mac partition to the MR12/MR16 2016-10-26 12:37:45 +02:00
mach-mr18.c ar71xx: add more registers to ar71x_regs.h 2018-02-13 11:20:58 +01:00
mach-mr600.c ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board 2014-08-18 13:09:14 +00:00
mach-mr900.c ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR900 2016-03-23 12:52:09 +00:00
mach-mr1750.c ar71xx: add kernel support for the OpenMesh MR1750v2 2016-05-23 12:19:25 +02:00
mach-mynet-n600.c ar71xx: my net n600: simplify LNA GPIO setup 2014-01-10 09:37:58 +00:00
mach-mynet-n750.c ar71xx: fix section mismatches 2017-10-11 22:36:04 +02:00
mach-mynet-rext.c ar71xx: fix 100/10mbps ethernet link issues on mynet range extender 2015-06-14 17:41:01 +00:00
mach-mzk-w04nu.c
mach-mzk-w300nh.c
mach-n5q.c ar71xx: add support for ALFA Network N5Q 2018-01-14 21:30:16 +01:00
mach-nbg460n.c
mach-nbg6716.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-om2p.c ar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4 2017-02-14 12:18:04 +01:00
mach-om5p.c ar71xx: Increase RXD/RDV to 2 on OM5P-AN 2015-04-20 15:01:00 +00:00
mach-om5pac.c ar71xx: add kernel support for the OpenMesh OM5P-AC board 2016-04-09 10:25:47 +00:00
mach-om5pacv2.c ar71xx: drop mdio-gpio.h include from mach-om5pacv2.c 2018-01-17 11:07:17 +01:00
mach-omy-g1.c ar71xx: Add support for the OMYlink OMY-G1 2016-04-26 11:44:36 +00:00
mach-omy-x1.c ar71xx: Add support for the OMYlink OMY-X1 2016-03-16 09:26:58 +00:00
mach-onion-omega.c ar71xx: add support for Onion Omega 2015-07-24 09:09:49 +00:00
mach-pb42.c
mach-pqi-air-pen.c ar71xx: add support for PQI Air Pen 2017-01-20 00:52:48 +01:00
mach-qihoo-c301.c ar71xx: qihoo: define flash variable as static 2015-02-07 19:59:02 +00:00
mach-r36a.c ar71xx: add support for ALFA Network R36A 2018-01-15 00:12:13 +01:00
mach-r602n.c ar71xx: add support for P&W R602N and CPE505N 2017-03-23 17:59:47 +01:00
mach-r6100.c Netgear R6100 support 2014-11-26 08:28:22 +00:00
mach-rambutan.c ar71xx: add support for 8devices Rambutan development board 2017-05-15 22:43:33 +02:00
mach-rb4xx.c ar71xx: remove obsolete '< KERNEL_VERSION(4, 4, 0)' check 2018-01-09 21:33:19 +01:00
mach-rb91x.c ar71xx: fix secondary gpio controller base values 2017-10-24 13:24:04 +02:00
mach-rb95x.c ar71xx: fix invalid pointer dereference in rb95x_nand_scan_fixup() 2017-12-16 00:00:25 +01:00
mach-rb750.c ar71xx: Detect USB port on Mikrotik RB750UP 2017-01-15 17:43:14 +01:00
mach-rb922.c ar71xx: add support for MikroTik RouterBOARD 921GS-5HPacD r2 (mANTBox 15s) 2017-12-21 17:06:54 +01:00
mach-rb2011.c ar71xx: fix section mismatches 2017-10-11 22:36:04 +02:00
mach-rbspi.c ar71x: add support for Mikrotik Routerboard wAP R 2018-06-19 14:32:47 +02:00
mach-rbsxtlite.c ar71xx: Add kernel 4.9 support 2017-10-11 22:32:39 +02:00
mach-re450.c ar71xx: add support for TP-Link RE355 2018-02-13 09:21:20 +01:00
mach-rme-eg200.c ar71xx: Add eTactica EG-200 support 2018-02-13 10:01:53 +01:00
mach-rut9xx.c ar71xx: add support for Teltonika RUT900 2018-01-15 00:09:43 +01:00
mach-rw2458n.c
mach-sc300m.c ar71xx: add Abicom SC300M support 2017-01-20 00:40:27 +01:00
mach-sc450.c ar71xx: add Abicom SC450 support 2017-01-20 00:40:33 +01:00
mach-sc1750.c ar71xx: add Abicom SC1750 support 2017-01-20 00:40:40 +01:00
mach-smart-300.c add support for the NC-LINK SMART-300 2014-08-11 11:44:51 +00:00
mach-som9331.c ar71xx: add support for OpenEmbed SOM9331 2016-06-07 11:21:55 +02:00
mach-sr3200.c ar71xx: add support for YunCore SR3200 and XD3200 2016-12-12 09:57:40 +01:00
mach-t830.c ar71xx: add support for YunCore T830 2018-02-22 18:53:22 +01:00
mach-tellstick-znet-lite.c ar71xx: add support for the Telldus TellStick ZNet Lite 2016-03-10 19:07:26 +00:00
mach-tew-632brp.c
mach-tew-673gru.c
mach-tew-712br.c
mach-tew-732br.c
mach-tew-823dru.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-tl-mr3x20.c
mach-tl-mr11u.c
mach-tl-mr13u.c ar71xx: Fix LED polarity for the TP-LINK TL-MR13U. 2015-03-10 13:26:50 +00:00
mach-tl-mr3020.c
mach-tl-mr6400.c ar71xx: Add support for TP-Link MR6400 2017-05-27 07:54:21 +02:00
mach-tl-wa701nd-v2.c ar71xx: add support for TL-WA701ND v2 2015-01-20 15:48:07 +00:00
mach-tl-wa801nd-v3.c ar71xx: fix LEDs and sysupgrade support for TL-WA801ND v3 2016-12-06 19:08:35 +01:00
mach-tl-wa830re-v2.c ar71xx: added support for TL-WA830RE V2 2014-07-13 07:12:22 +00:00
mach-tl-wa901nd-v2.c
mach-tl-wa901nd-v4.c ar71xx: add support for TP-Link TL-WA901ND v5 2017-11-14 22:36:46 +01:00
mach-tl-wa901nd.c
mach-tl-wa7210n-v2.c ar71xx: TL-WA7210n v2 support 2015-02-24 12:00:50 +00:00
mach-tl-wax50re.c ar71xx: add support for TP-Link TL-WA855RE v1 2017-06-29 10:37:36 +02:00
mach-tl-wdr3320-v2.c ar71xx: add TP-LINK TL-WDR3320 v2 support 2015-09-14 20:12:16 +00:00
mach-tl-wdr3500.c
mach-tl-wdr4300.c ar71xx: fix section mismatches 2017-10-11 22:36:04 +02:00
mach-tl-wdr6500-v2.c ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, should hopefully fix regression reported in #21520 2016-02-07 21:00:11 +00:00
mach-tl-wpa8630.c ar71xx: fix machine name for several devices 2017-03-12 17:39:12 +01:00
mach-tl-wr703n.c ar71xx: fix typo in tl-wr710n mac setup (fixes #16469) 2014-05-24 08:01:33 +00:00
mach-tl-wr720n-v3.c ar71xx: add support for TL-WR720N-v4. 2015-06-18 18:21:23 +00:00
mach-tl-wr741nd-v4.c
mach-tl-wr741nd.c
mach-tl-wr802n.c ar71xx: merge mach-files for TP-Link TL-WR802N v1 and v2 2017-11-14 22:36:46 +01:00
mach-tl-wr810n.c ar71xx: add support for TP-Link TL-WR810N v2 2017-11-14 22:36:46 +01:00
mach-tl-wr841n-v8.c ar71xx: add support for the TP-LINK TL-WR941ND v5 2015-02-04 06:10:20 +00:00
mach-tl-wr841n-v9.c ar71xx: fix LED defines for TP-Link TL-WR740N v6 2017-05-30 14:15:25 +02:00
mach-tl-wr841n.c
mach-tl-wr902ac-v1.c ar71xx: support LED in TP-Link TL-WR902AC RJ45 socket 2017-07-09 23:44:20 +02:00
mach-tl-wr940n-v4.c ar71xx: add support for TP-Link TL-WR940N v6 2018-04-06 23:11:00 +02:00
mach-tl-wr941nd-v6.c ar71xx: add support for TP-LINK TL-WR941ND v6 (international version) 2015-11-08 20:39:18 +00:00
mach-tl-wr941nd.c
mach-tl-wr942n-v1.c ar71xx: fix secondary gpio controller base values 2017-10-24 13:24:04 +02:00
mach-tl-wr1041n-v2.c ar71xx: add support for TL-WR1041N(v2) LAN/WAN LEDs. 2017-09-04 12:48:23 +02:00
mach-tl-wr1043nd-v2.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-tl-wr1043nd-v4.c Revert "ar71xx: TL-WR1043N v4/v5: add orange WAN LED support" 2017-12-14 11:00:11 +01:00
mach-tl-wr1043nd.c kernel: add reset control support to rtl8366 driver 2018-05-24 15:43:39 +02:00
mach-tl-wr2543n.c ar71xx: fix ath9k default LED changes fallout 2017-04-13 08:18:57 +02:00
mach-ts-d084.c ar71xx: Add support for PISEN TS-D084 2018-05-22 07:58:16 +02:00
mach-tube2h.c ar71xx: fix and improve ALFA Network Tube2H support 2018-05-09 20:32:47 +02:00
mach-ubnt-unifiac.c ar71xx: add support for UniFi-AC-Mesh 2017-05-15 22:43:33 +02:00
mach-ubnt-xm.c ar71xx: limit Ethernet speed of UBNT Airmax M (XM) devices to 100Mbit/s 2018-04-10 15:27:39 +02:00
mach-ubnt.c
mach-wam250.c ar71xx: add support for Samsung WAM250 2018-02-22 18:53:22 +01:00
mach-weio.c ar71xx: Add WeIO Board Support 2015-09-24 09:08:47 +00:00
mach-whr-hp-g300n.c
mach-wi2a-ac200i.c ar71xx: add support for Nokia WI2A-AC200i 2017-10-19 12:27:42 +02:00
mach-wifi-pineapple-nano.c ar71xx: add support for AR9331 based Hak5 devices 2018-02-22 18:53:22 +01:00
mach-wlae-ag300n.c
mach-wlr8100.c ar71xx: fix Sitecom WLR-8100 support 2018-01-15 00:12:13 +01:00
mach-wndap360.c ar71xx: fix machine name for several devices 2017-03-12 17:39:12 +01:00
mach-wndr3700.c ar71xx: WNDR3700: enable RFKILL function for Wifi button 2018-05-18 11:18:53 +02:00
mach-wndr4300.c ar71xx: WNDR4300: Fix switch HW controlled LEDs 2017-03-13 00:12:07 +01:00
mach-wnr2000-v3.c ar71xx: add correct named default wireless led by using platform leds 2017-04-08 14:30:00 +02:00
mach-wnr2000-v4.c ar71xx: do general formatting on wnr2000-v4 2015-05-08 12:24:30 +00:00
mach-wnr2000.c ar71xx: Add support for Netgear WNR2000v1 2016-12-14 10:37:01 +01:00
mach-wnr2200.c ar71xx: add correct named default wireless led by using platform leds 2017-04-08 14:30:00 +02:00
mach-wp543.c ar71xx: wp543: set active_low flag for the buttons 2014-01-26 14:55:32 +00:00
mach-wpe72.c ar71xx: compex wpe72 add space to include statement 2015-07-09 07:04:14 +00:00
mach-wpj342.c ar71xx: add support for Compex WPJ342 2016-04-09 10:26:41 +00:00
mach-wpj344.c ar71xx: wpj344: remove unused eth1 device 2017-06-29 10:37:36 +02:00
mach-wpj531.c ar71xx: wpj531: fix GPIOs for LED 2017-03-27 08:36:32 +02:00
mach-wpj558.c ar71xx: wpj558: remove unused eth1 device and fix MAC address 2017-09-10 22:15:04 +02:00
mach-wpj563.c ar71xx: Compex WPJ563 support 2017-03-30 09:57:22 +02:00
mach-wrt160nl.c ar71xx: rename wrt160nl's trx partition parser 2015-03-11 15:56:15 +00:00
mach-wrt400n.c Revert "ar71xx: wrt400n: lift size limit on kernel and rootfs part" 2017-01-20 06:43:13 +01:00
mach-wrtnode2q.c ar71xx: add WRTnode2Q support 2016-06-06 14:58:11 +02:00
mach-wzr-450hp2.c Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x" 2016-03-23 12:52:17 +00:00
mach-wzr-hp-ag300h.c ar71xx: wzr-hp-ag300h: drop unused wmac led_pin settings 2017-11-03 20:04:52 +01:00
mach-wzr-hp-g300nh.c
mach-wzr-hp-g300nh2.c ar71xx: fix ath9k default LED changes fallout 2017-04-13 08:18:57 +02:00
mach-wzr-hp-g450h.c ar71xx: fix ath9k default LED changes fallout 2017-04-13 08:18:57 +02:00
mach-z1.c ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway 2016-09-27 17:50:22 +02:00
mach-zbt-we1526.c ar71xx: add support for Zbtlink ZBT-WE1526 2016-08-18 09:49:18 +02:00
mach-zcn-1523h.c
machtypes.h ar71xx: Add support for TP-Link CPE210 v2 2018-06-23 16:06:31 +02:00
Makefile ar71xx: add support for TP-LINK Archer C7 v5 2018-06-20 15:36:19 +02:00
nvram.c ar71xx: add support for TP-Link TL-WR942N v1 2017-06-11 21:32:17 +02:00
nvram.h
pci-ath9k-fixup.c ar71xx: allow pci calibration fixup to work with ar9344 2015-07-07 13:46:44 +00:00
pci-ath9k-fixup.h
routerboot.c ar71xx: routerboot: export extended wlan data via sysfs 2015-04-07 20:03:43 +00:00
routerboot.h ar71xx: add definitions for RouterBOARD hardware option bits 2018-01-22 10:53:00 +01:00