openwrtv3/target/linux/ath25/patches-4.4/220-enet_micrel_workaround.patch
Russell Senior f89a20a89a ath25: update kernel from 3.18 to 4.4
Summary of changes:
	* moved config-3.18 to config-4.4 and patches-3.18 to patches-4.4
	* removed most of the first two patches, that seem to be upstream already
	* changed deprecated/removed IRQF_DISABLED to zero following examples in upstream kernel patches
	* added config line to disable device-tree to satisfy kernel configuration
	* add new image generation code

Build tested and run tested on an Accton MR3201A.

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:56:38 +02:00

91 lines
2.2 KiB
Diff

--- a/drivers/net/ethernet/atheros/ar231x/ar231x.c
+++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c
@@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m
static int ar231x_mdiobus_reset(struct mii_bus *bus);
static int ar231x_mdiobus_probe(struct net_device *dev);
static void ar231x_adjust_link(struct net_device *dev);
+static bool no_phy;
#ifndef ERR
#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
@@ -167,6 +168,32 @@ static const struct net_device_ops ar231
#endif
};
+static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
+{
+ int phy_reg;
+
+ /**
+ * Grab the bits from PHYIR1, and put them
+ * in the upper half.
+ */
+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id |= (phy_reg & 0xffff);
+
+ return 0;
+}
+
static int ar231x_probe(struct platform_device *pdev)
{
struct net_device *dev;
@@ -273,6 +300,24 @@ static int ar231x_probe(struct platform_
mdiobus_register(sp->mii_bus);
+ /**
+ * Workaround for Micrel switch, which is only available on
+ * one PHY and cannot be configured through MDIO.
+ */
+ if (!no_phy) {
+ u32 phy_id = 0;
+
+ get_phy_id(sp->mii_bus, 1, &phy_id);
+ if (phy_id == 0x00221450)
+ no_phy = true;
+ }
+ if (no_phy) {
+ sp->link = 1;
+ netif_carrier_on(dev);
+ return 0;
+ }
+ no_phy = true;
+
if (ar231x_mdiobus_probe(dev) != 0) {
printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
rx_tasklet_cleanup(dev);
@@ -329,8 +374,10 @@ static int ar231x_remove(struct platform
rx_tasklet_cleanup(dev);
ar231x_init_cleanup(dev);
unregister_netdev(dev);
- mdiobus_unregister(sp->mii_bus);
- mdiobus_free(sp->mii_bus);
+ if (sp->mii_bus) {
+ mdiobus_unregister(sp->mii_bus);
+ mdiobus_free(sp->mii_bus);
+ }
kfree(dev);
return 0;
}
@@ -1079,6 +1126,9 @@ static int ar231x_ioctl(struct net_devic
{
struct ar231x_private *sp = netdev_priv(dev);
+ if (!sp->phy_dev)
+ return -ENODEV;
+
switch (cmd) {
case SIOCGMIIPHY:
case SIOCGMIIREG: