openwrtv3/target/linux/ipq806x/patches-4.9/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch
Hauke Mehrtens 4d649ba949 ipq806x: make patches apply again
Some part of this patch was added to the generic patches as it was
needed also for some other target. Do not add it here any more.

Fixes: 02050f7e7d ("kernel/4.{4, 9}: add manufacturer ID for Winbond NANDs")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-20 23:24:02 +01:00

38 lines
1.4 KiB
Diff

From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Mon, 14 Nov 2016 23:49:22 +0100
Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip
This patch adds the W25N01GV NAND to the table of
known devices. Without this patch the device gets detected:
nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
nand: Unknown NAND 256MiB 1,8V 8-bit
nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16
Whereas the u-boot identifies it as:
spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21
SF: Detected W25N01GV with page size 2 KiB, total 128 MiB
Due to the page size discrepancy, it's impossible to attach
ubi volumes on the device.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
drivers/mtd/nand/nand_ids.c | 4 ++++
include/linux/mtd/nand.h | 1 +
2 files changed, 5 insertions(+)
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -52,6 +52,10 @@ struct nand_flash_dev nand_flash_ids[] =
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
NAND_ECC_INFO(40, SZ_1K), 4 },
+ {"W25N01GV 1G 3.3V 8-bit",
+ { .id = {0xef, 0xaa} },
+ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE,
+ 2, 64, NAND_ECC_INFO(1, SZ_512) },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),