KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/bcm53xx/image/Makefile
Rafał Miłecki 55ff15cfd5 bcm53xx: disable building Linksys EA6300 V1 image 
This device has 2 TRX partitions (main one and failsafe one) and Linux
may not detect them properly failing to run userspace.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-25 10:50:27 +01:00

262 lines
6.6 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2013 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Image/Prepare
rm -f $(KDIR)/fs_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
# For UBI we want only one extra block
rm -f $(KDIR)/ubi_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
endef
define Build/lzma-d16
$(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new
mv $@.new $@
endef
# Similar to Build/tplink-safeloader but uses TRX instead of clean kernel
define Build/bcm53xx-tplink-safeloader
$(STAGING_DIR_HOST)/bin/trx \
-o $@.trx \
-m 33554432 \
-f $(IMAGE_KERNEL) -a 1024
$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(TPLINK_BOARD) \
-k $@.trx \
-r $@ \
-j \
-o $@.new
mv $@.new $@
rm $@.trx
endef
define Build/trx-serial
$(STAGING_DIR_HOST)/bin/trx \
-o $@.new \
-m 33554432 \
-f $(IMAGE_KERNEL) -a 1024 \
-f $@ -a 0x10000 -A $(KDIR)/fs_mark
mv $@.new $@
endef
define Build/trx-nand
# kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
# if it grows up between releases
# root: UBI with one extra block containing UBI mark to trigger erasing
# rest of partition
$(STAGING_DIR_HOST)/bin/trx \
-o $@.new \
-m 33554432 \
-f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
-f $@ \
-A $(KDIR)/ubi_mark -a 0x20000
mv $@.new $@
endef
define Build/asus-trx
$(STAGING_DIR_HOST)/bin/asustrx \
-p $(PRODUCTID) -i $@ -o $@.new
mv $@.new $@
endef
define Build/seama-nand
# Seama entity
$(STAGING_DIR_HOST)/bin/oseama \
entity $@.entity \
-m "dev=/dev/mtdblock/7" \
-m "type=firmware" \
-f $(IMAGE_KERNEL) \
-b 0x400000 \
-f $@ \
-f $(KDIR)/ubi_mark
# Seama container
$(STAGING_DIR_HOST)/bin/seama \
-s $@ \
-m "signature=$(SIGNATURE)" \
-i $@.entity
endef
DEVICE_VARS += PRODUCTID SIGNATURE NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD
BRCMFMAC_43602A1 := kmod-brcmfmac brcmfmac-firmware-43602a1-pcie
BRCMFMAC_4366B1 := kmod-brcmfmac brcmfmac-firmware-4366b1-pcie
USB2_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2
USB2_PACKAGES += kmod-usb-ledtrig-usbport
USB3_PACKAGES := $(USB2_PACKAGES) kmod-usb3 kmod-phy-bcm-ns-usb3
define Device/Default
# .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
# extract the full dtb name based on the device info
DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb)))
KERNEL := kernel-bin | append-dtb | lzma-d16
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
FILESYSTEMS := squashfs
KERNEL_NAME := zImage
IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
IMAGES := trx
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE/trx := append-ubi | trx-nand
endef
define Device/asus
IMAGES := trx
IMAGE/trx := append-ubi | trx-nand | asus-trx
endef
define Device/asus-rt-ac56u
DEVICE_TITLE := Asus RT-AC56U
DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-ac56u
define Device/asus-rt-ac68u
DEVICE_TITLE := Asus RT-AC68U
DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-ac68u
define Device/asus-rt-ac87u
DEVICE_TITLE := Asus RT-AC87U
DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-ac87u
define Device/asus-rt-n18u
DEVICE_TITLE := Asus RT-N18U
DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
TARGET_DEVICES += asus-rt-n18u
define Device/buffalo-wxr-1900dhp
DEVICE_TITLE := Buffalo WXR-1900DHP
DEVICE_PACKAGES := $(USB3_PACKAGES)
endef
TARGET_DEVICES += buffalo-wxr-1900dhp
define Device/buffalo-wzr-600dhp2
DEVICE_TITLE := Buffalo WZR-600DHP2
DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
endef
TARGET_DEVICES += buffalo-wzr-600dhp2
define Device/buffalo-wzr-900dhp
DEVICE_TITLE := Buffalo WZR-900DHP
DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
endef
TARGET_DEVICES += buffalo-wzr-900dhp
define Device/buffalo-wzr-1750dhp
DEVICE_TITLE := Buffalo WZR-1750DHP
DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
endef
TARGET_DEVICES += buffalo-wzr-1750dhp
define Device/dlink
IMAGES := bin
IMAGE/bin := append-ubi | seama-nand
endef
define Device/dlink-dir-885l
DEVICE_TITLE := D-Link DIR-885L
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
$(Device/dlink)
SIGNATURE := wrgac42_dlink.2015_dir885l
endef
TARGET_DEVICES += dlink-dir-885l
define Device/linksys-ea6300-v1
DEVICE_TITLE := Linksys EA6300 V1
DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
endef
# Disabled due to problems with 2 TRX partitions
# TARGET_DEVICES += linksys-ea6300-v1
define Device/netgear
IMAGES := chk
IMAGE/chk := append-ubi | trx-nand | netgear-chk
NETGEAR_REGION := 1
endef
define Device/netgear-r6250
DEVICE_TITLE := Netgear R6250
DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H245T00_NETGEAR
endef
define Device/netgear-r6300-v2
DEVICE_TITLE := Netgear R6300 V2
DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H240T00_NETGEAR
endef
define Device/netgear-r7000
DEVICE_TITLE := Netgear R7000
DEVICE_PACKAGES := $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H270T00_NETGEAR
endef
TARGET_DEVICES += netgear-r7000
define Device/netgear-r7900
DEVICE_TITLE := Netgear R7900
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H315T30_NETGEAR
endef
TARGET_DEVICES += netgear-r7900
define Device/netgear-r8000
DEVICE_TITLE := Netgear R8000
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H315T00_NETGEAR
endef
define Device/netgear-r8500
DEVICE_TITLE := Netgear R8500
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
$(Device/netgear)
NETGEAR_BOARD_ID := U12H334T00_NETGEAR
endef
# TARGET_DEVICES += netgear-r8500
define Device/smartrg-sr400ac
DEVICE_TITLE := SmartRG SR400ac
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
IMAGES := trx
IMAGE/trx := append-rootfs | trx-serial
endef
define Device/tenda-ac9
DEVICE_TITLE := Tenda AC9
DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES)
IMAGES := trx
IMAGE/trx := append-rootfs | trx-serial
endef
TARGET_DEVICES += tenda-ac9
define Device/tplink-archer-c9-v1
DEVICE_TITLE := TP-LINK Archer C9 V1
DEVICE_PACKAGES := $(USB3_PACKAGES)
IMAGES := bin
IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
TPLINK_BOARD := ARCHERC9
endef
TARGET_DEVICES += tplink-archer-c9-v1
TARGET_DEVICES += \
netgear-r6250 netgear-r6300-v2 netgear-r8000 \
smartrg-sr400ac
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink