openwrtv3/target/linux/ramips/dts/FREESTATION5.dts
John Crispin 55fb6f3a05 ralink: update patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37016
2013-06-23 15:50:49 +00:00

104 lines
1.8 KiB
Text

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "FREESTATION5", "ralink,rt3050-soc";
model = "ARC FreeStation5";
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x01>;
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
poe: gpio-regulator {
// Used to enable power-over-ethernet passthrough from port0 to port1.
// Disable passthrough by default to prevent accidental equipment damage.
compatible = "regulator-gpio";
regulator-name = "poe-power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-gpio = <&gpio0 12 0>;
};
gpio-leds {
compatible = "gpio-leds";
// The following leds are defined in the ArcOS firmware, but reportedly
// not present in the Freestation5 device.
wifi {
label = "freestation:unknown:wifi";
gpios = <&gpio0 7 1>;
};
powerg {
label = "freestation:unknown:powerg";
gpios = <&gpio0 9 1>;
};
usb {
label = "freestation:unknown:usb";
gpios = <&gpio0 14 1>;
};
};
};