openwrtv3

No description

Find a file

Jonas Gorski 55f65c5c1d toolchain: uclibc: fix typo in uclibc common config Based on a patch from Oliver Metz. Closes #10735. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35709		2013-02-21 11:45:07 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	kernel: update linux 3.8-rcX to 3.8	2013-02-19 09:17:38 +00:00
package	package/kernel: add package for the Gianfar PTP driver	2013-02-20 19:14:20 +00:00
scripts	buildroot: allow specifying libc personality for external toolchains	2013-02-20 15:06:10 +00:00
target	mpc85xx: add kmod-leds-gpio to the default packages	2013-02-21 10:26:03 +00:00
toolchain	toolchain: uclibc: fix typo in uclibc common config	2013-02-21 11:45:07 +00:00
tools	firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1	2013-02-13 16:51:24 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	allow using sstrip with musl	2013-01-29 23:05:43 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	fix ARCH_SUFFIX for mips64{,el}r2	2013-02-20 06:49:02 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org