openwrtv3/target/linux/brcm2708/patches-3.18/0097-bcm2709-Port-pps-gpio-and-i2c-patches.patch
John Crispin 9b74de00f7 brcm2708: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44433
2015-02-13 07:38:27 +00:00

91 lines
3.1 KiB
Diff

From aca6741a1d26736f6000d18b3c60a18a313be6ea Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 26 Jan 2015 17:40:22 +0000
Subject: [PATCH 097/114] bcm2709: Port pps-gpio and i2c patches
---
arch/arm/mach-bcm2709/bcm2709.c | 41 +++++++++++++++++++++++++++++++++++++++--
1 file changed, 39 insertions(+), 2 deletions(-)
--- a/arch/arm/mach-bcm2709/bcm2709.c
+++ b/arch/arm/mach-bcm2709/bcm2709.c
@@ -37,6 +37,7 @@
#include <linux/spi/spi.h>
#include <linux/gpio/machine.h>
#include <linux/w1-gpio.h>
+#include <linux/pps-gpio.h>
#include <linux/version.h>
#include <linux/clkdev.h>
@@ -95,6 +96,8 @@ static unsigned disk_led_active_low = 1;
static unsigned reboot_part = 0;
static unsigned w1_gpio_pin = W1_GPIO;
static unsigned w1_gpio_pullup = W1_PULLUP;
+static int pps_gpio_pin = -1;
+static bool vc_i2c_override = false;
static unsigned use_dt = 0;
@@ -283,6 +286,19 @@ static struct platform_device w1_device
};
#endif
+static struct pps_gpio_platform_data pps_gpio_info = {
+ .assert_falling_edge = false,
+ .capture_clear = false,
+ .gpio_pin = -1,
+ .gpio_label = "PPS",
+};
+
+static struct platform_device pps_gpio_device = {
+ .name = "pps-gpio",
+ .id = PLATFORM_DEVID_NONE,
+ .dev.platform_data = &pps_gpio_info,
+};
+
static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
static struct platform_device bcm2708_fb_device = {
@@ -860,6 +876,16 @@ void __init bcm2709_init(void)
#ifdef CONFIG_BCM2708_GPIO
bcm_register_device_dt(&bcm2708_gpio_device);
#endif
+
+#if defined(CONFIG_PPS_CLIENT_GPIO) || defined(CONFIG_PPS_CLIENT_GPIO_MODULE)
+ if (!use_dt && (pps_gpio_pin >= 0)) {
+ pr_info("bcm2709: GPIO %d setup as pps-gpio device\n", pps_gpio_pin);
+ pps_gpio_info.gpio_pin = pps_gpio_pin;
+ pps_gpio_device.id = pps_gpio_pin;
+ bcm_register_device(&pps_gpio_device);
+ }
+#endif
+
#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
w1_gpio_pdata.pin = w1_gpio_pin;
w1_gpio_pdata.ext_pullup_enable_pin = w1_gpio_pullup;
@@ -884,8 +910,15 @@ void __init bcm2709_init(void)
bcm_register_device(&bcm2835_thermal_device);
bcm_register_device_dt(&bcm2708_spi_device);
- bcm_register_device_dt(&bcm2708_bsc0_device);
- bcm_register_device_dt(&bcm2708_bsc1_device);
+
+ if (vc_i2c_override) {
+ bcm_register_device_dt(&bcm2708_bsc0_device);
+ bcm_register_device_dt(&bcm2708_bsc1_device);
+ } else if ((boardrev & 0xffffff) == 0x2 || (boardrev & 0xffffff) == 0x3) {
+ bcm_register_device_dt(&bcm2708_bsc0_device);
+ } else {
+ bcm_register_device_dt(&bcm2708_bsc1_device);
+ }
#if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE)
bcm_register_device_dt(&bcm2708_i2s_device);
@@ -1245,3 +1278,7 @@ module_param(disk_led_active_low, uint,
module_param(reboot_part, uint, 0644);
module_param(w1_gpio_pin, uint, 0644);
module_param(w1_gpio_pullup, uint, 0644);
+module_param(pps_gpio_pin, int, 0644);
+MODULE_PARM_DESC(pps_gpio_pin, "Set GPIO pin to reserve for PPS");
+module_param(vc_i2c_override, bool, 0644);
+MODULE_PARM_DESC(vc_i2c_override, "Allow the use of VC's I2C peripheral.");